Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Phase correlation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Hydrodynamics of Two-Phase Flows through Porous Media in Microgravity: Packed Bed Reactor Experiment onboard of the International Space Station

The objective of the Packed Bed Reactor Experiment was to develop a fundamental understanding of the hydrodynamics of two-phase flow with no phase transition through porous media in microgravity. This work describes two experimental campaigns flown on the International Space Station (ISS) that were designed to achieve the objective. This work presents the results on flow patterns observed, two-phase flow pressure drop in porous media, and the impact of capillary effects on pressure drop at various gas and liquid flow rates. This work is the first to present predictive correlations of the two-phase friction factor for the different regimes identified based on the superficial liquid and gas velocity in microgravity, the first to hypothesize the different regimes based on the change in slope of the pressure gradient versus flow rate plots, the first to address the effects of the capillarity on the pressure gradient and the first to measure column holdup and assess the effective porosity based on the packing and the trapped gas bubbles. Experimental data on pressure drop in gas (N2) – liquid (water) flow show the presence of four different flow regimes in microgravity. Dispersed bubble flow (DB) and pulse (P) flow regimes are detected at high liquid flow rates, whereas at low liquid flow rates “large bubble” or elongated bubble (LB) and “gas channeling” (GC) regimes are observed. For these different flow regimes, different two-phase flow friction factor and pressure gradient correlations are presented for the first time as a function of the gas and liquid modified Reynolds numbers and Suratman number. Within the viscous-capillary (V-C) regime, it is found that the capillary contribution is the dominant force that contributes to the pressure drop for the wetting case (glass). However, for the non-wetting packing (Teflon), the viscous contribution dominates. It was found that the gas hold-up and pressure drop are functions of bed history at low liquid and gas flow rates with the magnitude of the hysteresis decreasing with increasing flow rates. PBRE-2 results show that the capillary force is a strong function of the superficial liquid velocity but is a much weaker function of the superficial gas velocity and varies inversely with the particle diameter. Within the Viscous-Capillary (V-C) regime, over 90% of the pressure gradient is attributed to the capillary contribution in the gas continuous regime. However, in the large bubble regime, the viscous and capillary contributions were comparable. After the completion of PBRE-2 with glass spherical beads, another bed packed with alumina was installed. Pressure gradient data for the alumina packed bed (PBRE-Water Recovery) were transferred to the PI and were not analyzed by the authors of this work. The Packed Bed Reactor Experiment concluded its on-orbit operation after two successful campaigns of testing in 2017 and in 2021. The flight hardware was brought back from orbit and is being reconditioned for a series of future experiments referred to as PBRE-WRS in support of water recovery (WRS). The WRS series consists of testing different two-phase fluid system components and packed beds to assess their pressure gradient characteristics, which will be used for designing packed bed reactors for various applications relevant to life support. Although there is so much relevance of the experimental results obtained from the two PBRE campaign in microgravity to life support, these findings also apply to other applications that involve two phase flow in porous medium such as fuel cells, transport of nutrient to plants in space and other chemical and materials processing that involve two phase flows. These systems operate differently in microgravity because, due to the lack of buoyancy, the density difference between the phases becomes irrelevant and no longer leads to phase separation.

Packed Bed↗

On the characteristics of the wake of a wind turbine undergoing large motions caused by a floating structure: an insight based on experiments and multi-fidelity simulations from the OC6 project Phase III

This study reports the results of the second round of analyses of the Offshore Code Comparison, Collaboration, Continued, with Correlation and unCertainty (OC6) project Phase III. While the first round investigated rotor aerodynamic loading, here, focus is given to the wake behavior of a floating wind turbine under large motion. Wind tunnel experimental data from the UNsteady Aerodynamics for FLOating Wind (UNAFLOW) project are compared with the results of simulations provided by participants with methods and codes of different levels of fidelity. The effect of platform motion on both the near and the far wake is investigated. More specifically, the behavior of tip vortices in the near wake is evaluated through multiple metrics, such as streamwise position, core radius, convection velocity, and circulation. Additionally, the onset of velocity oscillations in the far wake is analyzed because this can have a negative effect on stability and loading of downstream rotors. Results in the near wake for unsteady cases confirm that simulations and experiments tend to diverge from the expected linearized quasi-steady behavior when the rotor reduced frequency increases over 0.5. Additionally, differences across the simulations become significant, suggesting that further efforts are required to tune the currently available methodologies in order to correctly evaluate the aerodynamic response of a floating wind turbine in unsteady conditions. Regarding the far wake, it is seen that, in some conditions, numerical methods overpredict the impact of platform motion on the velocity fluctuations. Moreover, results suggest that the effect of platform motion on the far wake, differently from original expectations about a faster wake recovery in a floating wind turbine, seems to be limited or even oriented to the generation of a wake less prone to dissipation.

17 WIND ENERGY↗

Oxide dispersoid coherency of a ferritic-martensitic 12Cr oxide-dispersion-strengthened alloy under self-ion irradiation

Ferritic-martensitic oxide-dispersion-strengthened (ODS) alloy has shown excellent mechanical property and high radiation tolerance. However, the stability of dispersoids during displacive irradiation in the individual ferritic and martensitic phases is unclear. In this work, the correlation among dispersoid coherency, size, density, and matrix phase are studied in dual-phase 12Cr ODS after 100 peak displacements-per-atom (dpa) irradiation at 475°C, using 3.5 MeV Fe 2+ self-ions. The size and density changes of coherent and incoherent dispersoids were analyzed as a function of irradiation depth. The average dispersoid size decreased after irradiation in both phases, and the large incoherent dispersoids in the tempered martensite phase underwent a more dramatic change than those in the ferrite phase. The dispersoid density significantly increased in the ferrite phase within the irradiated region, mostly resulting in an increase in coherent dispersoid density. On the other hand, only a small change in density was observed in the tempered martensite phase for both coherent and incoherent dispersoids. This study shows that dispersoid evolution is dramatically different in ferrite and tempered martensite phases.

36 MATERIALS SCIENCE↗

Speciation and Organic Phase Structure in Nitric Acid Extraction with Trioctylamine

Understanding chemical speciation and intermolecular interactions in multicomponent liquids is essential to understanding their phase and chemical equilibria, which underpin chemical separation processes, including solvent extraction. Here we report on the extraction of nitric acid from its aqueous solutions into organic solutions of trioctylamine (TOA) in toluene, investigated with spectroscopic, X-ray scattering, and computational tools to understand molecular speciation in the organic phase and its relationship with the nanoscale structure of the organic phase. Trends in acid and water extraction clearly show two and three regimes, respectively, indicating different stoichiometric relationships, but speciation of HNO 3 , water, and amine in these regimes is not apparent. 1 H NMR of the organic phase shows that there are at least two distinct acidic protons in the organic phase while ATR-FTIR results show that the organic phase with excess acid extraction is a mixture of trioctylammonium-nitrate ion pairs (TOAHNO 3 ), and undissociated HNO 3 molecules. Comparison with DFT-computed IR spectra show that the chain-like configurations of TOAHNO 3 HNO 3 H 2 O are favored over TOAHNO 3 H 2 OHNO 3 , i.e., direct interaction between the nitrate and HNO 3 molecules is more favored compared to a water-mediated interaction. SAXS of the organic phases were modeled as sums of Ornstein-Zernike (O-Z) scattering and a prepeak feature in the higher Q region that corresponds to extractant packing. The extraction of undissociated HNO 3 by the ion pairs leads to an increased X-ray scattering contrast in the organic phase without any significant change in the correlation length. These results show that the organic phase nanostructure is more sensitive to the concentration of TOAHNO 3 and is relatively unaffected by excess acid extraction. Finally, these findings will enable a molecular understanding of the mechanisms behind metal extraction from acidic media with basic extractants.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cavitation in liquid cryogens. 2: Hydrofoil

Boundary layer principles, along with two-phase concepts, are used to improve existing correlative theory for developed cavity data. Details concerning cavity instrumentation, data analysis, correlative techniques, and experimental and theoretical aspects of a cavitating hydrofoil are given. Both desinent and thermodynamic data, using liquid hydrogen and liquid nitrogen, are reported. The thermodynamic data indicated that stable thermodynamic equilibrium exists throughout the vaporous cryogen cavities. The improved correlative formulas were used to evaluate these data. A new correlating parameter based on consideration of mass limiting two-phase flow flux across the cavity interface, is proposed. This correlating parameter appears attractive for future correlative and predictive applications. Agreement between theory and experiment is discussed, and directions for future analysis are suggested. The front half of the cavities, developed on the hydrofoil, may be considered as parabolically shaped.

Hord, J.↗

Observations of outbursts from the recurrent X-ray transient A0538-66 and LMC X-4

Nine X-ray outbursts from the LMC have been observed with the HEAO 1 Large-Area Sky Survey Instrument. Some are shown to originate in the recurrent transient A0538-66, confirming the proposed 16 day periodicity and showing that the duration of the events can be as long as 14 days or as short as a few hours. Deviations from precise periodicity can be attributed to phase jitter or to a change in period occurring around the time of an exceptionally long outburst. Other outbursts which are irregular and consistently shorter originate in LMC X-4. A long-term light curve indicates that the LMC X-4 outbursts occur only when the source is in a high state, but are not strongly correlated with the binary phase.

Skinner, G. K.↗

The Phase-Locking of Tropical North Atlantic and the Contribution of ENSO

The Tropical North Atlantic (TNA) is characterized by significant interannual variability in sea surface temperature (SST), which is phase-locked to the boreal spring. In this study, the phase-locking of TNA is investigated by adopting a linear stochastic-dynamical model (SDM) using seasonally modulated TNA feedbacks together with the seasonal modulation of ENSO forcing. In the observations, the role of local TNA feedbacks and ENSO forcing in TNA phase-locking are equivalently important with both preferring the peak of TNA variability to appear in the boreal spring. Besides, the seasonal modulation of TNA feedbacks and ENSO forcing strength are both mainly controlled by thermodynamic processes. In most climate models, the contribution of ENSO on TNA phase-locking is weaker than that in observations. The strength of ENSO-related TNA phase-locking is highly correlated with the relationship between ENSO and TNA, which is mainly determined by the amplitude of ENSO and its teleconnection patterns.

54 ENVIRONMENTAL SCIENCES↗

Four-Dimensional Quasielastic Neutron Scattering (4D-QENS) Analysis of Correlated Ionic Conduction in Sr⁢Cl2

Methods of elucidating the mechanisms of fast-ion conduction in solid-state materials are pivotal for advancements in energy technologies such as batteries, fuel cells, sensors, and supercapacitors. In this study, we examine the ionic conduction pathways in single crystal Sr⁢Cl2, which is a fast-ion conductor above 900 K, using four-dimensional quasielastic neutron scattering (4D-QENS). We explore both coherent and incoherent neutron scattering at temperatures above the transition temperature into the superionic phase to explore the correlated motion of hopping anions. Refinements of the incoherent QENS yield residence times and jump probabilities between lattice sites in good agreement with previous studies, confirming that ionic hopping along nearest-neighbor directions is the most probable conduction pathway. However, the coherent QENS reveals evidence of de Gennes narrowing, indicating the importance of ionic correlations in the conduction mechanism. This highlights the need for improvements both in the theory of ionic transport in fluorite compounds and the modeling of coherent 4D-QENS in single crystals.

Coles, Jared [Materials Science Division, Argonne ↗

Analytical Approach in DeCoM

There are many papers on describing a LHP as an overall system, but few detail on the condenser section of a loop heat pipe. The DeCoM (Deepak Condenser Model) method utilizes user set initial parameters in-order to simulate a condenser by calculating the interactions between the fluid and the wall. Equations are derived for two sections of the condenser: a two-phase section and a subcooled (liquid) section. All Equations are based upon the conservation of energy theory, from which fluid temperature, and fluid quality values are solved. In order to solve for the heat transfer value, between fluid and the wall in two phase section, the Lockhart-Martinelli correlation method was implemented as a solution approach. For Liquid phase, the Reynolds number was used in-order to differentiate the flow state, from either turbulent or laminar, and Nusselt number was used to solve for the film coefficient. To represent these calculations for both sections a flow chart is presented in order to display the execution process of DeCoM. The benefit of DeCoM is that it is capable of performing preliminary analysis without requiring a license and without much of users knowledge on condensers.

Patel, Deepak↗

Improving magnitude and phase comparison metrics for frequency response functions using cross-correlation and log-frequency shifting

This paper provides a new method for matching dominant features of Frequency Response Functions (FRFs). In particular, this paper proposes a slicing and shifting method where the key features (in this case, resonant amplitudes) of a baseline FRF are compared with a similar FRF using cross-correlation and a Log-Frequency Shift (LFS). Here, the goal is to provide an alternative to classic point-to-point methods for FRF comparison and instead to match the dominant features of two FRFs in a way similar to visual inspection. This enables existing FRF comparison metrics to then be applied with greater fidelity. Additionally, this paper introduces the Phase Similarity Metric (PSM) for comparing phases of two FRFs and illustrates the improvement of using LFS for phase comparisons as well. This paper uses a cantilever beam experiment in multiple configurations to provide a benchmark case for FRF comparison improvements.

42 ENGINEERING↗

Considerations for AMI-Based Operations for Distribution Feeders

More than $5 billion in investments in advanced metering infrastructure (AMI) technologies, AMI deployments, as pervasive secondary network voltage monitoring systems, provide opportunities for utility operations and controls. This paper focuses on the considerations for AMI-based tools and techniques as the industry moves toward operationalizing such large data sets. Phase identification is a first such tool. Numerous distribution network analysis, monitoring, and control applications - including volt/volt-ampere reactive control, state estimation, and distribution automation - require accurate phase connectivity information in the system models. The phase connectivity database maintained by utilities is inaccurate because of a significant amount of missing data, restoration activities, and network reconfiguration. Existing phase identification techniques that estimate phase connectivity work well in distribution feeders that have low or no photovoltaic (PV) generation; however, they fail to identify the phases accurately when considerable PV generation is present. This work addresses the phase identification problem in the presence of high PV generation using statistical analysis methods. Further, insights into the AMI data requirements for this application in terms of data window length and resolution are provided using sensitivity analysis performed on an actual distribution feeder model of San Diego Gas & Electric Company. The results of this study show that the phase connectivity, even in the presence of high PV generation, can be accurately identified using statistical analysis of AMI data of 1 day.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Spectral induced polarization (SIP) measurements across a PFAS-contaminated source zone

There is a pressing need for the development of field-scale, in situ screening technologies for assessing variations in aqueous film forming foam (AFFF) concentrations in soils at former fire training and storage sites. Field-scale Spectral Induced Polarization (SIP) geophysical measurements were acquired on a transect crossing an AFFF source zone. Soil samples were acquired from ten locations and used to determine variations in poly- and per-fluoroalkyl substances (PFAS) concentrations in soils and soil texture. These samples were also used to create triplicate soil columns for laboratory-grade SIP measurements. Field and laboratory observations provide evidence that SIP measurements are sensitive to the concentration of AFFF constituents associated with the pore surface in soils. The phase of the SIP measurements on the laboratory samples was linearly correlated with total soil-sorbed PFAS concentration. The phase from the field SIP measurements was highest over the location of maximum PFAS concentration measured on the laboratory samples, although a significant correlation between field-measured phase and laboratory-measured total PFAS concentration was not established. The sensitivity of the SIP response to the removal of soil PFAS using a methanol wash procedure (total PFAS concentration drop of 366 ppb) adds evidence for the case for SIP characterization of AFFF source zones. The results of these studies suggest that SIP might be developed into a field-scale technology for rapid, indirect assessment of AFFF source zones. Such a technology could improve the effectiveness of AFFF source zone characterization at reduced costs.

58 GEOSCIENCES↗

Turbulent Statistics from Time-Resolved PIV Measurements of a Jet Using Empirical Mode Decomposition

Empirical mode decomposition is an adaptive signal processing method that when applied to a broadband signal, such as that generated by turbulence, acts as a set of band-pass filters. This process was applied to data from time-resolved, particle image velocimetry measurements of subsonic jets prior to computing the second-order, two-point, space-time correlations from which turbulent phase velocities and length and time scales could be determined. The application of this method to large sets of simultaneous time histories is new. In this initial study, the results are relevant to acoustic analogy source models for jet noise prediction. The high frequency portion of the results could provide the turbulent values for subgrid scale models for noise that is missed in large-eddy simulations. The results are also used to infer that the cross-correlations between different components of the decomposed signals at two points in space, neglected in this initial study, are important.

Dahl, Milo D.↗

Turbulent Statistics from Time-Resolved PIV Measurements of a Jet Using Empirical Mode Decomposition

Empirical mode decomposition is an adaptive signal processing method that when applied to a broadband signal, such as that generated by turbulence, acts as a set of band-pass filters. This process was applied to data from time-resolved, particle image velocimetry measurements of subsonic jets prior to computing the second-order, two-point, space-time correlations from which turbulent phase velocities and length and time scales could be determined. The application of this method to large sets of simultaneous time histories is new. In this initial study, the results are relevant to acoustic analogy source models for jet noise prediction. The high frequency portion of the results could provide the turbulent values for subgrid scale models for noise that is missed in large-eddy simulations. The results are also used to infer that the cross-correlations between different components of the decomposed signals at two points in space, neglected in this initial study, are important.

Dahl, Milo D.↗

Turbulent Statistics From Time-Resolved PIV Measurements of a Jet Using Empirical Mode Decomposition

Empirical mode decomposition is an adaptive signal processing method that when applied to a broadband signal, such as that generated by turbulence, acts as a set of band-pass filters. This process was applied to data from time-resolved, particle image velocimetry measurements of subsonic jets prior to computing the second-order, two-point, space-time correlations from which turbulent phase velocities and length and time scales could be determined. The application of this method to large sets of simultaneous time histories is new. In this initial study, the results are relevant to acoustic analogy source models for jet noise prediction. The high frequency portion of the results could provide the turbulent values for subgrid scale models for noise that is missed in large-eddy simulations. The results are also used to infer that the cross-correlations between different components of the decomposed signals at two points in space, neglected in this initial study, are important.

Dahl, Milo D.↗

First-principles comparative study of Cr migration in O3 and O/P hybrid-phased NaCrO 2

In layered Na transition-metal (TM) oxides, TM migration usually occurs at highly charged states and severely deteriorates the capacity and reversibility. Meanwhile, the formation of hybrid phases with the intergrowth of octahedral (O-type) and prismatic (P-type) Na layers also takes place at highly charged states. These hybrid phases are often more stable than simple O3 or P3 stackings. However, little is known about the mechanism and impact of TM migration in these hybrid phases. In this work, a comparative first-principles study is performed to understand the connections between structural changes and Cr migration in layered O3 and hybrid-phased NaCrO 2 . After Cr migration, the hybrid-phased NaCrO 2 suffers from greater layer shrinkage than the O3 phase. Three factors affect the Cr migration energy E mig : the Na concentration, local 3D configurations, and 2D in-plane geometries. Low Na concentrations and certain local 3D configurations facilitate the Cr migration. The Cr migration barriers in both O3 and hybrid-phased NaCrO 2 are positively correlated with the Cr E mig . The Cr migration in 17 doped O3 and hybrid-phased NaCrO 2 is surveyed. In these doped NaCrO 2 , a more uniform distribution of the Cr–O bond lengths usually suggests suppressed Cr migration. Optimal dopants for suppressing Cr migration are identified by considering E mig for both Cr and the dopant. Finally, our comparative study on Cr migration in O3 and hybrid-phased NaCrO 2 reveals the significant role of hybrid-phased structures in the development of layered cathode materials.

36 MATERIALS SCIENCE↗

Coherent optical correlator using a deformable mirror device spatial light modulator in the Fourier plane

Attention is given to experimental results for a binary phase-only filter implementation's correlation operations, using the deformable mirror device (DMD) spatial light modulator as the Fourier plane filter. These results demonstrate the basic capabilities of the DMD in an image correlator system which, in combination with the potential 8-kHz frame rate for 128 x 128 DMDs, can constitute a very high speed pattern recognition system. The DMD has the further capability of operating in the analog mode.

Florence, James M.↗

Local distortion driven magnetic phase switching in pyrochlore Yb 2 ( Ti 1 - x Sn x ) 2 O 7

While it is commonly accepted that the disorder induced by magnetic ion doping in quantum magnets usually generates a rugged free-energy landscape resulting in slow or glassy spin dynamics, the disorder/distortion effects associated with nonmagnetic ion sites doping are still illusive. Here, using AC susceptibility measurements, we show that the mixture of Sn/Ti on the nonmagnetic ion sites of pyrochlore Yb 2 ⁢(Ti 1-x⁢ Sn x ) 2⁢ O 7 induces an antiferromagnetic ground state despite both parent compounds, Yb 2 ⁢Ti 2 ⁢O 7 and Yb 2 ⁢Sn 2⁢ O 7 , order ferromagnetically. Local structure studies through neutron total scattering reveals the local distortion in the nonmagnetic ion sites and its strong correlation with the magnetic phase switching. Further, our study demonstrates the local distortion as induced by the nonmagnetic ion site mixture could be a new path to achieve magnetic phase switching, which has been traditionally obtained by external stimuli such as temperature, magnetic field, pressure, strain, light, etc.

74 ATOMIC AND MOLECULAR PHYSICS↗