SEARCH · Engineering Papers

Results for “Navier”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

All sources NASA NTRS DOE OSTI

NASA NTRS1988

Navier Stokes computation of the flow field over delta wings with spanwise leading edge blowing

The concept of spanwise leading edge blowing, a means of controlling the position and strength of leading edge vortices, is analyzed by numerical solutions of the three-dimensional Thin-Layer Navier Stokes equations. The leading edge jet is simulated by defining a permeable boundary, corresponding to the jet slot, where suitable boundary conditions are implemented. Numerical results agree favorably with experimental measurements. It is found that the use of spanwise leading edge blowing not only magnifies the size and strength of the leading edge vortices, but also moves the vortex cores outboard and upward. As a result, the increase in lift comes primarily from the greater nonlinear vortex lift. The presence of the leading edge jet stream displaces the flow outboard, thereby increasing the effective aspect ratio of the delta wing. However, blowing causes earlier vortex breakdown, thus decreasing the stall angle.

Yeh, David T.↗

NASA NTRS1988

Computational validation of a parabolized Navier-Stokes solver on a sharp-nose cone at hypersonic speeds

Perfect gas computational results from a newly-developed upwind, parabolized Navier-Stokes (PNS) solver are compared with an existing set of experimental laminar results for a 10-deg half-angle circular cone at freestream Mach number of 7.95. Comparisons were performed with surface pressure and heat transfer data, as well as with flowfield pitot measurements. The PNS code predicted the surface quantities accurately up through 20-deg angle-of-attack, including crossflow separation, and correctly defined the location of the bow shock and the edge of the boundary layer. The importance of cell Reynolds number, grid density, and thermal boundary conditions to the accurate prediction of the flowfield are examined through numerical emamples.

Huebner, Lawrence D.↗

NASA NTRS1988

An upwind differencing scheme for the time-accurate incompressible Navier-Stokes equations

The two-dimensional incompressible Navier-Stokes equations are solved in a time-accurate manner in using the method of pseudocompressibility. Using this method, subiterations in pseudotime are required to satisfy the continuity equation at each time step. An upwind differencing scheme based on flux-difference splitting is used to compute the convective terms. The upwind differencing is biased based on the sign of the local eigenvalue of the Jacobian matrix. Third-order or fifth-order spatial accuracy is maintained throughout the interior grid points. The equations are solved using an implicit line-relaxation scheme. This solution scheme is stable and is capable of running at large time steps in pseudotime, leading to fast convergence for each physical time step. A variety of computed results are presented to validate the present scheme. Results for the flow over an oscillating plate are compared with the exact analytic solution, good agreement is seen. Excellent comparison is obtained between the computed solution and the analytical results for inviscid channel flow with an oscillating back pressure. Flow solutions over a circular cylinder with vortex shedding are also presented. Finally, the flow past an airfoil at -90 deg angle-of-attack is also computed.

Rogers, Stuart E.↗

NASA NTRS1988

CSCM Navier-Stokes thermal/aerodynamic analysis of hypersonic nozzle flows with slot injection and wall cooling

The Conservative Supra-Characteristic Method (CSCM) Navier-Stokes solver is applied to ascertain the problems inherent in the design of a nominal Mach 14 nozzle for NASA-Ames' 3.5-ft Hypersonic Wind Tunnel; attention is given to the effects of boundary layer cooling systems on the aerodynamic redesign of the nozzle throat region. Complete nozzle flowfields are calculated with and without slot injection of either hot or cold fluid into the boundary layer just upstream of the throat, as well as with alternatively adiabatic and cold walls. The CSCM method is capable of resolving subtle differences in the flows.

Codding, William H.↗

NASA NTRS1988

Navier-Stokes computation of flow around a round-edged double-delta wing

Computations of three-dimensional vortical flows over a thin round-edged double-delta wing with an aspect ratio of 2.05 are performed using an implicit upwind-relaxation finite-difference scheme. The effects of grid and angle of attack on the Navier-Stokes computations are studied. Coarse-grid calculations can not predict the detailed structures of the vortical flowfields for lack of grid resolution. On the contrary, fine-grid computations show that key features of vortex formation, interaction, and breakdown are simulated. Furthermore, computed lift coefficients and spanswise surface static pressure distributions are in good agreement with the experimental data up to alpha = 25 deg.

Hsu, C.-H.↗

NASA NTRS1988

An upwind parabolized Navier-Stokes code for chemically reacting flows

A new upwind, parabolized Navier-Stokes (PNS) code has been developed to compute the hypersonic, viscous, chemically reacting flow around two-dimensional or axisymmetric bodies. The new code is an extension of the upwind (perfect gas) PNS code of Lawrence et al. (1986). The upwind algorithm is based on Roe's flux-difference splitting scheme which has been modified to account for real gas effects. The algorithm solves the gas dynamic and species continuity equations in a 'loosely' coupled manner. The new code has been validated by computing the laminar flow (at free stream Mach number 25) of chemically reacting air over a wedge and a cone. The results of these computations are compared with the results from a centrally-differenced, fully coupled, nonequilibrium PNS code. The agreement is excellent, except in the vicinity of the shock wave where the present code exhibits superior shock capturing capabilities.

Tannehill, John C.↗

NASA NTRS1988

Navier-Stokes simulation of 3-D hypersonic equilibrium air flow

A computationally efficient three-dimensional conservative supracharacteristic Navier-Stokes method has been extended to simulate complex external chemically reacting flows of hypersonic reentry vehicles at angle-of-attack. Numerical simulation results of the flow around a sphere-cone-cone-flare reentry vehicle at 10 deg angle-of-attack are presented, in addition to the results of a well-validated two-dimensional code with which the 0-deg axisymmetric flow has been computed. A method for obtaining compositions of species in equilibrium ionized air is proposed.

Nagaraj, N.↗

NASA NTRS1988

Navier-Stokes structure of merged layer flow on the spherical nose of a space vehicle

Hypersonic merged layer flow on the forepart of a spherical surface of a space vehicle has been investigated on the basis of the full steady-state Navier-Stokes equations using slip and temperature jump boundary conditions at the surface and free-stream conditions far from the surface. The shockwave-like structure was determined as part of the computations. Using an equivalent body concept, computations were carried out under conditions that the Aeroassist Flight Experiment (AFE) Vehicle would encounter at 15 and 20 seconds in its flight path. Emphasis was placed on understanding the basic nature of the flow structure under low density conditions. Particular attention was paid to the understanding of the structure of the outer shockwave-like region as the fluid expands around the sphere. Plots were drawn for flow profiles and surface characteristics to understand the role of dissipation processes in the merged layer of the spherical nose of the vehicle.

Jain, A. C.↗

NASA NTRS1988

An implicit Navier-Stokes analysis of turbine rotor-stator interaction

An implicit Navier-Stokes analysis using a single deforming mesh has been developed for the unsteady rotor-stator interaction problem. The technique has been used to simulate the flow through a turbine stator-rotor stage. Periodic two-dimensional solutions have been obtained using 1000 time steps per cycle without iteration at each time step. Computed surface pressure distributions compare favorably with experimental data available for this configuration.

Gibeling, Howard J.↗

NASA NTRS1988

A block space-marching method for the Navier-Stokes equations

A solution procedure is presented for predominantly supersonic viscous flows. The procedure approximately solves the Navier-Stokes equations by marching blocks of grid points in the streamwise direction and solving the fully elliptic equations within each block. In this manner elliptic effects of limited streamwise extent may be accurately calculated. Results are presented for calculations of a Mach 2 laminar flat-plate shock/boundary-layer interaction, and for a Mach 10 hypervelocity interceptor.

Imlay, Scott T.↗

NASA NTRS1989

Numerical Solution Of Navier-Stokes Equations

Three-dimensional, incompressible flow simulated on computer. Report discusses mathematical basis of IN3SD computer code and application of code to several test problems. Relies heavily on use of pseudocompressibility to solve numerically three-dimensional Navier-Stokes equations of viscous, incompressible flow. With further study and some modification, valuable computational tool for solution of engineering problems in fluid dynamics.

Rogers, Stuart E.↗

NASA NTRS1989

Navier-Stokes Calculations With Deforming Grid

Scheme for numerical simulation of transonic, compressible, viscous flow about two-dimensional cascade of oscillating rigid airfoils involves finite-difference solution of Navier-Stokes equations on coordinate grid deforming with motions of airfoils. Contributes to understanding of flows around advanced turboprop airfoil sections. Cascade represented by periodic grid conforming to airfoils and to outer boundaries. Oscillation of airfoil represented by deformation of grid. Applications of deforming-grid technique includes turbomachinery and aeroelastic modeling of nonrigid airfoils.

Huff, Dennis L.↗

NASA NTRS1989

Upwind Swirl Coupling In Navier-Stokes Calculations

Convergence in axisymmetric flows speeded. Improved treatment devised for swirl-coupling source terms in finite-difference Navier-Stokes calculations of axisymmetric flow. Essence of improvement to treat radial- and swirl-velocity source terms in implicit manner wherever possible. Results in faster convergence and in convergence in some cases in which explicit treatment does not yield convergence at all.

Williams, Morgan↗

NASA NTRS1988

Numerical investigation of a jet in ground effect using the fortified Navier-Stokes scheme

One of the flows inherent in VSTOL operations, the jet in ground effect with a crossflow, is studied using the Fortified Navier-Stokes (FNS) scheme. Through comparison of the simulation results and the experimental data, and through the variation of the flow parameters (in the simulation) a number of interesting characteristics of the flow have been observed. For example, it appears that the forward penetration of the ground vortex is a strong inverse function of the level of mixing in the ground vortex. Also, an effort has been made to isolate issues which require additional work in order to improve the numerical simulation of the jet in ground effect flow. The FNS approach simplifies the simulation of a single jet in ground effect, but it will be even more effective in applications to more complex topologies.

Vandalsem, William R.↗

NASA NTRS1989

Navier-Stokes calculations of transonic flows past cavities

A computational investigation of subsonic and transonic flows past 3-D deep transitional cavities is presented. Computational simulations of these self-induced oscillatory flows were generated through time-accurate solutions of the Reynolds averaged full Navier-Stokes equations, using the explicit MacCormack scheme. The Reynolds stresses were included through the Baldwin-Lomax algebraic turbulence model with certain modifications. Two cases were computed to demonstrate the capability of the numerical scheme in modeling the complex 3-D flow features inside a cavity. The results from an experimental investigation were used not only to benchmark the computations, but also to widen the database used for the discussions and conclusions. The computational results include instantaneous and time averaged flow properties everywhere in the computational zone. Time series analyses were performed for the instantaneous pressure values on the cavity floor. The features of deep and transitional cavity flows, and the effect of the sidewall on the cavity flow flowfield are illustrated through computational graphics.

Baysal, Oktay↗

NASA NTRS1988

Propulsive-jet flow field analysis using the three-dimensional Navier-Stokes equations

A three-dimensional Navier-Stokes code has been applied to the analysis of flow fields containing propulsive jets. Specifically, the application was made to a flow field containing a supersonic jet injected at an angle of 90 degrees to a subsonic free stream. Although wind tunnel data were available, the computational results were not readily comparable to the experimental data because of significant differences between the two plume trajectories. Reasons for the differences are suggested in the report and include: (1) incomplete convergence, (2) inadequate grid resolution in the high gradient regions, and (3) use of a low-order turbulence closure model.

Reed, C. L.↗

NASA NTRS1988

Parametric study of grid size, time step and turbulence modeling on Navier-Stokes computations over airfoils

An upwind-biased implicit approximate factorization algorithm is applied to several steady and unsteady turbulent flows. The thin layer form of the compressible Navier-Stokes equation is used. Both the flux vector splitting and flux difference splitting methods are used to determine fluxes, and the results are compared. Flux difference splitting predicts results more accurately than flux vector splitting on a given mesh size, but, in its present implementation, is more severely limited by the maximum CFL number for unsteady time accurate flows. Physical aspects of the computations are also examined. An equilibrium turbulent boundary layer model computes generally better steady and unsteady results than a nonequilibrium model when there is little to no boundary layer separation. Conversely, when a significant region of separation exists, the nonequilibrium model performs in better agreement with experiment.

Rumsey, Christopher L.↗

NASA NTRS1988

A comparative study and validation of upwind and central-difference Navier-Stokes codes for high-speed flows

A comparative study was made using 4 different computer codes for solving the compressible Navier-Stokes equations. Three different test problems were used, each of which has features typical of high speed internal flow problems of practical importance in the design and analysis of propulsion systems for advanced hypersonic vehicles. These problems are the supersonic flow between two walls, one of which contains a 10 deg compression ramp, the flow through a hypersonic inlet, and the flow in a 3-D corner formed by the intersection of two symmetric wedges. Three of the computer codes use similar recently developed implicit upwind differencing technology, while the fourth uses a well established explicit method. The computed results were compared with experimental data where available.

Rudy, David H.↗