Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHILOSOPHY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

White Cliffs: Operating Experience

The fourteen dish white cliffs solar power station area is remote and subject to extreme environmental conditions, solution of the associated problems required careful and thoughtful attention and the application of resources. Notwithstanding the wide range and harshness of conditions, the difficulties caused by remoteness and the lack of a technological base and the need for relatively rapid demonstration of success, the project has had a very positive outcome. Qualitative and quantitative information and lessons are now available to enable considerable simplifications to be made for a new system, reducing both hardware and operation and maintenance costs. Experience and lessons are presented, particularly in relation to: system performance in various environmental conditions; design philosophies for collectors, the array, control systems, engine and plant; operation and maintenance strategies and cost reducing possibilities. Experience so far gives encouragement for the future of such paraboloidal dish systems in appropriate areas.

Kaneff, S.↗

The Base Engine for Solar Stirling Power

A new concept in Stirling engine technology is embodied in the base engine now being developed at Stirling Thermal Motors, Inc. This is a versatile energy conversion unit suitable for many different applications and heat sources. The base engine, rated 40 kW at 2800 RPM, is a four-cylinder, double-acting variable displacement Stirling engine with pressurized crankcase and rotating shaft seal. Remote-heating technology is incorporated with a stacked-heat-exchanger configuration and a liquid metal heat pipe connected to a distinctly separate combustor or other heat source. High efficiency over a wide range of operating conditions, long life, low manufacturing cost and low material cost are specifically emphasized. The base engine, its design philosophy and approach, its projected performance, and some of its more attractive applications are described.

Meijer, R. J.↗

Electrochemical storage

The source of the problem within the individual single cell which is related to the stochastic properties of cell populations and to the actual electrochemistry and chemistry taking place is described. The complications which arise in multicell batteries to show how different electrochemistries might alleviate or accentuate these problems is described. The concept of the electrochemical system is introduced to show how certain shortcomings of the single cell/battery string concept can be circumvented. Some of these electrochemical systems permit performance characteristics that are impossible by using conventional battery design philosophies. Projections for energy density and performance characteristics of the concepts are addressed.

Thaller, L. H.↗

Photovoltaics: The endless spring

An overview of the developments in the photovoltaic field over the past decade or two is presented. Accomplishments in the terrestrial field are reviewed along with projections and challenges toward meeting cost goals. The contrasts and commonality of space and terrestrial photovoltaics are presented. Finally, a strategic philosophy of photovoltaics research highlighting critical factors, appropriate directions, emerging opportunities, and challenges of the future is given.

Brandhorst, H. W., Jr.↗

Automotive Stirling engine development program

Activities performed on Mod I engine testing and test results, testing of the Mod I engine in the United States, Mod I engine characterization and analyses, Mod I Transient Test Bed fuel economy, upgraded Mod I performance and testing, Stirling engine reference engine manufacturing and reduced size studied, components and subsystems, and the study and test of low cost casting alloys are summarized. The overall program philosophy is outlined, and data and results are presented.

Nightingale, N.↗

Qualification testing for a central station

Qualification testing for a Central Station Photovoltaic (PV) Facility depends to a great extent on the system design, (fixed versus tracking), and the level of data acquisition/control which is incorporated into the system. The basic elements which require qualification tests include: dc power production/collection; tracker conversion systems; ac utility interface; system level control; and data acquisition/reporting. The qualification tests from the Lungo (ARCO) 1 MW Facility which were completed in January 1983 are discussed. The philosophy and many of the procedures are applicable to any central station PV facility.

Forrester, D. L.↗

Space Shuttle Orbiter onboard rendezvous navigation

Much of the work that the Space Shuttle will perform requires a capability to rendezvous with other orbiting objects. The formulation and design philosophy behind the Space Shuttle Orbiter rendezvous navigation system are the subjects of this paper. The current rendezvous navigation design incorporates a Kalman filter to estimate the relative position and velocity. The filter is augmented with state elements for the estimation of colored measurement noise and acceleration modeling errors. Several measurement types are available to the filter: a manual optical sighting device, an automatic optical tracking instrument, and a rendezvous radar which provides range and range rate measurements as well as the line of sight direction. The filter also includes a technique for detecting highly improbable measurements and excluding them from Kalman processing.

Little, M. J.↗

Concepts used in the preparation of the document - Space and planetary environment criteria guidelines for use in space vehicle development 1982 revision

The NASA/Marshall Space Flight Center has developed a series of documents concerning space and planetary environments for use in the formulation of aerospace vehicle and spacecraft design criteria. For the earth above 90km altitude, and for the moon, planets, and other bodies in the Solar System; information is provided in disciplinary area of importance to the spacecraft designer such as planetary geology and morphology, atmospheric and ionospheric structures, radiation, particles, geomagnetic fields, astrodynamic constants, and meteoroids. This paper presents the philosophy used in the preparation of the current (1982) version of the document. Specific topics will be discussed in relation to their significance for aerospace vehicle and spacecraft development and mission analysis.

Davis, M. H.↗

New component development for multi-100 kW low-cost solar array applications

Studies of the cost and performance of flexible arrays have shown that the most dramatic reductions in the $/Watt figure of merit are achieved by increasing performance. An examination of those properties that contribute to array performance indicated areas where radical changes in current design practice and philosophy would result in significant cost and performance impacts. To take advantage of the predicted cost reductions, modules were fabricated and tested that had ultra-thin superstrates as a load carrying member and large area dielectric wraparound (DWA), gridded back surface and copper contacted solar cells.

Pack, G. J.↗

Computers in the cockpit - But what about the pilots?

The advent of the microprocessor has made it possible to design and implement small special purpose digital computers for the flightdeck of an aircraft. However, by the end of the 1970s, many in aviation and government were concerned about certain safety implications of developments related to automation which had occurred. As a result of these concerns, NASA was directed to examine the human factors of automation. A field investigation concerning the arising questions was conducted, taking into account the introduction of the Dash 80 airliner in 1980. Attention is given to the design philosophy of the aircraft, the study methodology, and preliminary results of the study, which are based on analysis of the first wave of questionnaire data and interviews. Almost all pilots, and check captains as well, expressed the view that the first 50 to 100 hours in the -80 were difficult. The reasons for these difficulties were related to cockpit automation and, in addition, to the fact that the new aircraft was more powerful than the older models to which they were accustomed.

Wiener, E. L.↗

Automated distribution system management for multichannel space power systems

A NASA sponsored study of space power distribution system technology is in progress to develop an autonomously managed power system (AMPS) for large space power platforms. The multichannel, multikilowatt, utility-type power subsystem proposed presents new survivability requirements and increased subsystem complexity. The computer controls under development for the power management system must optimize the power subsystem performance and minimize the life cycle cost of the platform. A distribution system management philosophy has been formulated which incorporates these constraints. Its implementation using a TI9900 microprocessor and FORTH as the programming language is presented. The approach offers a novel solution to the perplexing problem of determining the optimal combination of loads which should be connected to each power channel for a versatile electrical distribution concept.

Fleck, G. W.↗

Nuclear electric propulsion (NEP) spacecraft configuration study

The NEP spacecraft design is for the 100 kWe SP-100 nuclear reactor thermoelectric power supply. Thermoelectric conversion, one of several conversion options being considered for the SP-100, is discussed. Whereas many of the earlier NEP spacecraft designs have been based on highly integrated power and thruster subsystems and have resulted in subsystem requirements that depended largely on the design mission, the SP-100 nuclear power system is a general-purpose power supply. The configuration design must be compatible with this power subsystem design philosophy. The study also detects power and propulsion subsystem integration issues and related technology requirements. It is noted that the new NEP spacecraft design satisfies the most important subsystem integration requirements at the expense of some increase in vehicle inert mass relative to that used in previous studies.

Garrison, P. W.↗

An application of distributed processing - In the TDRSS ground communication fault isolation and monitoring system

A computer interface has been designed for the Fault Isolation and Monitoring System, a system providing qualitative and quantitative assessment of the communications between the Tracking and Data Relay Satellite System Ground Segment and NASA's Network Control Center. The functional requirements for the interface and the design philosophy are discussed, as are the methods and protocol used to implement the operator support software required to configure the monitoring system and to display and report the results of the analysis. The system relies on the use of intelligent terminals, with the human interface removed from the host computer.

Waddell, R. L., Jr.↗

Cumulus role in tropical circulations

The present investigation is concerned with the effects of cumulus clouds upon their surroundings, and the interaction of the cumulus scale of motion with the larger scales of motion in the tropics. Charney and Eliassen (1964) have conducted a study of the growth of the hurricane depression and proposed the CISK (Conditional Instability of the Second Kind) mechanism. The CISK concept was used in several of the pioneering models of hurricanes and tropical disturbances. Since the 1960's, the CISK concept has been generalized and extended. However, the feedback between convection and the large-scale flow is still positive. In the present investigation the philosophy is extended to a negative feedback which contributes to the stability (mainly in direction) of the trade winds. Attention is given to the classical Ekman layer and early CISK, cumulus momentum transports, the role of cumuli in the trade-wind moisture and heat budgets, the trade wind model, and the equatorial trough and hot tower hypothesis.

Simpson, J.↗

Technologies for space station autonomy

This report presents an informal survey of experts in the field of spacecraft automation, with recommendations for which technologies should be given the greatest development attention for implementation on the initial 1990's NASA Space Station. The recommendations implemented an autonomy philosophy that was developed by the Concept Development Group's Autonomy Working Group during 1983. They were based on assessments of the technologies' likely maturity by 1987, and of their impact on recurring costs, non-recurring costs, and productivity. The three technology areas recommended for programmatic emphasis were: (1) artificial intelligence expert (knowledge based) systems and processors; (2) fault tolerant computing; and (3) high order (procedure oriented) computer languages. This report also describes other elements required for Station autonomy, including technologies for later implementation, system evolvability, and management attitudes and goals. The cost impact of various technologies is treated qualitatively, and some cases in which both the recurring and nonrecurring costs might be reduced while the crew productivity is increased, are also considered. Strong programmatic emphasis on life cycle cost and productivity is recommended.

Staehle, R. L.↗

Electrical System Technology Working Group (WG) Report

The technology needs for space power systems (military, public, commercial) were assessed for the period 1995 to 2005 in the area of power management and distribution, components, circuits, subsystems, controls and autonomy, modeling and simulation. There was general agreement that the military requirements for pulse power would be the dominant factor in the growth of power systems. However, the growth of conventional power to the 100 to 250kw range would be in the public sector, with low Earth orbit needs being the driver toward large 100kw systems. An overall philosophy for large power system development is also described.

Silverman, S.↗

Spaceborne receivers: Basic principles

The underlying principles of operation of microwave receivers for space observations of planetary surfaces were examined. The design philosophy of the receiver as it is applied to operate functionally as an efficient receiving system, the principle of operation of the key components of the receiver, and the important differences among receiver types are explained. The operating performance and the sensitivity expectations for both the modulated and total power receiver configurations are outlined. The expressions are derived from first principles and are developed through the important intermediate stages to form practicle and easily applied equations. The transfer of thermodynamic energy from point to point within the receiver is illustrated. The language of microwave receivers is applied statistics.

Stacey, J. M.↗

Challenges in the development of the shuttle extravehicular mobility unit

The development of the Shuttle extravehicular mobility unit (EMU) has required significant technology advances in the design of the astronaut life support system and space-suit assembly. The life support system and space-suit assemblies are integrated into a single system and optimized for the primary function of supporting astronaut extravehicular operations. Rather than accommodating a limited, male-only astronaut population, the EMU must satisfy size requirements for both males and females with a minimum of sized parts. In addition, the Shuttle EMU has been designed to implement Space Shuttle Program philosophy of long operating life and mission reuse capability to minimize program lifetime cost. The advancement in life support system and space-suit technology achieved by the development of the Shuttle extravehicular mobility unit (EMU) is illustrated by comparison with the requirements for and the design features of the Apollo EMU.

Mcmann, H. J.↗