Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Material”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

In-situ tube burst testing and high-temperature deformation behavior of candidate materials for accident tolerant fuel cladding

The high resistance of cladding to plastic deformation and burst failure is one of the most essential properties of accident tolerant fuel (ATF) for maintaining structural integrity during a loss-of-coolant accident (LOCA) since the deformation and burst behavior governs the cooling efficiency of flow channels and process of fission product release. To simulate and evaluate such deformation and burst process of thin-walled cladding, an in-situ testing and evaluation method has been developed on the basis of visual imaging and image analysis techniques. The method uses a specialized optics system consisted of a high-resolution video camera, light filtering unit, and monochromatic light sources, and the in-situ testing is performed using a 50 mm long pressurized thin-walled tubular specimen set in a programmable furnace. In this study eleven (11) candidate cladding materials for ATF, i.e., 6 FeCrAl alloys and 5 nanostructured steels, were tested using the newly developed method, and the time-dependent images were analyzed to produce detailed deformation and burst data such as true hoop stress, strain (creep) rate, and failure stress. Relatively soft FeCrAl alloys deformed and burst below 800°C while negligible strain rates were measured for higher strength alloys and/or for relatively thick wall specimens.

Gussev, Maxim N.↗
DOE OSTI2018

Anisotropic magnetic properties of the triangular plane lattice material TmMgGaO4

Highlights: • TmMgGaO{sub 4} crystallizes in the R-3m space group with the YbFe{sub 2}O{sub 4} structure. • TmMgGaO{sub 4} exhibits geometric magnetic frustration with no ordering down to 1.8 K. • Magnetic properties of TmMgGaO{sub 4} are highly anisotropic. - Abstract: The crystal growth, structure, and basic magnetic properties of TmMgGaO{sub 4} are reported. The Tm ions are located in a planar triangular lattice consisting of distorted TmO{sub 6} octahedra, while the Mg and Ga atoms randomly occupy intermediary bilayers of M-O triangular bipyramids. The Tm ions are positionally disordered. The material displays an antiferromagnetic Curie Weiss theta of ∼−20 −25 K, with no clear ordering visible in the magnetic susceptibility down to 1.8 K; the structure and magnetic properties suggest that ordering of the magnetic moments is frustrated by both structural disorder and the triangular magnetic motif. Single crystal magnetization measurements indicate that the magnetic properties are highly anisotropic, with large moments measured perpendicular to the triangular planes. At 2 K, a broad step-like feature is seen in the field-dependent magnetization perpendicular to the plane on applied field near 2 T.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Bridging the Void: Halogen Bonding and Aromatic Interactions to Program Luminescence and Electronic Properties of π -Conjugated Materials in the Solid State

π-Conjugated materials are promising candidates for emerging organic optoelectronic devices empowered by molecular design. The unsolved challenges of predicting and controlling their packing as solids, central to their properties and performance, currently limits their practical application. As noncovalent interactions drive packing, control over such interactions are critical to bridging from chemical structure to functional properties. In molecular crystals, halogen bonding and interactions of aromatic rings have emerged as versatile tools for noncovalent control with tailored luminescence and electronic properties. Here, we describe how the interplay of these directional and tunable interactions can engineer properties, including stimuli-responsive behavior. Specifically, halogen bonding can provide robust designs for directing 2D molecular assembly, whereas the intentional interactions of aromatic rings can yield metastable, switchable packing modes, as well as programmed stacking between layers of chromophores. Examples, herein, demonstrate clear relationships between assembly by design and resulting solid-state properties, and strategies presented offer guidance for future designs of π-conjugated molecular materials using specific aromatic interactions and halogen bonding.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Polynitrogen High Energy Density Materials Synthesized by Nonequilibrium Plasma

Metal pentazolate compounds that contain 5-nitrogen singly charged anion rings are an interesting class of materials from a thermodynamics perspective. These compounds are believed to be equilibrium phases only at extremely high pressures, and thus, they constitute exotic states of matter at ambient pressure and temperature. Moreover, the energy released by these pentazolate compounds upon relaxation to the equilibrium state at ambient conditions is in the range 1 to 10 MJ per kg, rivaling that of combustion reactions. The synthesis of pentazolates is not an easy task, and there are only two known methods, each of which has significant challenges. Here, the development of new scalable synthesis routes could enable the production of these exotic materials in sufficient quantity to explore their properties more widely beyond the context of explosives and propellants. In this Perspective, it is argued that nonequilibrium plasma is a promising reaction medium for the synthesis of metal pentazolate compounds, for example from the corresponding metal azide and N 2 gas activated by the discharge at low background temperature.

Chemical reactions↗
DOE OSTI2020

Design, Synthesis, and Characterization of Polymer Precursors to Li x PON and Li x SiPON Glasses: Materials That Enable All-Solid-State Batteries (ASBs)

LiPON-like glasses that form lithium dendrite impenetrable interfaces between lithium battery components are enabling materials that may replace liquid electrolytes permitting production of all-solid-state batteries (ASBs). Unfortunately, to date, such materials are introduced only via gas-phase deposition. Furthermore, we demonstrate the design and synthesis of easily scaled, lowtemperature, low-cost, solution-processable inorganic polymers containing LiPON/LiSiPON elements. OPCl 3 and hexachlorophosphazene [Cl 2 P=N] 3 provide starting points for elaboration using MNH 2 (M = Li/Na) or (Me 3 Si)NH followed by reaction with controlled amounts of LiNH 2 to produce oligomers/polymers with molecular weights (MWs) ≈1–2 kDa characterized by multinuclear NMR, gel permeation chromatography (GPC), thermogravimetric analysis (TGA), Fourier-transform infrared (FTIR), X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and matrix-assisted laser desorption/ ionization (MALDI)-time-of-flight (ToF) offering stabilities to 150–200 °C and ceramic yields (800 °C) of 50–60%. 7 Li NMR suggests that precursor-bound Li + dissociates easily, beneficial for electrochemical applications. XPS shows higher N/P ratios (1–3) than via gas-phase methods (<1) correlating N/P ratios, 7 Li shifts, and Li + conductivities. Li 2 SiPHN offers the highest ambient conductivity of 3 × 10 –1 mS cm –1 at 400 °C/2 h/N 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2018

Nucleation of dislocations and their dynamics in layered oxide cathode materials during battery charging

Lithium-rich layered oxides (LRLO) are among the leading candidates for the next-generation cathode material for energy storage, delivering 50% excess capacity over commercially used compounds. Despite excellent prospects, voltage fade has prevented effective use of the excess capacity, and a major challenge has been a lack of understanding of the mechanisms underpinning the voltage fade. Here, using operando three-dimensional Bragg coherent diffractive imaging, we directly observe the nucleation of a mobile dislocation network in LRLO nanoparticles. The dislocations form more readily in LRLO as compared with a classical layered oxide, suggesting a link between the defects and voltage fade. We show microscopically how the formation of partial dislocations contributes to the voltage fade. The insights allow us to design and demonstrate an effective method to recover the original high-voltage functionality. Furthermore, our findings reveal that the voltage fade in LRLO is reversible and call for new paradigms for improved design of oxygen-redox active materials.

25 ENERGY STORAGE↗
DOE OSTI2018

Liquid crystal self-assembly of upconversion nanorods enriched by depletion forces for mesostructured material preparation

Monodisperse rod-like colloidal particles are known for spontaneously forming both nematic and smectic liquid crystal phases, but their self-assembly was typically exploited from the fundamental soft condensed matter physics perspective. Here we demonstrate that depletion interactions, driven by non-adsorbing polymers like dextran and surfactants, can be used to enrich the self-organization of photon-upconversion nanorods into orientationally ordered nematic and smectic-like membrane colloidal superstructures. We study thermodynamic phase diagrams and demonstrate polarization-dependent photon upconversion exhibited by the ensuing composites, which arises from the superposition of unique properties of the solid nanostructures and the long-range ordering enabled by liquid crystalline self-organization. Finally, we discuss how our method of utilizing self-assembly due to the steric and electrostatic interactions, along with attractive depletion forces, can enable technological uses of lyotropic colloidal liquid crystals and mesostructured composite materials enabled by them, even when they are formed by anisotropic nanoparticles with relatively small aspect ratios.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Charging toward improved lithium-ion polymer electrolytes: exploiting synergistic experimental and computational approaches to facilitate materials design

Ion-conducting polymer electrolytes are attractive materials for all-solid-state lithium-ion batteries (LiBs) as a result of their potential to improve performance, mitigate safety concerns, and facilitate efficient device processing. Understanding how lithium-ionic transport is influenced by the macromolecular features, such as dielectric strength, solvation site connectivity, monomer segment relaxation timescales, segregation strength, and mesophase composition, is crucial for advancing ion-conducting materials. The integration of experimental and computational efforts can provide comprehensive links between chemical and structural characteristics (e.g., ion solvation, chain mobility, morphology) and macroscopic performance properties, accelerating the adoption of next-generation polymer electrolytes. Furthermore, this perspective highlights several synergistic experimental–computational approaches that have provided unique insights into local ion and polymer interactions, chain dynamics, and thermodynamics to promote the rational design of new ion-conducting polymers. Additionally, this work concludes with several suggested areas in which methodologies can be augmented, novel properties can be realized, and polymer electrolytes can be integrated to generate more robust LiB systems.

25 ENERGY STORAGE↗
DOE OSTI2015

Transport properties of cubic crystalline Ge 2 Sb 2 Te 5 : a potential low-temperature thermoelectric material.

Ge 2 Sb 2 Te 5 (GST) has been widely used as a popular phase change material. In this study, we show that it exhibits high Seebeck coe cients 200 - 300 μV/K in its cubic crystalline phase (c-GST) at remarkably high p-type doping levels of 1 10 19 - 6 10 19 cm -3 at room temperature. More importantly, at low temperature (T = 200 K), the Seebeck coe cient was found to exceed 200 μV/K for a doping range 1 10 19 - 3.5 10 19 cm -3 . Given that the lattice thermal conductivity in this phase has already been measured to be extremely low ( 0.7 W/m-K at 300 K), our results suggest the possibility of using c-GST as a low-temperature thermoelectric material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Aerodynamic levitator for in situ x-ray structure measurements on high temperature and molten nuclear fuel materials

An aerodynamic levitator with carbon dioxide laser beam heating was integrated with a hermetically sealed controlled atmosphere chamber and sample handling mechanism. The system enabled containment of radioactive samples and control of the process atmosphere chemistry. The chamber was typically operated at a pressure of approximately 0.9 bars to ensure containment of the materials being processed. Samples 2.5-3 mm in diameter were levitated in flowing gas to achieve containerless conditions. Levitated samples were heated to temperatures of up to 3500 °C with a partially focused carbon dioxide laser beam. Sample temperature was measured using an optical pyrometer. The sample environment was integrated with a high energy (100 keV) x-ray synchrotron beamline to enable in situ structure measurements to be made on levitated samples as they were heated, melted, and supercooled. The system was controlled from outside the x-ray beamline hutch by using a LabVIEW program. Measurements have been made on hot solid and molten uranium dioxide and binary uranium dioxide-zirconium dioxide compositions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2016

High pressure polymorphs and amorphization of upconversion host material NaY(WO 4 ) 2

The pressure effect on the structural change of upconversion host material NaY(WO 4 ) 2 was studied in this paper by using in-situ synchrotron X-ray diffraction. A transition from the initial scheelite phase to the M-fergusonite phase occurs near 10 GPa, and another phase transition is found near 27.5 GPa, which could be an isostructural transition without symmetry change. The sample becomes amorphous when the pressure is fully released from high pressure. Finally, this work demonstrates the possibility of synthesizing various polymorph structures for non-linear optical applications with a high pressure, chemical doping, or strained thin-film nanostructure process.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Investigation of Thermal Interface Materials Using Phase-Sensitive Transient Thermoreflectance Technique: Preprint

With increasing power density in electronics packages/modules, thermal resistances at multiple interfaces are a bottleneck to efficient heat removal from the package. In this work, the performance of thermal interface materials such as grease, thermoplastic adhesives and diffusion-bonded interfaces are characterized using the phase-sensitive transient thermoreflectance technique. A multi-layer heat conduction model was constructed and theoretical solutions were derived to obtain the relation between phase lag and the thermal/physical properties. This technique enables simultaneous extraction of the contact resistance and bulk thermal conductivity of the TIMs. With the measurements, the bulk thermal conductivity of Dow TC-5022 thermal grease (70 to 75 um bondline thickness) was 3 to 5 W/(m-K) and the contact resistance was 5 to 10 mm2-K/W. For the Btech thermoplastic material (45 to 80 μm bondline thickness), the bulk thermal conductivity was 20 to 50 W/(m-K) and the contact resistance was 2 to 5 mm2-K/W. Measurements were also conducted to quantify the thermal performance of diffusion-bonded interface for power electronics applications. Results with the diffusion-bonded sample showed that the interfacial thermal resistance is more than one order of magnitude lower than those of traditional TIMs, suggesting potential pathways to efficient thermal management.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2019

Large-Area Material and Junction Damage in c-Si Solar Cells by Potential-Induced Degradation

A new potential-induced degradation (PID) mechanism for c-Si is reported. Multiple characterization techniques in various aspects of a material's chemical, structural, electrical, and optoelectrical nature, as well as in atomic, nanometer, micrometer, millimeter, and cell and module scales, are combined. All results point consistently to a new discovery: substantial large-area deterioration of materials and junctions plays a major role.

14 SOLAR ENERGY↗