Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Principal Component Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Surface analysis insight note: Differentiation methods applicable to noisy data for determination of sp2‐ versus sp3‐hybridization of carbon allotropes and AES signal strengths

The derivatives of the spectra are commonly used for quantification in Auger Electron Spectroscopy (AES) spectra, while the derivative of the KLL C Auger line has proven to be valuable in obtaining a measure of the relative proportions of sp 2 ‐ and sp 3 ‐hybridization using the D‐parameter in both AES and X‐ray Photoelectron Spectroscopy (XPS). Differentiation of X‐ray Photoelectron Spectroscopy (XPS) and Auger Electron Spectroscopy (AES) spectra by numerical means is presented and illustrated for polymeric, such as PEEK and Nylon, as well as for graphitic materials including highly ordered pyrolytic graphite and graphene oxide. The most commonly available Savitzky–Golay method is explained mathematically and developed through the case of constructing a 5‐point quadratic polynomial convolution kernel suitable for differentiating spectra of adequate signal to noise. The concept of differentiation of spectra where signal to noise is less than adequate is also developed. Two alternative strategies to Savitzky–Golay differentiation are presented, which fit curves to data that allow derivatives to be obtained where Savitzky–Golay would otherwise fail. These alternative methods involve constructing a parametric curve that fits data over the entire energy interval of interest. Derivatives of spectra are then obtained by differentiating these parametric curves directly. A comparison of results for different materials for which specific sp 2 ‐ vs sp 3 ‐hybridized carbon proportions are of interest is used to emphasize the importance of characterizing methods used to differentiate spectra and understanding the characteristics of instrumentation used to measure spectra. The case for using Principal Component Analysis noise reduction with C KLL spectra is made for spectra collected from a heterogeneous graphene oxide sample.

Fairley, Neal↗
NASA NTRS2002

Analysis of Salinity Intrusion in the San Francisco Bay-Delta using a GA- Optimized Neural Net, and Application of the Model to Prediction in the Elkhorn Slough Habitat

The San Francisco Bay Delta is a large hydrodynamic complex that incorporates the Sacramento and San Joaquin Estuaries, the Burman Marsh, and the San Francisco Bay proper. Competition exists for the use of this extensive water system both from the fisheries industry, the agricultural industry, and from the marine and estuarine animal species within the Delta. As tidal fluctuations occur, more saline water pushes upstream allowing fish to migrate beyond the Burman Marsh for breeding and habitat occupation. However, the agriculture industry does not want extensive salinity intrusion to impact water quality for human and plant consumption. The balance is regulated by pumping stations located alone the estuaries and reservoirs whereby flushing of fresh water keeps the saline intrusion at bay. The pumping schedule is driven by data collected at various locations within the Bay Delta and by numerical models that predict the salinity intrusion as part of a larger model of the system. The Interagency Ecological Program (IEP) for the San Francisco Bay/Sacramento-San Joaquin Estuary collects, monitors, and archives the data, and the Department of Water Resources provides a numerical model simulation (DSM2) from which predictions are made that drive the pumping schedule. A problem with this procedure is that the numerical simulation takes roughly 16 hours to complete a C:~ prediction. We have created a neural net, optimized with a genetic algorithm, that takes as input the archived data from multiple stations and predicts stage, salinity, and flow at the Carquinez Straits (at the downstream end of the Burman Marsh). This model seems to be robust in its predictions and operates much faster than the current numerical DSM2 model. Because the system is strongly tidal driven, we used both Principal Component Analysis and Fast Fourier Transforms to discover dominant features within the IEP data. We then filtered out the dominant tidal forcing to discover non-primary tidal effects, and used this to enhance the neural network by mapping input-output relationships in a more efficient manner. Furthermore, the neural network implicitly incorporates both the hydrodynamic and water quality models into a single predictive system. Although our model has not yet been enhanced to demonstrate improve pumping schedules, it has the possibility to support better decision-making procedures that may then be implemented by State agencies if desired. Our intention is now to use this model in the smaller Elkhorn Slough complex near Monterey Bay where no such hydrodynamic model currently exists. At the Elkhorn Slough, we are fusing the neural net model of tidally-driven flow with in situ flow data and airborne and satellite remote sensation data. These further constrain the behavior of the model in predicting the longer-term health and future of this vital estuary.

Thompson, David E.↗
DOE OSTI2023

DEEPEN 3D PFA Weights for Exploration Datasets in Magmatic Environments

DEEPEN stands for DE-risking Exploration of geothermal Plays in magmatic ENvironments. As part of the development of the DEEPEN 3D play fairway analysis (PFA) methodology for magmatic plays (conventional hydrothermal, superhot EGS, and supercritical), weights needed to be developed for use in the weighted sum of the different favorability index models produced from geoscientific exploration datasets. This GDR submission includes those weights. The weighting was done using two different approaches: one based on expert opinions, and one based on statistical learning. The weights are intended to describe how useful a particular exploration method is for imaging each component of each play type. They may be adjusted based on the characteristics of the resource under investigation, knowledge of the quality of the dataset, or simply to reduce the impact a single dataset has on the resulting outputs. Within the DEEPEN PFA, separate sets of weights are produced for each component of each play type, since exploration methods hold different levels of importance for detecting each play component, within each play type. The weights for conventional hydrothermal systems were based on the average of the normalized weights used in the DOE-funded PFA projects that were focused on magmatic plays. This decision was made because conventional hydrothermal plays are already well-studied and understood, and therefore it is logical to use existing weights where possible. In contrast, a true PFA has never been applied to superhot EGS or supercritical plays, meaning that exploration methods have never been weighted in terms of their utility in imaging the components of these plays. To produce weights for superhot EGS and supercritical plays, two different approaches were used: one based on expert opinion and the analytical hierarchy process (AHP), and another using a statistical approach based on principal component analysis (PCA). The weights are intended to provide standardized sets of weights for each play type in all magmatic geothermal systems. Two different approaches were used to investigate whether a more data-centric approach might allow new insights into the datasets, and also to analyze how different weighting approaches impact the outcomes. The expert/AHP approach involved using an online tool (https://bpmsg.com/ahp/) with built-in forms to make pairwise comparisons which are used to rank exploration methods against one-another. The inputs are then combined in a quantitative way, ultimately producing a set of consensus-based weights. To minimize the burden on each individual participant, the forms were completed in group discussions. While the group setting means that there is potential for some opinions to outweigh others, it also provides a venue for conversation to take place, in theory leading the group to a more robust consensus then what can be achieved on an individual basis. This exercise was done with two separate groups: one consisting of U.S.-based experts, and one consisting of Iceland-based experts in magmatic geothermal systems. The two sets of weights were then averaged to produce what we will from here on refer to as the "expert opinion-based weights," or "expert weights" for short. While expert opinions allow us to include more nuanced information in the weights, expert opinions are subject to human bias. Data-centric or statistical approaches help to overcome these potential human biases by focusing on and drawing conclusions from the data alone. More information on this approach along with the dataset used to produce the statistical weights may be found in the linked dataset below.

15 GEOTHERMAL ENERGY↗
NASA NTRS2000

Sea Ice Motion from Wavelet Analysis of Satellite Data

Wavelet analysis of NASA scatterometer (NSCAT) backscatter and Defense Meteorological Satellite Program (DMSP) Special Sensor Microwave/Imager (SSM/I) radiance data can be used to obtain daily sea ice drift information for the Arctic region. This technique provides improved spatial coverage over the existing array of Arctic Ocean buoys and better temporal resolution over techniques utilizing data from satellite synthetic aperture radars. Comparisons with ice motion derived from ocean buoys give good quantitative agreement. Both comparison results from NSCAT and SSM/I are compatible, and the results from NSCAT can definitely complement that from SSM/I when there are cloud or surface effects. Then three sea-ice drift daily results from NSCAT, SSM/I, and buoy data can be merged as a composite map by some data fusion techniques. The ice flow streamlines are highly correlated with surface air pressure contours. Examples of derived ice-drift maps in December 1996 illustrate large-scale circulation reversals over a period of four days. A method for deriving divergence and shear at the large-scale has been developed and comparison between buoys and satellite results shows a good agreement. These calibrated/validated results indicate that NSCAT, SSM/I merged daily ice motion are suitably accurate to identify and closely locate sea ice processes, and to improve our current knowledge of sea ice drift and related processes through the data assimilation of ocean-ice numerical model. For demonstration purpose, the ice velocities derived from satellite data are compared with the ice velocities derived from a coupled ice-ocean interaction model. The comparison reveals that the general circulation patterns of the two are quite similar but the ice velocity differences between the two are quite significant. In order to quantify the wind effects on ice motion, empirical orthogonal functions (EOF) are used in the principal component analysis for both ice motion and pressure field. Some preliminary results of sea-ice motion from QuikScat will also be presented.

Liu, Antony K.↗
DOE OSTI2015

Group‐sparsity regularization for ill‐posed subsurface flow inverse problems

Abstract Sparse representations provide a flexible and parsimonious description of high‐dimensional model parameters for reconstructing subsurface flow property distributions from limited data. To further constrain ill‐posed inverse problems, group‐sparsity regularization can take advantage of possible relations among the entries of unknown sparse parameters when: (i) groups of sparse elements are either collectively active or inactive and (ii) only a small subset of the groups is needed to approximate the parameters of interest. Since subsurface properties exhibit strong spatial connectivity patterns they may lead to sparse descriptions that satisfy the above conditions. When these conditions are established, a group‐sparsity regularization can be invoked to facilitate the solution of the resulting inverse problem by promoting sparsity across the groups. The proposed regularization penalizes the number of groups that are active without promoting sparsity within each group. Two implementations are presented in this paper: one based on the multiresolution tree structure of Wavelet decomposition, without a need for explicit prior models, and another learned from explicit prior model realizations using sparse principal component analysis (SPCA). In each case, the approach first classifies the parameters of the inverse problem into groups with specific connectivity features, and then takes advantage of the grouped structure to recover the relevant patterns in the solution from the flow data. Several numerical experiments are presented to demonstrate the advantages of additional constraining power of group‐sparsity in solving ill‐posed subsurface model calibration problems.

Golmohammadi, Azarang↗
DOE OSTI2018

Discrete Regularization for Calibration of Geologic Facies Against Dynamic Flow Data

Abstract Subsurface flow model calibration involves many more unknowns than measurements, leading to ill‐posed problems with nonunique solutions. To alleviate nonuniqueness, the problem is regularized by constraining the solution space using prior knowledge. In certain sedimentary environments, such as fluvial systems, the contrast in hydraulic properties of different facies types tends to dominate the flow and transport behavior, making the effect of within facies heterogeneity less significant. Hence, flow model calibration in those formations reduces to delineating the spatial structure and connectivity of different lithofacies types and their boundaries. A major difficulty in calibrating such models is honoring the discrete, or piecewise constant, nature of facies distribution. The problem becomes more challenging when complex spatial connectivity patterns with higher‐order statistics are involved. This paper introduces a novel formulation for calibration of complex geologic facies by imposing appropriate constraints to recover plausible solutions that honor the spatial connectivity and discreteness of facies models. To incorporate prior connectivity patterns, plausible geologic features are learned from available training models. This is achieved by learning spatial patterns from training data, e.g., ‐SVD sparse learning or the traditional Principal Component Analysis. Discrete regularization is introduced as a penalty functions to impose solution discreteness while minimizing the mismatch between observed and predicted data. An efficient gradient‐based alternating directions algorithm is combined with variable splitting to minimize the resulting regularized nonlinear least squares objective function. Numerical results show that imposing learned facies connectivity and discreteness as regularization functions leads to geologically consistent solutions that improve facies calibration quality.

Khaninezhad, Mohammad‐Reza↗
DOE OSTI2020

Single Bimodular Sensor for Differentiated Detection of Multiple Oxidative Gases

Semiconductive metal-oxide sensors suffer from cross-sensitivities under mixed chemical condition, specifically upon mixture of multiple oxidative or reductive gases. Herein, a single bimodular sensor is demonstrated for smart differentiation of multiple oxidative analytes by relating the resistance-metric mode to impedance-metric mode. The sensor construct based on ZnO nanorods readily outputs three response datasets upon exposure of oxidative-gas mixture including O 2 , SO 2 , and NO 2 , the resistance, real part impedance, and imaginary part impedance. The differentiative and correlated nature between these response signals allows such a single sensor platform to differentiate these oxidative gases accurately and robustly. Linear and non-linear decision boundaries are established over a large gas-concentration range from 2 ppm to 3% through a combination of principal component analysis and artificial neural network training. A facile user interface is demonstrated for recognition and measurement of unknown gas analytes, with the error of the predicted analyte-concentration as low as 2%.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Multivariate Machine Learning Models of Nanoscale Porosity from Ultrafast NMR Relaxometry

Abstract Nanoporous materials are of great interest in many applications, such as catalysis, separation, and energy storage. The performance of these materials is closely related to their pore sizes, which are inefficient to determine through the conventional measurement of gas adsorption isotherms. Nuclear magnetic resonance (NMR) relaxometry has emerged as a technique highly sensitive to porosity in such materials. Nonetheless, streamlined methods to estimate pore size from NMR relaxometry remain elusive. Previous attempts have been hindered by inverting a time domain signal to relaxation rate distribution, and dealing with resulting parameters that vary in number, location, and magnitude. Here we invoke well‐established machine learning techniques to directly correlate time domain signals to BET surface areas for a set of metal‐organic frameworks (MOFs) imbibed with solvent at varied concentrations. We employ this series of MOFs to establish a correlation between NMR signal and surface area via partial least squares (PLS), following screening with principal component analysis, and apply the PLS model to predict surface area of various nanoporous materials. This approach offers a high‐throughput, non‐destructive way to assess porosity in c.a. one minute. We anticipate this work will contribute to the development of new materials with optimized pore sizes for various applications.

Fricke, Sophia N.↗
DOE OSTI2024

Multivariate Machine Learning Models of Nanoscale Porosity from Ultrafast NMR Relaxometry

Abstract Nanoporous materials are of great interest in many applications, such as catalysis, separation, and energy storage. The performance of these materials is closely related to their pore sizes, which are inefficient to determine through the conventional measurement of gas adsorption isotherms. Nuclear magnetic resonance (NMR) relaxometry has emerged as a technique highly sensitive to porosity in such materials. Nonetheless, streamlined methods to estimate pore size from NMR relaxometry remain elusive. Previous attempts have been hindered by inverting a time domain signal to relaxation rate distribution, and dealing with resulting parameters that vary in number, location, and magnitude. Here we invoke well‐established machine learning techniques to directly correlate time domain signals to BET surface areas for a set of metal‐organic frameworks (MOFs) imbibed with solvent at varied concentrations. We employ this series of MOFs to establish a correlation between NMR signal and surface area via partial least squares (PLS), following screening with principal component analysis, and apply the PLS model to predict surface area of various nanoporous materials. This approach offers a high‐throughput, non‐destructive way to assess porosity in c.a. one minute. We anticipate this work will contribute to the development of new materials with optimized pore sizes for various applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Decomposition of Irganox 1010 in plastic bonded explosives

Abstract Degradation pathways of Irganox 1010 in aged plastic bonded explosive (PBX) 9501 were investigated using ultrahigh performance liquid chromatography coupled to quadrupole time of flight mass spectrometry (UHPLC‐QTOF). Using a targeted approach, a total of 44 Irganox 1010 decomposition products were discovered. These decomposition products were formed through hydrolysis, scission, and/or oxidation of Irganox 1010. The hydrolytic decomposition of Irganox is a straightforward process resulting in the cleavage of the ester group(s) while oxidation and scission are more complicated and can happen at multiple locations on the Irganox 1010 molecule. Moreover, due to the symmetric nature of Irganox 1010, multiple decomposition reactions can occur. Indeed some decomposition products exhibited hydrolysis, oxidation, and scission. In order to probe any trends in the aged PBX 9501 samples, principal component analysis (PCA) was implemented. The greatest chemical differences between the aged PBX samples was hydrolysis of the ester functional groups on Irganox 1010. Despite the negative connotations of hydrolysis, the Irganox 1010 decomposition products are still able to function as a radical scavenger in PBX 9501 as intended.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

The Electrochemical Sodiation of FeSb 2 : New Insights from Operando 57 Fe Synchrotron Mössbauer and X-Ray Absorption Spectroscopy

Operando Sb K–edge X–ray absorption spectroscopy and 57 Fe Synchrotron Mössbauer Spectroscopy, used for the first time in the field of operando energy storage materials, assisted by operando magnetic measurements, were combined to clarify the role of iron and antimony in the electrochemical reaction mechanism of FeSb 2 as negative electrode material for sodium–ion batteries (SIB). Both datasets were analyzed using an innovative chemometric approach involving principal component analysis (PCA) and multivariate curve resolution – alternating least square analysis (MCR–ALS) yielding new insights on the sodiation reaction. Our findings show that the reaction of Na with FeSb 2 during discharge leads to the formation of Na 3 Sb along with superparamagnetic Fe amorphous nanoparticles which contain small amounts of Sb dissolved in their lattice. During the following desodiation, the pristine material FeSb 2 is not recovered while iron nanoparticles grow in size, and continue growing also along the following discharge. Here, even though such iron nanoparticles remain electrochemically inactive, they play a key role in the reduction and stabilization of the polarization as well as in the reversibility of the electrochemical sodiation of antimony.

25 ENERGY STORAGE↗
DOE OSTI2019

Real‐time quantification and supplementation of bioreactor amino acids to prolong culture time and maintain antibody product quality

Abstract Real‐time monitoring of cell cultures in bioreactors can enable expedited responses necessary to correct potential batch failure perturbations which may normally go undiscovered until the completion of the batch and result in failure. Currently, analytical technologies are dedicated to real‐time monitoring of bioreactor parameters such as pH, dissolved oxygen, and temperature, nutrients such as glucose and glutamine, or metabolites such as lactate. Despite the importance of amino acids as the building blocks of therapeutic protein products, other than glutamine their concentrations are not commonly measured. Here, we present a study into amino acid monitoring, supplementation strategies, and how these techniques may impact the cell growth profiles and product quality. We used preliminary bioreactor runs to establish baselines by determining initial amino acid consumption patterns, the results of which were used to select a pool of amino acids which gets depleted in the bioreactor. These amino acids were combined into blends which were supplemented into bioreactors during a subsequent run, the concentrations of which were monitored using a mass spectrometry based at‐line method we developed to quickly assess amino acid concentrations from crude bioreactor media. We found that these blends could prolong culture life, reversing a viable cell density decrease that was leading to batch death. Additionally, we assessed how these strategies might impact protein product quality, such as the glycan profile. The amino acid consumption data were aligned with the final glycan profiles in principal component analysis to identify which amino acids are most closely associated with glycan outcomes.

Powers, David N.↗
DOE OSTI2019

New hints on Maya Blue formation process by PCA-assisted in situ XRPD/PDF and optical spectroscopy

The exact recipe to prepare the ancient Maya Blue (MB), an incredibly resistant and brilliant pigment prepared from indigo (dye) and Paligorskite (clay), is lost to the ages. To unravel the key features of the MB formation process, several inorganic-dye couples were heated to 200°C and cooled to RT, to investigate their reactivity and the diffusion and degree of sequestration of the dye into the inorganic host. In situ XRPD/PDF and fiber optic reflectance spectroscopy (FORS) data, sided by TGA, provided a comprehensive overview on MB formation mechanism. XRPD/PDF gave information on long/short range behaviors of water desorption/adsorption and indigo sequestration, while TGA and in situ FORS gave information on mass and optical changes within temperature. Ex situ dye removal was used to understand the sample stability after the thermal treatments. A statistical approach based on Principal Component Analysis was exploited to efficiently and jointly analyze the ~3000 collected patterns. MB formation starts below 110°C with disordered distribution of indigo within the channels, reaching maximum reaction speed and higher ordering at 150°C. Above 175°C, color changes and a stronger sequestration of indigo into framework channels are observed, while the affinity for water is dramatically reduced. The origin of different colors, hues and stability in historical MB samples can then explained in term of different thermal history of the starting mechanical indigo-palygorskite mixture.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Eigensolver performance comparison on Cray XC systems

Summary Hermitian (symmetric) eigenvalue solvers are the core constituents of electronic structure, quantum‐chemistry, and other HPC applications such as Quantum ESPRESSO, VASP, CP2K, and NWChem to name a few. Our understanding of the performance of symmetric eigenvalue algorithms on various hardware is clearly important to the quantum chemistry or condensed matter physics community but in fact goes beyond that community. For instance, big data analytics is increasingly utilizing eigenvalues solvers, in the study of randomized singular value decomposition (SVD) or principal component analysis (PCA). Noise, vibration, and harshness (NVH) is another field where fast and efficient eigenvalue solvers are required. Most eigenvalue solver packages feature numerous different parameters which can be tuned for performance, eg, the number of nodes, number of total ranks, the decomposition of the matrix, etc. In this paper, we investigate the performance of different packages as well as the influence of these knobs on the solver performance.

Cook, Brandon↗
DOE OSTI2019

Geographic patterns in morphometric and genetic variation for coyote populations with emphasis on southeastern coyotes

Prior to 1900, coyotes (Canis latrans) were restricted to the western and central regions of North America, but by the early 2000s, coyotes became ubiquitous throughout the eastern United States. Information regarding morphological and genetic structure of coyote populations in the southeastern United States is limited, and where data exist, they are rarely compared to those from other regions of North America. We assessed geographic patterns in morphology and genetics of coyotes with special consideration of coyotes in the southeastern United States. Mean body mass of coyote populations increased along a west-to-east gradient, with southeastern coyotes being intermediate to western and northeastern coyotes. Similarly, principal component analysis of body mass and linear body measurements suggested that southeastern coyotes were intermediate to western and northeastern coyotes in body size but exhibited shorter tails and ears from other populations. Genetic analyses indicated that southeastern coyotes represented a distinct genetic cluster that differentiated strongly from western and northeastern coyotes. We postulate that southeastern coyotes experienced lower immigration from western populations than did northeastern coyotes, and over time, genetically diverged from both western and northeastern populations. Coyotes colonizing eastern North America experienced different selective pressures than did stable populations in the core range, and we offer that the larger body size of eastern coyotes reflects an adaptation that improved dispersal capabilities of individuals in the expanding range.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2016

Ecosystem warming increases sap flow rates of northern red oak trees

Abstract Over the next century, air temperature increases up to 5°C are projected for the northeastern United States. As evapotranspiration strongly influences water loss from terrestrial ecosystems, the ecophysiological response of trees to warming will have important consequences for forest water budgets. We measured growing season sap flow rates in mature northern red oak ( Quercus rubra L.) trees in a combined air (up to 5.5°C above ambient) and soil (up to 1.85°C above ambient at 6‐cm depth) warming experiment at Harvard Forest, Massachusetts, United States. Through principal components analysis, we found air and soil temperatures explained the largest amount of variance in environmental variables associated with rates of sap flow, with relative humidity, photosynthetically active radiation and vapor pressure deficit having significant, but smaller, effects. On average, each 1°C increase in temperature increased sap flow rates by approximately 1100 kg H 2 O m −2 sapwood area day −1 throughout the growing season and by 1200 kg H 2 O m −2 sapwood area day −1 during the early growing season. Reductions in the number of cold winter days correlated positively with increased sap flow during the early growing season (a decrease in 100 heating‐degree days was associated with a sapflow increase in approximately 5 kg H 2 O m −2 sapwood area day −1 ). Soil moisture declined with increased treatment temperatures, and each soil moisture percentage decrease resulted in a decrease in sap flow of approximately 360 kg H 2 O m −2 sapwood area day −1 . At night, soil moisture correlated positively with sap flow. These results demonstrate that warmer air and soil temperatures in winter and throughout the growing season lead to increased sap flow rates, which could affect forest water budgets throughout the year.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2017

Drivers of nitrogen transfer in stream food webs across continents

Studies of trophic-level material and energy transfers are central to ecology. The use of isotopic tracers has now made it possible to measure trophic transfer efficiencies of important nutrients and to better understand how these materials move through food webs. We analyzed data from thirteen 15 N-ammonium tracer addition experiments to quantify N transfer from basal resources to animals in headwater streams with varying physical, chemical, and biological features. N transfer efficiencies from primary uptake compartments (PUCs; heterotrophic microorganisms and primary producers) to primary consumers was lower (mean: 11.5%, range: <1%-43%) than N transfer efficiencies from primary consumers to predators (mean: 80%, range: 5%- >100%). Total N transferred (as a rate) was greater in streams with open compared to closed canopies and overall N transfer efficiency generally followed a similar pattern, although was not statistically significant. We used principal component analysis to condense a suite of site characteristics into two environmental components. Total N uptake rates among trophic levels were best predicted by the component that was correlated with latitude, DIN:SRP, GPP:ER, and % canopy cover. N transfer efficiency did not respond consistently to environmental variables. Here, our results suggest that canopy cover influences N movement through stream food webs because light availability and primary production facilitate N transfer to higher trophic levels.

15N↗
DOE OSTI2022

A novel methodology to integrate outcomes regarding perioperative pain experience into a composite score: Prediction model development and validation

Abstract Background An integrated score that globally assesses perioperative pain experience and rationally weights each component has not yet been developed. Methods A development dataset specific to adult Chinese patients undergoing orthopaedic surgery was obtained from PAIN OUT (1985 qualified patients of 2244). A more recent validation dataset obeying the same conditions was obtained from the Chinese Anaesthesia Shared‐database Platform (1004 qualified patients of 1032). Outcomes were assessed using the International Pain Outcomes Questionnaire (IPO‐Q), which comprises key patient‐level outcomes of perioperative pain management, including pain experience and perceptions of care. Using principal component analysis and regression models, a composite score (CS) was inferred to integrate pain experience. The discrimination of the CS for dissatisfaction and desire for more pain treatment was compared with that of the worst pain score. Results A CS was developed from the 12 items of the IPO‐Q regarding pain experience. The weight for calculating the CS was worst pain 11, least pain 17, time spent in severe pain 11, interference with activity in bed 9, interference with breathing deeply or coughing 10, interference with sleep 9, anxiety 12, helplessness 12, nausea 0, drowsiness 2, itch 5 and dizziness 2. In external validation, the CS indicated superior discrimination to the worst pain in predicting dissatisfaction ( p < 0.001) and desire for more pain treatment ( p < 0.001). Conclusions This study introduced a methodology to integrate outcomes regarding perioperative pain experience into a CS, which was based on the weight of each item. Significance This novel methodology sheds additional light on the riveting issue of carefully integrating several measures into a composite endpoint, which may be useful for quality improvement purposes when addressing the impact of a change in clinical practice.

Jiang, Bailin↗