SEARCH · Engineering Papers

Results for “ROMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

All sources NASA NTRS DOE OSTI

NASA NTRS1991

Non-volatile, high density, high speed, Micromagnet-Hall effect Random Access Memory (MHRAM)

The micromagnetic Hall effect random access memory (MHRAM) has the potential of replacing ROMs, EPROMs, EEPROMs, and SRAMs because of its ability to achieve non-volatility, radiation hardness, high density, and fast access times, simultaneously. Information is stored magnetically in small magnetic elements (micromagnets), allowing unlimited data retention time, unlimited numbers of rewrite cycles, and inherent radiation hardness and SEU immunity, making the MHRAM suitable for ground based as well as spaceflight applications. The MHRAM device design is not affected by areal property fluctuations in the micromagnet, so high operating margins and high yield can be achieved in large scale integrated circuit (IC) fabrication. The MHRAM has short access times (less than 100 nsec). Write access time is short because on-chip transistors are used to gate current quickly, and magnetization reversal in the micromagnet can occur in a matter of a few nanoseconds. Read access time is short because the high electron mobility sensor (InAs or InSb) produces a large signal voltage in response to the fringing magnetic field from the micromagnet. High storage density is achieved since a unit cell consists only of two transistors and one micromagnet Hall effect element. By comparison, a DRAM unit cell has one transistor and one capacitor, and a SRAM unit cell has six transistors.

Wu, Jiin C.↗

NASA NTRS1992

NASA Sea Ice Validation Program for the Defense Meteorological Satellite Program Special Sensor Microwave Imager

The history of the program is described along with the SSM/I sensor, including its calibration and geolocation correction procedures used by NASA, SSM/I data flow, and the NASA program to distribute polar gridded SSM/I radiances and sea ice concentrations (SIC) on CD-ROMs. Following a discussion of the NASA algorithm used to convert SSM/I radiances to SICs, results of 95 SSM/I-MSS Landsat IC comparisons for regions in both the Arctic and the Antarctic are presented. The Landsat comparisons show that the overall algorithm accuracy under winter conditions is 7 pct. on average with 4 pct. negative bias. Next, high resolution active and passive microwave image mosaics from coordinated NASA and Navy aircraft underflights over regions of the Beaufort and Chukchi seas in March 1988 were used to show that the algorithm multiyear IC accuracy is 11 pct. on average with a positive bias of 12 pct. Ice edge crossings of the Bering Sea by the NASA DC-8 aircraft were used to show that the SSM/I 15 pct. ice concentration contour corresponds best to the location of the initial bands at the ice edge. Finally, a summary of results and recommendations for improving the SIC retrievals from spaceborne radiometers are provided.

Cavalieri, Donald J.↗

NASA NTRS1992

Marine Magnetic Data Holdings of World Data Center-a for Marine Geology and Geophysics

The World Data Center-A for Marine Geology and Geophysics is co-located with the Marine Geology & Geophysical Data Center, Boulder, CO. Fifteen million digital marine magnetic trackline measurements are managed within the GEOphysical DAta System (GEODAS). The bulk of these data were collected with proton precision magnetometers under Transit Satellite navigational control. Along-track sampling averages about 1 sample per kilometer, while spatial density, a function of ship's track and survey pattern, range from 4 to 0.02 data points/sq. km. In the near future, the entire geophysical data set will be available on CD-ROM. The Marine Geology and Geophysics Division (World Data Center-A for MGG), of the National Geophysical Data Center, handles a broad spectrum of marine geophysical data, including measurements of bathymetry, magnetics, gravity, seismic reflection subbottom profiles, and side-scan images acquired by ships throughout the world's oceans. Digital data encompass the first three, while the latter two are in analog form, recorded on 35mm microfilm. The marine geophysical digital trackline data are contained in the GEODAS data base which includes 11.6 million nautical miles of cruise trackline coverage contributed by more than 70 organizations worldwide. The inventory includes data from 3206 cruises with 33 million digital records and indexing to 5.3 million track miles of analog data on microfilm.

Sharman, George F.↗

NASA NTRS1992

Geomagnetic Data from the US Magnetic Observatory Network

The United States operates a network of, at present, 13 ground-based magnetic observatories. Continuous, one-minute digital vector and scalar geomagnetic field values have been recorded for the last decade, and extend about five years further back for several stations. Periodic, 3-component absolute measurements of the magnetic field are made to provide baseline reference data with which to determine calibrated field view values at all intervals. These data are now being made available on CD-ROM. The quality of the data depends upon a number of factors, including the types of instrumentation used to monitor and measure the field, the procedures and equipment used to collect and process the data, and the quality controls employed to check the data for erroneous values. These various factors are described here for the U.S. digital geomagnetic observatory data. The observatories have been undergoing an evolution over the last 15 years that will continue to significantly improve the accuracy, precision, and availability of geomagnetic data.

Herzog, Donald C.↗

NASA NTRS1992

ASRM subscale plume deflector testing

This paper reports the results of the scale model (1/22) testing of candidate refractory materials to be used as surface coatings for a solid rocket motor plume deflector structure. Five ROM tests were conducted to acquire data to support the selection, thickness determination, and placement of the materials. All data acquisition was achieved through nonintrusive methods. The tests demonstrated that little or no reductions in performance of the full-scale deflector would be experienced if the most economical materials were selected for construction.

Douglas, Freddie, III↗

NASA NTRS1991

The Comet Halley archive: Summary volume

The contents are as follows: The Organizational History of the International Halley Watch; Operations of the International Halley Watch from a Lead Center Perspective; The Steering Group; Astrometry Network; Infrared Studies Network; Large-Scale Phenomena Network; Meteor Studies Network; Near-Nucleus Studies Network; Photometry and Polarimetry Network; Radio Science Network; Spectroscopy and Spectrophotometry Network; Amateur Observation Network; Use of the CD-ROM Archive; The 1986 Passage of Comet Halley; and Recent Observations of Comet Halley.

Sekanina, Zdenek↗

NASA NTRS1992

Derivation of surface properties from Magellan altimetry data

The fit of the Hagfors model to the Magellan altimetry data provides a means to characterize the surface properties of Venus. However, the derived surface properties are only meaningful if the model provides a good representation of the data. The Hagfors model provides a good representation of the data. The Hagfors model is generally a realistic fit to surface scattering properties of a nadir-directed antenna such as the Magellan altimeter; however, some regions of the surface of Venus are poorly described by the existing model, according to the goodness of fit parameter provided on the ARCDR CD-ROMs. Poorly characterized regions need to be identified and fit to new models in order to derive more accurate surface properties for use in inferring the geological processes that affect the surface in those regions. We have compared the goodness of fit of the Hagfors model to the distribution of features across the planet, and preliminary results show a correlation between steep topographic slopes and poor fits to the standard model, as has been noticed by others. In this paper, we investigate possible relations between many classes of features and the ability of the Hagfors model to fit the observed echo profiles. In the regions that are not well characterized by existing models, we calculate new models that compensate for topographic relief in order to derive improved estimates of surface properties. Areas investigated to date span from longitude 315 through 45, at all latitudes covered by Magellan. A survey of those areas yields preliminary results that suggest that topographically high regions are well suited to the current implementation of the Hagfors model. Striking examples of such large-scale good fits are Alpha Regio, the northern edges of Lada Terra, and the southern edge of Ishtar Terra. Other features that are typically well fit are the rims of coronae such as Heng-O and the peaks of volcanos such as Gula Mons. Surprisingly, topographically low regions, such as the ubiquitous plains areas, are modeled poorly in comparison. However, this generalization has has exceptions: Lakshmi Planum is an elevated region that is not well fit compared to the rest of neighboring Ishtar, while the southern parts of topographically low Guinevere Planitia are characterized quite well by the Hagfors model. Features that are candidates for improved models are impact craters, coronae, ridges of significant scale, complex ridged terrains, moderate-sized mountains, and sharp terrain boundaries. These features are chosen because the goodness of fit is likely to be most affected either by departures from normal incidence angles or by sharp changes in terrain type within a single footprint. Most large features that are elevated with respect to their surroundings will suffer from steep slope effects, and smaller coronae and impact craters will probably suffer due to rapid changes in their appearance within a single footprint (10-20 km).

Lovell, Amy J.↗

NASA NTRS1992

Data management in NOAA

NOAA has 11 terabytes of digital data stored on 240,000 computer tapes. There are an additional 100 terabytes (TB) of geostationary satellite data stored in digital form on specially configured SONY U-Matic video tapes at the University of Wisconsin. There are over 90,000,000 non-digital form records in manuscript, film, printed, and chart form which are not easily accessible. The three NOAA Data Centers service 6,000 requests per year and publish 5,000 bulletins which are distributed to 40,000 subscribers. Seventeen CD-ROM's have been produced. Thirty thousand computer tapes containing polar satellite data are being copied to 12 inch WORM optical disks for research applications. The present annual data accumulation rate of 10 TB will grow to 30 TB in 1994 and to 100 TB by the year 2000. The present storage and distribution technologies with their attendant support systems will be overwhelmed by these increases if not improved. Increased user sophistication coupled with more precise measurement technologies will demand better quality control mechanisms, especially for those data maintained in an indefinite archive. There is optimism that the future will offer improved media technologies to accommodate the volumes of data. With the advanced technologies, storage and performance monitoring tools will be pivotal to the successful long-term management of data and information.

Callicott, William M.↗

NASA NTRS1989

Aerodynamic Characteristics of a Proposed Personnel Launch System (PLS) Lifting-Body Configuration at Mach Numbers from 0.05 to 20.3

A wind-tunnel investigation was performed to determine the aerodynamic characteristics of a proposed lifting-body personnel launch system (PLS) configuration over a Mach range of 0.05 to 20.3. The test configuration had a low-aspect-ratio body with a flat undersurface and three fins on the upper aft body. Data are presented with a minimum of analysis. All of the experimental data were placed in a structured data base using the R:BASE system and are included on a CD-ROM available with this report.

Cruz, Christopher I.↗

NASA NTRS1993

Space nuclear thermal propulsion: Evaluation of PIPET at the INEL's CTF

The scope of the report is to evaluate the feasibility and provide a rough order of magnitude (ROM) estimate of cost and schedule for testing the PIPET Reactors in the Contained Test Facility (CTF). The topics are presented in viewgraph form and include the following: PIPET Facility requirements; existing CTF Facilities; CTF background; CTR report assumptions; ETS size information; ETS component arrangement evaluation; proposed ETS configuration; the cost evaluation results; and CTF schedule.

Hill, Thomas J.↗

NASA NTRS1993

NSSDC data listing

This document identifies, in a highly summarized way, all the data held at the NSSDC. These data cover astrophysics and astronomy, solar and space physics, planetary and lunar, and Earth science disciplines. They are primarily, but not exclusively, from past and ongoing NASA spaceflight missions. We first identify all the data electronically available through NSSDC's principal online (magnetic disk-based) and nearline (robotics jukebox-based) systems, and then those data available on CDROM's. Finally, we identify all NSSDC-held data, the majority of which are still offline on magnetic tape, film, etc., but including the electronically accessible and CD-ROM resident data of earlier sections. These comprehensive identifications are in the form of two listings, one for the majority of NSSDC-held data sets resulting from individual instruments flown on individual spacecraft, and the other listing for the remainder of NSSDC-held data sets which do not adhere to this spacecraft/experiment/dataset hierarchy. The latter listing is presented in two parts, one for the numerous source catalogs of the NSSDC-operated Astronomical Data Center, and the other for the remainder. Access paths to all these data, and to further information about each, are also given in the related sections of this Data Listing. Note that this document is a companion to the electronically accessible information files (in particular, the NASA Master Directory) at NSSDC which also identify NSSDC-resident (and other) data.

Horowitz, Richard↗

NASA NTRS1993

Data management in NOAA

The NOAA archives contain 150 terabytes of data in digital form, most of which are the high volume GOES satellite image data. There are 630 data bases containing 2,350 environmental variables. There are 375 million film records and 90 million paper records in addition to the digital data base. The current data accession rate is 10 percent per year and the number of users are increasing at a 10 percent annual rate. NOAA publishes 5,000 publications and distributes over one million copies to almost 41,000 paying customers. Each year, over six million records are key entered from manuscript documents and about 13,000 computer tapes and 40,000 satellite hardcopy images are entered into the archive. Early digital data were stored on punched cards and open reel computer tapes. In the late seventies, an advanced helical scan technology (AMPEX TBM) was implemented. Now, punched cards have disappeared, the TBM system was abandoned, most data stored on open reel tapes have been migrated to 3480 cartridges, many specialized data sets were distributed on CD ROM's, special archives are being copied to 12 inch optical WORM disks, 5 1/4 inch magneto-optical disks were employed for workstation applications, and 8 mm EXABYTE tapes are planned for major data collection programs. The rapid expansion of new data sets, some of which constitute large volumes of data, coupled with the need for vastly improved access mechanisms, portability, and improved longevity are factors which will influence NOAA's future systems approaches for data management.

Callicott, William M.↗

NASA NTRS1993

Design decisions from the history of the EUVE science payload

Some of the design issues that arose during the development of the EUVE science payload and solutions to the problems involved are examined. In particular, attention is given to the use of parallel and serial busses, the selection of the the ROM approach for software storage and execution, implementation of memory error detection and correction, and the selection of command structures. The early design decisions paid off in the timely delivery of the scientific payload and in the successful completion of the survey phase of the EUVE science mission.

Marchant, W.↗

NASA NTRS1990

Data storage technology comparisons

The role of data storage and data storage technology is an integral, though conceptually often underestimated, portion of data processing technology. Data storage is important in the mass storage mode in which generated data is buffered for later use. But data storage technology is also important in the data flow mode when data are manipulated and hence required to flow between databases, datasets and processors. This latter mode is commonly associated with memory hierarchies which support computation. VLSI devices can reasonably be defined as electronic circuit devices such as channel and control electronics as well as highly integrated, solid-state devices that are fabricated using thin film deposition technology. VLSI devices in both capacities play an important role in data storage technology. In addition to random access memories (RAM), read-only memories (ROM), and other silicon-based variations such as PROM's, EPROM's, and EEPROM's, integrated devices find their way into a variety of memory technologies which offer significant performance advantages. These memory technologies include magnetic tape, magnetic disk, magneto-optic disk, and vertical Bloch line memory. In this paper, some comparison between selected technologies will be made to demonstrate why more than one memory technology exists today, based for example on access time and storage density at the active bit and system levels.

Katti, Romney R.↗

NASA NTRS1993

Wide-bandwidth high-resolution search for extraterrestrial intelligence

A third antenna was added to the system. It is a terrestrial low-gain feed, to act as a veto for local interference. The 3-chip design for a 4 megapoint complex FFT was reduced to finished working hardware. The 4-Megachannel circuit board contains 36 MByte of DRAM, 5 CPLDs, the three large FFT ASICs, and 74 ICs in all. The Austek FDP-based Spectrometer/Power Accumulator (SPA) has now been implemented as a 4-layer printed circuit. A PC interface board has been designed and together with its associated user interface and control software allows an IBM compatible computer to control the SPA board, and facilitates the transfer of spectra to the PC for display, processing, and storage. The Feature Recognizer Array cards receive the stream of modulus words from the 4M FFT cards, and forward a greatly thinned set of reports to the PC's in whose backplane they reside. In particular, a powerful ROM-based state-machine architecture has been adopted, and DRAM has been added to permit integration modes when tracking or reobserving source candidates. The general purpose (GP) array consists of twenty '486 PC class computers, each of which receives and processes the data from a feature extractor/correlator board set. The array performs a first analysis on the provided 'features' and then passes this information on to the workstation. The core workstation software is now written. That is, the communication channels between the user interface, the backend monitor program and the PC's have working software.

Horowitz, Paul↗

NASA NTRS1992

Guide star catalogue data retrieval software 2

The Guide Star Catalog (GSC), being the largest astronomical catalog to date, is widely used by the astronomical community for all sorts of applications, such as statistical studies of certain sky regions, searches for counterparts to observational phenomena, and generation of finder charts. It's format (2 CD-ROM's) requires minimum hardware and is ideally suited for all sorts of conditions, especially observations. Unfortunately, the actual GSC data is not easily accessible. It takes the form of FITS tables, and the coordinates of the objects are given in one coordinate system (equinox 2000). The included reading software is rudimentary at best. Thus, even generation of a simple finder chart is not a trivial undertaking. To solve this problem, at least for PC users, GUIDARES was created. GUIDARES is a user-friendly program that lets you look directly at the data in the GSC, either as a graphical sky map or as a text table. GUIDARES can read a sampling of GSC data from a given sky region, store this sampling in a text file, and display a graphical map of the sampled region in projected celestial coordinates (perfect for finder charts). GUIDARES supports rectangular and circular regions defined by coordinates in the equatorial, ecliptic (any equinox) or galactic systems.

Smirnov, O. M.↗

NASA NTRS1992

UIT support observations archive

We are in the process of archiving the approximately 1.2Tbytes of imaging data acquired in support of UIT observations. The UIT is one of three telescopes comprising the ASTRO spacecraft and is a 38-cm f/9 Ritchey-Chretien telescope with wavelength coverage 1200 A to 3000 A and a 40 arcminute diameter field-of-view at 4 min FWHM resolution. During the ASTRO shuttle mission, there were 65 different pointings (some with multiple targets) of the UIT and hence 65 fields. Our support data of these fields were obtained with the KPNO and CTIO 0.9m telescopes and several of the 2048x2048 CCD's. Our images are typically about 20 acrminutes on a side and contain the entire UV target except for nearby galaxies, for which mosaiced images were created. All good quality images in the broadband and narrow band filters for every target are being archived. Though all of the UIT targets were well studied astronomical objects, these frames are many of the first large field format images of them and, when combined with the soon to be released UV frames, provide a unique dataset. These data were already used to address a wide variety of astronomical questions. Vacuum ultraviolet (VUV) observations were used to study star formation in a sample of nearby galaxies, since integrated VUV - optical colors provide the most sensitive available measure of the formation rate of massive stars. The blue stages later in stellar evolution are also being studied. These data allow more accurate determination of the helium and metallicities of hothorzontal branch stars. These data are being prepared to release to the public in CD-ROM format through the National Space Science Data Center.

Smith, Eric P.↗

NASA NTRS1993

A reference model for scientific information interchange

This paper presents an overview of an Information Interchange Reference Model (IIRM) currently being developed by individuals participating in the Consultative Committee for Space Data Systems (CCSDS) Panel 2, the Planetary Data Systems (PDS), and the Committee on Earth Observing Satellites (CEOS). This is an ongoing research activity and is not an official position by these bodies. This reference model provides a framework for describing and assessing current and proposed methodologies for information interchange within and among the space agencies. It is hoped that this model will improve interoperability between the various methodologies. As such, this model attempts to address key information interchange issues as seen by the producers and users of space-related data and to put them into a coherent framework. Information is understood as the knowledge (e.g., the scientific content) represented by data. Therefore, concern is not primarily on mechanisms for transferring data from user to user (e.g., compact disk read-only memory (CD-ROM), wide-area networks, optical tape, and so forth) but on how information is encoded as data and how the information content is maintained with minimal loss or distortion during transmittal. The model assumes open systems, which means that the protocols or methods used should be fully described and the descriptions publicly available. Ideally these protocols are promoted by recognized standards organizations using processes that permit involvement by those most likely to be affected, thereby enhancing the protocol's stability and the likelihood of wide support.

Reich, Lou↗