Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASMA PRODUCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Plasma tubes becoming collimated as a result of magnetohydrodynamic pumping

Collimated magnetized plasma structures are commonly observed on galactic, stellar, and laboratory scales. The Caltech plasma gun produces magnetically driven plasma jets bearing a striking resemblance to astrophysical jets and solar coronal loops by imposing boundary conditions analogous to those plasmas. This paper presents experimental observations of gun-produced plasma jets that support a previously proposed magnetohydrodynamic (MHD) pumping model [P. M. Bellan, Phys. Plasmas 10, 1999 (2003)] as a universal collimation mechanism. For any initially flared, magnetized plasma tube with a finite axial current, the model predicts (i) magnetic pumping of plasma particles from a constricted region into a bulged region and (ii) tube collimation if the flow slows down at the bulged region leading to accumulation of mass and thus concentrating the azimuthal magnetic flux frozen in the mass flow (i.e., increasing the pinch force). Time- and space-resolved spectroscopic measurements of gun-produced plasmas have confirmed the highly dynamic nature of the process leading to a collimated state, namely, (i) suprathermal Alfvenic flow (30-50 km/s), (ii) large density amplification from approx10{sup 17} to approx10{sup 22} m{sup -3} in an Alfvenic time scale (5-10 mus), and (iii) flow slowing down and mass accumulation at the flow front, the place where the tube collimation occurs according to high-speed camera imaging. These observations are consistent with the predictions of the MHD pumping model, and offer valuable insight into the formation mechanism of laboratory, solar, and astrophysical plasma structures.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Chirped pulse shadowgraphy for single shot time resolved plasma expansion measurements

The dynamics of ultrashort laser plasmas demand single shot temporal measurements on fast time scales. We describe a method to record the plasma expansion on picosecond (ps) timescales continuously over hundreds of ps, in single shot. The method uses the chirp of a Ti:sapphire laser as a time-resolved optical diagnostic tool. Using this technique, the evolution of the plasma expansion had been recorded with ps time resolutions, by probing with a chirped laser pulse of 200 ps duration. A peak expansion velocity of 1.8x10{sup 7} cm/s is observed and its evolution in time is obtained for approx300 ps.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Highly efficient acceleration and collimation of high-density plasma using laser-induced cavity pressure

An efficient scheme of acceleration and collimation of dense plasma is proposed and examined. In the scheme, a target placed in a cavity coupled with a guiding channel is irradiated by a laser beam introduced into the cavity through a hole and accelerated along the channel by the pressure of the ablating plasma confined in the cavity. Using 1.315 mum, 0.3 ns laser pulse of energy up to 200 J and a thin CH target, it was shown that the energetic efficiency of acceleration in this scheme is an order of magnitude higher than in the case of conventional ablative acceleration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Heating dynamics and extreme ultraviolet radiation emission of laser-produced Sn plasmas

The impact of 1.064 mum laser absorption depth on the heating and in-band (2% bandwidth) 13.5 nm extreme ultraviolet emissions in Sn plasmas is investigated experimentally and numerically. In-band emission lasting longer than the laser pulse and separation between the laser absorption and in-band emission region are observed. Maximum efficiency is achieved by additional heating of the core of the plasma to allow the optimal temperature to expand to a lower and more optically thin density. This leads to higher temperature plasma that emits less in-band light as compared to CO{sub 2} produced plasma sources for the same application.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

rf power system for thrust measurements of a helicon plasma source

A rf power system has been developed, which allows the use of rf plasma devices in an electric propulsion test facility without excessive noise pollution in thruster diagnostics. Of particular importance are thrust stand measurements, which were previously impossible due to noise. Three major changes were made to the rf power system: first, the cable connection was changed from a balanced transmission line to an unbalanced coaxial line. Second, the rf power cabinet was placed remotely in order to reduce vibration-induced noise in the thrust stand. Finally, a relationship between transmission line length and rf was developed, which allows good transmission of rf power from the matching network to the helicon antenna. The modified system was tested on a thrust measurement stand and showed that rf power has no statistically significant contribution to the thrust stand measurement.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A new large area lanthanum hexaboride plasma source

A new 18x18 cm{sup 2} active area lanthanum hexaboride (LaB{sub 6}) plasma source for use in a dc discharge has been developed at UCLA. The cathode consists of four tiled LaB{sub 6} pieces indirectly heated to electron emission (1750 deg. C) by a graphite heater. A molybdenum mesh anode 33 cm in front of the LaB{sub 6} accelerates the electrons, ionizing a fill gas to create a 20x20 cm{sup 2} nearly square plasma. The source is run in pulsed operation with the anode biased up to +400 V dc with respect to the cathode for up to 100 ms at a 1 Hz repetition rate. Both the cathode and anode ''float'' electrically with respect to the chamber walls. The source is placed in a toroidal chamber 2 m wide and 3 m tall with a major radius of 5 m. Toroidal and vertical magnetic fields confine the current-free plasma which follows the field in a helix. The plasma starts on the bottom of the machine and spirals around it up to four times (120 m) and can be configured to terminate either on the top wall or on the neutral gas itself. The source typically operates with a discharge current up to 250 A in helium making plasmas with T{sub e}<30 eV, T{sub i}<16 eV, and n{sub e}<3x10{sup 13} cm{sup -3} in a background field of 100 G<B{sub o}<320 G, giving a magnetized plasma with 0.1<{beta}<1.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Recombination effects during expansion into vacuum in laser produced Sn plasma

The distance over which the charge state distribution evolves during the expansion of laser produced Sn plasma in vacuum is investigated experimentally. This distance is found to be less than 6 cm with a planar target irradiated by a 1.064 mum laser at 8.3x10{sup 11} W/cm{sup 2} but greater than 60 cm when a 10.6 mum laser at 2.5x10{sup 10} W/cm{sup 2} is used. The difference is attributed to the laser wavelength dependence of the coronal electron density and the subsequent recombination processes during expansion. Important implications to the extreme ultraviolet x-ray source application are discussed specifically.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spectroscopic analysis of temperature and density of Sn plasma produced by a CO{sub 2} laser

The temporal and spatial evolution of electron temperature and electron density from Sn plasma produced by a CO{sub 2} laser has been investigated in vacuum using spectroscopic methods. The plasma parameters were inferred by the Boltzmann plot method from experimentally observed line profiles of singly ionized Sn and Stark broadened profiles. At a laser intensity of 10{sup 10} W/cm{sup 2}, electron temperature and density were measured to be within 1.13 eV to 0.53 eV and 5.3x10{sup 16} cm{sup -3} to 1.4x10{sup 16} cm{sup -3}, respectively, for delay times between 200 ns and 1100 ns, and at distances up to 5 mm along the target normal. The results show the electron temperature and density from Sn plasma produced by a CO{sub 2} laser with wavelength of 10.6 {mu}m to be lower than previously reported results using a 1064 nm laser in a similar parameter regime. The lower temperature in the region far away from the target surface confirms the smaller interaction region for CO{sub 2} laser as compared with that of neodymium-doped yttrium aluminum garnet laser.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Design and characterization of 2.45 GHz electron cyclotron resonance plasma source with magnetron magnetic field configuration for high flux of hyperthermal neutral beam

A 2.45 GHz electron cyclotron resonance (ECR) source with a magnetron magnetic field configuration was developed to meet the demand of a hyperthermal neutral beam (HNB) flux on a substrate of more than 1x10{sup 15} cm{sup -2} s{sup -1} for industrial applications. The parameters of the operating pressure, ion density, electron temperature, and distance between the neutralization plate and the substrate for the HNB source are specified in a theoretical analysis. The electron temperature and the ion density are measured to characterize the ECR HNB source using a Langmuir probe and optical emission spectroscopy. The parameters of the ECR HNB source are in good agreement with the theoretically specified parameters.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

High homogeneity 25 cm low-energy rf ion source with inherent electron compensation

A 25 cm single-grid low-energy rf ion source with inherent electron compensation is described and characterized. Measurements were carried out using Ar and CF{sub 4} filling gas. The dependence of the ion beam current to the target as well as the current partition between the beam fast and slow ions on the rf discharge pressure for both filling gases is discussed. The unique ability of generation of coinciding ion and electron flows is demonstrated and the measured ion and electron energy distribution functions are presented as well. The developed broad ion beam source is able of providing 0.5-5 mA/cm{sup 2} current density in the low ion energy range of 50-250 eV, with possibility of independent current density and energy control. It is shown that complementing the rf plasma source with a profiling electrode allows for CF{sub 4} ion source operation attaining {+-}5% ion beam uniformity over 250 mm in diameter. The presented CF{sub 4} etching test results exhibit the possibility of highly directional anisotropic Si and SiO{sub 2} etching utilizing the developed single grid rf ion source.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Observations of the long distance exploding wire restrike mechanism

An exploding wire restrike mechanism is applied to create plasma paths up to 9 m in length. The mechanism uses enameled copper wires in a 5 to 10 kV/m region of average electric field (AEF). This relatively low AEF restrike mechanism appears to be linked to the formation of plasma beads along the wire's length. Voltage traces, measurement of relative emitted light intensity and photographs are presented at AEFs below, inside and above the identified restrike region.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fast plasma discharge capillary design as a high power throughput soft x-ray emission source

We present the experimental details and results from a low energy but high repetition rate compact plasma capillary source for extreme ultraviolet and soft x-ray research and applications. Two lengths of capillary are mounted in two versions of a closely related design. The discharge operates in 1.6 and 3.2 mm inner diameter alumina capillaries of lengths 21 and 36 mm. The use of water both as dielectric and as coolant simplifies the compact low inductance design with nanosecond discharge periods. The stored electrical energy of the discharge is approximately 0.5 J and is provided by directly charging the capacitor plates from an inexpensive insulated-gate bipolar transistor in 1 {mu}s or less. We present characteristic argon spectra from plasma between 30 and 300 A as well as temporally resolved x-ray energy fluence in discrete bands on axis. The spectra also allow the level of ablated wall material to be gauged and associated with useful capillary lifetime according to the chosen configuration and energy storage. The connection between the electron beams associated with the transient hollow cathode mechanism, soft x-ray output, capillary geometry, and capillary lifetime is reported. The role of these e-beams and the plasma as measured on-axis is discussed. The relation of the electron temperature and the ionization stages observed is discussed in the context of some model results of ionization in a non-Maxwellian plasma.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A compact and continuously driven supersonic plasma and neutral source

A compact and repetitively driven plasma source has been developed by utilizing a magnetized coaxial plasma gun (MCPG) for diagnostics requiring deep penetration of a large amount of neutral flux. The system consists of a MCPG 95mm in length with a DN16 ConFlat connection port and an insulated gate bipolar transistor (IGBT) inverter power unit. The power supply consists of an array of eight IGBT units and is able to switch the discharge on and off at up to 10 kV and 600 A with a maximum repetitive frequency of 10 kHz. Multiple short duration discharge pulses maximize acceleration efficiency of the plasmoid. In the case of a 10 kHz operating frequency, helium-plasmoids in the velocity range of 20 km/s can be achieved.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Comparative and quantitative study of neutral debris emanated from tin plasmas produced by neodymium-doped yttrium-aluminum-garnet and carbon dioxide laser pulses

Amount of neutral debris emanated from extreme ultraviolet light source must be minimized to maximize its lifetime. Emanation of neutral atomic debris was experimentally investigated using laser-induced-fluorescence technique for carbon dioxide (CO{sub 2}, 10.6 {mu}m in wavelength) and Nd-doped yttrium-aluminum-garnet (Nd:YAG, 1.064 {mu}m) lasers irradiated tin foils. Total number of neutral atomic debris from CO{sub 2} laser-irradiated tin foils was 1/100 times smaller than that from Nd:YAG irradiated ones. Competitiveness of CO{sub 2} laser was revealed in terms of debris mitigation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analysis of atomic and ion debris features of laser-produced Sn and Li plasmas

Tin and lithium plasmas emit efficiently in the in-band region (13.5 nm with 2% bandwidth) necessary for extreme ultraviolet (EUV) lithography. We have made a detailed comparison of the atomic and ionic debris, as well as the emission features of Sn and Li plasmas under identical experimental conditions. Planar slabs of pure Sn and Li were irradiated with 1064 nm, 9 ns neodymium-doped yttrium aluminum garnet laser pulses for producing plasmas. A suite of diagnostics were used to analyze the emission and debris features, including optical emission spectroscopy (OES), a Faraday cup, an EUV pinhole camera, the absolute measurement of EUV conversion efficiency (CE), etc. Our results show that Sn plasmas provide a CE nearly twice that of Li. However, the kinetic energies of Sn ions are considerably higher, though with a lower flux. OES studies have showed that the kinetic energies of neutral species are substantially lower compared to that of the charged particle species.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Rare-earth plasma extreme ultraviolet sources at 6.5-6.7 nm

We have demonstrated a laser-produced plasma extreme ultraviolet source operating in the 6.5-6.7 nm region based on rare-earth targets of Gd and Tb coupled with a Mo/B{sub 4}C multilayer mirror. Multiply charged ions produce strong resonance emission lines, which combine to yield an intense unresolved transition array. The spectra of these resonant lines around 6.7 nm (in-band: 6.7 nm {+-}1%) suggest that the in-band emission increases with increased plasma volume by suppressing the plasma hydrodynamic expansion loss at an electron temperature of about 50 eV, resulting in maximized emission.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Two-tracer spectroscopy diagnostics of temperature profile in the conduction layer of a laser-ablated plastic foil

A technique that combines the diagnostics of electron temperature history and the measurements of ablation velocity with two-tracer x-ray spectroscopy has been developed for diagnosing the temperature profiles in the thermal conduction layers of laser-ablated plastic foils. The electron temperature in the plastic ablator was diagnosed using the isoelectronic line ratios of Al Ly{alpha} line to Mg Ly{alpha} line, emitted from a tracer layer of Al/Mg mixture buried under the ablator. The ablation velocity was inferred from the time delay between the onset time of x-ray line emissions from Al and Mg tracer layers buried at two depths in the ablator, respectively. From the measured electron temperatures and ablation velocity, the electron temperature profile in the conduction layer was inferred. The measured temperature profile was compared with the simulated one and reasonable agreement was found.

36 MATERIALS SCIENCE↗