Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Reaction Rates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Oxygen atom reaction with Shuttle materials at orbital altitudes - Data and experiment status

Significant surface characteristics changes have been noticed on materials that were exposed in the payload bay of the Space Shuttle Orbiter on the first four flights. The most notable change was mass loss of Kapton film used as a component of thermal blankets. This film exhibited as much as 35 percent mass loss on STS-3 and loss of material was noticed on all flights. Other changes consist of rapid aging of paints and oxidation of Torlon surfaces. A mechanism has been proposed for the effects described, which involves the interaction of these organic materials with atomic oxygen available at low earth orbital altitudes. Evidence derived from measurements made on Shuttle materials that supports this mechanism will be presented. Experiments planned for near-term Shuttle flights are being developed to obtain quantitative data on reaction rates.

Leger, L.↗

Sulfur trioxide in the lower atmosphere of Venus

Inconsistencies and ambiguities are noted by the present consideration of Pioneer Venus and Venera atmospheric composition measurement of Venus in the context of lower atmosphere thermodynamic equilibrium. Among the scenarios projected on the basis of assumed correctness for selected data subsets, the O2 and SO2 concentrations reported by the Pioneer Venus chromatograph and the H2O concentrations reported by Venera 11 suggest that large concentrations of SO3 are present in the lower atmosphere of Venus. Such SO3 concentrations lead, however, to difficulties in explaining the atmosphere at and above the cloud tops, and in addition require specific assumptions concerning chemical reaction rates at and near the surface.

Craig, R. A.↗

X-ray ionization and the Orion molecular cloud

Recent observations of the Orion Nebula with the imaging proportional counter and the high resolution imager on the Einstein Observatory satellite have revealed that the presumably young stars in that region are strong X-ray emitters. The densest portion of the molecular cloud, which is also the portion with the greatest diversity of molecular species, is a few square arc minutes in size, while its conventional center (the KL Nebula) lies within an arc minute of the peak of the X-ray emission. The X-rays from the stars impinge on the neighboring molecular cloud's core with such intensity that they significantly affect its ionization equilibrium and chemistry. The present investigation has the objective to provide a quantitative account of these effects. Attention is given to simple estimates of the magnitude of X-ray ionization and its variation throughout the cloud, ionization and reaction rates, and a choice of models.

Krolik, J. H.↗

Description of the plasma diagnostics package (PDP) for the OSS-1 Shuttle mission and JSC plasma chamber test in conjunction with the fast pulse electron gun (FPEG)

The objectives, equipment, and techniques for the plasma diagnostics package (PDP) carried by the OSS-1 instrument payload of the STS-4 and scheduled for the Spacelab-2 mission are described. The goals of the first flight were to examine the Orbiter-magnetoplasma interactions by measuring the electric and magnetic field strengths, the ionized particle wakes, and the generated waves. The RMS was employed to lift the unit out of the bay in order to allow characterization of the fields, EM interference, and plasma contamination within 15 m of the Orbiter. The PDP will also be used to examine plasma depletion, chemical reaction rates, waves, and energized plasma produced by firing of the Orbiter thrusters. Operation of the PDP was carried out in the NASA Space Environment Simulation Laboratory test chamber, where the PDP was used to assay the fields, fluxes, wave amplitudes, and particle energy spectra. The PDP instrumentation is also capable of detecting thermal ions, thermal electrons suprathermal particles, VHF/UHF EMI levels, and the S-band field strength.

Shawhan, S. D.↗

Atomic Oxygen Effects on Materials

One objective of this investigation has been to offer recommendations on the selection of metal samples to be exposed to ambient atomic oxygen on the STS-8 flight presently scheduled for August 30, 1983. (These samples constitute a small subgroup of a very large group of test specimens prepared by A. Whitaker and other members of the Physical Sciences Branch for this mission.) The metals selected and prepared for STS-8 are silver, lead, copper, nickel, tungsten, molybdenum, magnesium, platinum, and alloys of FeCrAl and NiCr. Literature data are reviewed concerning the oxidation properties of these materials with a view towards understanding which oxides might be formed, the state of the oxide (surface film or volatile form), and the reaction rate. In addition, various techniques for characterizing the parent metals and the surface oxides are reviewed.

Fromhold, A. T.↗

Electrocatalysis of fuel cell reactions: Investigation of alternate electrolytes

Oxygen reduction and transport properties of the electrolyte in the phosphoric acid fuel cell are studied. A theoretical expression for the rotating ring-disk electrode technique; the intermediate reaction rate constants for oxygen reduction on platinum in phosphoric acid electrolyte; oxygen reduction mechanism in trifluoromethanesulfonic acid (TFMSA), considered as an alternate electrolyte for the acid fuel cells; and transport properties of the phosphoric acid electrolyte at high concentrations and temperatures are covered.

Chin, D. T.↗

Direct simulations of chemically reacting turbulent mixing layers

The report presents the results of direct numerical simulations of chemically reacting turbulent mixing layers. The work consists of two parts: (1) the development and testing of a spectral numerical computer code that treats the diffusion reaction equations; and (2) the simulation of a series of cases of chemical reactions occurring on mixing layers. The reaction considered is a binary, irreversible reaction with no heat release. The reacting species are nonpremixed. The results of the numerical tests indicate that the high accuracy of the spectral methods observed for rigid body rotation are also obtained when diffusion, reaction, and more complex flows are considered. In the simulations, the effects of vortex rollup and smaller scale turbulence on the overall reaction rates are investigated. The simulation results are found to be in approximate agreement with similarity theory. Comparisons of simulation results with certain modeling hypotheses indicate limitations in these hypotheses. The nondimensional product thickness computed from the simulations is compared with laboratory values and is found to be in reasonable agreement, especially since there are no adjustable constants in the method.

Riley, J. J.↗

The annular flow electrothermal ramjet

The annular flow, electrothermal, plug ramjet is examined as a possible means of achieving rapid projectile acceleration to velocities for such applications as direct launch of spacebound payloads. The performance of this ramjet operating with hydrogen propellant is examined for cases where this working fluid is treated: (1) as a perfect gas, and (2) as a gas that is allowed to dissociate and ionize and then recombine with finite reaction rates in the nozzle. Performance results for these cases are compared to the performance of a conventional ramjet operating with perfect gas hydrogen propellant. The performance of the conventional ramjet is superior to that of the annular flow, electrothermal ramjet. However, it is argued that the mechanical complexities associated with conventional ramjet operation are difficult to attain, and for this reason the annular flow, electrothermal ramjet is more desirable as a launch system. Models are presented which describe both electrothermal plug ramjet and conventional ramjet operation, and it is shown that for a given flight velocity there is a rate of heat addition per unit propellant mass for which ramjet operation is optimized.

Shaw, B. D.↗

Physics of Nonmagnetic Relativistic Thermal Plasmas

A detailed treatment of the kinematics of relativistic systems of particles and photons is presented. In the case of a relativistic Maxwell-Boltzmann distribution of particles, the reaction rate and luminosity are written as single integrals over the invariant cross section, and the production spectrum is written as a double integral over the cross section differential in the energy of the produced particles (or photons) in the center-of-momentum system of two colliding particles. The results are applied to the calculation of the annihilation spectrum of a thermal electron-positron plasma, confirming previous numerical and analytic results. Relativistic thermal electron-ion and electron-electron bremsstrahlung are calculated exactly to lowest order, and relativistic thermal electron-positron bremsstrahlung is calculated in an approximate fashion. An approximate treatment of relativistic Comptonization is developed. The question of thermalization of a relativistic plasma is considered. A formula for the energy loss or exchange rate from the interaction of two relativistic Maxwell-Boltzmann plasmas at different temperatures is derived. Application to a stable, uniform, nonmagnetic relativistic thermal plasma is made. Comparison is made with other studies.

Dermer, C. D.↗

A measurement of stratospheric HO2 by ground-based millimeter-wave spectroscopy

Stratospheric perhydroxyl (HO2) was measured by using a sensitive mm-wave receiver to obtain spectroscopic line profiles of three rotational emission lines in the vicinity of 265.8 GHz. The observations were carried out over four days in September-October 1982 at Mauna Kea, Hawaii and yield good agreement with the column density and vertical distribution predicted above 35 km by three representative two-dimensional photochemical models employing JPL 82-57 reaction rates and chemistry. Contrasts between current theoretical predictions and previous observations by Anderson et al. (1981) are pointed out for HO2 in the 28 to 37-km range, along with the difficulty of joining the latter with the present measurements through a monotonically varying vertical profile for HO2. A possible explanation involving strong temporal and spatial variation in stratospheric water vapor content is suggested.

De Zafra, R. L.↗

The production spectrum of a relativistic Maxwell-Boltzmann gas

A formula is derived for use in the calculation of the spectrum of particles or photons produced through particle collisions in a Maxwell-Boltzmann gas. The result is valid for all temperatures and for the general case when the gas contains different mass particles. It is written in terms of a double integral over the cross section differential in the energy of the produced particles (or photons) in the center-of-momentum system of two colliding particles. Analytic expressions for the reaction rate and luminosity are also derived and reproduce the findings of previous work. Application to the problem of the annihilation spectrum from a relativistic Maxwell-Boltzmann electron-positron gas is made. Agreement is found between the present work and previous numerical and analytical studies.

Dermer, C. D.↗

Electrocatalysis of fuel cell reactions: Investigation of alternate electrolytes

Oxygen reduction and transport properties of the electrolyte in the phosphoric acid fuel cell are studied. The areas covered were: (1) development of a theoretical expression for the rotating ring disk electrode technique; (2) determination of the intermediate reaction rate constants for oxygen reduction on platinum in phosphoric acid electrolyte; (3) determination of oxygen reduction mechanism in trifluoreomethanesulfonic acid (TFMSA) which was considered as an alternate electrolyte for the acid fuel cells; and (4) the measurement of transport properties of the phosphoric acid electrolyte at high concentrations and temperatures.

Chin, D. T.↗

Laboratory studies of Kapton degradation in an oxygen ion beam

Results are presented from a preliminary laboratory investigation of the degradation of the widely used polyimide Kapton under oxygen ion bombardment. Recent space shuttle flights have shown that Kapton and some other materials exposed to the apparent ram flow of residual atmosphere (at orbital velocity in low Earth orbit) lose mass and change their optical properties. It was hypothesized that these changes are caused by chemical interaction with atomic oxygen, aided by the 5-eV impact energy of atmospheric oxygen atoms in the ram. The reaction rate under O(+) bombardment seemed to be independent of incident energy over a wide range of energies. Although the flux of thermal ions in this experiment was much greater than the accelerated flux, the observed Kapton degradation was limited to the beam area and ram flow direction. This is consistent with an activation energy above the thermal energies but well below the beam energies. The results reproduce well the material loss, optical changes, SEM surface structure, and ram directionality of the samples returned by the shuttle. These factors, along with the lack of degradation under argon ion bombardment, are convincing evidence for ram flow oxidation as the mechanism of degradation.

Ferguson, D. C.↗

Quantitation of Na+, K+-atpase Enzymatic Activity in Tissues of the Mammalian Vestibular System

In order to quantify vestibular Na(+), K(+)-ATPase, a microassay technique was developed which is sufficiently sensitive to measure the enzymatic activity in tissue from a single animal. The assay was used to characterize ATPase in he vestibular apparatus of the Mongolian gerbil. The quantitative procedure employs NPP (5 mM) as synthetic enzyme substrate. The assay relies upon spectrophotometric measurement (410 nm) of nitrophenol (NP) released by enzymatic hydrolysis of the substrate. Product formation in the absence of ouabain reflects both specific (Na(+), K(+)-ATPase) and non-specific (Mg(++)-ATPase) enzymatic activity. By measuring the accumulation of reaction product (NP) at three-minute intervals during the course of incubation, it is found that the overall enzymatic reaction proceeds linearly for at least 45 minutes. It is therefore possible to determine two separate reaction rates from a single set of tissues. Initial results indicate that total activity amounts to 53.3 + or - 11.2 (S.E.M.) nmol/hr/mg dry tissue, of which approximately 20% is ouabain-sensitive.

Kerr, T. P.↗

Catalytic surface effect on ceramic coatings for an aeroassisted orbital transfer vehicle

Surface catalytic efficiencies of glassy coatings were determined from a reaction boundary layer computation and arc-jet data. The catalytic efficiencies of the various coatings examined are discussed in terms of their reaction-rate constants. These constants are a function of the wall temperature (1290 K to 2000 K). In addition, the advantage of a thermal protection system for a bent biconic, aeroassisted orbital transfer vehicle with a low surface catalytic efficiency is discussed.

Steward, D. A.↗

Precision ozone vapor pressure measurements

The vapor pressure above liquid ozone has been measured with a high accuracy over a temperature range of 85 to 95 K. At the boiling point of liquid argon (87.3 K) an ozone vapor pressure of 0.0403 Torr was obtained with an accuracy of + or - 0.7 percent. A least square fit of the data provided the Clausius-Clapeyron equation for liquid ozone; a latent heat of 82.7 cal/g was calculated. High-precision vapor pressure data are expected to aid research in atmospheric ozone measurements and in many laboratory ozone studies such as measurements of cross sections and reaction rates.

Hanson, D.↗

The lower electronic states of ClOO - A computational investigation

Eight doublet and eight quartet states of ClOO were investigated by ab initio CI techniques. The potential energy surfaces of the four lowest energy doublet states of both A-double-prime and A-prime symmetry indicate that only the 1 2A-double-prime state is bound. In contrast to the model provided by the HO2 radical, all of the excited doublet states investigated were repulsive with respect to dissociation to Cl + O2 and metastable or bound with respect to dissociation to ClO + O. The transitions to the excited states investigated span the visible and near UV spectral regions, but the transition moments indicate that they are very weak. Since the photolysis products are the same as those of the rapid thermal dissociation, photolysis is not expected to be an important atmospheric process. The soft bending potential for the 1 2A-prime state and the shape of the 1 4A-double-prime state in the entrance channel of the ClO + O yields Cl + O2 reaction provide a qualitative explanation for the underprediction of the low temperature reaction rate by previous trajectory calculations.

Jafri, J. A.↗

Measurements of HO2 chemical kinetics with a new detection method

Research for the period from December 1, 1985 to May 31, 1986 is discussed, i.e., the reaction rate constant of HO2+O3 has been measured with a discharge-flow-tube apparatus. The HO2 radical was detected by the OH(A-X) photofragment emission produced from photodissociative excitation of HO2 at 147 nm. In the meantime, the optical emissions produced by the vacuum ultraviolet excitation of chemical species in the flow tube were investigated and used to examine the possibility for their interference with the HO2 detection. The research results are summarized below.

Lee, L. C.↗