Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Molten”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

The effect of interfacial phenomena on gas solubility measurements in molten salts

The behavior of fission gases in molten fuel salt reactors governs activity transport from the reactor and can also affect the performance of the reactor itself. The gas solubility can be described thermodynamically by Henry’s law. However, the coupling of the condensed and gas phases depends on the interfacial area, which is difficult to measure or even to estimate. Surfaces of materials in the reactor will include disperse phases in the salt and porosity within the structural materials, covering a range of compositions and sizes. These attributes can affect measurements of fundamental properties such as gas solubility. Methods to obtain gas solubility, surface tension, interfacial energies, and bubble gas transport are reviewed. Recent data from manometric experiments are interpreted based on xenon sorption onto salt-wetted quartz.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

Molten Chloride Reactor Experiment

MCRE will be the first fast spectrum, molten chloride reactor in operation. Small critical experiment to provide data for future reactors. - Collaboration between Southern Company Services, TerraPower, and Idaho National Laboratory (INL), as well as other partners. - Expected to be built and operated at the LOTUS testbed (ZPPR). - Authorized by the U.S. Department of Energy. - Technology development of salt synthesis.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2023

Molten Salts-Driven Discovery of a Polar Mixed-Anion 3D Framework at the Nanoscale: Zn 4 Si 2 O 7 Cl 2 , Charge Transport and Photoelectrocatalytic Water Splitting

Mixed-anion compounds widen the chemical space of attainable materials compared to single anionic compounds, but the exploration of their structural diversity is limited by common synthetic paths. Especially, oxychlorides rely mainly on layered structures, which suffer from low stability during photo(electro)catalytic processes. Herein we report a strategy to design a new polar 3D tetrahedral framework with composition Zn 4 Si 2 O 7 Cl 2 . We use a molten salt medium to enable low temperature crystallization of nanowires of this new compound, by relying on tetrahedral building units present in the melt to build the connectivity of the oxychloride. These units are combined with silicon-based connectors from a non-oxidic Zintl phase to enable precise tuning of the oxygen content. This structure brings high chemical and thermal stability, as well as strongly anisotropic hole mobility along the polar axis. These features, associated with the ability to adjust the transport properties by doping, enable to tune water splitting properties for photoelectrocatalytic H 2 evolution and water oxidation. This work then paves the way to a new family of mixed-anion solids

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Reciprocal Ternary Molten Salts Enable the Direct Upcycling of Spent Lithium‐Nickel‐Manganese‐Cobalt Oxide (NMC) Mixtures to Make NMC 622

Cathode active material is the most valuable component of spent lithium‐ion batteries, accounting for ≈30% of their overall value. Direct recycling of cathode materials involves recovering, regenerating, and reusing them without breaking down their chemical structure. This approach maximizes the added value of the cathode compound and reduces manufacturing costs by avoiding the need for virgin material production. However, one key challenge in scaling direct recycling from lab to industry is the requirement for highly purified cathode materials, contrasting with the low purity of black mass generated from battery shredding. No efficient separation process currently exists to isolate different lithium‐nickel‐manganese‐cobalt oxides (NMCs) from each other. Thus, direct recycling technologies that can operate with mixtures of multiple NMC stoichiometries will be best‐suited for industrial adoption. This study explores the direct recycling of NMC mixtures into NMC 622 using a “reciprocal ternary molten salts (RTMS)” system. Ionothermal relithiation and upcycling within the RTMS system successfully restore the layered structure, lithium content, and electrochemical performance of degraded NMCs, yielding results comparable to pristine NMC 622 (P‐NMC 622).

25 ENERGY STORAGE↗
DOE OSTI2026

Quantifying Uncertainties in Heat Capacity Measurements of Molten Salts Determined Using Differential Scanning Calorimetry

Uncertainty in specific heat capacity values of a molten salt determined by using differential scanning calorimetry (DSC) was assessed based on the precision of replicate measurements of heat flows used in the calculation and effects of corrections that are commonly made to heat flow measurements. The ratio method of determining heat capacity was applied using the results of replicate heat flow measurements made with two empty cells, a sapphire reference material, and three samples of a doped NaCl-UCl 3 salt mixture. Replicate measurements with empty cells were used to quantify the effects of system instabilities and sensitivities on the measured heat flows of sapphire and salt. The combined effects of uncertainties in individual heat flow measurements made with blank cells using this system were quantified to be 2.6 μV based on isothermal holds before and after the scan, with cell placement adding the greatest uncertainty. This value was used as the tolerance for accepting background-corrected heat flows measured with sapphire and salt to calculate the specific heat capacity. The acceptable heat flows measured for sapphire and salt over the temperature range of 540 to 725 °C resulted in calculated specific heat capacity values ranging from 0.53 to 0.91 J g −1 K −1 with an overall average value of 0.70 J g −1 K −1 and an uncertainty of 0.22 J g −1 K −1 at the 99 % confidence level. The combined uncertainty in the specific heat capacity masked detection of any effect of temperature or salt composition that occurred.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Steady-state radiochemical transport model of the molten salt reactor experiment

A radiochemical transport model of the Molten Salt Reactor Experiment (MSRE) was formulated based on the material derivative featuring system level 1-D flow providing spatial dependence accounting for multiple phenomena including radioactive decay, chemical removal, and fuel depletion across custom volume regions. Further, the steady-state version, which is based on a system of ODE's, can be solved efficiently and is useful for sensitivity studies utilizing Monte Carlo sampling. Accounting for multiple phenomena in a fully coupled model is necessary to understand the complexities of transport and distribution of radionuclides throughout the primary loop of a flowing fuel reactor.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2022

Radioxenon signatures of molten salt reactors

Developments of molten salt reactor (MSR) technologies are making rapid progress across the globe. These reactor designs involve properly controlling radionuclides through off-gas systems. This work examines radioxenon emissions and assesses treaty detection technology to be used for monitoring. This work also includes a sensitivity study with ORIGEN on the nuclear forensic signals possible from a MSR. Multiple Isotope Ratio Comparison (MIRC) plots are used to compare the ratios of radioxenon isotopes in an MSR to a highly enriched uranium (HEU) reactor. Finally, the results show that MSR emissions may significantly overlap with signals produced in a HEU reactor and that changing reactor operations or retaining emissions in an off-gas system can significantly shift the radioxenon signature away from the HEU pulse.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

Experimental determination of the electrochemical properties of bismuth chloride in eutectic LiCl–KCl and LiCl–KCl–CaCl 2 molten salts

Bismuth has been investigated as a potential liquid electrode for molten salt electrorefining, but the electrochemical behavior of Bi 3+ /Bi redox couple has received scant attention in LiCl–KCl and LiCl–KCl–CaCl 2 eutectics. Electroanalytical techniques were used to determine properties of Bi 3+ /Bi. Diffusivities of 6.71 and 8.93 × 10 –6 cm 2 s –1 and standard apparent potentials of 0.1166 and 0.1187 V versus Ag/AgCl (4.75 mol%) were recommended for BiCl 3 in LiCl–KCl and LiCl–KCl–CaCl 2 eutectics, respectively, at 680 ± 3.1 K. The ICP-MS analysis of BiCl 3 content limited the accuracy of the results. Furthermore, the reliability of the results improved with a more thorough drying procedure for CaCl 2 .

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Salt mass determination by 22 Na-based radioactive tracer dilution of a highly radioactive molten salt system for pyroprocessing spent oxide nuclear fuels

To demonstrate the feasibility of the 22 Na-based radioactive tracer dilution (RTD) for determining the total salt mass in a 60-kg oxide reduction (OR) system at Idaho National Laboratory (INL) for pyroprocessing spent oxide nuclear fuels, a LiCl- 22 NaCl tracer salt was prepared and spiked to the OR vessel, and salt samples were analyzed by gamma spectroscopy. Due to the high radioactivity (around 10 mCi/g) of the OR salt, mainly from 137 Cs, traditional gamma spectroscopy methods, which typically involve diluted salt samples, was not effective for analyzing the RTD samples. Since the 22 Na tracer radioactivity was very low, undiluted samples were necessary to detect the small amount of 22 Na tracer. Here, despite the high gamma radioactivity of the OR salt, increasing the detector-sample distance from 20 cm to 40 cm during gamma spectroscopy allowed the detection of radioactivity as low as 0.12 µCi/g 22 Na. The preparation of the 22 NaCl-LiCl tracer salt suitable for spiking into the OR salt was successful, and the mass determined by RTD was consistent with that estimated by salt level measurement. Therefore, the 22 Na-based RTD technique for total mass determination of the 60-kg molten salt system for OR is feasible, though more development work, particularly in the improving the uncertainty, is needed .

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Finite Element Analysis and Techno-economic Modeling of Solar Silicon Molten Salt Electrolysis

A new process is presented for low-cost one-step production of pure solid silicon from natural quartzite by molten salt electrolysis. At a process temperature of 1100°C, a techno-economic model including detailed mass and energy balances estimates energy consumption below 15 kWh/kg, with operating cost of $\$1.74$/kg and capital cost around $\$10,500$ per t/a (tonne annually) of production capacity for a 160,000 t/a plant. Use of an inert solid oxide membrane anode results in a pure oxygen by-product and no direct emissions. As a result, finite element analysis estimates the current density distribution and total current to inform the design of slab-shaped solid silicon cathodes.

14 SOLAR ENERGY↗
DOE OSTI2021

Machine learning application to single channel design of molten salt reactor

This study proposes a robust approach to quickly design a nuclear reactor core and explores the best performing machine learning (ML) technique for predicting feature parameters of the core. Here we implemented the approach into a hypothetical channel of molten salt reactors to demonstrate the applicability of the method. We prepared a Python tool, named Plankton, which couples to a reactor physics code and an optimization tool, and imports ML methods. The tool performs three consecutive phases: reactor database generation, machine learning application, and design optimization. We identified the extra trees method as the best performing estimator. With the estimator, we found nine optimum designs in total, one for each fuel-salt pair, and estimated all the performance metrics of the designs with a <5% prediction error compared to their actual values. U-Pu-NaCl fuel-salt gave promising results with the highest conversion ratio, the most negative feedback coefficient, and the lowest fast flux.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2021

Implementation of two-phase gas transport into VERA for molten salt reactor analysis

Molten salt reactors (MSRs) are a class of next-generation nuclear reactors that have received recent industrial and research interest. A generalized species transport solver was implemented in the Virtual Environment for Reactor Applications (VERA) computing suite to extend this tool to analyze liquid-fueled MSRs. This core simulator has been extended to model the transport of fission product gases into a collection of circulating gas bubbles with the purpose of removing the gases. This paper presents the governing species transport equation, along with various nuclear source terms. Development of the source term for phase migration is discussed, along with a simplified interfacial area tracking method. Finally, a case study on a simplified MSR loop is presented in which modeling parameters were varied to assess their impact on gas removal. The steady state results show that parameters such as bubble diameter, gas injection rate and mass transfer coefficient have a low to moderate effect on the fraction of xenon in the core region. Removal efficiency has the greatest effect on the fraction in the core region. After the pump bowl, bubble diameter has a minor effect on the fraction of xenon in the gas void. Finally, these results point out that increasing parameters such as mass transfer coefficient, gas injection rate, and removal efficiency drives the xenon into the circulating gas void, while decreasing bubble diameter also drives xenon into the gas void by increasing interfacial area.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2023

SCALE depletion capabilities for molten salt reactors and other liquid-fueled systems

Nuclear reactor systems that use fuel dissolved in a liquid have the potential for enhanced safety characteristics, improved fuel-cycle outcomes, and more efficient isotope-production configurations. In these reactor systems, the fueled liquid may simultaneously undergo irradiation, physical and chemical removal processes, and fueling. The modeling and simulation of this transmutation and decay with material additions and removals is an ongoing research area. An accurate simulation tool is critical to the reactor and fuel-cycle design, reactor deployment, and source-term characterization for these advanced reactor systems. The work described herein involved implementing, testing, and applying the capability to perform reactor physics simulations within the Oak Ridge National Laboratory-developed SCALE suite for nuclear systems analyses and design, leveraging much of its pedigree in quality-assurance and reactor-analysis capabilities. The functionalities to simulate irradiation with material feeds and removals had been added in ORIGEN, and the TRITON reactor physics sequence was extended to calculate the total removed material and track external nonirradiated mixtures to estimate separate processing or waste streams. Results from these capabilities align with analytical expectations obtained from ORIGEN for simplified test cases and with expectations for a molten salt reactor application. This implementation, available with the SCALE 6.3 release, provides for a more efficient and accurate material accountability methodology, allowing for the characterization, design, and analysis of the complete isotopic material inventory of advanced liquid-fueled systems for a variety of applications.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Design of a 2 MW ZrC/W-based molten-salt-to-sCO 2 PCHE for concentrated solar power

To increase the power cycle efficiency and lower the levelized cost of electricity (LCOE) of concentrated solar power (CSP) plants, printed circuit heat exchangers (PCHEs) capable of operating above 700 °C with molten chloride salt and a sCO 2 -based fluid are needed. In this paper, the design of a high-pressure, high-temperature, 2 MW PCHE comprised of a thermomechanically-robust, zirconium carbide/tungsten (ZrC/W) composite is conducted for CSP plants. The ZrC/W composite is a material with high thermal conductivity, high stiffness, and high failure strength at high temperatures, along with excellent resistance to thermal cycling and thermal shock. In this work, a thermomechanical design analysis was conducted to select appropriate material thicknesses of the ZrC/W plates, and to determine the geometrical dimensions and the thermal performance of the PCHE. The influences of the plate number and heat exchanger length on power density and pressure drop have also been systematically investigated. Economic analyses were conducted to compare the cost of ZrC/W-based PCHEs to those comprised of IN740H (a state-of-the-art, nickel-based superalloy) and 316 stainless steel (316SS). Finally, at a sufficiently high plate production rate, the manufacturing cost of ZrC/W-based PCHEs can be significantly lower, while achieving a much higher power density, compared with state-of-the-art, nickel alloy-based and stainless steel-based PCHEs.

14 SOLAR ENERGY↗
DOE OSTI2020

Investigation of impurity driven corrosion behavior in molten 2LiF-BeF 2 salt

A 1000 -h corrosion experiment of 316H stainless steel at 700 °C investigated the role of metal fluoride impurities CrF 2 and FeF 2 in LiF-BeF 2 (66-34 mole %) (FLiBe) salt. Inductively coupled plasma-optical emission spectroscopy (ICP-OES) demonstrated the ability to measure changes in the concentration of these fluorides in FLiBe salt. Cyclic voltammetry (CV) showed the potential for real-time quantitative concentration measurement of corrosion products in the molten salt. Materials characterization revealed that both impurity species influence the dissolution of Cr from the alloy. The collective results from these analysis methods advance the understanding of the influence impurities have on materials corrosion.

2LiF-BeF2↗
DOE OSTI2022

Grain size effect on corrosion behavior of Inconel 625 film against molten MgCl 2 -NaCl-KCl salt

This study evaluated the grain size effect of Inconel 625 film against molten chloride salt. It is found that larger grain size Inconel 625 exhibits better corrosion resistance by reducing Cr depletion. ~ 2 nm surface NiO layer of Inconel 625 is incapable of compensating the negative effects from more initiation corrosion sites. Mo is the least likely leached element and its enrichment occurs in Cr-depleted regions as a result of Mo diffusion. Mg and Cl are two most seen salt elements in all corroded samples, while K and Na only attack Inconel 625 with the smallest grain size.

14 SOLAR ENERGY↗
DOE OSTI2022

Effect of tellurium concentration on the corrosion and mechanical properties of 304 stainless steel in molten FLiNaK salt

In this study, the effect of Te concentration in molten FLiNaK salt on the corrosion and mechanical properties of 304 stainless steel was investigated. The corrosion depth of samples after the immersion tests for 48 h at 600 °C decreased with increasing Te concentration. Likewise, the sample after the immersion test containing 1.0 wt% of Te (1.0 wt% Te sample) showed less reduction in mechanical properties than the 0.1 wt% Te sample. We hypothesize that the condition for a Cr-oxide layer that has the protective property is fulfilled underneath the Ni-Fe rich layer which is formed by the selective leaching of Cr.

36 MATERIALS SCIENCE↗