Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Pretreatment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

The interplay between surface facet and reconstruction on isopropanol conversion over SrTiO 3 nanocrystals

Strontium titanate (SrTiO 3 ) is an extensively investigated perovskite for various applications due to its optical, electrical and chemical properties. To gain an in-depth understanding of the active sites involved in heterogeneous catalysis over the broadly used SrTiO 3 (STO), we studied a model reaction, isopropanol conversion, on three differently shape-controlled nanocrystals: cube, truncated cube and dodecahedra. SEM, XRD and XPS confirmed the morphology, phase and composition of STO shapes. Low energy ion scattering (LEIS) revealed the occurrence of surface reconstruction over STO shapes during O 2 pretreatment at different temperatures. Based on the catalytic activities, scanning transmission electron microscopy images and density functional theory calculations, the step sites on STO derived from surface reconstruction were proposed to be the active sites for isopropanol conversion. This was further confirmed by steady state isotopic kinetic analysis (SSITKA) which demonstrated similar intrinsic turnover frequencies (TOFs) for the differently reconstructed STO shapes. It is concluded that the crystal facets impose an indirect effect on the catalysis of STO via controlling the degrees of surface reconstruction: the less stable STO (1 1 0) facet (dodecahedra) leads to more step sites after reconstruction and hence higher overall reaction rate than the more stable (1 0 0) facet (cube). This work highlights the important interplay between the crystal facet and surface reconstruction in controlling the nature and density of active sties and thus catalysis over complex oxides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Supported molybdenum oxides for the aldol condensation reaction of acetaldehyde

The (retro-)aldol condensation reaction is an important chemical transformation in the upgrading of biomass-derived compounds into fuels and valuable specialty chemicals. In this study, we found that supported molybdenum oxide (MoO x ) catalysts were active and selective for the aldol condensation of acetaldehyde to crotonaldehyde under steady-state reactor conditions. Through a combination of transmission electron microscopy (TEM), ultraviolet–visible (UV–VIS) diffuse reflectance spectroscopy, Fourier transform infrared (FTIR) spectroscopy of adsorbed pyridine, and steady-state reactor testing, we determined that highly dispersed MoO x has a strong interaction with a γ-Al 2 O 3 support resulting in optimal catalyst performance at low weight loadings. In contrast, MoO x particles supported on SiO 2 have a weaker interaction with the support, resulting in a monotonic relationship between Mo loading and aldol condensation activity. The Lewis acid site density and strength are important parameters for predicting aldol condensation activity across all samples. The concentration of weak acid sites had a poor correlation with aldol condensation activity, most likely because these sites are too weak to activate acetaldehyde for the reaction. Medium and strong acid sites both had good correlations to aldol condensation activity. Results from X-ray absorption near edge structure (XANES) and acetaldehyde temperature programmed desorption (TPD) indicated that partially reduced MoO x was more active for aldol condensation, but pretreatment in reducing or oxidizing environments had no significant effect on steady-state catalytic activity. Finally, characterization of spent catalyst samples through temperature programmed oxidation (TPO) and thermogravimetric analysis (TGA) revealed that catalysts with high densities of strong acid sites tended to form more carbonaceous deposits on the surface over the course of the reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Surface Fe clusters promote syngas reaction to oxygenates on Rh catalysts modified by atomic layer deposition

Converting syngas to higher oxygenates is a promising strategy for sustainably producing fuels and chemicals used every day. Rh-based catalysts promoted with metal oxides have long been of interest for oxygenate synthesis, but the role of promoters and the structure of the catalyst during reaction are often not well understood. In this work, we characterize a Rh/SiO 2 catalyst modified by Fe 2 O 3 deposited by atomic layer deposition (ALD). Here, we show that Fe 2 O 3 deposits selectively on the Rh nanoparticles and enhances both the turnover frequency and the oxygenate selectivity of the catalysts. A maximum 29% selectivity towards higher oxygenates is achieved with just 1 cycle of Fe 2 O 3 ALD, and we relate the trends in selectivity to the changing availability of surface sites that drive higher alcohol (e.g., ethanol and propanol) formation. Further, we show that the ALD promoter mitigates catalyst sintering, improving the stability of these materials. In-situ X-ray absorption spectroscopy experiments reveal that the Fe 2 O 3 undergoes reduction during the catalyst pretreatment and forms Fe clusters on the surface of the Rh that migrate but remain stable under syngas reaction conditions. We find that modification of the Rh with these surface Fe species is key to the enhanced alcohol production observed in these materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Mechanistic study of heterogeneous propene metathesis on WO x /SiO 2 catalysts

Silica-supported tungsten oxides are widely used industrial catalysts for olefin metathesis due to their low cost and robustness, yet the mechanisms for heterogeneously catalyzed metathesis reactions remain comparatively less understood. In this work, density-functional theory (DFT) calculations were used to study the model reactions of propene metathesis. Our calculations confirm that the metathesis reactions catalyzed by WO x /SiO 2 largely follow the Chauvin cycle, with an overall energetic barrier of 142 kJ/mol. To understand how the initial alkylidene active sites are generated, three mechanisms were examined: The pseudo-Wittig mechanism was found to be most favorable and proceeds with a metallacycle intermediate, while the allylic and vinylic C-H activations are much more difficult and require the reduction of surface sites to W(+4). Relative to the adsorbed reactant state, the overall intrinsic barriers for three mechanisms were computed to be 193, 261, and 355 kJ/mol, respectively. In conclusion, the higher barriers for active-site formation than for the metathesis cycle are consistent with the difficult, high-temperature pretreatment required in experiments to activate WO x /SiO 2 catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Biorefinery upgrading of herbaceous biomass to renewable hydrocarbon fuels, Part 1: Process modeling and mass balance analysis

Process simulation has long been a well-established tool to track key operational, design, and mass and energy balance metrics for pre-commercial technologies such as advanced lignocellulosic biofuels. While tools such as this are well-documented in the public literature around 2nd-generation cellulosic ethanol technologies (which have been scaled up to commercial deployment to some degree over the past decade), such models and analysis information remain more sparse for more complex biorefinery pathways focused on producing drop-in hydrocarbon fuels and blend-stocks, particularly regarding information required to support air emissions or other environmental analysis. In this work, we summarize key details for an established "design case" modeling the conversion of herbaceous lignocellulosic biomass into a renewable diesel hydrocarbon blend-stock based on a representative lipid pathway from oleaginous yeast. The process is based on a biochemical deconstruction and upgrading approach utilizing deacetylation and dilute acid pretreatment, followed by enzymatic hydrolysis, fermentation, and catalytic upgrading of hydrolysate sugars to fuels. We provide key mass and energy balance outputs from the process models, with accompanying stream tables and component-level flowrates. A total of 12 model scenarios are presented spanning two feedstocks, three biorefinery scales, and two processing approaches for the lignin/residual solids waste streams. This "Part 1" manuscript presents the resulting impacts across the 12 cases on fuel yields and key output streams, focused here on direct biorefinery air emissions for selected components including CO 2 as well as sulfur (SOx) and nitrogen oxides (NOx). In the context of cleaner production, the latter focus on selected biorefinery air emission outputs establishes an initial baseline estimate and accompanying framework of the model cases, upon which an accompanying "Part 2" study will build to refine the values for these and other air pollutants across these scenarios, also considering mitigation options to comply with applicable regulatory standards. We also highlight further optimization opportunities based on potential tradeoffs identified here between air emissions versus life-cycle greenhouse gas profiles attributed to the disposition of lignin/residual solids.

09 BIOMASS FUELS↗
DOE OSTI2023

An integrated biorefinery approach to obtain xylo-oligosaccharides from corncob using lactic acid-rich fermentation broth

Although xylo-oligosaccharides production from lignocelluloses via lactic acid hydrolysis is advantageous in terms of high yields with less by-products, the use of high purity lactic acid inevitably increases the cost of xylo-oligosaccharides production. The utilization of lactic acid-rich fermentation broth for xylo-oligosaccharides production can avoid the separation and purification of lactic acid. However, the feasibility of lactic acid-rich fermentation broth for xylo-oligosaccharides production from lignocelluloses was unclear. In this work, the results indicated that the highest xylo-oligosaccharides yield of 72% was obtained from corncob by lactic acid-rich fermentation broth pretreatment and xylanase hydrolysis. Subsequently, monosaccharides-rich hydrolysate (90.9 g/L) was obtained from solid residues of corncob by cellulase hydrolysis. Lactic acid-rich fermentation broth was produced by Weizmannia coagulans fermentation of the monosaccharide-rich hydrolysate. Besides, the obtained xylo-oligosaccharides and lactic acid mixture might be used as feed additives, avoiding the purification and separation of lactic acid or xylo-oligosaccharides. Meanwhile, the production cost of feed grade xylo-oligosaccharides from this work was much lower than the current market price. Overall, this work proposed a new strategy for efficient and environmental-friendly production of xylo-oligosaccharides from corncob.

09 BIOMASS FUELS↗
DOE OSTI2022

Impact of biomass ash content on biocomposite properties

Owing to its low cost and sustainable nature, lignocellulosic biomass has been utilized for reinforcing polymers, but it is crucial to understand the impact of high-ash concentrations in biomass on composite strength and processing. Biomass is not only desirable for biofuel production but could also have a strong market, if high-ash biomass is acceptable, for biocomposites. In this work, natural fibers (switchgrass and corn stover) were used to reinforce polylactic acid (PLA) to produce biocomposites. Natural fibers were pretreated to obtain fibers that contain different percentages of ash. The mechanical properties (such as Young's modulus, tensile strength, failure strain, storage modulus) of corn stover/PLA composites remained largely unaffected by the ash concentration of the biomass fibers, despite the large range of ash contents (2.2–11.9 wt%). Furthermore, the tensile strengths of switchgrass/PLA composites were slightly negatively affected by the ash concentration of the switchgrass fibers (0.7–2.1 wt%). Both the switchgrass/PLA and the corn stover/PLA composites exhibited a high-enough tensile strength (49–57 MPa) and suitable complex viscosity (2.0–7.0 kPa·s at the frequency of 3.2 rad/s). They are expected to be 3D-printable through an extrusion-based additive manufacturing process.

36 MATERIALS SCIENCE↗
DOE OSTI2022

MOCVD Surface Preparation of V-Groove Si for III-V Growth

V-groove nanopatterning of Si substrates has recently demonstrated promise for achieving high-quality III-V-on-Si epitaxy while providing a lower-cost processing route than chemo-mechanical polishing to produce epi-ready planar wafers. A key factor in determining the crystalline quality of III-V buffer layers is the Si surface structure and its chemical composition. Unlike planar Si surfaces, the surfaces of V-grooves prior to growth have not been studied in detail. Here, we study the surface of V-groove Si prepared for GaP nucleation via X-ray photoelectron spectroscopy and low-energy electron diffraction. We identify several pretreatments, using both 830 and 1000 annealing under an As background pressure, as being suitable for deoxidizing and cleaning the V-groove Si surface. The V-groove Si was found to behave similarly to reference Si(0 0 1) and Si(1 1 1) planar samples, demonstrating that in situ techniques such as reflection anisotropy spectroscopy can be used on reference samples to infer the state of the V-groove surface, and indicating that the extensive research on planar Si surfaces can be directly applied to V-grooves.

III-V epitaxy↗
DOE OSTI2021

Holistic design principles for flow batteries: Cation dependent membrane resistance and active species solubility

Cation dependent resistance of a commercial cation exchange membrane, Nafion™ 212, as well as the solubility of select active materials are investigated, demonstrating practical consequences of cation choice on redox flow battery (RFB) performance. The conductivity of alkali and methyl- or -alcohol substituted ammonium cations through pretreated Nafion™ 212 reveal that cation size is the dominant factor affecting ionic transport. Among the alkali series the resistance increases with larger ionic radii and similarly, with increasing steric bulk through substitution on ammonia. The solubility of ferrocyanide, a commonly used redox flow battery posolyte (or catholyte), as well as iron, cobalt, and chromium metal-organic compounds are determined for the same series of cations. Full cells are assembled using various cation mixtures and membrane pre-treatments to demonstrate practical effects of each variable. Here, we highlight the need to carefully select the correct cations for efficient electrolyte design, since certain cations may lead to high conductivity but low solubility, or vice versa, and provide design principles for RFBs using Nafion™ 212.

25 ENERGY STORAGE↗
DOE OSTI2023

Analysis of backwash settings to maximize net water production in an engineering-scale ultrafiltration system for water reuse

Ultrafiltration (UF) has been widely utilized as water pretreatment for different applications especially in water reuse. The UF system operation is characterized by a filtration phase, where particles accumulate on the membrane surface resulting in an increase in the transmembrane pressure (TMP) and a cleaning phase, where foulants are removed through cleaning cycles including physical backwash and chemical-enhanced backwash (CEB). In this study, data from an engineering-scale UF system treating reclaimed wastewater were used to assess the impact of backwashing on the filtration process. TMP backwash trigger, backwash duration, and CEB frequency were purposely varied for a cycle-by-cycle investigation on the net water production, water recovery, initial operating TMP, and filtration cycle duration. As the TMP backwash trigger was varied between 62 and 145kPa, the maximum net water production (63 m 3 /d) was achieved at 103kPa and water recovery remained relatively constant at approximately 92%. Backwash durations of 45, 65, and 85s were performed where both net water production and water recovery yielded similar results (~63 m 3 /d and ~ 91%) compared with 103kPa TMP backwash trigger. The CEB frequency was also lowered from one every three backwashes (1/3) to 1/6 and 1/12 and resulted in decreased net water production and water recovery while the initial TMP increased. Interestingly, the total number of CEBs remained approximately constant regardless of their frequency. In conclusion, results suggest that CEB is an important fouling control process to maximize water production.

42 ENGINEERING↗
DOE OSTI2021

Frank-van der Merwe growth in bilayer graphene

Bilayer graphene has attracted significant interest because of its unique properties, including fascinating electrical behavior when one layer is slightly rotated relative to the other. However, the quality of large-area bilayer graphene is often limited by the layer-plus-island growth mode in which islands of thicker graphene present as unavoidable impurities. Here, we report the observation of the layer-by-layer, Frank-van der Merwe (FM) growth mode in bilayer graphene where multilayer impurities are suppressed. Instead of the conventional surface adhesive energy, we found it possible to tune interface adhesive energy with an oxidative pretreatment. Finally, the FM-grown bilayer graphene is of AB stacking or with small twisting angle (θ = 0°–5°), which is more mechanically robust compared with monolayer graphene, facilitating a free-standing wet transfer technology.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Biofouling of filtration membranes in wastewater reuse: In situ visualization with confocal laser scanning microscopy

The filtration membranes utilized in advanced treatment of municipal wastewater are prone to biological fouling. Permeability loss and water recovery limitations due to fouling necessitate additional pretreatment and membrane cleaning, which raise the cost of water reuse. Better fouling mitigation calls for a deeper understanding of biofilm behavior on water reuse membranes. This study uses confocal microscopy to monitor biofouling under realistic conditions. To simulate water reuse, a miniature flow cell with microfiltration and ultrafiltration membranes was operated under typical filtration conditions using secondary effluent from California's East Bay Municipal Utility District. The growing biofilms were stained for extracellular polymeric substances and live and dead cells, and they were monitored in situ under filtration conditions with a confocal laser scanning microscope to produce 2-D and 3-D images. In situ image series revealed biofilm growth and removal processes including internal and external fouling, extracellular polymeric substance production, wrinkling, delamination, and film re-deposition. Additionally, changes in biofilm morphology between in situ and ex situ images highlighted limitations of ex situ imaging. Here, these results provide insight into the physical and biological mechanisms of biofouling in hopes of informing the development of improved techniques for biofouling mitigation.

ultrafiltration↗
DOE OSTI2023

Linking water quality, fouling layer composition, and performance of reverse osmosis membranes

Fouling of polyamide membranes during reverse osmosis (RO) is a major challenge for adopting membrane technologies to treat highly contaminated waters, especially those containing organic foulants (e.g., natural organic matter (NOM), polysaccharides) and dominant cations (e.g., sodium, magnesium, calcium). Here, this work combines bench-scale membrane fouling experiments with detailed characterization of feedwater chemistry and fouling layer composition/morphology to reveal fundamental mechanisms of (in)organic fouling during RO. Divalent cations are shown to promote fouling by hydrophobic NOM containing aromatic and carboxyl groups, while NOM fouling in the presence of a monovalent cation, sodium, occurs by smaller fulvic acids containing larger fractions of carboxyl groups and other oxygen-rich moieties. Calcium-carboxyl bridging occurs in solution and near the membrane surface to induce NOM aggregation on nanometer length scales. In complex waters containing foulant mixtures, co-fouling by calcium-carboxyl bridging and CaCO 3 precipitation influence membrane performance at longer timeframes. However, the flux decline observed for the co-fouling mechanism was less significant than the sum of its parts, suggesting both synergistic and antagonistic fouling mechanisms should be considered in membrane design/operation. These results encourage the design of pretreatment processes to reduce concentrations of multivalent ions and hydrophobic NOM in RO feedwaters, and of membrane materials to limit attachment/deposition of aggregates to/on polyamide surfaces.

42 ENGINEERING↗
DOE OSTI2023

Investigation of potential polyatomic interferences on uranium isotope ratio measurements for the LS-APGD-Orbitrap MS system

The determination of actinide (e.g., U and Pu) content and isotopics is of importance to the nuclear forensics and safeguards communities. However, in the analysis of environmental samples, such as those collected by the International Atomic Energy Agency, uranium measurements can be complicated by isobaric interferences from polyatomic variants of heavy elements (e.g., Pb). This leads to complex, time-consuming sample manipulations (i.e., separations) before determining isotope ratios. An alternative strategy to sample pretreatment is to use high-resolution mass spectrometric platforms during the analysis to fully resolve the uranium isotopes from potential polyatomic interferences, negating the need for prior chemical separation. The liquid sampling - atmospheric pressure glow discharge (LS-APGD) coupled with an Orbitrap mass spectrometer provides a high-resolution (>70,000 m/Δm at m/z 200) inorganic mass spectrometry platform. Further, as a demonstration of the power of this instrumental platform, and indeed, the high-resolution approach in general, uranium isotope ratios were determined in the presence of elemental impurities (e.g., Pb, Pt, Ta, W) commonly encountered with environmental sample swipe analysis, without any prior treatment. Even at elemental impurity concentrations of 1000–5000× relative to uranium, no interference was observed with the 235 U or 238 U signal. In addition, the 235 U/ 238 U isotope ratio for the samples with the concomitants present are within 2 standard deviations of the values obtained without their addition, indicating that these impurities do not impact the determined uranium isotope ratio. These findings represent a significant first step in leveraging the high resolution of the LS-APGD-Orbitrap-MS to overcome isobaric and molecular interferences instead of relying on chemical separations.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

A review of rare earth elements and yttrium in coal ash: Content, modes of occurrences, combustion behavior, and extraction methods

Rare earth elements and yttrium (REY) have attracted considerable attention over the last decade because of their vital roles in clean energy, consumer product, national defense and security applications, among other uses. Due to the retention of REY during coal burning, coal combustion ash is considered as potential alternative sources for REY. Understanding the content, speciation, retention and/or transformation behavior of REY during coal combustion not only expands our knowledge of the combustion behavior of the trace elements in coal, but also provides basis for modeling REY partitioning during coal combustion and for developing economically viable REY recovery technologies. This review makes a critical summary of recent progress in the study of REY in coal ash. The contents and the extraction potentials of REY in coal ash derived from 15 major coal-producing countries worldwide were summarized and evaluated. Various analytical methods for determining REY bulk contents and speciation, together with the solid sample pretreatment, analytical accuracy and precision, advantages and disadvantages were summarized and compared. Modern analytical approaches combined indirect methods (e.g., sequential extraction) shed light on the physical distribution, mineralogy, and the chemical state of REY in coal ash. Three types of REY occurrences in coal ash, including Si-Al glassy association, discrete minerals or compounds, and organic association (bound with unburned carbon) were defined in the review. The glassy association can be further divided into REY minerals closely bound to glass phases and dispersed throughout the glassy structure. REY partitioning in various emission streams, the size distribution, and their enrichment behavior in coal ash were discussed. Additionally, thermal behavior and transformation of various REY forms in coal during combustion process, including organic-associated REY, REY phosphates, REY carbonates, clay-bound REY and among others were summarized. Two possible retention mechanisms of REY by aluminosilicate glass at boiler temperature were proposed: the incorporation of the individual REY phases into the glass as inclusions and the diffusion of REY phases throughout Si-Al glass structures in the melting process. Feed coal mineral types, mineral-mineral associations, boiler conditions, and other factors control the retention process. After coal combustion, the speciation of REY in fly ash may be modified by the reactions of REY phases with flue gas components. Further, an overview of REY transformation mechanisms during coal combustion was deeply discussed. Finally, current extraction techniques for REY recovery from coal combustion ash were introduced. Future outlooks and research problems were also identified.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Emergence of deep eutectic solvents (DES): chemistry, preparation, properties, and applications in biorefineries and critical materials

The emergence of renewable deep eutectic solvents (DES) as clean and efficient catalysts and solvents has created new opportunities for lignocellulosic biorefineries and critical material sectors, including chemical, energy, pharmaceutical, textile, and hydrometallurgical industries. This review provides an in-depth overview of DES, covering their chemistry, classifications, preparation methods, processing characteristics, and recyclability, while highlighting their unique attributes and industry relevant applications. Emphasis is placed on the integration of DES into advanced biorefinery systems, focusing on their tunable physicochemical and thermodynamic properties for biomass pretreatment and the production of value-added products. The review explores how DES can be tuned for selective dissolution of biomass components and evaluates production and valorization of DES-derived biochemicals, with attention to lignin extraction mechanisms and conversion of biomass into bioproducts and biofuels. Beyond biorefineries, the scope extends to DES applications in electrochemical energy devices, where they serve as electrolytes, synthesis media for electrode materials, and leaching agents in battery recycling. The multifunctional roles of DES in pharmaceutical, hydrometallurgical, and textile sectors are also explored for contributions to sustainable processing. Finally, the review identifies future research directions, outlining benefits, challenges, and knowledge gaps, for continued industrial development.

09 BIOMASS FUELS↗
DOE OSTI2019

Influence of Clay size on corrosion protection by Clay nanocomposite thin films

In this work, the influence of clay platelet size on the corrosion barrier performance of highly-aligned polymer clay nanocomposite (PCN) thin films was examined. Layer-by-layer (LbL) deposition of alternating branched polyethylenimine (PEI) and either laponite (LAP), montromorillonite (MMT) or vermiculite (VMT) clay platelets were assembled on mild steel plates to obtain 20 bilayer (BL) films and cross-linked using glutaraldehyde after deposition. The clay platelets were chosen based on their aspect ratio, approximately 30:1, 400:1, and 2000:1, respectively. Electrochemical impedance spectroscopy of the coated steel plates during immersion showed corrosion rates and coating permeability followed LAP > MMT > VMT for up to 7 days of exposure in 0.6 M NaCl. The PEI/VMT films, ~250 nm thick, slowed corrosion by a factor of >1000 compared to bare steel. The results support the premise that high aspect ratio clay platelets can improve the corrosion barrier efficacy of LbL PCN films by decreasing film permeability and provide exceptional protection to steel in saline environments compared to other thin multilayer coatings and pretreatments.

36 MATERIALS SCIENCE↗
DOE OSTI2022

The contribution of the neuroendocrine system to adaption after repeated daily ozone exposure in rats

Ozone-induced lung injury/inflammation dissipates despite continued exposure for 3 or more days; however, the mechanisms of adaptation/habituation remain unclear. Since ozone effects are mediated through adrenal-derived stress hormones, which also regulate longevity of centrally-mediated stress response, we hypothesized that ozone-adaptation is linked to diminution of neuroendocrine stress-axes activation and glucocorticoid levels. Male Wistar-Kyoto-rats (12-week-old) were injected with vehicle or a therapeutically-relevant dexamethasone dose (0.01-mg/kg/day; intraperitoneal) for 1-month to determine if suppression of glucocorticoid signaling was linked to adaptation. Vehicle- and dexamethasone-treated rats were exposed to air or 0.8-ppm ozone, 4 h/day × 2 or 4 days to assess the impacts of acute exposure and adaptation, respectively. Dexamethasone reduced thymus and spleen weights, circulating lymphocytes, corticosterone and increased insulin. Ozone increased lavage-fluid protein and neutrophils and decreased circulating lymphocytes at day-2 but not day-4. Ozone-induced hyperglycemia, glucose intolerance and inhibition of beta-cell insulin release occurred at day-1 but not day-3. Ozone depleted circulating prolactin, thyroid-stimulating hormone, and luteinizing-hormone at day-2 but not day-4, suggesting central mediation of adaptation. Adrenal epinephrine biosynthesis gene, Pnmt, was up-regulated after ozone exposure at both timepoints. However, genes involved in glucocorticoid biosynthesis were up-regulated after day-2 but not day-4, suggesting that acute 1- or 2-day ozone-mediated glucocorticoid increase elicits feedback inhibition to dampen hypothalamic stimulation of ACTH release in response to repeated subsequent ozone exposures. Although dexamethasone pretreatment affected circulating insulin, lymphocytes and adrenal genes, it had modest effect on ozone adaptation. In conclusion, ozone adaptation likely involves lack of hypothalamic response due to reduced availability of circulating glucocorticoids.

60 APPLIED LIFE SCIENCES↗