Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REPROCESSING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Extraction, Characterization, and Stability Studies of Bistriazinyl-Derived Carboxylic Acids

Separation of An(III) and Ln(III) ions will benefit the recycling of used nuclear fuel (UNF). For this purpose, many ligands have been tested over the years, and several separation processes have been successfully demonstrated on the laboratory scale. Current research aims at the development of new ligands that are built only with carbon, hydrogen, oxygen, and nitrogen (CHON), as they can be incinerated completely without secondary waste production. Here, we tested a new class of water-soluble ligands, the bistriazinyl-octa-carboxylic acids. One member, in particular, 2,6-bis-[5,6-di(3,4-dicarboxyphenyl)-1,2,4- triazin-3-yl]-pyridine (BTPOA), was found to be suitable for the selective separation of Am(III) and Cm(III) ions from Ln(III) ions and may act as a CHON alternative to its sulfonated analogue (SO 3 -Ph-BTP). BTPOA exhibited good extraction results and a high selectivity for Am(III) over Eu(III) ions. This ligand’s complexation of metal ions was further studied using potentiometric spectroscopy, as well as time-resolved laser-induced spectroscopy with Cm(III) and Eu(III) in aqueous HClO 4 and HNO 3 media. Conditional stability constants of each formed species were determined. In the HClO 4 system, Cm(III) formed three species (1:1, 1:2, and 1:3) through the stepwise addition of a single BTPOA molecule. On the other hand, in HNO 3 , Cm(III) formed two 1:2 complexes and one 1:3 complex, while the stepwise formation of three species was observed for Eu(III). The stability constants are comparable to the values for SO 3 -Ph-BTP. The radiolytic behavior of BTPOA was also investigated using electron pulse irradiation measurements to determine absolute rate coefficients (k) under ambient temperature conditions for the reaction of BTPOA with typical UNF reprocessing radical radiolysis products the hydrated electron (e aq − , k = (1.60 ± 0.02) × 10 10 M −1 s −1 ), the hydrogen atom (H • , k = (2.17 ± 0.03) × 10 9 M −1 s −1 ), and hydroxyl ( • OH, k = (6.95 ± 0.06) × 10 9 M −1 s −1 ) and nitrate (NO 3 • , k = (0.37 ± 0.02) × 10 7 M −1 s−1) radicals. These rate coefficients indicate that the radiolytic longevity of BTPOA should increase with HNO 3 concentration, owing to the consumption of e aq − /H • , by nitrate anions, and the replacement of • OH by the less reactive NO 3 • .

Diaz Gomez, Laura [Forschungszentrum Juelich (Germ↗
DOE OSTI2017

Adsorption Equilibrium and Modeling of Water Vapor on Reduced and Unreduced Silver-Exchanged Mordenite

This work is related to the removal of tritiated water and radioactive iodine from off-gases released during spent nuclear fuel reprocessing. Specifically, it is focused on the adsorption equilibrium of water on reduced silver mordenite (Ag 0 Z), which is the state-of-art solid adsorbent for iodine retention in the off-gas treatment. As the off-gases contain different gas species, including iodine and water, Ag 0 Z would take up iodine and water simultaneously during the adsorption process. Therefore, understanding the adsorption of water on Ag 0 Z is important and necessary for studying the performance of Ag 0 Z in off-gas treatment processes. The isotherms of water (nonradioactive water) on Ag 0 Z were obtained at temperatures of 25, 40, 60, 100, 150, and 200 °C with a continuous-flow adsorption system. The data were analyzed using the Heterogeneous Langmuir and generalized statistical thermodynamic adsorption (GSTA) models, and thermodynamic parameters of the isotherms were obtained from both models. Both models were found capable of describing the isotherms. Isotherms of water on the unreduced silver mordenite (AgZ) were also obtained at 25, 40, and 60 °C and parametrized by the GSTA model. Through the comparison of the isotherms of Ag 0 Z and AgZ, it was found that Ag 0 Z had a higher water adsorption capacity than AgZ. The comparison of their thermodynamic parameters suggested that the interaction of water molecules with the H + in Ag 0 Z was stronger than that with the Ag + in AgZ.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Organic and Aqueous Redox Speciation of Cu(III) Periodate Oxidized Transuranium Actinides

A hexavalent group actinide separation process could streamline used nuclear fuel recycle and waste management. The limiting factor to such a process compatible with current fuel dissolution practices is obtaining and maintaining hexavalent Am, in molar nitric acid due to the high reduction potential of the Am(VI)/Am(III) couple (1.68 V vs SCE). Two strong oxidants, sodium bismuthate and Cu(III) periodate, have demonstrated quantitative oxidation of Am under molar acid conditions and better than 50% recovery by diamyl amylphosphonate (DAAP) is possible under these same conditions. This work considers the use of Cu(III) periodate to oxidize Np(V) to Np(VI) and Pu(IV) to Pu(VI) and recover these elements by extraction with DAAP. A metal:oxidant ratio of 1:1.2 and 1:3 was necessary to quantitatively oxidize Np(V) and Pu(IV), respectively, to the hexavalent state. Extraction of hexavalent Np, Pu, and Am by 1 M DAAP in n-dodecane was measured using UV-Vis [Pu(VI), Am (VI)] and NIR [Np(VI)]. Distribution values of Am(VI) were found to match previous tracer level studies. The organic phase spectra of Np, Pu, and Am are presented and molar absorptivities are calculated for characteristic peaks. Hexavalent Pu was found to be stable in the organic phase while Np(VI) showed some reduction to Np(V) and Am was present as Am(III), Am(V), and Am(VI) species in aqueous and organic phases during the extraction experiments. These results demonstrate, for the first time, the ability to recover macroscopic amounts of americium that would be present during fuel reprocessing and are the first characterization of Am organic phase oxidation state speciation relevant to a hexavalent group actinide separation process under acidic conditions.

americium↗
DOE OSTI2020

Structural Features of Zirconium-Based Metal–Organic Frameworks Affecting Radiolytic Stability

Metal–organic frameworks (MOFs) NU-1000 and UiO-66 are herein exposed to two different gamma irradiation doses and dose rates and analyzed to determine the structural features that affect their stability in these environments. MOFs have shown promise for the capture and sensing of off-gases at civilian nuclear energy reprocessing sites, nuclear waste repositories, and nuclear accident locations. However, little is understood about the structural features of MOFs that contribute to their stability levels under the ionizing radiation conditions present at such sites. This study is the first of its kind to explore the structural features of MOFs that contribute to their radiolytic stability. Both NU-1000 and UiO-66 are MOFs that contain Zr metal-centers with the same metal absorption cross section. However, the two MOFs exhibit different linker connectivities, linker aromaticities, node densities, node connectivities, and interligand separations. In this study, NU-1000 and UiO-66 were exposed to high (423.3 Gy/min, 23 min, and 37 s) and low (0.78 Gy/min, 4320 min) dose rates of 60 Co gamma irradiation. NU-1000 displayed insignificant radiation damage under both dose rates due to its high linker connectivity, low node density, and low node connectivity. However, low radiation dose rates caused considerable damage to UiO-66, a framework with lower aromaticity and smaller interligand separation. Finally, results suggest that chronic, low-radiation environments are more detrimental to Zr MOF stability than acute, high-radiation conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Crystal and Electronic Structures of A 2 NaIO 6 Periodate Double Perovskites (A = Sr, Ca, Ba): Candidate Wasteforms for I-129 Immobilization

The synthesis, structure, and thermal stability of the periodate double perovskites A 2 NaIO 6 (A= Ba, Sr, Ca) were investigated in the context of potential application for the immobilization of radioiodine. A combination of X-ray diffraction and neutron diffraction, Raman spectroscopy, and DFT simulations were applied to determine accurate crystal structures of these compounds and understand their relative stability. The compounds were found to exhibit rock-salt ordering of Na and I on the perovskite B-site; Ba 2 NaIO 6 was found to adopt the Fm- 3 m aristotype structure, whereas Sr 2 NaIO 6 and Ca 2 NaIO 6 adopt the P 2 1 / n hettotype structure, characterized by cooperative octahedral tilting. DFT simulations determined the Fm- 3 m and P 2 1 / n structures of Ba 2 NaIO 6 to be energetically degenerate at room temperature, whereas diffraction and spectroscopy data evidence only the presence of the Fm- 3 m phase at room temperature, which may imply an incipient phase transition for this compound. The periodate double perovskites were found to exhibit remarkable thermal stability, with Ba 2 NaIO 6 only decomposing above 1050 °C in air, which is apparently the highest recorded decomposition temperature so far recorded for any iodine bearing compound. As such, these compounds offer some potential for application in the immobilization of iodine-129, from nuclear fuel reprocessing, with an iodine incorporation rate of 25–40 wt%. The synthesis of these compounds, elaborated here, is also compatible with both current conventional and future advanced processes for iodine recovery from the dissolver off-gas.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Multiplicity of Th(IV) and U(VI) HEH[EHP] Chelates at Low Temperatures from Concentrated Nitric Acid Extractions

Organophosphorus extractants have been widely investigated for lanthanide recovery from ore and for application in the reprocessing of spent nuclear fuel, such as in Advanced TALSPEAK schemes. Determining the speciation of the extracted metal complex in the organic phase remains a significant challenge. A better understanding of the variability of HEH[EHP]–actinide complexes and the speciation of chelates for tetra- and hexavalent actinides can improve the predictability of actinide phase transfer in such biphasic systems. Here, the extraction of Th(IV) and U(VI) from nitric acid media using HEH[EHP] in heptane is examined. The distribution ratio as a function of nitric acid concentration was quantified using UV–vis spectroscopy, and then the speciation of HEH[EHP]–metal complexes in the organic phase was investigated using Fourier transform infrared (FTIR) spectroscopy and low-temperature 31 P nuclear magnetic resonance (NMR) spectroscopy. In addition to perturbation of the vibrational modes proximal to the phosphonic moiety in HEH[EHP] in the FTIR spectra, the appearance of a nitrate signal was found in the organic phase following extraction from the highest acidity conditions for U(VI). The 31 P NMR spectra of the organic phase at a low temperature (-70 °C) exhibited a surprising number (n) of resonances (n ≥ 7 for Th(IV) and n ≥ 11 for U(VI)), with the distribution between these resonances changing with the initial concentration of nitric acid in the aqueous phase. These results indicate that the compositions of the inner and outer spheres of the extracted actinides in the organic phase are more diverse than initially thought.

31P NMR↗
DOE OSTI2023

Influencing Bonding Interactions of the Neptunyl (V, VI) Cations with Electron-donating and -withdrawing Groups

Neptunium makes up the largest percentage of minor actinides found in spent nuclear fuel, yet separations of this element have proven difficult due to its rich redox chemistry. Developing new reprocessing techniques should rely on understanding how to control the Np oxidation state and its interactions with different ligands. Designing new ligands for separations requires understanding how to properly tune a system toward a desired trait through functionalization. Emerging technologies for minor actinide separations focus on ligands containing carboxylate or pyridine functional groups, which are desirable due to their high degree of functionalization. So we use DFT calculations to study the interactions of carboxylate and polypyridine ligands with the neptunyl cation [Np(V/VI)O2] +/2+ . A systematic study is performed by varying the electronic properties of the carboxylate and polypyridine ligands through the inclusion of different electron-withdrawing and electron-donating R groups. We focus on how these groups can affect geometric properties, electronic structure, and bonding characterization as a function of the metal oxidation state and ligand character and discuss how these factors can play a role in neptunium ligand design principles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Elucidating Actinide–Pertechnetate and Actinide–Perrhenate Bonding via a Family of Th–TcO 4 and Th–ReO 4 Frameworks and Solutions

Technetium-99, a β-emitter produced from 235 U fission, poses a challenge for the nuclear industry due to co-extraction of pertechnetate (TcO 4 – ) with the actinides (An) during nuclear fuel reprocessing. Previous studies suggested that direct coordination of pertechnetate with An plays an important role in the coextraction process. However, few studies have provided direct evidence for An–TcO 4 – bonding in the solid state, and even fewer in solution. The present study describes synthesis and structural elucidation of a family of thorium(IV)-pertechnetate/perrhenate (ReO 4 – , nonradioactive surrogate) compounds, which is obtained by dissolution of thorium oxyhydroxide in perrhenic/pertechnic acid followed by crystallization, with or without heating. For reaction ratios of 3:1, 4:1, and 6:1 MO 4 – /Th(IV) (M = Tc, Re), the crystallized compounds reflect the same ratio, suggesting facile and flexible coordination. Furthermore, nine structures reveal 1-dimensional and 2-dimensional frameworks with varying topologies. While a multitude of compounds isolated from 4:1 (and 6:1) reaction solutions feature Th monomers linked by MO 4 – , the 3:1 reaction solution yielded the well-known dihydroxide-bridged thorium dimer, linked, and capped by MO 4 – . Density functional theory calculations on ReO 4 – /TcO 4 – isomorphs suggest similar bonding characteristics in the solid state, but experimental solution characterization noted differences. Specifically, small-angle X-ray scattering studies suggest the bonding of Th–TcO 4 – persists in solution, while Th–ReO 4 – bonding is less apparent.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Structural Investigation of Technetium Dibutylphosphate Species Using X-ray Absorption Fine Structure Spectroscopy

The speciation of Tc after the extraction of Tc(IV) from H 2 O and 1 M HNO 3 by dibutylphosphoric acid (HDBP) in dodecane has been studied by X-ray absorption fine structure (XAFS) spectroscopy. Results show the formation of dimeric species with Tc 2 O 2 and Tc 2 O units, and the formulas [Tc 2 O 2 (DBP·HDBP) 4 ] (1) and [Tc 2 O(NO 3 ) 2 (DBP) 2 (DBP·HDBP) 2 ] (2) were, respectively, proposed for the species extracted from H 2 O and 1 M HNO 3 . The interatomic Tc–Tc distances found in the Tc 2 O 2 and Tc 2 O units [2.55(3) and 3.57(4) Å, respectively] are similar to the ones found in Tc(IV) dinuclear species. It is likely that the speciation of Tc(IV) in dodecane is due to the extraction of a species with a Tc 2 O unit for (2) and to the redissolution of a Tc(IV)-DBP solid for (1). The XAFS results for (1) and (2) were compared to that obtained for the extraction of Tc(IV) with TBP/HDBP/dodecane from 0.5 M HNO 3 , (3) which highlight the formation of Tc mononuclear nitrate species {i.e. [Tc(NO 3 ) 3 (DBP)] or [Tc(NO 3 ) 2 (DBP·HDBP)]}. These results confirm the importance of the preparation and speciation of the Tc(IV) aqueous solutions prior to extraction and how much this influences and drives the final Tc speciation in organic extraction. Here, these studies outline the complexity of Tc separation chemistry and provide insights into the behavior of Tc during the reprocessing of used nuclear fuel.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Influence of Nd(II) and Nd(III) Ions on the Speciation and Kinetic Dynamics of Radiolytic Transients in Molten LiCl-KCl Eutectic Salt Mixtures

In the pyrochemical reprocessing of used nuclear fuel, understanding the effects of ionizing radiation on the chemical behavior of fission products in molten chloride eutectic salt is crucial. Here, this study investigates the impact of radiation on the chemical and kinetic speciation of Nd ions in molten LiCl-KCl eutectic, which are challenging to separate due to their multivalent oxidation states and comproportionation reactions. Electron pulse radiolysis techniques were used to determine transient absorption spectra, chemical kinetics, and activation parameters for the reaction of Nd ions with the primary products of molten LiCl-KCl eutectic radiolysis: the solvated electron (e S - ) and dichlorine radical anion (Cl 2 •- ). Initially, Nd(III) reacted rapidly with e S - , forming Nd(II) with a second-order rate coefficient of k = (4.54 ± 0.07) × 10 10 M -1 s -1 at 673 K. The resulting Nd(II) ions then reacted slowly with Cl 2 •- , regenerating Nd(III) with an estimated rate of k = (1.72 ± 0.04) × 10 10 M -1 s -1 at 673 K. Additionally, the comproportionation reaction of Nd(III) and Nd(s) to form Nd(II) was monitored chemically and electrochemically. This work suggests that the comproportionation reaction of Nd(III) with Nd(s) to form Nd(II) is unstable in molten LiCl-KCl eutectic.

36 - MATERIALS SCIENCE↗
DOE OSTI2018

Spectroscopic Characterization of Aqua [ fac -Tc(CO) 3 ] + Complexes at High Ionic Strength

Understanding fundamental Tc chemistry is important to both the remediation of nuclear waste and the reprocessing of nuclear fuel; however, current knowledge of the electronic structure and spectral signatures of low-valent Tc compounds significantly lags behind the remainder of the d-block elements. In particular, identification and treatment of Tc speciation in legacy nuclear waste is challenging due to the lack of reference data especially for Tc compounds in the less common oxidation states (I–VI). In an effort to establish a spectroscopic library corresponding to the relevant conditions of extremely high ionic strength typical for the legacy nuclear waste, compounds with the general formula of [ fac -Tc(CO) 3 (OH 2 ) 3– n (OH) n ] 1– n (where n = 0–3) were examined by a range of spectroscopic techniques including 99 Tc/ 13 C NMR, IR, XPS, and XAS. In the series of monomeric aqua species, stepwise hydrolysis results in the increase of the Tc metal center electron density and corresponding progressive decrease of the Tc–C bond distances, Tc electron binding energies, and carbonyl stretching frequencies in the order [ fac -Tc(CO) 3 (OH 2 ) 3 ] > [ fac -Tc(CO) 3 (OH 2 ) 2 (OH)] > [ fac -Tc(CO) 3 (OH 2 )(OH) 2 ] – . These results correlate with established trends of the 99 Tc upfield chemical shift and carbonyl 13 C downfield chemical shift. The lone exception is [ fac -Tc(CO) 3 (OH)] 4 which exhibits a comparatively low electron density at the metal center attributed to the μ 3 -bridging nature of the –OH ligands causing less σ-donation and no π-donation. As a result, this work also reports the first observations of these compounds by XPS and [ fac -Tc(CO) 3 Cl 3 ] 2– by XAS. The unique and distinguishable spectral features of the aqua [ fac -Tc(CO) 3 ] + complexes lay the foundation for their identification in the complex aqueous matrixes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Hydrolysis Reaction Pathways of Thorium Oxide Nanoclusters

Density functional theory benchmarked by correlated molecular orbital theory is used to develop a fundamental and predictive understanding of the interaction of thorium oxide nanoclusters with gas phase water to provide insight into nuclear-waste storage, production of thorium nuclear reactor fuels, and reprocessing of spent fuel. The structures of Th n O 2n (n = 3 – 6) clusters and their interactions with water have been studied at the B3LYP, MP2, and CCSD(T) levels. Hydrolysis is initiated by the formation of Lewis acid-base adducts, with relative H 2 O binding energies (physisorption) ranging from −15 kcal/mol to −22 kcal/mol. The initial H 2 O physisorption energy is ca. −21 kcal/mol regardless of the cluster size and is consistent with the experimentally obtained initial adsorption energy on a thorium dioxide surface. The physisorption enthalpies for additional water molecules can be affected by the presence of terminal groups OH groups generated by proton transfer to a Th-O near the site of adsorption. The hydrolysis products (chemisorption) form either bridging or terminal hydroxides. More exothermic hydrolysis steps were predicted for the formation of terminal hydroxides as compared to the formation of bridging hydroxides. Here, the calculated transition state barriers for transfer of protons from bound water complexes to form the chemisorption products are very low. Overall, water readily reacts with thorium oxide clusters preferring hydroxide products over hydrated complexes. First and second order fits were predicted for the combined physisorption and chemisorption energies for the hydrolysis of thorium oxide clusters. Finally, ionization energies and electron affinities were calculated as were HOMO-LUMO gaps to provide additional insights into the properties of the thorium oxide and hydroxide clusters.

Adsorption↗
DOE OSTI2025

Radiation-Induced Chemical Yields of Carbon-Centered Radicals and Hydrogen Atoms from the Gamma Irradiation of n -Dodecane

Here, this study investigates the radiolytic yields of carbon-centered radicals and hydrogen atoms in n-dodecane under gamma irradiation. Utilizing molecular iodine (I 2 ) and 2,4,6-tri-tert-butylnitrosobenzene (3tBNB) as radical scavengers, we quantified the yields of molecular hydrogen and various carbon-centered radicals formed from bond scission of the solvent excited states. The yield of primary alkyl radicals was significantly lower than that of the secondary radicals, aligning with expected stabilities and bond dissociation energies. For the overall loss of n-dodecane, total yields of 0.598 ± 0.004 species/100 eV for C–C bond scission, 1.648 ± 0.012 species/100 eV for C–H bond scission, and 3.20 ± 0.10 species/100 eV for unimolecular H 2 elimination were determined. Notably, the I 2 scavenging data provided robust estimates, while the 3tBNB displayed lower efficiency in radical trapping. This research enhances our understanding of radiolytic processes in n-dodecane and offers insights for future studies on the behavior of hydrocarbons under ionizing radiation, with implications for improving UNF reprocessing strategies.

38 - RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCL↗
DOE OSTI2018

Molecular Hydrogen Yields from the Alpha Self-Radiolysis of Nitric Acid Solutions Containing Plutonium or Americium

The yield of molecular hydrogen, as a function of nitric acid concentration, from the a-radiolysis of aerated nitric acid and sulfuric acid mixtures containing plutonium or americium has been investigated. Comparison of experimental measurements with predictions of a Monte Carlo radiation track chemistry model shows that, in addition to scavenging of the hydrated electron, its precursor, and the hydrogen atom, the quenching of excited state water is important in controlling the yield of hydrogen. In addition, increases in solution acidity cause a significant change in the track reactions that can be explained as resulting from scavenging of e aq - by H aq + to form H • . While plutonium has been shown to be an effective scavenger of precursors of molecular hydrogen below 0.1 mol dm-3 nitrate, previously reported effects of plutonium on G(H 2 ) a between 1 and 10 mol dm -3 nitric acid were not reproduced. Modelling results suggest that plutonium is unlikely to effectively compete with nitrate ions in scavenging the precursors of molecular hydrogen at higher nitric acid concentrations and this was confirmed by comparing hydrogen yields from plutonium solutions with those from americium. Finally, comparison between the radionuclide, ion accelerator experiments and model predictions leads to the conclusion that the high dose rate of accelerator studies does not significantly affect the measured hydrogen yield. These reactions provide insight into the important processes for liquors common in the reprocessing of spent nuclear fuel and the storage of highly radioactive liquid waste prior to vitrification.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Aqueous Interfaces in Chemical Separations

Chemical separations play a vital role in refinery and reprocessing of critical materials, such as platinum group metals, rare earths, and actinides. The choice of separation system─whether it is liquid–liquid extraction (LLE), sorbents, or membranes─depends on specific needs and applications. In almost all separation processes, the desired metal ions adsorb or transfer across an aqueous interface, such as the solid/liquid interface in sorbents or oil/water interfaces in LLE. Despite these separation technologies being extensively used for decades, our understanding of the molecular-scale mechanisms governing ion adsorption and transport at interfaces remains limited. This knowledge gap presents a significant challenge in meeting the increasing demands for these critical materials due to their growing use in advanced technologies. Fortunately, recent advancements in surface-specific experimental and computational techniques offer promising avenues to bridge this gap and facilitate the development of next-generation separation systems. Interestingly, unanswered questions regarding interfacial phenomena in chemical separations hold great relevance to various fields, including energy storage, geochemistry, and atmospheric chemistry. Therefore, the model interfacial systems developed for studying chemical separations, such as amphiphilic molecules assembled at a solid/water, air/water, or oil/water interface, may have far-reaching implications, extending beyond separations and opening doors to addressing a wide range of scientific inquiries. This perspective discusses recent interfacial studies elucidating amphiphile–ion interactions in chemical separations of metal ions. Finally, these studies provide direct, molecular-scale information about solute and solvent behavior at aqueous interfaces, including multivalent and complex ions in highly concentrated solutions, which play key roles in LLE of critical materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Synthesis, Properties, and Metathesis Activity of Polyurethane Thermoplastics and Thermosets from a Renewable Polysesquiterpene Diol

Polyurethanes (PUs) are the sixth most commonly utilized plastic class, yet ∼80% of commodity material is landfilled or incinerated at the end of life. Disposal of thermosets is particularly problematic as cross-linking prevents the repurposing of disposed material. Thus, there is considerable interest in the development of PUs derived from inexpensive feedstocks that can be inherently chemically deconstructed. Ring opening metathesis polymerization (ROMP) of the naturally occurring sesquiterpene β-caryophyllene in the presence of dihydroxy chain terminators afforded the polyol hydroxy-terminated polycaryophyllene (HTPCR). Incorporation of HTPCR into PUs through reaction with polyisocyanates produced polymers with thermal and rheological properties comparable to commodity materials. The feasibility of chemical degradation of both thermoplastic and thermoset materials was also demonstrated through ruthenium-mediated metathesis, utilizing the metathesis-active olefins within the repeat caryophyllene monomer unit. Overall, this work highlights the value of biorenewable, chemically reprocessable polysesquiterpenes in the PU space.

materials↗
DOE OSTI2024

X-ray Induced Cycling of Rare-Earth Elements between Bulk and Interfacial Liquid

Reversible cycling of rare-earth elements between an aqueous electrolyte solution and its free surface is achieved by X-ray exposure. This exposure alters the competitive equilibrium between lanthanide ions bound to a chelating ligand, diethylenetriamine pentaacetic acid (DTPA), in the bulk solution and to insoluble monolayers of extractant di-hexadecyl phosphoric acid (DHDP) at its surface. Evidence for the exposure-induced temporal variations in the lanthanide surface density is provided by X-ray fluorescence near total reflection measurements. Comparison of results when X-rays are confined to the aqueous surface region to results when X-rays transmit into the bulk solution suggests the importance of aqueous radiolysis in the adsorption cycle. Amine binding sites in DTPA are identified as a likely target of radiolysis products. The molecules DTPA and DHDP are like those used in the separation of lanthanides from ores and in the reprocessing of nuclear fuel. Furthermore, these results suggest that an external source of X-rays can be used to drive rare-earth element separations. More generally, use of X-rays to controllably dose a liquid interface with lanthanides could trigger a range of interfacial processes, including enhanced metal ion extraction, catalysis, and materials synthesis.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Robust Self-Healing Adhesives Based on Dynamic Urethane Exchange Reactions

Thermoset polyurethanes (PUs) have been successfully reprocessed as covalent adaptable networks (CANs) by catalyzing carbamate exchange. Here we extend bond exchange beyond the internal network cross-links to create a dynamic urethane adhesive. Interfacing PU CANs to substrates with nucleophilic functional groups creates adhesives capable of reversible transcarbamoylation with the substrate, which has not been demonstrated previously by CAN adhesives. Two types of thermoset PU films were synthesized, one containing the green carbamate exchange catalyst Zr(tmhd)4 and the other containing no catalyst. Although otherwise identical in chemical and network properties, as indicated by FT-IR spectroscopy and dynamic mechanical thermal analysis (DMTA), the film containing catalyst showed dynamic bond exchange behavior through stress relaxation analysis. When evaluated as an adhesive, the CAN film exhibited self-healing properties and retained its adhesive strength for five cycles, which is attributed to reversible covalent bonding to the glass substrate. Furthermore, this work expands industrially relevant CANs to structural adhesives and demonstrates their potential value in an application that presently employs PUs as single-use materials.

adhesive↗