Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PYROXENE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Phenocryst fabric in lunar basalt sample 12052 from the Ocean of Storms.

Pyroxene phenocrysts in Apollo 12 sample 12052, a porphyritic basalt, have a weak, planar preferred orientation and a lineation as determined by crystal-elongation measurements and universal-stage measurements in orthogonal thin sections. The structures are probably the result of laminar flow. Numerous vugs and the flow foliation in sample 12052 suggest crystallization as a surface flow or a near-surface sill. Flowage appears to have ceased by the time of crystallization of the variolitic groundmass of the sample. The fabric data suggest a two-stage crystallization of sample 12052.

Greenwood, W. R.↗
NASA NTRS1972

Spectrophotometry /0.3 to 1.1 micron/ of visited and proposed Apollo lunar landing sites.

The study uses information gained by analysis of the spectral properties of lunar samples in the laboratory, and telescope spectra of over 100 lunar areas, to provide information regarding the composition and mineralogy of each proposed lunar landing site. Attention is given to (1) the presence of pyroxenes which cause an absorption band near 0.95 micron in the lunar reflection spectrum, (2) the proportion of crystalline to glassy material present in the soil which is derived from the slope of the reflectivity curve between 0.4 and 0.7 micron and the strength of the 0.95 micron absorption band, and (3) the presence of Ti(3+) ions in the glasses on the lunar surface, which affects the reflection spectrum at blue and ultraviolet wavelengths.

Mccord, T. B.↗
NASA NTRS1972

The moon as a high temperature condensate

The accretion during condensation mechanism is used to explain the differences in composition of the terrestrial planets and the moon. Many of the properties of the moon, including the enrichment in Ca, Al, Ti, U, Th, Ba, Sr and the REE and the depletion in Fe, Rb, K, Na and other volatiles can be understood if the moon represents a high temperature condensate from the solar nebula. Thermodynamic calculations show that Ca, Al and Ti rich compounds condense first in a cooling nebula. The high temperature mineralogy is gehlenite, spinel perovskite, Ca-Al-rich pyroxenes and anorthite. The model is consistent with extensive early melting, shallow melting at 3 A.E. and with presently high speed internal temperatures. It is predicted that the outer 250 km is rich in plagioclase and FeO. The low iron content of the interior in this model raises the interior temperatures estimated from electrical conductivity by some 800 C. The lunar crust is 80 percent gabbroic anorthosite, 20 percent basalt and is about 250-270 km thick. The lunar mantle is probably composed of spinel, merwinite and diopside with a density of 3.4 g/cu cm.

Anderson, D. L.↗
NASA NTRS1972

Mercury - Surface composition from the reflection spectrum.

The reflection spectrum for the integral disk of the planet Mercury was measured and was found to have a constant positive slope from 0.32 to 1.05 micrometers, except for absorption features in the infrared. The reflectivity curve matches closely the curve for the lunar upland and mare regions. Thus, the surface of Mercury is probably covered with a lunar-like soil rich in dark glasses of high iron and titanium content. Pyroxene is probably the dominant mafic mineral.

Mccord, T. B.↗
NASA NTRS1972

Mercury - Interpretation of optical observations.

The spectral reflectivity of Mercury has constant positive slope from 0.32 to 1.05 microns, except for the possibility of an absorption feature in the infrared. The reflectivity curve matches closely the curve for lunar upland and mare regions. Thus, the surface of Mercury is probably covered with lunar-like soil rich in dark glasses of high iron and titanium content. If the absorption band is real, pyroxene is the dominant mafic mineral.

Mccord, T. B.↗
NASA NTRS1972

Electron petrography of Apollo sample 14310.

Thin sections prepared from Apollo sample 14310 have been examined with 100-kV transmission electron microscopy. The sample is composed principally of anorthite and pyroxene. The anorthites fall into two categories. The transitional anorthites that show the characteristic 'c' type diffraction maxima are characterized by very fine antiphase domain structures and some fine twinning. The body-centered anorthites that show no 'c' reflections are characterized by an absence of fine twinning and a less well-defined antiphase domain structure. Although both orthopyroxene and clinopyroxenes are reported in sample 14310, only clinopyroxenes were observed in this study and all show exsolution structures. The augite exsolved in pigeonite commonly is along lamellae parallel to (100), although (001) lamellae are also present. This unusual orientation was verified by diffraction patterns. The pigeonite commonly shows antiphase domains, attributed to stacking errors when the sample inverted from its high-temperature disordered form. In augite as the host phase, the pigeonite lamellae contain very complex structures including antiphase domains.

Smith, D. K.↗
NASA NTRS1972

Distinct subsolidus cooling histories of Apollo 14 basalts.

Study of the distribution of magnesium and ferrous iron over the M1 and M2 positions in pyroxenes from the basaltic rocks 14053 and 14310, aimed at an analysis of the subsolidus cooling history. The results obtained suggest that the subsolidus cooling of the basalt 14310 occurred at a depth of several meters in a coherent body of appreciable size. As for the 14053, the hot debris of which it was a part were deposited after the projection from the Imbrium basin; some smaller fragments, including 14503, cooled very rapidly in the cold Fra Mauro regolith by conduction.

Schurmann, K.↗
NASA NTRS1972

Vapor phase crystallization in Apollo 14 breccia.

The vugs contained in many of the highly recrystallized breccias from Apollo 14 are discussed, along with the well-developed crystals of plagioclase, pyroxene, ilmenite, apatite, whitlockite, iron, nickel-iron, and troilite that extend from the vug walls and bridge open spaces. These crystals are interpreted as having formed by deposition from a hot vapor containing oxides, halides, sulfides, alkali metals, iron and possibly other chemical species. The hot vapor was associated with the thermal metamorphism and subsequent cooling of the Fra Mauro formation after it had been deposited as an ejecta blanket by the Imbrian impact.

Mckay, D. S.↗
NASA NTRS1972

Mineralogy and origin of Fra Mauro fines and breccias.

Textural features, glassy spherule and glassy aggregate contents, and size-frequency distributions of lithic components of the regolith fines indicate that the Fra Mauro regolith of the smooth terrain is a highly reworked accumulation of debris derived primarily by impact comminution of annealed breccias. Analyses of the glassy spherules suggest that mare-derived debris must amount to less than 5% of the regolith, but exotic materials having the composition of the Fra Mauro breccias (highland-like) cannot be recognized. Breccia samples from the Fra Mauro site include (1) regolith breccias derived by lithification of local regolith material, (2) texturally and compositionally unique white rock breccias that may have been derived from ancient ejecta buried beneath the Fra Mauro formation, and (3) annealed breccias that are excavated samples of the Fra Mauro formation. The latter were deposited as heated impact ejecta, probably by avalanches produced by the Imbrian event and were annealed in situ in a thermal regime perhaps equivalent to that responsible for the pyroxene-hornfels facies of metamorphism in terrestrial rocks.

Quaide, W.↗
NASA NTRS1972

Experimental petrology and origin of Fra Mauro rocks and soil.

Results of melting experiments over the pressure range from 0 to 20 kb on Apollo 14 igneous rocks 14310 and 14072, and on comprehensive fines 14259. It is found that low-pressure crystallization of rocks 14310 and 14072 proceeds as predicted from the textural relationships displayed by thin sections of these rocks. The mineralogy and textures of these rocks are the result of near-surface crystallization. The chemical compositions of these lunar samples all show special relationships to multiply saturated liquids in the system anorthite-forsterite-fayalite-silica at low pressure. Partial melting of a lunar crust consisting largely of plagioclase, low-calcium pyroxene, and olivine, followed by crystal fractionation at the lunar surface, is a satisfactory mechanism for the production of the igneous rocks and soil glasses sampled by Apollo 14. The KREEP component of other lunar soils, may have a similar origin.

Walker, D.↗
NASA NTRS1972

Structure of lunar glasses by Raman and soft X-ray spectroscopy.

X-ray spectra and Raman spectra have been measured from individual particles of lunar glasses. Each particle was analyzed separately by electron microprobe. Silicon emission shifts vary between parent rock types and can be interpreted as a range of Si-O distances from 1.612 to 1.637 A. Aluminum emission shifts relate to the amount of 4- and 6-coordinated Al in the glass. Raman spectra show broadened bands. Certain bands recur in many specimens and relate to the main normative minerals for the glass bulk composition, olivine, pyroxene, and anorthite.

Fabel, G. W.↗
NASA NTRS1972

The Apollo 15 X-ray fluorescence experiment.

The prime purpose of the X-ray fluorescence spectrometer carried in the Scientific Instrument Module of the Command-Service Module was to map the lunar surface with respect to its chemical composition. Results are presented for Al, Mg, and Si as Al/Si and Mg/Si ratios for the various features overflow by the spacecraft. The lunar surface measurements involved observations of the intensity and characteristic energy distribution of the secondary or fluorescent X rays produced by the interaction of solar X rays with the lunar surface. The results showed that the highlands and maria are chemically different, with the highlands having considerably more Al and less Mg than the maria. The mare-highland contact is quite sharp and puts a limit on the amount of horizontal transport of material. The X-ray data suggest that the dominant rock type of the lunar highlands is a plagioclase-rich pyroxene bearing rock probably anorthositic gabbro or feldspathic basalt.

Adler, I.↗
NASA NTRS1972

The Washougal meteorite.

Optical study of the Washougal (Wash.), howardite, and determination of the ranges of composition of plagioclase and pyroxenes from measurements of densities and indices of refraction. Notable among many unique xenoliths are a round object whose morphology is that of an armored chondrule; a stratified fragment; and a centimeter-sized dunite xenolith (olivine Fa sub 12.8). The abundances of 27 elements, including all major elements and 15 trace elements are reported. To a first approximation, the composition of Washougal corresponds to a mixture of 51 wt per cent of eucritic material and 49 per cent of a diogenitic component, but excesses of some elements suggest a minor component of chondritic composition.

Jerome, D. Y.↗
NASA NTRS1973

Asteroid spectral reflectivities.

We measured spectral reflectivities (0.3-1.1 micron) for 32 asteroids. There are at least 14 different curve types. Common types are: (a) reddish curves with 10% absorptions near 0.95 micron or beyond 1.0 micron, due to Fe(2+) in minerals such as pyroxenes; (b) flat curves in the visible and near-IR with sharp decreases in the UV and (c) flat curves even into the UV. Several asteroids show probable color variations with rotation, especially 6 Hebe. A sample of 102 asteroids with reliably known colors is derived from the reflectivities and from earlier colorimetry. Several correlations of colors and spectral curve types with orbital and physical parameters are examined: (1) asteroids with large aphelia have flat reflectivities while those with small perihelia are mostly reddish, (2) curve types show evidence for clustering on an a vs e plot, with 0.95 micron bands occuring mainly for Mars-approaching asteroids, (3) no strong correlation exists between color and either proper eccentricity or proper inclination.

Chapman, C. R.↗
NASA NTRS1973

The composition and origin of the moon.

Many of the properties of the moon can be explained by early condensation processes in the solar nebula. Thermodynamic calculations show that Ca-, Al- and Ti-rich compounds condense first in a cooling nebula. The inital high-temperature mineralogy is gehlenite, spinel, perovskite, (Ca-Al)-rich pyroxenes and anorthite. Inclusions in type III carbonaceous chondrites such as the Allende meteorite are composed primarily of these minerals and are highly enriched in trace refractories such as REE relative to carbonaceous chondrites. These inclusions can yield basalt and anorthosite in the proportions required to eliminate the europium anomaly, leaving a residual spinel-melilite interior. A high-(Ca-Al) deep interior does not imply an unacceptable mean density of moment of inertia for the moon. The inferred high-U content of the lunar interior, both from the Allende analogy and the high heat flow, indicates a high-temperature interior. The model is consistent with extensive early melting, shallow melting at 3 AE, and with presently high deep internal temperatures.

Anderson, D. L.↗
NASA NTRS1973

Petrology of some lithic fragments from Luna 20.

Microscopic and electron microprobe studies were made of polished thin sections of part of a 30-mg sample of 250- to 500-micron lunar soil returned by Luna 20 from a point between Mare Fecunditatis and Mare Crisium. Very fine-grained lithic (crystalline) rock fragments, composing about one-fifth of the total sample, have mineralogical compositions equivalent to various types of gabbro, anorthositic gabbro, gabbroic anorthosite, and troctolite, with minor basalt. The textures now observed in these fragments are in large part metamorphic. Twenty-seven electron microprobe analyses of minerals from these fragments are presented, including olivine, plagioclase, pyroxene, spinel, nickel-iron, and a Zr-Ti-REE mineral possibly similar to 'phase B' of Lovering and Wark (1971). Analyses of seven melt inclusions and 28 defocused beam analyses of lithic fragments are also given. Some of the fragments contain 'gas' inclusions which, along with the fine grain size, are believed to indicate final crystallization under low pressure near surface conditions.

Roedder, E.↗
NASA NTRS1973

Basaltic vitrophyre 15597 - An undifferentiated melt sample.

The vitrophyric nature and textural appearance of the Apollo 15 sample 15597, and the unusual compositions of its pigeonite centers and chromites, as well as the extreme chemical zonation of its pyroxenes, give strong evidence that this rock arrived on the lunar surface in an entirely liquid state. It may represent a 'primitive melt,' or at least a precursor from which mare lavas were derived.

Weigand, P. W.↗
NASA NTRS1973

Mechanical erasure of particle tracks - A tool for lunar microstratigraphic chronology.

Mechanical erasure of particle tracks caused by impact deformation is shown to be a common feature of lunar soil grains. Etching of lunar pyroxenes reveals deformation markings that are evidence of prior impact events. The soil microstratigraphic chronology can be derived if it is assumed that the minimum track density in a thin soil layer is commonly found in grains where such erasure was caused by the impact that deposited the soil. With Apollo 12 core samples as examples, the minimum track density found in each layer is used to calculate the longest exposure that layer could have received since it was last disturbed. By summing the upper limits on the exposure times of the different layers, a lower limit on the average deposition rate was estimated to be 0.35 cm/m.y.

Fleischer, R. L.↗