Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Rate Constrained”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Does aspartic acid racemization constrain the depth limit of the subsurface biosphere?

Previous studies of the subsurface biosphere have deduced average cellular doubling times of hundreds to thousands of years based upon geochemical models. We have directly constrained the in situ average cellular protein turnover or doubling times for metabolically active micro-organisms based on cellular amino acid abundances, D/L values of cellular aspartic acid, and the in vivo aspartic acid racemization rate. Application of this method to planktonic microbial communities collected from deep fractures in South Africa yielded maximum cellular amino acid turnover times of ~89 years for 1 km depth and 27 C and 1 2 years for 3 km depth and 54 C. The latter turnover times are much shorter than previously estimated cellular turnover times based upon geochemical arguments. The aspartic acid racemization rate at higher temperatures yields cellular protein doubling times that are consistent with the survival times of hyperthermophilic strains and predicts that at temperatures of 85 C, cells must replace proteins every couple of days to maintain enzymatic activity. Such a high maintenance requirement may be the principal limit on the abundance of living micro-organisms in the deep, hot subsurface biosphere, as well as a potential limit on their activity. The measurement of the D/L of aspartic acid in biological samples is a potentially powerful tool for deep, fractured continental and oceanic crustal settings where geochemical models of carbon turnover times are poorly constrained. Experimental observations on the racemization rates of aspartic acid in living thermophiles and hyperthermophiles could test this hypothesis. The development of corrections for cell wall peptides and spores will be required, however, to improve the accuracy of these estimates for environmental samples.

Onstott, T. C.↗

CONSTRAINING THE SPIN-DOWN OF THE NEARBY ISOLATED NEUTRON STAR RX J0806.4-4123, AND IMPLICATIONS FOR THE POPULATION OF NEARBY NEUTRON STARS

The nearby isolated neutron stars (INSs) are a group of seven relatively slowly rotating neutron stars that show thermal X-ray spectra, most with broad absorption features. They are interesting both because they may allow one to determine fundamental neutron-star properties by modeling their spectra, and because they appear to be a large fraction of the overall neutron-star population. Here, we describe a series of XMM -Newton observations of the nearby INS RX J0806.4-4123, taken as part of larger program of timing studies. From these, we limit the spin-down rate to nu-dot=(-4.3+-2.3)x10{sub -16}Hz s{sup -1}. This constrains the dipole magnetic field to be <3.7 x 10{sup 13} G at 2sigma, significantly less than the field of approx10{sup 14} G implied by simple models for the X-ray absorption found at 0.45 keV. We confirm that the spectrum is thermal and stable (to within a few percent), but find that the 0.45 keV absorption feature is broader and more complex than previously thought. Considering the population of INSs, we find that magnetic field decay from an initial field of approx<3 x 10{sup 14} G accounts most naturally for their timing and spectral properties, both qualitatively and in the context of the models for field decay of Pons and collaborators.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Observationally Constrained Modeling of the Reactive Uptake of Isoprene-Derived Epoxydiols under Elevated Relative Humidity and Varying Acidity of Seed Aerosol Conditions

Isoprene is the non-methane volatile organic compound (VOC) emitted in largest amounts to the atmosphere, and it is a significant source of secondary organic aerosol (SOA) mass. The uptake of isoprene oxidation products followed by multiphase chemistry in fine particles is the key pathway to form isoprene epoxydiol-derived SOA (IEPOX-SOA). However, many parameters that relate to diffusion and reaction of IEPOX in the particle phase remain uncertain, since reaction kinetics previously measured in bulk aqueous phase solutions might be different from atmospheric aerosols. Here, we use simultaneous environmental chamber measurements of multiple parameters governing IEPOX-SOA formation at timescales of ~hours: particle size distribution, composition, and volatility of IEPOX-SOA to constrain the key parameters governing IE-POX-SOA formation under humid (i.e., 50% relative humidity, RH) and varying seed aerosol acidity conditions. Reducing the 2-methyltetrol (tetrol) reaction rate constants by a factor of 4 brings the model predictions in agreement with the IEPOX-SOA measurements with acidified ammonium bisulfate seed aerosols. For less acidic ammonium sulfate aerosols both the organo-sulfate (OS) and tetrol reaction rate constants need to be reduced to bring model predictions closer to chamber observations. Using the measured non-volatile content of IEPOX-SOA we constrain the oligomerization timescale of 2-methyltetrols. We find that the oligomerization timescale is 4 hours with acidified seed aerosols, but a much longer time scale of 24 hours is needed for non-acidified seed aerosols, indicating that the aerosol acidity greatly affects the oligomerization rate of tetrols. Here we show that the actual kinetics of IEPOX-SOA formation rate on aerosol seeds consisting of both ammonium bisulfate and ammonium sulfate are a factor of 4~5 slower under 50-60% RH conditions compared to their application in previous models, which were based on bulk aqueous solution measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Aemulus Project. III. Emulation of the Galaxy Correlation Function

Using the N-body simulations of the Aemulus Project, we construct an emulator for the nonlinear clustering of galaxies in real and redshift space. We construct our model of galaxy bias using the halo occupation framework, accounting for possible velocity bias. The model includes 15 parameters, including both cosmological and galaxy bias parameters. We demonstrate that our emulator achieves ~1% precision at the scales of interest, 0.1 h -1 Mpc < r < 10 h -1 Mpc, and recovers the true cosmology when tested against independent simulations. Our primary parameters of interest are related to the growth rate of structure, f, and its degenerate combination, fσ 8 . Using this emulator, we show that the constraining power on these parameters monotonically increases as smaller scales are included in the analysis, all the way down to 0.1 h -1 Mpc. For a BOSS-like survey, the constraints on fσ 8 from r < 30 h -1 Mpc scales alone are nearly a factor of two tighter than those from the fiducial BOSS analysis of redshift-space clustering using perturbation theory at larger scales. The combination of real- and redshift-space clustering allows us to break the degeneracy between f and σ 8, yielding an 11% constraint on f alone for a BOSS-like analysis. The current Aemulus simulations limit this model to surveys of massive galaxies. Future simulations will allow this framework to be extended to all galaxy target types, including emission-line galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

Observational Constraints on Warm Cloud Microphysical Processes Using Machine Learning and Optimization Techniques

We introduce new parameterizations for autoconversion and accretion rates that greatly improve representation of the growth processes of warm rain. The new parameterizations capitalize on machine‐learning and optimization techniques and are constrained by in situ cloud probe measurements from the recent Atmospheric Radiation Measurement Program field campaign at Azores. The uncertainty in the new estimates of autoconversion and accretion rates is about 15% and 5%, respectively, outperforming existing parameterizations. Our results confirm that cloud and drizzle water content are the most important factors for determining accretion rates. However, for autoconversion, in addition to cloud water content and droplet number concentration, we discovered a key role of drizzle number concentration that is missing in current parameterizations. The robust relation between autoconversion rate and drizzle number concentration is surprising but real, and furthermore supported by theory. Thus, drizzle number concentration should be considered in parameterizations for improved representation of the autoconversion process.

54 ENVIRONMENTAL SCIENCES↗

Kinetics of TATB and LX-17 Decomposition by Thermal Analysis

The kinetics of TATB decomposition have been investigated by thermal analysis (thermogravimetric analysis, TGA, and differential scanning calorimetry, DSC) at both LLNL and the University of Alabama Birmingham. This report summarizes progress in understanding from those results within the context of identifying the global reaction mechanism, i.e., sequential, autocatalytic, competitive, or some mixture thereof. A particularly important issue is how pressure affects both the reaction rate and enthalpy. The effect of pressure helps identify dominant mechanisms and construct and constrain a global mechanism that will work over a wide range of conditions. This memorandum is simply a snapshot of current progress and not a definitive interpretation. I have written it to organize work of others and my interpretations in a systematic manner with the intention of stimulating further advances in understanding. SDT data comes from Jen Montgomery at LLNL, and high-pressure DSC comes from Victoria Stanford and Sergey Vyazovkin at University of Alabama at Birmingham. Major observations and conclusions, some new and some not, are (1) outgassing below 150 °C prior to decomposition releases adsorbed water vapor, (2) outgassing between 150 and 250 °C may come primarily from intercalated water (3) initial thermal decomposition above 250 °C or so involves dehydration of TATB to create furazans, (4) quickly heating to higher temperatures in open pans with flowing gas leads primarily to TATB evaporation between 270 and 390 °C, (5) using a pinhole crucible at atmospheric pressure largely eliminates TATB sublimation, (6) at typical thermal analysis heat rates, the main stage of decomposition is described by a single mass loss process, and decomposition of residual material is spread over a wide range of thermal severity, (7) at typical thermal analysis heat rates and constant temperatures above 300 °C, heat release occurs in two overlapping peaks, with the first one a little faster than mass loss and the second on a little slower than mass loss, (8) total heat release increases significantly with heating rate and substantially with increased pressure, and (9) isothermal experiments at 340 °C indicate that the first exotherm increases by more with LX-17 than TATB, which suggests a possible chemical role of Kel-F decomposition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Protoplanetary Disks as (Possibly) Viscous Disks

Protoplanetary disks are believed to evolve on megayear timescales in a diffusive (viscous) manner as a result of angular momentum transport driven by internal stresses. Here we use a sample of 26 protoplanetary disks resolved by ALMA with measured (dust-based) masses and stellar accretion rates to derive the dimensionless α-viscosity values for individual objects, with the goal of constraining the angular momentum transport mechanism. We find that the inferred values of α do not cluster around a single value, but instead have a broad distribution extending from 10{sup −4} to 0.04. Moreover, they correlate with neither the global disk parameters (mass, size, surface density) nor the stellar characteristics (mass, luminosity, radius). However, we do find a strong linear correlation between α and the central mass accretion rate M-dot . This correlation is unlikely to result from the direct physical effect of M-dot on internal stress on global scales. Instead, we suggest that it is caused by the decoupling of stellar M-dot from the global disk characteristics in one of the following ways: (1) The behavior (and range) of α is controlled by a yet-unidentified parameter (e.g., ionization fraction, magnetic field strength, or geometry), ultimately driving the variation of M-dot . (2) The central M-dot is decoupled from the global accretion rate as a result of an instability, or mass accumulation (or loss in a wind or planetary accretion) in the inner disk. (3) Perhaps the most intriguing possibility is that angular momentum in protoplanetary disks is transported nonviscously, e.g., via magnetohydrodynamic winds or spiral density waves.

79 ASTRONOMY AND ASTROPHYSICS↗

Particle Response of Antenna-Coupled TES Arrays: Results from SPIDER and the Laboratory

Future mm-wave and sub-mm space missions will employ large arrays of multiplexed transition-edge-sensor (TES) bolometers. Such instruments must contend with the high flux of cosmic rays beyond our atmosphere that induce ‘glitches’ in bolometer data, which posed a challenge to data analysis from the Planck bolometers. Future instruments will face the additional challenges of shared substrate wafers and multiplexed readout wiring. Here, we explore the susceptibility of modern TES arrays to the cosmic ray environment of space using two data sets: the 2015 long-duration balloon flight of the SPIDER cosmic microwave background polarimeter, and a laboratory exposure of SPIDER flight hardware to radioactive sources. We find manageable glitch rates and short glitch durations, leading to minimal effect on SPIDER analysis. We constrain energy propagation within the substrate through a study of multi-detector coincidences and give a preliminary look at pulse shapes in laboratory data.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Retained Austenite Attributes and Mechanical Performance of Different Compositions of TRIP Steel Alloys

The main objective of this work is to correlate the different attributes of retained austenite phase in TRIP steel structure with its mechanical properties. Three different chemical compositions were used to produce TRIP steel alloys. The first alloy contains only silicon as a carbide precipitation inhibitor; in the second alloy, silicon is partially replaced with aluminum, while in the third alloy phosphorus is added to the silicon–aluminum alloy. These compositions were proposed in order to avoid the negative effect of silicon during galvanizing. These three steel alloys were cast, homogenized, hot-forged and then subjected to intercritical annealing treatment followed by cooling and isothermal treatment in salt bath with subsequent air-cooling. Microstructural characterization, using optical microscope, SEM and XRD, along with tensile testing was carried out. Retained austenite attributes include volume fraction, carbon content, total carbon content, retained austenite transformable index and its stability coefficient against strain-induced martensite (SIM) transformation. The effect of these attributes on the mechanical properties of the studied TRIP steel alloys was evaluated using tensile test date, i.e., ultimate tensile strength (UTS), ductility, yield strength to UTS ratio, performance index and strain-hardening exponent. The variation of strain-hardening rate and strain-hardening exponent with strain was also considered. The failure behavior of the studied steel alloys was investigated using SEM on tensile-tested specimens. The results show that Si/Al-alloy has the lowest retained austenite transformable index, lowest stability coefficient against SIM transformation, highest performance index and more stable and uniform variation in strain-hardening rate and strain-hardening exponent with strain. These properties satisfy the industrial constrains of the sheets used in automotive industry relating to better mechanical properties and galvanizability.

36 MATERIALS SCIENCE↗

Effect of residual stresses on the onset of yielding in a Zr-based metallic glass

Indentation experiments were performed on as-cast and elastically-bent-and-constrained Zr-based metallic glass samples to investigate the effect of strain rate and residual stresses on the onset of yielding in the material. The critical shear stress for the onset of yielding in the as-cast sample was found to be insensitive to the applied strain rate. By contrast, in the elastically-stressed sample, the maximum contact pressure from the Hertzian stress field at the onset of yielding was found to largely decrease under tensile residual stress, but only slightly increase under compressive residual stress. Despite the different residual stresses, the effective shear stress, i.e. the superimposition of residual and Hertzian stress fields, for the onset of yielding in the Zr-based metallic glass was essentially a constant. The constancy of the effective stress for the onset of yielding was discussed in light of a critical excess volume associated with the atomic structure upon loading.

99 GENERAL AND MISCELLANEOUS↗

PHYSICAL CONDITIONS IN A CORONAL MASS EJECTION FROM HINODE, STEREO, AND SOHO OBSERVATIONS

In the present work, we analyze multiwavelength observations from Hinode, Solar and Heliospheric Observatory (SOHO), and STEREO of the early phases of a coronal mass ejection (CME). We use Hinode/EIS and SOHO/UVCS high-resolution spectra to measure the physical properties of the CME ejecta as a function of time at 1.1 and 1.9 solar radii. Hinode/XRT images are used in combination with EIS spectra to constrain the high temperature plasma properties of the ejecta. SECCHI/EUVI, SECCHI/COR 1, SOHO/EIT, and SOHO/LASCO images are used to measure the CME trajectory, velocity, and acceleration. The combination of measurements of plane of the sky velocities from two different directions allows us to determine the total velocity of the CME plasma up to 5 solar radii. Plasma properties, dynamical status, thermal structure, and brightness distributions are used to constrain the energy content of the CME plasma and to determine the heating rate. We find that the heating is larger than the kinetic energy, and compare it to theoretical predictions from models of CME plasma heating and acceleration.

79 ASTRONOMY AND ASTROPHYSICS↗

SEEDS ADAPTIVE OPTICS IMAGING OF THE ASYMMETRIC TRANSITION DISK OPH IRS 48 IN SCATTERED LIGHT

We present the first resolved near-infrared imagery of the transition disk Oph IRS 48 (WLY 2-48), which was recently observed with ALMA to have a strongly asymmetric submillimeter flux distribution. H-band polarized intensity images show a ∼60 AU radius scattered light cavity with two pronounced arcs of emission, one from northeast to southeast and one smaller, fainter, and more distant arc in the northwest. K-band scattered light imagery reveals a similar morphology, but with a clear third arc along the southwestern rim of the disk cavity. This arc meets the northwestern arc at nearly a right angle, revealing the presence of a spiral arm or local surface brightness deficit in the disk, and explaining the east-west brightness asymmetry in the H-band data. We also present 0.8-5.4 μm IRTF SpeX spectra of this object, which allow us to constrain the spectral class to A0 ± 1 and measure a low mass accretion rate of 10{sup –8.5} M {sub ☉} yr{sup –1}, both consistent with previous estimates. We investigate a variety of reddening laws in order to fit the multiwavelength spectral energy distribution of Oph IRS 48 and find a best fit consistent with a younger, higher luminosity star than previous estimates.

79 ASTRONOMY AND ASTROPHYSICS↗

Top compositeness on Tevatron and LHC.

We explore the possibility that the right-handed top quark is composite. We examine the consequences that compositeness would have on t{bar t} production at the Tevatron, and derive a weak constraint on the scale of compositeness of order a few hundred GeV from the t{bar t} inclusive cross section. More detailed studies of differential properties of t{bar t} production could potentially improve this limit. We find that a composite top can result in an enhancement of the t{bar t} t{bar t} production rate at the LHC (of as much as 10{sup 3} compared to the Standatd Model four top rate). We explore observables which allow us to extract the four top rate from the backgrounds, and show that the LHC can either discover or constrain top compositeness for wide ranges of parameter space.

43 PARTICLE ACCELERATORS↗

Model-independent test of the FLRW metric, the flatness of the Universe, and non-local estimation of H {sub 0} r {sub d}

Using measurements of H ( z ) and d {sub A}( z ) from the Baryon Oscillation Spectroscopic Survey (BOSS) DR12 and luminosity distances from the Joint Lightcurve Analysis (JLA) compilation of supernovae (SN), we measure H {sub 0} {sub r} {sub d} without any model assumption. Our measurement of H {sub 0} r {sub d} = (10033.20{sup +333.10}{sub −371.81} (SN) ± 128.19 (BAO)) km s{sup −1} is consistent with Planck constrains for the flat ΛCDM model. We also report that higher expansion history rates h ( z ) (among the possibilities) as well as lower-bound values of H {sub 0} r {sub d} result in better internal consistency among the independent data ( H ( z ) r {sub d} and d {sub A}( z )/ r {sub d} from BAO at z =0.32 and z =0.57 and d {sub L} from JLA) we used in this work. This can be interpreted as an interesting and independent support of Planck cosmology without using any cosmic microwave background data. We then combine these observables to test the Friedmann-Lemaȋtre-Robertson-Walker (FLRW) metric and the flatness of the Universe in a model-independent way at two redshifts, namely 0.32 and 0.57, by introducing a new diagnostic for flat-FLRW, Θ( z ), which only depends on observables of BAO and SN data. Our results are consistent with a flat-FLRW Universe within 2σ.

79 ASTRONOMY AND ASTROPHYSICS↗

Tomographic constraints on gravity from angular redshift fluctuations in the late Universe

Fluctuations in sky maps of galaxy redshifts, dubbed angular redshift fluctuations (ARF), contain precise information about the growth rate of structures and the nature of gravity in the Universe. Specifically, ARFs constrain the combination of cosmological parameters H/H 0 fσ 8 (z), while being an intrinsically tomographic probe and largely insensitive to many observational systematic errors, all without requiring the assumption of any redshift-to-distance relation under a given fiducial cosmology. We present the first cosmological constraints derived from ARF by using Baryon Oscillation Spectroscopic Survey (BOSS) LOWZ(Low redshift(Z))+CMASS(Constant MASS) DR12(Data Release 12) galaxy samples, obtaining 7 per cent accurate constraints on H/H 0 fσ 8 (z) at more than 20 redshifts over the range z ϵ [0.26, 0.72]. Our best-fitting value is 10 per cent larger, but compatible at the 1.4σ level, than the ΛCDM expectation set by Planck observations of cosmic microwave background (CMB) radiation. In conclusion, our tomographic measurements, combined with these CMB data, provide one of the strongest constraints on the gravity index γ, $\gamma =0.44^{+0.09}_{-0.07}$, which lies within 2σ of the prediction of General Relativity (γGR ≃ 0.55).

79 ASTRONOMY AND ASTROPHYSICS↗

Testing the Formation Scenarios of Binary Neutron Star Systems with Measurements of the Neutron Star Moment of Inertia

Two low-mass (M < 1.4 M ⊙ ) neutron stars, J0737-3039B and the companion to J1756-2251, show strong evidence of being formed in an ultra-stripped supernova explosion (US-SN) with a ONeMg or Fe progenitor. In this paper, using systematically generated sets of equations of state we map out the relationship between the moment of inertia of J0737-3039A, a candidate for a moment of inertia measurement within a decade, and the binding energy of the two low-mass neutron stars. This relationship, similar to the I-Love-Q relations, is more robust than a previously explored correlation between the binding energy and the slope of the nuclear symmetry energy L. We find that, if either J0737-3039B or the J1756-2251 companion were formed in a US-SN, no more than 0.06 M ⊙ could have been lost from the progenitor core. Furthermore, a measurement of the moment of inertia of J0737-3039A to within 10% accuracy can discriminate between formation scenarios and, given current constraints on the predicted core mass loss, potentially rule them out. Advanced LIGO can potentially measure the neutron star tidal polarizability to equivalent accuracy which, using the I-Love-Q relations, would obtain similar constraints on the formation scenarios. Such information would help constrain important aspects of binary evolution used for population synthesis predictions of the rate of binary neutron star mergers and resulting electromagnetic and gravitational wave signals. Finally, further progress needs to be made in modeling the core-collapse process that leads to low-mass neutron stars, particularly in making robust predictions for the mass loss from the progenitor core.

79 ASTRONOMY AND ASTROPHYSICS↗

Estimating Drizzle Parameters by Aircraft Sampling

In-cloud supersaturation is calculated from aircraft derived measurements of the in-cloud vertical gradient of liquid water content, vertical velocity, the pt and 3 rd cloud droplet radius moments and a parameter related to the heat and mass transport during condensation and evaporation of cloud droplets. The aircraft data where taken during the VOCALS 2008 study in marine stratocumulus clouds off the coast of Chile. Approximately 16000 discrete samples, 2.5 meter in length, were used in the present analysis of in-cloud supersaturation and its variability, both of which are indicative of turbulent processes within the cloud and their significant impact on drizzle formation. Two additional drizzle parameters, the eddy persistence time and the variance of fluctuations in in-cloud droplet growth rate were also estimated from this data set. These results will help to constrain parameterizations of underlying turbulent microphysical processes of clouds and thereby advance the future development of warm cloud and precipitation models for climate simulation.

54 ENVIRONMENTAL SCIENCES↗

Constrained optimization framework for interface-aware sub-scale dynamics discrete closure model for multimaterial cells in Lagrangian cell-centered hydrodynamics

In this paper, we present the new discrete optimization-based interface-aware sub-scale dynamics (IA-SSD) closure model for multimaterial cells for Lagrangian cell-centered hydrodynamics. For the multimaterial cell, the kinematic and thermodynamic properties (e.g., velocity, density, pressure and internal energy) will typically vary between the materials. The discrete closure model is responsible for an accurate update of the thermodynamic states of the individual material components in the multimaterial cell, and for determining the nodal forces that move the vertices of the cell. The IA-SSD closure model consists of two stages — a bulk stage followed by a sub-scale stage. During the bulk stage, the total change in the volume of the cell, total force applied to the cell, and total work done on the cell are distributed between the materials to update their volume, velocity and total energy. This distribution is performed using volume fractions of the materials. During the second stage, sub-scale interactions of the materials inside the multimaterial cell are taken into account. At this stage, information about the topology of the materials inside the multimaterial cell is used, allowing the orientations of internal interfaces to be included in the model. Each material interacts in a pair-wise fashion with the materials with which it has a common boundary. The interactions are based on the solution of the acoustic Riemann problem between each pair of materials and are limited using physically justified constraints: positivity of volume, positivity of internal energy, and controlled rate of pressure relaxation. To determine the values of the limiter coefficients, a constrained-optimization framework is employed using a quadratic objective function with linear constraints. It is a first-of-its kind application of constrained optimization to develop discrete closure models in a more rigorous fashion. The pair-wise interaction between materials is essentially one dimensional in the direction that is normal to interface. Finally, for this reason, we demonstrate in this paper the performance of our new model on one dimensional numerical examples.

97 MATHEMATICS AND COMPUTING↗