Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Patterning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Ring patterns generated by an expanding colloidal meniscus

The drop-and-dry is a common technique allowing for creation of periodic nanoparticle (NP) structures for sensing, photonics, catalysis, etc. However, the reproducibility and scalability of this approach for fabrication of NP-based structures faces serious challenges due to the complexity of the simple, at first glance, evaporation process. In this work we study the effect of the spatial confinement on the NP self-assembly under slow solvent evaporation, when the air-liquid-substrate contact line (CL) expands from the center towards the walls of a cylindrical cell, forming a toroid. Using in situ video monitoring of the stick-slip CL motion, we find regular hydrodynamic perturbations in the meniscus, and reveal fine details of the formation of quasiperiodic rings of close packed NP layers. We report that drying of the toroidal NP droplet has a number of important differences from drying of the classical hemispherical colloidal drops. In toroidal drops we observe linear-in-time average meniscus motion, in contrast to the hemispherical drops where the meniscus moves as a square root of time. While both droplet geometries produce NP ring patterns, the ring width for the toroidal drop decreases with increasing ring radius, while it decreases with decreasing the radius of the hemispherical drop. We suggest that free ligands are the main cause of the Marangoni instabilities driving the periodic vorticity in the meniscus. Finally, we show that the usually ignored contact line tension may yield a considerable contribution to the CL pinning causing the CL slip-stick motion and the ring formation.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Layered patterns of active scalar fields in a two-dimensional magnetohydrodynamic system

Here, we observe the formation of staircase patterns in the magnetic potential (𝐴) in a weakly magnetized two-dimensional magnetohydrodynamic system driven by a forced, fluctuating vortex array. Layering occurs due to inhomogeneous mixing of 𝐴 by vortex cells. Magnetic Reynolds number (𝑅 𝑚 )–dependent quenching of the turbulent diffusion of 𝐴 by weak magnetic fields increases the disparity between the (short) cell circulation time and the (long) time for intercell transport of magnetic potential. Thus, magnetic fields strengthen transport barriers between cells and reinforce the staircase, relative to its passive scalar counterpart. The analysis reveals a feedback mechanism, which promotes staircase formation. Magnetic staircases persist in both the flux expulsion (𝑅 𝑚 ⁢𝑣$^2_𝐴$/𝑈$^2_0$<1) and vortex disruption (𝑅 𝑚 ⁢𝑣$^2_𝐴$/𝑈$^2_0$≥1) limits. In the latter case, residual vortex cells homogenize 𝐴. Global layering morphology is shown to be well characterized by staircase curvature. Stochastic forcing of magnetic potential can support magnetic staircases against resistive decay.

magnetohydrodynamics↗
DOE OSTI2023

Convection-Induced Compositional Patterning at Grain Boundaries in Irradiated Alloys

We consider the stability of precipitates formed at grain boundaries (GBs) by radiation-induced segregation in dilute alloys subjected to irradiation. Here, the effects of grain size and misorientation of symmetric-tilt GBs are quantified using phase field modeling. A novel regime is identified where, at long times, GBs are decorated by precipitate patterns that resist coarsening. Maps of the chemical Péclet number indicate that arrested coarsening takes place when solute advection dominates over thermal diffusion right up to the precipitate/matrix interface, preventing interfacial local equilibrium and overriding capillary effects. This contrasts with liquid-solid mixtures where convection always accelerates coarsening.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Search for Soft Unclustered Energy Patterns in Proton-Proton Collisions at 13 TeV

The first search for soft unclustered energy patterns (SUEPs) is performed using an integrated luminosity of 138 fb −1 of proton-proton collision data at $\sqrt{𝑠}$ = 13 TeV, collected in 2016–2018 by the CMS detector at the LHC. Such SUEPs are predicted by hidden valley models with a new, confining force with a large ’t Hooft coupling. In events with boosted topologies, selected by high-threshold hadronic triggers, the multiplicity and sphericity of clustered tracks are used to reject the background from standard model quantum chromodynamics. With no observed excess of events over the standard model expectation, limits are set on the cross section for production via gluon fusion of a scalar mediator with SUEP-like decays.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Microstructural pattern formation during liquid metal dealloying: Phase-field simulations and theoretical analyses

In recent years, liquid metal dealloying has emerged as a promising material processing method to generate micro- and nanoscale bicontinuous or porous structures. Most previous studies focused on the experimental characterization of the dealloying process and on the properties of the dealloyed materials, leaving the theoretical study incomplete to fully understand the fundamental mechanisms of the liquid metal dealloying process. In this paper, we use theoretical models and phase-field simulations to clarify the kinetics and pattern formation during liquid metal dealloying. Our investigation starts from a theoretical analysis of the 1D dissolution of a binary precursor alloy, which reveals that the 1D dissolution process involves two regimes. In the first regime, due to the low solubility of one of the elements in the melt, it accumulates at the solid-liquid interface, which reduces the dissolution kinetics. In the second regime, the interface kinetics reaches a stationary regime where both elements of the precursor alloy dissolve into the melt. Previous works revealed that in the early dealloying stage, the dealloying front is destabilized by an interfacial spinodal decomposition, which triggers the formation of interconnected ligaments. Here we extend this line of work by proposing a linear stability analysis able to predict the initial length scale of the ligaments formed in the initial stage of the dealloying. Combining this analysis with the 1D dissolution model proposed here enables us to better understand the initial conditions (composition of the precursor alloy and the melt) leading to a planar dissolution without interface destabilization. Finally, we report a strong influence of solid-state diffusion on dealloying. Although the solid-state diffusivity is four to five orders of magnitude smaller than in the liquid phase, it is found to affect both dissolution kinetics and ligament morphologies.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Self-generated electrokinetic flows from active-charged boundary patterns

We develop a hydrodynamic description of self-generated electrolyte flow in capillaries whose bounding walls feature nonuniform distributions of charge nonuniform active ionic fluxes. The hydrodynamic velocity arising in such a system has components that are forbidden by symmetry in the absence of charge and fluxes. However, when these two boundary mechanisms are simultaneously present, they can lead to a symmetry broken state where steady flows with both unidirectional and circulatory components emerge. We show that these flow states arise when modulated boundary patterns of charge and fluxes are offset by a flux-charge phase difference, which is associated with the separation between sites of their peak densities on the wall. Mismatch in diffusivity of cationic and anionic species can modify the flow states and becomes an enhancing factor when fluxes of both ion species are being produced together at the same site. We demonstrate that this mechanism can be realized with a microfluidic generator that is powered by enzyme-coated patches that catalyze reactants in the solution to produce fluxes of ions. The local ionic elevation or depletion, which disrupts a nonuniform double layer, promotes self-induced gradients yielding persistent body forces to generate bulk fluid motion. Our work quantifies a boundary-driven mechanism behind self-sustained electrolyte flow in confined environments that exists without any external bulk-imposed fields or gradients. It provides a theoretical framework for understanding the combined effect of active and charged boundaries that are relevant in biological or soft matter systems, and can be utilized in electrofluidic and iontronic applications.

active matter↗
DOE OSTI2021

Automated prediction of lattice parameters from X-ray powder diffraction patterns

A key step in the analysis of powder X-ray diffraction (PXRD) data is the accurate determination of unit-cell lattice parameters. This step often requires significant human intervention and is a bottleneck that hinders efforts towards automated analysis. This work develops a series of one-dimensional convolutional neural networks (1D-CNNs) trained to provide lattice parameter estimates for each crystal system. A mean absolute percentage error of approximately 10% is achieved for each crystal system, which corresponds to a 100- to 1000-fold reduction in lattice parameter search space volume. The models learn from nearly one million crystal structures contained within the Inorganic Crystal Structure Database and the Cambridge Structural Database and, due to the nature of these two complimentary databases, the models generalize well across chemistries. A key component of this work is a systematic analysis of the effect of different realistic experimental non-idealities on model performance. It is found that the addition of impurity phases, baseline noise and peak broadening present the greatest challenges to learning, while zero-offset error and random intensity modulations have little effect. However, appropriate data modification schemes can be used to bolster model performance and yield reasonable predictions, even for data which simulate realistic experimental non-idealities. In order to obtain accurate results, a new approach is introduced which uses the initial machine learning estimates with existing iterative whole-pattern refinement schemes to tackle automated unit-cell solution.

42 ENGINEERING↗
DOE OSTI2025

Evaluating the Impact of Power Outages on Occupancy Patterns During the 2021 Texas Power Crisis

Large-scale power outages, such as those caused by extreme weather events, have a big impact on human behavior. A short power outage is merely a nuisance for most, and may not change people's locations. An outage that lasts for a few hours can result in spoiled food and medical supplies, and people will have to restock spoiled items. Long outages result in temperatures outside tolerable levels in homes, and may prompt people to acquire supplies, such as generators and gas, or change location. The long outages during Winter Storm Uri in Texas resulted in millions of dollars in property damage due to freezing pipes. This level of damage is expected to result in a sharp increase in supply runs and contractor activity. In this paper, we present a tool to explore differences in visiting patterns before, during, and after power outages. It allows to compare different points of interest like medical facilities, grocery stores, hardware stores, and other types of businesses.

big data↗
DOE OSTI2022

Towards Automatic Mapping of Vulnerabilities to Attack Patterns using Large Language Models

With the advent of new devices and applications, cyber attack surface is continuously evolving due to the emergence of new attack techniques and vulnerabilities. Hence, security management tool must assess the cyber risk of an enterprise at regular interval basis through comprehensively identifying associations among attack techniques, weakness, and vulnerabilities. However, existing repositories providing such associations are incomplete (i.e., missing associations), inducing the likelihood of undermining the risk of particular set of attack techniques. Moreover, such associations still rely on manual interpretation, which is slow compared to attack speed and ineffective for the increasing list of vulnerabilities and attack actions. Therefore, there is an urge to develop methodologies for automatically associating vulnerabilities to all relevant attack techniques. In this paper, we present a framework, named VWC-MAP, that can automatically identify all relevant attack techniques of a vulnerability via weakness based on their text descriptions, applying natural language process (NLP) techniques. To achieve that, we present a novel two-tiered classification approach, where the first tier classifies vulnerabilities to weakness, and the second tier classifies weakness to attack techniques. This research has improved the scalability of the current state-of-the-art tool to make vulnerability to weakness mapping significantly faster. Moreover, this paper presents two novel approaches for weakness to attack technique mapping applying Text-to-Text and link prediction techniques. Our experiment results cross-validated through cyber-security experts show that VWC-MAP can associate vulnerabilities to weakness types with 87% accuracy and to new attack patterns with 80% accuracy.

Das, Siddhartha Shankar↗
DOE OSTI2024

Mixed Delay/Nondelay Embeddings Based Neuromorphic Computing with Patterned Nanomagnet Arrays

Patterned nanomagnet arrays (PNAs) have been shown to exhibit a strong geometrically frustrated dipole interaction. Some PNAs have also shown emergent domain wall dynamics. Previous works have demonstrated methods to physically probe these magnetization dynamics of PNAs to realize neuromorphic reservoir systems that exhibit chaotic dynamical behavior and high-dimensional nonlinearity. These PNA reservoir systems from prior works leverage echo state properties and linear/nonlinear short-term memory of component reservoir nodes to map and preserve the dynamical information of the input time-series data into nondelay spatial embeddings. Such mappings enable these PNA reservoir systems to imitate and predict/forecast the input time series data. However, these prior PNA reservoir systems are based solely on the nondelay spatial embeddings obtained at component reservoir nodes. As a result, they require a massive number of component reservoir nodes, or a very large spatial embedding (i.e., high-dimensional spatial embedding) per reservoir node, or both, to achieve acceptable imitation and prediction accuracy. These requirements reduce the practical feasibility of such PNA reservoir systems. To address this shortcoming, we present a mixed delay/nondelay embeddings-based PNA reservoir system. Our system uses a single PNA reservoir node with the ability to obtain a mixture of delay/nondelay embeddings of the dynamical information of the time-series data applied at the input of a single PNA reservoir node. Our analysis shows that when these mixed delay/nondelay embeddings are used to train a perceptron at the output layer, our reservoir system outperforms existing PNA-based reservoir systems for the imitation of NARMA 2, NARMA 5, NARMA 7, and NARMA 10 time series data, and for the short-term and long-term prediction of the Mackey Glass time series data.

Ti, Changpeng↗
DOE OSTI2020

Leveraging Fine-Grained Occupancy Estimation Patterns for Effective HVAC Control

As occupancy sensing technologies become mature, various occupancy sensors are increasingly deployed in commercial buildings for pervasive occupancy monitoring. These sensors provide occupant-count data, which contains rich spatiotemporal information about occupancy patterns. With long-term occupant-count data collected from a commercial building, we design three different predictive models that capture the occupancy dynamics and examine how a model predictive control of the HVAC system benefits from actual occupancy count prediction. Our analysis reveals that mispredictions of occupancy states, especially false positives and false negatives, may introduce inefficient control that leads to energy waste or user discomfort. To address this issue, we take a step further to design an adaptive model predictive controller that minimizes inefficient control actions according to misprediction types and distributions. A comprehensive evaluation is performed in OpenBuild and EnergyPlus simulators to study the effectiveness of the proposed end-to-end control strategy. The evaluation shows that the proposed solution reduces energy consumption by 29.5% while improving the average weighted occupants comfort by 86.7% in Predicted Mean Vote (PMV) over the fixed schedule strategy.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

MetaPoL: Immersive VR based Indoor Patterns of Life (PoL) and Anomalies Data Generation for Insider Threat Modeling in Nuclear Security

Insider threats are perhaps the most serious challenges that nuclear and radiological security systems face. Insiders pose such a great threat due to their access, authority, and knowledge, granting them opportunities to bypass dedicated nuclear and radiological security elements. For example, in one of the latest major insider threat incidents to nuclear security, the Doel-4 nuclear powerplant in Belgium suffered a shutdown, the threat of nuclear materials diversion, and long-term loss of tens of millions of dollars. Seven years of investigation concluded that it was an inside job and attempted sabotage. In this regard, there is an immediate need for R&D and technology integration in the domain of modeling indoor Patterns-of-Life (PoL) and anomaly detection. This can be achieved by using datasets of facility users’ mobility and activity, which can support the design of algorithms for insider threat modeling and detection. However, due to classification, privacy, sensitivity, and safety protocols, such datasets from real physical nuclear reactor facilities are not only hard to share, but also not always feasible to deploy and collect. Aiming to find an alternate solution, our proposed demonstration work - MetaPoL, is the first-ever (for the application space) immersive VR (virtual reality) environment of a real-world secure facility and allows users to move-and-stay through the designed indoor physical layout and also encounter NPCs (non-player characters) that emulate other facility users. In the MetaPoL an interactive user performs realistic spatio-temporal movement, dwelling and activities using a Meta Quest Pro VR headset, and that generates high-frequency (in time) high-resolution (in space) indoor spatial-temporal datasets that are valuable for PoL modeling and anomaly detection research specifically for insider threat modeling and detection mission. Such generated realistic, rich in context, and mission specific datasets can boost AI/Machine Learning based research for modeling and detecting insider threats in nuclear security and nonproliferation.

Gunaratne, Chathika↗
DOE OSTI2025

GRUMDN: A Multi-Task Model for Predicting Human Patterns-of-Life from Stay Transition Data

Understanding human patterns-of-life (PoL) is essential towards ensuring safe and secure indoor facility environment as well as outdoor urban environment. Prediction of human movement in between places of interest is vital in understanding human PoL. Movement between spaces maybe represented and detected in one of the two forms: 1) trajectories: locations measured at regular time intervals by mobile sensors, bluetooth or GPS sensors; or 2) stay transitions: semantic PoI (points of interest) and stay duration data measurable by eventbased sensors that collect data when a check-in or check-out event is detected. Stay transition data provides a more compressed data format compared to trajectories data, especially in situations with longer stay durations, while preserving the information necessary for PoL analysis. Now as introduced briefly in the paper, our deployed end application (Digital Twin of a facility with non-player characters, besides the interactive user in virtual reality) needed a well-performing and validated AI/ML model for simulating high quality stay transitions behavior. In this study we thus primarily present our findings with developing and validating that model, which is a multi-task neural network for stay transition prediction. The neural network consists of two heads, for corresponding two tasks of stay category prediction and stay duration prediction. We evaluated gated recurrent units and multi-layer perceptrons of varying network sizes for stay category prediction; while mixture density networks, noisy generator-only networks, and generative adversarial networks of varying network sizes for stay duration prediction. We have then evaluated four multi-task models, constructed by combining these specialized models, on their ability to predict stay transition data. We tested our models on datasets from two different cases: 1) a simulation-generated dataset of indoor movement within the HFIR (high flux isotope reactor) nuclear reactor facility at Oak Ridge National Laboratory (ORNL); and 2) the GeoLife human mobility dataset of outdoor urban movement available in literature. Our results indicate that GRUMDN, which combines gated recurrent units (GRU) for stay category prediction task, and mixture density networks (MDN) for stay duration prediction task, did overall outperform other multitask models and the current state-of-the-art.

Gunaratne, Chathika [ORNL] (ORCID:0000000225088745↗
DOE OSTI2023

Self-Assembled Monolayer Patterning for PolySi/SiO2 Passivated Contacts

We utilize hexamethyldisilazane (HMDS) based self assembled monolayers to pattern polysilicon (polySi) passivated contacts. We find process conditions that allow for etching front side n/polySi between fingers; thereby increasing Jsc. Importantly, the Voc does not degrade indicating the additional process steps do not introduce defects or impurities. HMDS layers remain on the surface for metallization without detriment to transport.

degradation↗
DOE OSTI2024

PV Modules Temperature Variation and Patterns in Medium and Utility-Scale Floating PV Systems

This paper presents the preliminary results and findings of the four operational Floating PV systems across the USA. At each site, temperature of five PV modules located at North-West, North-East, Middle, South-West, and, South-East have been monitored through the Resistant Temperature Detector (RTD) sensors. Three RTDs were attached to each PV module on the rear-side along the diagonal at top, middle and bottom cells. The preliminary results reveal wide temperature differences among the inter and intra PV modules. Besides this, wave pattern temperatures were observed in a few PV modules. The final results, findings, and, factors responsible will be investigated during the next few months.

array↗
DOE OSTI2020

A Generic Multivector Model Predictive Control With Symmetric Pulse Pattern for Hybrid Multilevel Converters

This article presents a generic multivector model predictive control (MV-MPC) method that has the potential to be applied to all hybrid multilevel converters (HMCs). It first locates the reference voltage vector in the 120° oblique coordinate to select the three adjacent voltage vectors to be applied over one control cycle. Then, the current tracking is guaranteed through duty cycle optimization and dc capacitor voltages are balanced by evaluating possible switching sequences that belong to the voltage vectors with optimal duty cycles. At last, the optimal switching sequence with a symmetric five- or seven-segment pulse pattern is generated using an external modulator. Here, the proposed generic MV-MPC can significantly improve the quality of the output current, while achieving a constant equivalent switching frequency at the same time. Experimental studies on an all silicon carbide HMC prototype, i.e., an active neutral point clamped converter with cascaded H-bridge, are presented to validate the effectiveness of the proposed MV-MPC strategy.

42 ENGINEERING↗
DOE OSTI2021

Analysis of GPU Data Access Patterns on Complex Geometries for the D3Q19 Lattice Boltzmann Algorithm

GPU performance of the lattice Boltzmann method (LBM) depends heavily on memory access patterns. When implemented with GPUs on complex domains, typically, geometric data is accessed indirectly and lattice data is accessed lexicographically. Although there are a variety of other options, no study has examined the relative efficacy between them. Here, we examine a suite of memory access schemes via empirical testing and performance modeling. We find strong evidence that semi-direct is often better suited than the more common indirect addressing, providing increased computational speed and reducing memory consumption. For the layout, we find that the Collected Structure of Arrays (CSoA) and bundling layouts outperform the common Structure of Array layout; on V100 and P100 devices, CSoA consistently outperforms bundling, however the relationship is more complicated on K40 devices. When compared to state-of-the-art practices, our recommendations lead to speedups of 10–40 percent and reduce memory consumption up to 17 percent. Using performance modeling and computational experimentation, we determine the mechanisms behind the accelerations. We demonstrate that our results hold across multiple GPUs on two leadership class systems, and present the first near-optimal strong results for LBM with arterial geometries run on GPUs.

42 ENGINEERING↗
DOE OSTI2022

Patterns and controls on island‐wide aboveground biomass accumulation in second‐growth forests of Puerto Rico

Abstract Understanding the heterogeneity of biomass accumulation in second‐growth tropical forests following land use abandonment is important for informing ecosystem carbon models and forest restoration efforts. There is an urgent need for a broad sample of second‐growth forests to enhance our knowledge of carbon accumulation in human‐dominated landscapes, especially for older forests. Puerto Rico has predominantly second‐growth forests, ranging in age from approximately 25 to more than 80 years. We used an island‐wide sample of airborne lidar from the NASA Goddard Lidar, Hyperspectral, and Thermal (G‐LiHT) Airborne Imager collected on March 2017, forest inventory data, and data on forest age, precipitation, soils, and land use to estimate aboveground biomass stocks in moist and wet, second‐growth tropical forests. Biomass accumulation rates in Puerto Rico were lower, on average, than in other Neotropical forests. Median biomass across >16,700 ha of older second‐growth forests was 105 Mg ha −1 , and sampled biomass rarely surpassed 250 Mg ha −1 . Differences in biomass by age were large and persistent across different substrates and land uses, with a plateau in the pattern of island‐wide biomass accumulation after about 33 years. A spatial regression model showed that multiple factors were related to biomass accumulation, including time since abandonment, geologic substrate, past land use as coffee or pasture, precipitation, topographic wetness index, and slope. Our findings have important consequences for the total carbon storage and expected climate mitigation benefits of large‐scale reforestation efforts, and highlight the value of airborne lidar for quantifying biomass variability in complex tropical landscapes. Abstract in Spanish is available with online material.

54 ENVIRONMENTAL SCIENCES↗