Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Paper”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Grid ancillary services using electrolyzer-Based power-to-Gas systems with increasing renewable penetration

Increasing penetrations of renewable-based generation have led to a decrease in the bulk power system inertia and an increase in intermittency and uncertainty in generation. Energy storage is considered to be an important factor to help manage renewable energy generation at greater penetrations. Hydrogen is a viable long-term storage alternative. This paper analyzes and presents use cases for leveraging electrolyzer-based power-to-gas systems for electric grid support. The paper also discusses some grid services that may favor the use of hydrogen-based storage over other forms such as battery energy storage. Real-time controls are developed, implemented and demonstrated using a power-hardware-in-the-loop(PHIL) setup with a 225-kW proton-exchange-membrane electrolyzer stack. These controls demonstrate frequency and voltage support for the grid for different levels of renewable penetration (0%, 25%, and 50%). A comparison of the results shows the changes in respective frequencies and voltages as seen as different buses as a result of support from the electrolyzers and notes the impact on hydrogen production as a result of grid support. Finally, the paper discusses the practical nuances of implementing the tests with physical hardware, such as inverter/electrolyzer efficiency, as well as the related constraints and opportunities.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

Human electromagnetic field exposure in wearable communications systems: A review

While wearable technologies have taken essential parts of our daily lives, concerns on human health are often overseen. Mainly due to extreme proximity or direct physical contact to human skin, wearable communications devices are prone to cause higher levels of electromagnetic field (EMF) exposure at human skin surface than any other type of wireless technologies. Nevertheless, while focusing on theoretical aspects of human EMF exposure in wearable communications, prior work paid little to no attention on exact exposure levels generated by commercial wearable devices that are already widely used by public consumers. In this context, this paper provides an extensive review of SAR from various commercial wearable devices that are currently sold in the market, as well as the analytical framework and the current measurement methodologies for standard compliance tests. To extend the discussion to general wearable communications, this paper presents simulation results adopting representative antenna patterns, which leads to suggestion of separation distances to keep the current safety guidelines. In particular, considering the increasing interest in millimeter wave (mmW), this paper sheds light on EMF exposure evaluated at 60 GHz and compares to results from 2.4 GHz.

42 ENGINEERING↗
DOE OSTI2020

Spontaneous Raman–LIF–CO–OH measurements of species concentration in turbulent spray flames

This paper presents new measurements of species concentrations, temperature and mixture fraction in selected regions of a turbulent ethanol spray flame. The line-Raman–LIF–COsingle bondOH setup developed at the Sandia's Combustion Research Facility is utilised to probe regions of a spray flame where laser breakdown of liquid droplets is avoided and the remaining interferences can be corrected. The spray flame is stabilised on the piloted Sydney needle spray burner, where axial translation of the liquid injecting needle in the air-blast stream can transition the spray from dilute to dense. The solution to obtaining successful measurements is found to be multifaceted and includes: the appropriate selection of flame conditions; high sensitivity of the Raman detection system permitting reduced laser energies; development of a pre-processing algorithm to reject strong droplet interferences; and application of the hybrid matrix inversion method combined with wavelet denoising to account for interference corrections and noise at the very low signal levels obtained. Unique and necessary for the successful measurements reported in this paper, a pre-processing algorithm is outlined that removes data points corrupted with strong interferences from droplets. These interferences arise from a range of sources, but the most intense are due to the laser interaction with surrounding mist or liquid fragments, such that measurements near the jet centreline are corrupted and hence discarded. Reliable measurements of mixture fraction, temperature obtained from the sum of the species number densities, and species mole fractions are reported for regions in the flames sufficiently far from the centreline. The paper demonstrates the feasibility of the judicious use of Raman scattering in turbulent spray flames, the results of which will be extremely useful for validating numerical simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Roadmap to an electron beam or X-ray center for industrial applications

Here, this paper introduces the topics that need consideration to allow an effective feasibility analysis of electron beams and/or X-rays technologies prior to potential investment and implementation of these technologies for industrial applications. It also highlights considerations for planning, developing and construction of an electron beam or X-ray facility The focus of this paper is on business topics and it provides details of where additional technical information can be found. The paper also describes current applications for electron beam and X-ray technologies to demonstrate their potential.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Design and performance validation of a high-temperature downhole permanent magnet generator used for an electro-pulse boring system in geothermal energy applications

Novel, direct-energy drilling technologies such as electro-pulse boring, have the potential to significantly increase the speed and depth of geothermal drilling but have not achieved widespread adoption due to several economic and technical barriers. One major challenge is that these drilling systems require electric power downhole. The current practice is to supply power to the drill string components by running electric cables down the geothermal well, but at the targeted well depths, this practice is cost-inhibitive, inefficient in terms of power consumption, and adds an additional failure point with the long cabling going through a highly corrosive, high-temperature environment. A solution to this problem is to develop high-temperature electric generator technology that can generate the required power downhole. Such a generator must also operate with high efficiency at the target downhole ambient temperature of 250 °C. In this paper, we investigate the various design considerations for this concept and subsequently design the downhole electric generator using a multi-objective design optimization approach. Through electromagnetic-, thermal- and short-circuit fault condition analysis, it is demonstrated that the optimized downhole electric generator concept presented in this paper can meet the performance requirements within this extreme drilling environment. Most remarkably, it is shown that a generator efficiency of 90% is achieved. In conclusion, to validate the results presented in this paper, a prototype generator is built and its performance is measured at 250 °C using a test bench uniquely developed for this application.

15 GEOTHERMAL ENERGY↗
DOE OSTI2024

Evaluation of sustainable waste management: An analysis of techno-economic and life cycle assessments of municipal solid waste sorting and decontamination

This study evaluates the economic and environmental feasibility of Municipal Solid Waste (MSW) sorting and decontamination technologies across urban, suburban, and rural areas. Using Techno-Economic Analysis (TEA) and Life Cycle Assessment (LCA), the research assesses cost-effectiveness and environmental impacts, with a focus on cost variability analyzed through Monte Carlo simulations. Findings indicate significant cost differences based on population density: rural areas incur high costs up to $$764/ton due to low waste volumes and limited infrastructure, whereas suburban and urban areas have more feasible costs ranging from $36.3 to $142.5/ton. Environmental impacts also vary, with greenhouse gas emissions at 171 kg CO 2 eq/ton for copy paper and 118.6 kg CO 2 eq/ton for plastics. PM2.5 levels are 9.1 g/ton for copy paper and 6.3 g/ton for plastics, with sorting lines being the main contributors. Monte Carlo simulations reveal a 50% probability of costs being below $$102.26/ton for copy paper and $115.8/ton for plastics in suburban settings. Further, the study underscores the importance of customized waste management strategies to improve economic viability and sustainability based on local conditions.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

A framework to collect human reliability analysis data for nuclear power plants using a simplified simulator and student operators

Data scarcity in human reliability analysis (HRA) has been a major challenge in the quantification process. Many institutes have collected HRA data through experiments using full-scope simulators with actual operators. Nevertheless, there are still some limitations to relying solely on full-scope studies. This paper aims to propose how full-scope data collection studies can be supported through the Simplified Human Error Experimental Program (SHEEP). The SHEEP framework was developed by Idaho National Laboratory (INL) to collect HRA data through a simplified simulator and student operators. This paper introduces the major tasks in the SHEEP framework, with a particular focus on differences that arise due to participant type (i.e., student vs. actual operator), based on experiments using a simplified simulator (i.e., the Rancor Microworld). This paper also describes whether the data collected via this approach could support a representative full-scope data collection study (i.e., the HuREX study) based on the experimental data.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2020

The synergy between stakeholders for cellulosic biofuel development: Perspectives, opportunities, and barriers

While understanding individual stakeholders' perspectives on the adoption and conversion to a biofuel-based landscape has been a subject of many previous studies on biofuels, there has been relatively little attention given to understanding how the interaction between multiple stakeholders involved in biofuel development could influence the widespread adoption of biofuel production. Here, this paper analyzes the key stakeholder interactions utilizing various data sources including survey results, social media posts, and empirical and theoretical analyses. An intensive review is conducted for a number of surveys and research papers on different aspects of biofuel development such as land use choices, biorefinery and transportation, infrastructure development, consumer priorities, environmental impacts, etc. Following that, a stakeholder synergy approach is applied to synthesizing typical responses of stakeholders, such as producers, consumers, biorefineries, rural communities, and the government, and discussing how their responses influence each other's decisions and the overall system performance. Based on the findings of inadequate stakeholder synergy, it is recommended that new surveys and further research should be conducted to understand why synergy between stakeholders in biofuel development is absent. Additionally, this paper provides research perspectives, including (1) applying cutting-edge text-mining techniques to conduct sentiment analysis, and research and public attention analysis; (2) using an agent-based model to simulate stakeholder interactions and understand the factors that influence stakeholder synergy and the emergence of a bioeconomy.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Alternative Ratemaking in the US: A Prerequisite for Grid Modernization or an Unwarranted Shift of Risk to Customers?

With increasing frequency, investor-owned electric utilities are requesting preferred cost recovery for "grid modernization" in multiple forms, from multi-year rate plans to riders. Utilities' claims that massive grid investment is necessary, and that exceptional investment requires exceptional cost recovery, are typically accepted by policymakers with little challenge. It is difficult for policymakers to resist the siren call of grid modernization's perceived outcomes, from improved reliability and resilience to reduced risks to safety and new customer technology adoption (electric vehicles, distributed energy resources, and more). This paper provides a contrarian viewpoint that is virtually absent as policymakers consider alternative ratemaking practices. It introduces the possibility that excess grid investment in the name of modernization is not only possible, and economically harmful, but has already occurred, encouraged by alternative ratemaking. It provides examples of common grid modernization expenditures the authors have identified as cost-ineffective in the course of their work. It also describes traditional grid planning practices with proven ability to address changing requirements over time, calling into question the need for exceptional grid modernization investment plans. Most important, the paper explains the moral hazard inherent in alternative ratemaking, and the fundamental shift in ratemaking risks and responsibilities from utilities to customers that results. The perspectives this paper presents are critical for policymakers to understand before adopting, extending, or expanding alternative ratemaking practices in their respective jurisdictions.

ENERGY PLANNING, POLICY, AND ECONOMY,POWER TRANSMI↗
DOE OSTI2023

Best practices in NMR metabolomics: Current state

A literature survey was conducted to identify current practices used by NMR metabolomics investigators when conducting and reporting their metabolomics studies. A total of 463 papers from 2020 and 80 papers from 2010 were selected from PubMed and were manually analyzed by a team of investigators to assess the extent and completeness of the experimental procedures and protocols reported. A significant number of the papers did not report on essential experimental details, incompletely stated which statistical methods were used, improperly applied supervised multivariate statistical analyses, or lacked validation of statistical models. A large diversity of protocols and software were identified, which suggests a lack of consensus and a relatively limited use of commonly agreed upon standards for conducting and reporting NMR metabolomics studies. In conclusion, the overall intent of the survey is to inform and encourage the NMR metabolomics community to develop and adopt best-practices for the field.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Integrating equity in transportation scenario planning: A systematic review

To address the growing uncertainties in the future transportation industry, planners and engineers have identified and implemented scenario planning, a multi-step and strategic approach, in long-range transportation planning. A comprehensive examination of how equity is envisioned, planned, and analyzed during this process remains absent, despite several key guidelines of scenario planning exercises. This paper conducts a systematic literature review focusing on how equity has been considered and evaluated in scenario planning. The resources include academic papers, agency reports, and materials from the recent scenario planning conference, the 2nd Conference on Scenario Planning in Transportation hosted by the Transportation Research Board. This paper examines equity in scenario planning in three important ways: 1) the ways equity has been integrated across steps; 2) how equity analysis has evolved; and 3) when it is necessary to consider equity. This work adds value to the existing body of knowledge by presenting the policy implications based on the review of the current scenario planning research and practices. Early policy recommendations include the need for more vertical equity evaluations, the construction of robustness and justice indicators, and the adoption of a flexible mindset of planning for rather than being fixated on a single scenario.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

A review of water valuation metrics: Supporting sustainable water use in manufacturing

In the manufacturing sector, water has been often considered too cheap to conserve. Such thinking relies on water valuations that limit the value of water to the price paid. Using such simple methods, the share of water cost to total manufacturing cost is significantly small, <3%. As a result, conserving water and enabling technology uptake is difficult to justify economically and slow to advance, hindering progress toward sustainable water use. However, the value of water to a manufacturer is far greater than the price paid. Valuations such as the true cost of water consider the additional in-plant treatment and energy costs and have been gaining greater traction in the manufacturing sector. However, true cost alone still undervalues water by not accounting for economic and social costs related to scarcity and environmental externalities. This paper makes the case and presents a framework for valuing manufacturing water beyond the price paid and the true cost. The proposed fuller valuation of manufacturing water takes into account the internal and opportunity costs associated with the realization of water risks. The paper follows with a review of a wide range of water valuation metrics, both at the specific industry level and regional/economy-wide level. The use of various valuation metrics incorporating the relationship between the change in value with change in water use, such as marginal value of water, shadow price, and elasticity at the specific industry level, has been limited in the U.S. manufacturing sector. Further, a limited number of studies exist on data-intensive subjective evaluation techniques such as computable general equilibrium modeling and input-output modeling for regional water valuation. After reviewing water value metrics, several recent case studies from manufacturers from the literature are presented to illustrate both the promise and challenges of a fuller valuation of water as proposed here. Some large multinational corporations have moved toward assessing the value of water via supply chain sustainability initiatives, environmental profit and loss accounting, estimating risk-adjusted values of water, hydro-economic modeling, natural capital asset valuation, and developing value chain indices. This paper provides policymakers and technology developers a framework for monetizing water value beyond its true cost and current metrics. If adopted, such fuller water valuations can help make the business case for the development and deployment of cost-effective water-conserving technologies, thereby improving the sustainability of the manufacturing sector with respect to water.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Improving convergence of the Matrix Power Control Algorithm for random vibration testing

Herein, this paper describes modifications to the Matrix Power Control Algorithm (MPCA) to improve convergence for Random Vibration Control (RVC) testing. In particular, this paper presents Multiple-Input Multiple-Output (MIMO) implementations of MPCA in simulation and experiment. An Euler–Bernoulli beam model was simulated with applied base excitations and the Box Assembly with Removable Component (BARC) was used in experiment to validate results. The Bayesian optimization package Dragonfly was used to optimize control parameters. Additionally, a moving-average was employed and optimized to improve the measured response feedback for MPCA, reduce the number of averages needed to be taken between control updates, and further improve convergence. The key results of this paper show that the performance of MPCA can be improved by tuning the control parameters and by applying an optimized moving-average. Furthermore, it is demonstrated that convergence can be achieved within 12 drive-frames, which greatly enhances vibration control capability.

42 ENGINEERING↗
DOE OSTI2024

Multiple aspects maintenance ontology-based intelligent maintenance optimization framework for safety-critical systems

Abstract Maintenance optimization is a process for improving the efficiency of maintenance strategies and activities, considering various aspects of the target system and components, such as the probabilities of system failures and the cost of repair and replacement of a failed component. The improvement of maintenance optimization algorithms generally requires information from various data sources. For example, it may require the system risk information derived from risk analysis tools or the residual lifetime of a component from fault prognosis tools. The requirements of data acquisition (DAQ) and aggregation pose new challenges for maintenance management systems (MMSs) that implement and use these maintenance optimization algorithms. This paper proposes a multiple aspects maintenance ontology-based framework to facilitate DAQ from MMSs, online monitoring systems, fault detection and discrimination tools, risk assessment tools, decision-making tools, and component identification tools, and accelerate the implementation and verification of contemporary maintenance optimization models and algorithms. The proposed framework consists of a multi-aspect maintenance ontology with critical information for maintenance optimization and application interfaces for collecting information from various data sources, such as fault prognosis tools, online monitoring tools, risk assessment tools, and decision-making algorithms. In addition, this paper proposes a heuristic method for integrating concepts and properties from other existing ontologies into the proposed framework when the existing ontology is not fully compatible with the ontology under construction. Finally, the paper verifies the proposed ontology framework using a feedwater system designed for nuclear power plants with valves and filters as the components under maintenance.

Diao, Xiaoxu (ORCID:0000000346726352)↗
DOE OSTI2025

Optimization problems governed by systems of PDEs with uncertainties

This paper reviews current theoretical and numerical approaches to optimization problems governed by partial differential equations (PDEs) that depend on random variables or random fields. Such problems arise in many engineering, science, economics and societal decision-making tasks. This paper focuses on problems in which the governing PDEs are parametrized by the random variables/fields, and the decisions are made at the beginning and are not revised once uncertainty is revealed. Examples of such problems are presented to motivate the topic of this paper, and to illustrate the impact of different ways to model uncertainty in the formulations of the optimization problem and their impact on the solution. A linear–quadratic elliptic optimal control problem is used to provide a detailed discussion of the set-up for the risk-neutral optimization problem formulation, study the existence and characterization of its solution, and survey numerical methods for computing it. Different ways to model uncertainty in the PDE-constrained optimization problem are surveyed in an abstract setting, including risk measures, distributionally robust optimization formulations, probabilistic functions and chance constraints, and stochastic orders. Furthermore, approximation-based optimization approaches and stochastic methods for the solution of the large-scale PDE-constrained optimization problems under uncertainty are described. Some possible future research directions are outlined.

Heinkenschloss, Matthias [Rice Univ., Houston, TX ↗
DOE OSTI2022

Solid Electrolytes in the Spotlight

This virtual issue is targeted to students and researchers, and highlights 32 research articles published over the past 5 years (from July 2016 to July 2021) in Chemistry of Materials (CM). Here, the compilation of papers summarizes the latest advances in the field of solid-state electrolytes for lithium (Li)-, sodium (Na)-, and multivalent-ion (not among the 32 articles discussed) all-solid-state batteries (ASSBs), with a focus on inorganic materials and excluding hybrid systems, e.g., polymer/ceramic composites or systems including liquid media. A total of 125 articles reporting exciting experimental and/or theoretical findings on solid electrolytes were considered for this issue. During 2017–2019, there were about 25–30 papers published per year on this topic, but 2020 and 2021 saw a significant increase, with 26 publications in the first half of 2021 alone. Submissions came from many countries around the world, as shown in Figure 1. While most papers were led by research groups located in the United States, Germany and Japan follow closely, and Austria, the United Kingdom, Canada, and China are also well represented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Triple Emission of 5'-( para -R-Phenylene)vinylene-2-(2'-hydroxyphenyl)benzoxazole (PVHBO). Part I: Dual Emission from the Neutral Species

The effects of 5'-(para-R-phenylene)vinylene (PV) substituents on the emission properties of 2-(2'-hydroxyphenyl)benzoxazole (HBO) are analyzed using steady-state and time-resolved absorption and emission spectroscopies in addition to quantum chemical calculations. All members in the series of PVHBOs are capable of excited-state intramolecular proton transfer (ESIPT) with a solvent sensitivity that is typical of a HBO derivative to produce a normal (aka enol) emission and an excited-state tautomer (aka keto) emission. These two emission bands of the neutral dyes are discussed in the current paper. The intermolecular proton transfer, i.e., the deprotonation, of a PVHBO results in the third band of the triple emission, which is described in the succeeding paper. The placement of an electron-withdrawing substituent R on the PVHBO scaffold increases the intensity of the keto emission relative to the enol emission in hydrogen-bonding solvents. The R substituents do not significantly alter the wavelengths of the enol and keto emission bands, which are located in the blue and green regions, respectively, of the visible spectrum. The ultrafast time-resolved spectroscopies and quantum chemical calculations offer explanations on how the R group and the solvent affect the enol and keto emission properties (i.e., wavelength, lifetime, fluorescence quantum yield, and relative ratio of their emissions). Here, the key findings include the following: (1) the emission energies of both enol and keto forms are not sensitively dependent on the R substituent and (2) the solvent-engaged enol excited state is quenched more efficiently as the R substituent becomes more electron-withdrawing. A PVHBO acts as a fusion of HBO and stilbenoid that intersect at the hydroxyphenyl moiety. Depending on the solvent and other environmental conditions, PVHBOs may exhibit the ESIPT property of HBO or the substituent-dependent emission of stilbenoid. This paper and the succeeding article provide a photophysical model of PVHBOs to explain the wavelengths and relative abundances of the three emission bands (enol, keto, and anion) that these compounds are able to produce. Judicial selection of the environmental factors may drive the emission of a PVHBO into the spectral regions of blue, green, and, in a couple of cases, orange or red.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗