Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Reflector Antennas”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Satellite-aided mobile radio concepts study: Concept definition of a satellite-aided mobile and personal radio communication system

The satellite system requires the use of a large satellite antenna and spacecraft array power of about 12 kW or more depending on the operating frequency. Technology developments needed include large offset reflector multibeam antennas, satellite electrical power sybsystems providing greater than 12 kW of power, signal switching hardware, and linearized efficient solid state amplifiers for the satellite-aided mobile band. Presently there is no frequency assignment for this service, and it is recommended that an allocation be pursued. The satellite system appears to be within reasonable extrapolation of the state of the art. It is further recommended that the satellite-aided system spacecraft definition studies and supporting technology development be initiated.

Anderson, R. E.↗
NASA NTRS1983

Wrap-rib antenna concept development overview

The wrap rib antenna design of a parabolic reflector large space antenna is discussed. Cost estimates, design/mission compatibility, deployment sequence, ground based tests, and fabrication are discussed.

Woods, A. A., Jr.↗
NASA NTRS2010

Faster Antenna Noise Temperature Calculations Using a Novel Approximation Technique

In order to properly tradeoff the various antenna and feed configurations for the Square Kilometre Array (SKA) optical design it is necessary to evaluate the gain and noise temperature of each configuration over a wide range of frequencies. German Cortes describes the standard technique for computing antenna noise temperature. However, since the total antenna pattern needs to be calculated over the entire 4 pi steradians at a fine enough resolution to accurately include the main beam, the computer time required is enormous. Even at modest frequencies and reflector sizes (approximately 5 to 10 GHz for a 12 meter main reflector) the technique can take days on a single node of a supercomputer. Utilizing the standard technique to compute the noise temperature for all the cases required to properly characterize the SKA design is clearly not feasible. At least a 100 to 1000 speedup in the computation time is required. This paper describes an approximation technique that can accomplish this improvement with extremely small errors in noise temperature calculation of a few tenths of Kelvin.

Reflector Antennas↗
NASA NTRS1995

Tilting A Small Reflector For Vernier Pointing Of A Large Antenna

Simple vernier pointing technique devised to facilitate scanning beam pointing of large paraboloidal reflector so line of sight of antenna sweeps out narrow cone about fixed axis (conical scan, also known as "conscan" in art). Scan effected by one of relatively small beam-waveguide reflectors or mirrors that couple signals between antenna and distant transmitting and/or receiving electronic circuits. Easier to tilt small mirror than to tilt massive antenna structure.

Veruttipong, Watt↗
NASA NTRS1990

Minimizing distortion in truss structures via Tabu search

The shape control of large flexible space structures is of great interest to structural designers. A related problem is to seek ways to minimize the need for active controls by careful design and construction of the space structure. A tetrahedral truss structure that is used to support a precision segmented reflector or antenna surface is considered. The structure has a hexagonal platform and is characterized by the number of rings of members in the truss. For simplicity it is assumed that a flat truss geometry exists. Hence, all structural members and ball joints are required to have the same nominal length and diameter, respectively. Inaccuracies in the length of member or diameters of joints may produce unacceptable levels of surface distortion and internal forces. In the case of a truss structure supporting an antenna, surface distortions may cause unacceptable gain loss or pointing errors. The focus is solely on surface distortion, however, internal forces may be treated in a similar manner. To test the Tabu search code for DSQRMS the appropriate influence matrices are used for a flat, two-ring tetrahedral reflector truss generated by Green and Haftka (1989). In this example there are 102 members (NMEMB) and 31 ball joints (NJOINT) of the same nominal length, respectively. Hence, all the members may be interchanged and all the joints may be interchanged. In addition, 19 positions on the surface of the truss (NNODES) were used to measure error influences. After a variety of experiments a set of good parameters was choosen for Tabu search. The sample size at each iteration is 10*NMEMB and the short term memory size is 40. In addition four pruning rules were used to accelerate the search..

Kincaid, Rex K.↗
NASA NTRS1982

Multibeam antenna for 30/20 GHz advanced communications satellite using offset shaped, dual reflector surfaces

Progress in the Antenna Technology Study being performed by NASA to characterize an antenna system with a scaning beam with a half-power beam diameter of around 0.3 deg and a minimum width over which the sidelobes stay below the -30 dB level is reported. Continuous U.S. (CONUS) coverage is desired by the satellite antenna system, with 10-20 fixed beams for trunk coverage and a rapidly scanned narrow beam for customer premises. The design specifies 24 beamwidths from east to west and 10 beamwidths from south to north. Reflector parameters have been identified to optimally focus all beams from a planar feed array. An example of coverage expected with the design demonstrates optimized beams for Seattle, Oklahoma City, and Miami, with -3 dB contours in circles 0,25 deg in diameter and a peak directivity of 55 dB. Experimental work was scheduled for 1983.

Smoll, A. E.↗
NASA NTRS1973

Synthesis of multiple shaped beam antenna patterns

Results are presented of research into the problem of finding an excitation of a given antenna such that the desired radiation pattern is approximated to within acceptable limits. This is to be done in such a fashion that boundary conditions involving hardware limitations may be inserted into the problem. The intended application is synthesis of multiple shaped beam antennas. Since this is perhaps the most difficult synthesis problem an antenna engineer is likely to encounter, the approach taken was to include as a by-product capability for synthesizing simpler patterns. The synthesis technique has been almost totally computerized. The class of antennas which may be synthesized with the computer program are those which may be represented as planar (continuous or discrete) current distributions. The technique is not limited in this sense and could indeed by extended to include, for example, the synthesis of conformal arrays or current distributions on the surface of reflectors. The antenna types which the program is set up to synthesize are: line source, rectangular aperture, circular aperture, linear array, rectangular array, and arbitrary planar array.

Stutzman, W. L.↗
NASA NTRS2003

Hybrid Synthetic/Real Aperture Antenna for High Resolution Microwave Imaging

Observations of key hydrological parameters at the spatial and temporal scales required in the post-2002 era face significant technological challenges. These measurements are based on relatively low frequency thermal microwave emission (at 1.4 GHz for soil moisture and salinity, 10 GHz and up for precipitation, and 19 and 37 GHz for snow). The long wavelengths at these frequencies coupled with the high spatial and radiometric resolutions required by the various global hydrology missions necessitate the use of very large apertures. Two-dimensional Synthetic Thinned Array Radiometry (2-D STAR), though promising in the long term, has many technical challenges in the areas of power, and sensitivity for very large apertures (i.e. greater than 300 wavelengths). This paper will discuss an alternative approach to the pure 2-D STAR, which uses an offset parabolic cylinder reflector fed by multiple elements to form a 1-D STAR. In essence a single STAR element is composed of a feedhorn and parabolic cylinder reflector. The elements are sparsely arrayed and thus can share a single reflector. This antenna would have no moving parts once deployed, have much higher sensitivity than a Y-shaped 2-D STAR of equivalent size, many fewer receivers than that 2-D STAR, and the reflector could be made of a thin film and lightweight deployment system for high packing density. The instrument using this approach would be a cross track push broom imager. An overview of the design parameters, potential deployment mechanisms and applications will be presented.

Doiron, Terence A.↗
NASA NTRS2011

An Analysis of Near Fields of 34m Antennas of JPL/NASA Deep Space Network

This paper addresses the issue of calculating near fields of the 34m Beam Waveguide (BWG) antennas of the NASA/JPL Deep Space Network (DSN). Calculating the near fields of DSN antennas are of interest in receive mode where the transmitting signals from nearby flying objects such as helicopters and airplanes could interfere with the operation of sensitive RF receiving system of DSN antennas, and in the transmit mode where fields from high-powered DSN antennas interfere with receivers on nearby flying objects, as well as safety considerations for the operators and visitors to the grounds surrounding the antenna sites. A complete and detailed analysis has been performed using PO/PTD techniques, including surface errors and support struts effects. Some results are presented, including comparisons with preliminary field tests.

near fields↗
NASA NTRS2000

Integrated design and simulation for millimeter-wave antenna systems

In this paper the development and application of MODTool (Millimeter-wave Optics Design), a design tool that efficiently integrates existing millimeter-wave optics design software with a solid body modeler and thermal/structural analysis packages, will be discussed.

integrated software CAD physical optics reflector ↗
NASA NTRS2017

Performance Verification and Testing of the COWVR Instrument Antenna

The Compact Ocean Wind Vector Radiometer (COWVR) is a technology demonstration mission, developed at the Jet Propulsion Laboratory (JPL), and scheduled for launch in 2016. The goal of COWVR is to provide the same windvector retrieval accuracy of other instruments, like WindSat, while reducing the total mass and using less power. In this paper, we present an overview of the COWVR instrument, and a detailed description of the EM (Electromagnetic) modeling of the antenna system and the test campaign carried out at JPL to assess its performance. Special emphasis has been placed on assessing the accuracy of the predictions made with the RF (Radio Frequency) model. We will show that the predicted radiation patterns are accurate enough so one can use them for orbit radiometer calibration.

Radiation Patterns↗
NASA NTRS2015

Use of a Closed-Loop Tracking Algorithm for Orientation Bias Determination of an S-Band Ground Station

The Space Communications and Navigation (SCaN) Testbed project completed installation and checkout testing of a new S-Band ground station at the NASA Glenn Research Center in Cleveland, Ohio in 2015. As with all ground stations, a key alignment process must be conducted to obtain offset angles in azimuth (AZ) and elevation (EL). In telescopes with AZ-EL gimbals, this is normally done with a two-star alignment process, where telescope-based pointing vectors are derived from catalogued locations with the AZ-EL bias angles derived from the pointing vector difference. For an antenna, the process is complicated without an optical asset. For the present study, the solution was to utilize the gimbal control algorithms closed-loop tracking capability to acquire the peak received power signal automatically from two distinct NASA Tracking and Data Relay Satellite (TDRS) spacecraft, without a human making the pointing adjustments. Briefly, the TDRS satellite acts as a simulated optical source and the alignment process proceeds exactly the same way as a one-star alignment. The data reduction process, which will be discussed in the paper, results in two bias angles which are retained for future pointing determination. Finally, the paper compares the test results and provides lessons learned from the activity.

reflector antenna↗
NASA NTRS2015

Use of a Closed-Loop Tracking Algorithm for Orientation Bias Determination of an S-Band Ground Station

The Space Communications and Navigation (SCaN) Testbed project completed installation and checkout testing of a new S-Band ground station at the NASA Glenn Research Center in Cleveland, Ohio in 2015. As with all ground stations, a key alignment process must be conducted to obtain offset angles in azimuth (AZ) and elevation (EL). In telescopes with AZ-EL gimbals, this is normally done with a two-star alignment process, where telescope-based pointing vectors are derived from catalogued locations with the AZ-EL bias angles derived from the pointing vector difference. For an antenna, the process is complicated without an optical asset. For the present study, the solution was to utilize the gimbal control algorithms closed-loop tracking capability to acquire the peak received power signal automatically from two distinct NASA Tracking and Data Relay Satellite (TDRS) spacecraft, without a human making the pointing adjustments. Briefly, the TDRS satellite acts as a simulated optical source and the alignment process proceeds exactly the same way as a one-star alignment. The data reduction process, which will be discussed in the paper, results in two bias angles which are retained for future pointing determination. Finally, the paper compares the test results and provides lessons learned from the activity.

ground station↗
NASA NTRS1962

A Simple Beamshaping Device for Cassegrainian Antennas

A simple beamshaping modification for Cassegrainian systems is described. A qualitative analysis is used to describe this device as well as to explain the poor performance observed with an unmodified Cassegrainian system. Experimental data are presented on both the modified and unmodified systems. The modification reduces spillover by a factor of 2 to a value of only 1. 3%. Simultaneously, the aperture efficiency is increased from 50% for the unmodified system to 60% for the modified system. Field measurements on an 85- ft modified Cassegrainian system are described which experimentally verify the applicability of the modified subreflector to low-noise antenna design. The measured zenith antenna temperature for this system is 9. 5° K; measured aperture efficiency is 50%.

ANTENNA↗