Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mathematical methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Deriving the Landauer Principle From the Quantum Shannon Entropy

We derive an expression to determine the equilibrium probability distribution of a quantum state in contact with a noisy thermal environment that formally separates contributions from quantum and classical forms of probabilistic uncertainty. A statistical mechanical interpretation of this probability distribution enables us to derive an expression for the minimum free energy costs for arbitrary (reversible or irreversible) quantum state changes. In conclusion, based on this derivation, we demonstrate that–in contrast to classical systems–the free energy required to erase or reset a qubit depends sensitively on both the fidelity of the target state and on the physical properties of the environment, such as the number of quantum bath states, due primarily to the entropic effects of system-bath entanglement.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Multi-Dimensional Spectroscopy with Intense Entangled Beams: Entanglement-Enabled Phase Matching in a Collinear Beam Geometry

The experimental realization of quantum molecular spectroscopy with entangled photons remains challenging owing to the low signal-to-noise ratio resulting from the use of low-flux entangled photons. High-flux entangled photons via intense entangled beams can be used to improve the signal-to-noise ratio, but the presence of unentangled photons contaminates the quantum signal stemming from entangled photons. Here, we demonstrate how intense entangled beams can be used in multi-dimensional spectroscopy while retaining the advantage of photon entanglement. Our approach is broadly applicable to odd-ordered nonlinear spectroscopies, and it generates purely quantum spectroscopic signals. The proposed approach allows the recording of desired phase-matched signals even in a collinear beam geometry, which lifts the requirement of complicated beam geometry setups for phase matching in multi-dimensional spectroscopies.

Absorption spectroscopy↗
DOE OSTI2018

Nonadiabatic Hydrogen Dissociation on Copper Nanoclusters

Copper surfaces display high catalytic selectivity but have poor hydrogen dissociation kinetics; therefore, we consider icosahedral Cu 13 nanoclusters to understand how nanoscale structure might improve catalytic prospects. We find that the spin state is a surprisingly important design consideration. Cu 13 clusters have large magnetic moments due to finite size and symmetry effects and exhibit magnetization-dependent catalytic behavior. The most favorable transition state for hydrogen dissociation has a lower activation energy than that on single-crystal copper surfaces but requires a magnetization switch from 5 to 3 μ B . Without this switch, the activation energy is higher than that on single-crystal surfaces. Weak spin–orbit coupling hinders this switch, decreasing the kinetic rate of hydrogen dissociation by a factor of 16. Here, we consider strategies to facilitate magnetization switches through optical excitations, substitution, charge states, and co-catalysts; these considerations demonstrate how control of magnetic properties could improve catalytic performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Intramolecular Noncovalent Interactions Facilitate Thermally Activated Delayed Fluorescence (TADF)

In the conventional molecular design of thermally activated delayed fluorescence (TADF) organic emitters, simultaneously achieving a fast rate of reverse intersystem crossing (RISC) from the triplet to the singlet manifold and a fast rate of radiative decay is a challenging task. A number of recent experimental data, however, point to TADF emitters with intramolecular π-π interactions as a potential pathway to overcome the issue. Here, we report a comprehensive investigation of TADF emitters with intramolecular π…π or lone-pair…π non-covalent interactions. We uncover the impact of those intramolecular non-covalent interactions on the TADF properties. In particular, we find that folded geometries in TADF molecules can trigger lone-pair…π interactions, introduce a n → π* character of the relevant transitions, enhance the singlet-triplet spin-orbit coupling, and ultimately greatly facilitate the RISC process. Furthermore, this work provides a robust foundation for the molecular design of a novel class of highly efficient TADF emitters in which intramolecular non-covalent interactions play a critical function.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The Role of Ligand–Ligand Interactions in Multimodal Ligand Conformational Equilibria and Surface Pattern Formation

Multimodal chromatography uses multiple modes of interaction such as charge, hydrophobic, or hydrogen bonding to separate proteins. Recently, we used molecular dynamics (MD) simulations to show that ligands immobilized on surfaces can interact and associate with neighboring ligands to form hydrophobic and charge patches, which may have important implications for the nature of protein–surface interactions. Here, we study interfacial systems of increasing complexity—from a single immobilized multimodal ligand to high density surfaces—to better understand how ligand behavior is affected by the presence of a surface and the presence of other ligands in the vicinity, and how this behavior scales to larger systems. Furthermore, we find that tethering a ligand to a surface restricts its conformations to a subset of those observed in free solution, yet the ligand maintains flexibility in the plane of the surface and can form contacts with neighboring ligands. We find that although the formation of a contact between two neighboring ligands is slightly unfavorable, three neighboring ligands exhibit a preference for the formation of a fully connected cluster. To explore how these trends in ligand association extend to a larger surface with high density of ligands, we performed coarse-grained Monte Carlo (MC) simulations of a 132-ligand surface using ligand interactions parametrized based on free energies obtained from the three-ligand MD simulations. Despite their simplicity, the coarse-grained simulations qualitatively capture the cluster size distribution of ligands observed in detailed MD simulations. Quantitative differences between the two suggest opportunities for improvements in the coarse-grained energy function for efficient predictions of cluster and pattern formations. Our approach presents a promising route to the engineering of multimodal patterns for future chromatographic resin design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Effects of Size and Shape on the Tolerances for Misalignment and Probabilities for Successful Oriented Attachment of Nanoparticles

Oriented attachment (OA) of nanoparticles is an important pathway of crystal growth, but tools for quantitatively modeling OA are lacking. Here we present several simple models that relate the probability of achieving OA to basic geometric parameters such as particle size, shape, and lattice periodicity. A Moiré-domain model is applied to understand twist-misorientations between parallel surfaces, and it predicts that the range of twist angles yielding perfect OA is inversely related to the width of the contact area. This is confirmed and further developed using a surface functional model, which predicts how crystallographic registration forces drive the emergence of complex orientational energy landscapes. The energy landscapes are predicted to possess local minima that can trap particles in imperfect alignments, and these local minima become deeper and more numerous as the contact area increases, making OA more challenging for large particles. Further, a second set of models is presented to understand the sequence of events by which two crystallographic faces become co-planer after collision. We use a ‘central force approximation’ to quantitatively predict the odds of attaining coalignment between various faces when particles collide with random misalignments, and we show that in the absence of biasing forces, the probability of attaining alignment on a given face is roughly proportional to its solid angle as viewed from the center of the particle. The model predicts that OA is most favorable between well-faceted particles and becomes exceedingly unlikely for large spherical particles that express many microfacets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Insights into Waterflooding in Hydrocarbon-Bearing Nanochannels of Varying Cross Sections from Mesoscopic Multiphase Flow Simulations

Waterflooding is one of the geotechnique used to recover fuel sources from nanoporous geological formations. The scientific understanding of the process that involves the multiphase flow of nanoconfined fluids, however, has lagged, mainly due to the complex nanopore geometries and chemical compositions. To enable benchmarked flow of nanoconfined fluids, the architected geomaterials, such as synthesized mesoporous silica with tunable pore shapes and surface chemical properties, are used for designing and conducting experiments and simulations. This work uses a modified many-body dissipative particle dynamics (mDPD) model with accurately calibrated parameters to perform parametric flow simulations for studying the influences of waterflooding driven power, pore shape, surface roughness, and surface wettability on the multiphase flow in heptane-saturated silica nanochannels. Remarkably, up to 80\% reduction in the effective permeability is found for water-driven heptane flow in a baseline 4.5 nm-wide slit channel, when compared with the Hagen–Poiseuille equation. In the 4.5 nm-wide channels with architected surface roughness, the flow rate is found either higher or lower than the baseline case, depending on the shape and size of cross-sections. High wettability of the solid surface to water is essential for achieving high recovery of heptane, regardless of surface roughness. When the solid surface is less wetting or non-wetting to water, the existence of an optimal waterflooding driven power is found to allow for the highest possible recovery. A detailed analysis on the evolution of the transient water-heptane interface in those nanochannels is presented to elucidate the underlying mechanisms that impact or dictate the multiphase flow behaviors.

58 GEOSCIENCES↗
DOE OSTI2023

Effects of the Grazing Incidence Geometry on X-ray Photon Correlation Spectroscopy Measurements

X-ray photon correlation spectroscopy (XPCS) is a versatile tool to measure dynamics on the nanometer to micrometer scale in bulk samples. XPCS has also been applied in grazing incidence (GI) geometry to examine the dynamics of surface layers. However, considering GI scattering experiments more universally, the GI geometry leads to a superposition of signals due to reflection and refraction effects, also known from the distorted-wave Born approximation (DWBA). In this paper, the impact of these reflection and refraction effects on the correlation analysis is determined experimentally by measuring grazing incidence transmission XPCS (GT-XPCS) and grazing incidence XPCS (GI-XPCS) simultaneously for a thin film sample, showing non-equilibrium dynamics. Here the results of the GI and GT geometry comparisons are combined within the framework of the standardly applied, simplified DWBA. These calculations allow identifying the main contributions of the detected signal from the leading scattering terms along the out-of-plane direction q z , which dominate the measured intensity pattern on the detector. In combination with the calculation of the non-linear effect of refraction in GTSAXS and GISAXS, it is possible to identify experimental conditions that can be chosen to run experiments and data analysis as close as possible to transmission XPCS and to explain which limitations for data interpretations are observed. Consequently, the beam exposure can be significantly reduced by using GI geometry only. Calculations of experimental settings prior to experiments are detailed to determine suitable q z regions for a variety of material systems measured in bulk-sensitive GI-XPCS experiments, allowing us to determine the scaling behavior of typical decay times as a function of q that is comparable to the scaling behavior obtained in distortion-free GT-XPCS or transmission XPCS experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Quantified Pore-Scale Nanoparticle Transport in Porous Media and the Implications for Colloid Filtration Theory

This study evaluates the pore-scale distribution of silver nanoparticles during transport through a sandy porous medium via quantitative synchrotron X-ray computed microtomography (qSXCMT). The associated distributions of nanoparticle flow velocities and mass flow rates were obtained by coupling these images with computational fluid dynamic (CFD) simulations. This allowed, for the first time, the comparison of nanoparticle mass flow with that assumed by the standard colloid filtration theory (CFT) modeling approach. It was found that (i) 25% of the pore space was further from the grain than assumed by the CFT model; (ii) the average pore velocity agreed well between results of the coupled qSXCMT/CFD approach and the CFT model within the model fluid envelope, although the former were 2 times larger than the latter in the centers of the larger pores and individual velocities were upwards of 20 times those in the CFT model at identical distances from grain surfaces ; and (iii) approximately 30% of all nanoparticle mass and 38% of all nanoparticle mass flow occurred further away from the grain surface than expected by the CFT model. Furthermore, this work suggests that a significantly smaller fraction of nanoparticles than expected will contact a grain surface by diffusion via CFT models, likely contributing to inadequate CFT model nanoparticle transport predictions.

42 ENGINEERING↗
DOE OSTI2021

Scaling Theory of Neutral Sequence-Specific Polyampholytes

The primary sequence of charged monomers in a polyampholyte has a profound effect on its conformational properties. In this work, theory and simulations are used to predict how the sequence influences the single-chain behavior of globally neutral polyampholytes (PAs) under salt-free conditions. We consider PAs with Markov statistics of charges, where charge “blockiness” is defined by the correlation λ along the chain. These PAs cover a wide spectrum of primary sequences ranging from alternating (λ = –1) to ideally random (λ = 0) to diblock (λ → 1). In a theta solvent, sufficiently long PAs of any primary sequence form globules, but their internal structure, as well as the position and sharpness of the coil–globule transition, crucially depends on λ. Further, using scaling arguments, we demonstrate that the excess charge of the globule correlation volume (blob) increases with increasing λ, thereby inducing stronger Coulomb attractions between neighboring blobs of opposite charge and leading to higher density PA globules. Scaling predictions are supported by the results of the random phase approximation (RPA) and coarse-grained molecular dynamics simulations. A generalization to good and poor solvents is presented that enables the construction of the resulting scaling diagram of PA conformations in terms of solvent quality and charge blockiness, thereby providing a comprehensive molecular understanding of the role of the PA primary sequence in the chain structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Hydrogen Bonding and Its Effect on the Orientational Dynamics of Water Molecules inside Polyelectrolyte Brush-Induced Soft and Active Nanoconfinement

Despite being the most ubiquitous compound on Earth, the fundamental properties of water are not fully understood, especially in nanoconfinement. Densely grafted polyelectrolyte (PE) molecules attain the configuration of a “brush”: these PE brushes, due to their ability to form hydrogen bonds (HBs) with water via the PE functional groups, act as a source of soft and active nanoconfinement for the brush-trapped water molecules. In this paper, we study the effects of PE brush-induced confinement on the structure, dynamics and energetics of the water-water and water-PE HBs. Our results indicate a significant weakening of the HBs from bulk to sparsely grafted to densely grafted brushes. i.e., by increasing the degree of brush-induced nanoconfinement. We explain that this weakening of water-water HBs is caused by the disruption of the extended network of water molecules within the brush-induced nanoconfinement. This is confirmed by performing a ring structure analysis of the water molecules, which yields a reduction in the average ring size at higher degrees of brush-induced nanoconfinement (i.e., at higher brush grafting densities). Furthermore, we investigate the role of HB on the orientational dynamics of the water molecules. Here, we observe that the rotational motion of the water molecules becomes sluggish inside the PE brushes. Recent findings have indicated that the water and counterions trapped in brush-induced nanoconfinement demonstrate structures (in combination with the PE functional group) analogous to that in “water-in-salt” electrolytes that have seen extensive recent uses for Li-ion battery applications. However, the rotational dynamics of water molecules inside the brush-induced nanoconfinement is found to be distinctly different from that of conventional “water-in-salt” electrolytes in absence of any confinement; therefore, the present study will provide the necessary platform towards conceptualizing polymer-based nanoconfinement for battery applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

How Cooperatively Folding Are Homopolymer Molecular Knots?

Detailed thermodynamic analysis of complex systems with multiple stable configurational states allows for insight into the cooperativity of each individual transition. In this work, we derive a heat capacity decomposition comprising contributions from each individual configurational state, which together sum to a baseline heat capacity, and contributions from each state-to-state transition. We apply this analysis framework to a series of replica exchange molecular dynamics simulations of linear and 1-1 coarse-grained homo-oligomer models, which fold into stable, configurationally well-defined molecular knots, in order to better understand the parameters leading to stable and cooperative folding of these knots. We find that a stiff harmonic backbone bending angle potential is key to achieving knots with specific 3D structures. Tuning the backbone equilibrium angle in small increments yields a variety of knot topologies. Populations of different knotted states as a function of temperature can also be manipulated by tuning the backbone torsion stiffness or by adding side-chain beads. We find that sharp total heat capacity peaks for the homo-oligomer knots are largely due to a coil-to-globule transition rather than a cooperative knotting step. Furthermore, in some cases, the cooperativity of globule-to-knot and coil-to-globule transitions is comparable, suggesting that highly cooperative folding to knotted structures can be achieved by refining the model parameters or adding sequence specificity.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Random Knotting in Fractal Ring Polymers

Many ring polymer systems of physical and biological interest exhibit both pronounced topological effects and nontrivial self-similarity, but the relationship between these two phenomena has not yet been clearly established. Here, we use theory and simulation to formulate such a connection by studying a fundamental topological property—the random knotting probability—for ring polymers with varying fractal dimension, d f . Using straightforward scaling arguments, we generalize a classic mathematical result, showing that the probability of a trivial knot decays exponentially with chain size, N, for all fractal dimensions: P 0 (N) ∝ exp(–N/N 0 ). However, no such simple considerations can account for the dependence of the knotting length, N 0 , on d f , necessitating a more involved analytical calculation. This analysis reveals a complicated double-exponential dependence, which is well supported by numerical data. By contrast, functional forms typical of simple scaling theories fail to adequately describe the observations. These findings are equally valid for two-dimensional ring polymer systems, where “knotting” is defined as the intersection of any two segments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Understanding Viscoelasticity of an Entangled Silicone Copolymer via Coarse-Grained Molecular Dynamics Simulations

Entangled dynamics is important for understanding rheological properties of long-chain polymers. For entangled homopolymers, the classic tube-reptation model and its refinements have been successfully applied to quantify properties like diffusion coefficient and zero-rate viscosity. However, the application of such models to copolymers has been limited despite scientific and industrial importance. Here, we study the entangled melt dynamics of poly(dimethyl-co-diphenyl)siloxane random copolymer for a range of mean-composition-ratio ϕ of the diphenyl component via long-term molecular dynamics simulation with a recently developed coarse-grained model. We found that the segmental relaxation is heterogeneous at the monomeric level because of compositional fluctuations. However, at the chain-entanglement level and higher length scales, the viscoelastic response is homogeneous with compositional dependence only through the overall diphenyl fraction ϕ. The relaxation modulus of the entangled copolymer melt conforms to the Likhtman–McLeish model, and the viscosity predicted using our current coarse-grained parameters is in good quantitative agreement with experimental data.

Copolymers↗
DOE OSTI2022

Generation of Tunable Stochastic Sequences Using the Insulator–Metal Transition

Probabilistic computing is a paradigm in which data are not represented by stable bits, but rather by the probability of a metastable bit to be in a particular state. The development of this technology has been hindered by the availability of hardware capable of generating stochastic and tunable sequences of “1s” and “0s”. The options are currently limited to complex CMOS circuitry and, recently, magnetic tunnel junctions. Here, we demonstrate that metal–insulator transitions can also be used for this purpose. We use an electrical pump/probe protocol and take advantage of the stochastic relaxation dynamics in VO 2 to induce random metallization events. A simple latch circuit converts the metallization sequence into a random stream of 1s and 0s. The resetting pulse in between probes decorrelates successive events, providing a true stochastic digital sequence.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

In Situ Ion Counting for Improved Implanted Ion Error Rate and Silicon Vacancy Yield Uncertainty

An in situ counted ion implantation experiment improving the error on the number of ions required to form a single optically active silicon vacancy (SiV) defect in diamond 7-fold compared to timed implantation is presented. Here, traditional timed implantation relies on a beam current measurement followed by implantation with a preset pulse duration. It is dominated by Poisson statistics, resulting in large errors for low ion numbers. Instead, our in situ detection, measuring the ion number arriving at the substrate, results in a 2-fold improvement of the error on the ion number required to generate a single SiV compared to timed implantation. Through postimplantation analysis, the error is improved 7-fold compared to timed implantation. SiVs are detected by photoluminescence spectroscopy, and the yield of 2.98% is calculated through the photoluminescence count rate. Hanbury–Brown–Twiss interferometry is performed on locations potentially hosting single-photon emitters, confirming that 82% of the locations exhibit single photon emission statistics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗