Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASMA SHEATH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Optical Emission of Dusty RF Discharges: Experiment and Simulation

The spectral emission of argon atoms in a dusty radio frequence (RF) discharge has been investigated experimentally and in simulations. It was observed that the spatially and temporally resolved emission of the argon atoms in the dusty discharge was increased compared to the dust-free case during sheath expansion. The corresponding simulations have revealed that the dust trapped in the sheath of the discharge leads to a small, but important, increase of the amount of high-energy electrons that in turn leads to an increased argon emission.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Efficient proton acceleration and focusing by an ultraintense laser interacting with a parabolic double concave target with an extended rear

A new scheme for acceleration and focusing of protons via an improved parabolic double concave target irradiated by an ultraintense laser pulse is proposed. When an intense laser pulse illuminates a concave target, the hot electrons are concentrated on the focal region of the rear cavity and they form a strong space-charge-separation field, which accelerates the protons. For a simple concave target, the proton energy spectrum becomes very broad outside the rear cavity because of transverse divergence of the electromagnetic fields. However, particle-in-cell simulations show that, when the concave target has an extended rear, the hot electrons along the wall surface induce a transverse focusing sheath field, resulting in a clear enhancement of proton focusing, which makes the lower proton energy spread, while, leads to a little reduction of the proton bunch peak energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Sub-microsecond pulsed atmospheric glow discharges with and without dielectric barrier

The discharge characteristics and mechanism of glow discharges in atmospheric pressure helium excited by repetitive voltage pulses with and without dielectric barriers are numerically studied using a one-dimensional self-consistent fluid model. The waveforms of discharge current density show that one discharge event occurs during the voltage pulse with bare electrodes and two distinct discharge events happen at the rising and falling phases of voltage pulse with dielectric barrier electrodes, respectively. The spatial profiles of electron and electric field at the time instant of discharge current peak reveal that the electrons are trapped in the plasma bulk with bare electrodes, while the electrons are accumulated in the region between the sheath and plasma bulk with dielectric barrier electrodes. Furthermore, the spatio-temporal evolution of electron density and mean electron energy clearly demonstrate the dynamics of discharge ignition, especially the temporal evolution of sheath above the instantaneous cathode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A New Faraday Screen For Tore Supra ICRH Antenna

In the framework of the Ion Cyclotron (IC) developments held in Cadarache, the design of a new Faraday Screen (FS) was initiated to replace the aging ones mounted on the 3 Tore Supra (TS) antennas. The new conceptual design proposed is steered by conclusive results of electrical simulation stressing the need to suppress the parallel RF currents flowing on the FS frame to reduce the RF sheaths. Two major modifications are implemented on a TS FS to reduce the j{sub ||} circulation: apertures on the top and bottom closure walls of the antenna radiating box, and cantilevered FS bars (that is, bars not connected to the vertical central septum). This single connection point also eases the FS rod thermal expansion, resulting in less mechanical stresses. In addition, the cantilevered bar design avoids eddy current loops which reduces electromagnetically induced stresses during disruptions. If successful with plasma operation, this RF structure provides a promising new option to simplify the ITER IC Faraday screen design.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Power absorption in electrically asymmetric dual frequency capacitive radio frequency discharges

The symmetry of capacitive radio frequency discharges can be controlled via the electrical asymmetry effect by driving one electrode with a fundamental frequency and its second harmonic. In such electrically asymmetric discharges, the mean ion energies at both electrodes are controlled separately from the ion flux by tuning the phase angle {theta} between the harmonics at fixed voltage amplitudes. Here, the question why the ion flux is nearly independent of {theta} is answered by investigating the power absorbed by the electrons P{sub e} as a function of {theta} and time experimentally, by a particle in cell simulation, and an analytical model. The dynamics of P{sub e} is understood by the model and is found to be strongly affected by the choice of {theta}. However, on time average, P{sub e} is nearly constant, independently of {theta}. Thus, the ion flux remains approximately constant. In addition, it is shown that the absolute value of the individual voltages across the powered and grounded electrode sheath vary linearly with the dc self-bias. However, their sum remains constant. This yields, in combination with the constancy of the ion flux, a constant power absorbed by the ions and, in conclusion, a total power absorption that is independent of {theta}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High-quality MeV protons from laser interaction with umbrellalike cavity target

A scheme for producing high-intensity collimated MeV protons from laser interaction with an umbrellalike (cone cavity with an axial filament stemming from the apex) target back side is investigated by two- and three-dimensional particle-in-cell simulations. The process is based on target-normal sheath acceleration. The characteristics of the proton beam are analyzed and compared to that from the recently proposed cone-shaped back side target. It is found that instead of diverging after first focusing, as in the cone-shaped target, the protons produced from the umbrellalike target are well collimated. The large transverse sheath electric field at TV/m level and the self-generated quasistatic magnetic field at hundreds of megagauss level around the filament play important roles in the collimation of the protons.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of the dense plasma focus for short-pulse applications

The dense plasma focus (DPF) has long been considered a compact source for pulsed neutrons and has traditionally been optimized for the total neutron yield. Here, we describe the efforts to optimize the DPF for short-pulse applications by introducing a reentrant cathode at the end of the coaxial plasma gun. We reduced the resulting neutron pulse widths by an average of 21±921±9% from the traditional long-drift DPF design. Pulse widths and yields achieved from deuterium-tritium fusion at 2 MA are 61.8±30.761.8±30.7 ns FWHM and 1.84±0.49×10121.84±0.49×10 12 neutrons per shot. Simulations were conducted concurrently to elucidate the DPF operation and confirm the role of the reentrant cathode. Furthermore, a hybrid fluid-kinetic particle-in-cell modeling capability demonstrates correct sheath velocities, plasma instabilities, and fusion yield rates. Consistent with previous findings that the DPF is dominated by beam-target fusion from superthermal ions, we estimate that the thermonuclear contribution is at the 1% level.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron flow stability in magnetically insulated vacuum transmission lines.

We evaluate the stability of electron current flow in high-power magnetically insulated transmission lines (MITLs). A detailed model of electron flow in cross-field gaps yields a dispersion relation for electromagnetic (EM) transverse magnetic waves [R. C. Davidson et al., Phys. Fluids 27, 2332 (1984)] which is solved numerically to obtain growth rates for unstable modes in various sheath profiles. These results are compared with two-dimensional (2D) EM particle-in-cell (PIC) simulations of electron flow in high-power MITLs. We find that the macroscopic properties (charge and current densities and self-fields) of the equilibrium profiles observed in the simulations are well represented by the laminar-flow model of Davidson et al. Idealized simulations of sheared flow in electron sheaths yield growth rates for both long (diocotron) and short (magnetron) wavelength instabilities that are in good agreement with the dispersion analysis. We conclude that electron sheaths that evolve self-consistently from space-charged-limited emission of electrons from the cathode in well-resolved 2D EM PIC simulations form stable profiles.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Study of soft X-ray emission during wire array implosion under plasma focus conditions at the PF-3 facility

Results of measurements of soft X-ray emission with photon energies of <1 keV under conditions of a plasma focus (PF) experiment are presented. The experiments were carried out at the world’s largest PF device—the PF-3 Filippov-type facility (I ⩽ 3 MA, T/4 ≈ 15–20 µs, W{sub 0} ⩽ 3 MJ). X-ray emission from both a discharge in pure neon and with a tungsten wire array placed on the axis of the discharge chamber was detected. The wire array imploded under the action of the electric current intercepted from the plasma current sheath of the PF discharge in neon. The measured soft X-ray powers from a conventional PF discharge in gas and a PF discharge in the presence of a wire array were compared for the first time.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Theoretical discussion for electron-density distribution in multicusp ion source

By introducing some ideas of magnetohydrodynamics (MHD) and kinetic theories, some useful solutions for electron-density distribution in the radial direction in multicusp ion source are obtained. Therefore, some conclusions are made in this perspective: 1, the electron-density distributions in a specific region in the sheath are the same with or without magnetic field; 2, the influence of magnetic field on the electron density obeys exponential law, which should take into account the collision term as well if the magnetic field is strong; 3, the result derived from the Boltzmann equation is qualitatively consistent with some given experimental results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High-energy monoenergetic proton bunch from laser interaction with a complex target

Generation of high-energy proton bunch in the interaction of a high-power laser pulse with a complex target consisting of a front horizontal slice adjoining a conventional heavy ion and proton double-layer slab is investigated using two-dimensional particle-in-cell simulation. The laser pulse propagates along both sides of the slice. A large number of hot electrons are generated and accelerated by the surface ponderomotive force, and transported through the double layer, forming a backside sheath field which is considerably stronger and more localized than that produced by the electrons from a simple double layer. As a result, the protons in the proton layer can be accelerated to energies more than three times, and the energy spread halved, that from the simple double layer.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fast magnetosonic waves launched by transient, current sheet reconnection

A model is investigated describing the resistive dissipation of a finite, two-dimensional current sheet subject to suddenly enhanced resistivity. The resistivity rapidly diffuses the current to a distance where it couples to fast magnetosonic modes. The current then propagates away as a sheath moving at the local Alfven speed. A current density peak remains at the X-point producing a steady electric field independent of the resistivity. This transfers flux across the separatrix at a rate consistent with the external wave propagation. The majority of the magnetic energy stored by the initial current sheet is converted into kinetic energy, far from the reconnection site, during the fast mode propagation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Re-appraisal and extension of the Gratton-Vargas two-dimensional analytical snowplow model of plasma focus evolution in the context of contemporary research

Recent resurgence of interest in applications of dense plasma focus and doubts about the conventional view of dense plasma focus as a purely irrotational compressive flow have re-opened questions concerning device optimization. In this context, this paper re-appraises and extends the analytical snowplow model of plasma focus sheath evolution developed by F. Gratton and J. M. Vargas [Energy Storage, Compression and Switching, edited by V. Nardi, H. Sahlin, and W. H. Bostick (Plenum, New York, 1983), Vol. 2, p. 353)] and shows its relevance to contemporary research. The Gratton-Vargas (GV) model enables construction of a special orthogonal coordinate system in which the plasma flow problem can be simplified and a model of sheath structure can be formulated. The Lawrenceville Plasma Physics (LPP) plasma focus facility, which reports neutron yield better than global scaling law, is shown to be operating closer to an optimum operating point of the GV model as compared with PF-1000.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fulfillment of the kinetic Bohm criterion in a quasineutral particle-in-cell model

Quasineutral particle-in-cell models of ions must fulfill the kinetic Bohm criterion, in its inequality form, at the domain boundary in order to match correctly with solutions of the Debye sheaths tied to the walls. The simple, fluid form of the Bohm criterion is shown to be a bad approximation of the exact, kinetic form when the ion velocity distribution function has a significant dispersion and involves different charge numbers. The fulfillment of the Bohm criterion is measured by a weighting algorithm at the boundary, but linear weighting algorithms have difficulties to reproduce the nonlinear behavior around the sheath edge. A surface weighting algorithm with an extended temporal weighting is proposed and shown to behave better than the standard volumetric weighting. Still, this must be supplemented by a forcing algorithm of the kinetic Bohm criterion. This postulates a small potential fall in a supplementary, thin, transition layer. The electron-wall interaction is shown to be of little relevance in the fulfillment of the Bohm criterion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Preplasma effects on the generation of high-energy protons in ultraintense laser interaction with foil targets

It is shown that the intense quasistatic electric and magnetic fields self-generated near the axis of the laser-driven channel in an appropriately profiled preplasma during ultraintense laser interaction with a thin target can create dense relativistic electron bunches. The latter easily penetrate through the target and can greatly enhance the sheath field at the rear, resulting in significant increase in the laser-to-ion energy conversion efficiency and the maximum energy of the target normal sheath accelerated ions. Particle-in-cell simulations show that with a hydrogen targets a proton beam of peak energy ∼38 MeV and energy conversion efficiency ≥6.5% can be produced by a linearly polarized 5 × 10{sup 19} W/cm{sup 2} laser. An analytical model is also proposed and its results agree well with those of the simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Kinetic particle simulation of discharge and wall erosion of a Hall thruster

The primary lifetime limiting factor of Hall thrusters is the wall erosion caused by the ion induced sputtering, which is predominated by dielectric wall sheath and pre-sheath. However, so far only fluid or hybrid simulation models were applied to wall erosion and lifetime studies in which this non-quasi-neutral and non-equilibrium area cannot be treated directly. Thus, in this study, a 2D fully kinetic particle-in-cell model was presented for Hall thruster discharge and lifetime simulation. Because the fully kinetic lifetime simulation was yet to be achieved so far due to the high computational cost, the semi-implicit field solver and the technique of mass ratio manipulation was employed to accelerate the computation. However, other artificial manipulations like permittivity or geometry scaling were not used in order to avoid unrecoverable change of physics. Additionally, a new physics recovering model for the mass ratio was presented for better preservation of electron mobility at the weakly magnetically confined plasma region. The validity of the presented model was examined by various parametric studies, and the thrust performance and wall erosion rate of a laboratory model magnetic layer type Hall thruster was modeled for different operation conditions. The simulation results successfully reproduced the measurement results with typically less than 10% discrepancy without tuning any numerical parameters. It is also shown that the computational cost was reduced to the level that the Hall thruster fully kinetic lifetime simulation is feasible.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effects of laser prepulse on proton generation: active manipulation of the distribution of laser accelerated proton beams

Laser pre-pulse is a major issue in experiments on laser-generation of protons, often limiting the performances of laser sources. In this paper, we show how we can actively use a low intensity prepulse (<10{sup 13} W/cm{sup 2}, ns duration) to manipulate the proton beam direction or spatial energy distribution. The prepulse is focused onto the front surface of a thin foil before the arrival of the high intensity pulse ({approx_equal}10{sup 19} W/cm{sup 2}, ps duration). Under oblique high-intensity irradiation and for low prepulse intensities, the proton beam is directed away from the target normal. Deviation is towards the laser forward direction, with an angle that increases with the level and duration of the ASE pedestal. Also, for a given laser pulse, beam deviation increases with proton energy. The observations are discussed in terms of Target Normal Sheath Acceleration, in combination with a laser-controllable shock wave locally deforming the target surface. Results obtained with an annular intensity distribution of the prepulse show smooth proton beams with a sharp circular boundary at all energies. Potential mechanisms to explain the observations are discussed.

43 PARTICLE ACCELERATORS↗

Advances in target normal sheath acceleration theory

A theoretical model of the Target Normal Sheath Acceleration (TNSA) process, able to go beyond the limits of available descriptions, is developed. It allows to achieve a more satisfactory interpretation of TNSA. The theory, also supported by two dimensional particle-in-cell simulations, elucidates the role played by the main laser and target parameters. Comparison between model predictions and experimental data related to the target thickness dependence of the maximum ion energy is discussed, showing satisfactory agreement. The model can be used as a simple but effective tool to guide the design of future experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗