Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MOLD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Progress in net shape fabrication of alpha sic turbine components

An update of the status of ceramic component development of the AGT Programs is presented. Activity on AGTO Program focussed on the following: successful transition from the prototype to engine configuration rotor, investigation of alternate rotor molding techniques, and completion of scroll assemblies. Progress on the Garrett AGT Program was highlighted by the introduction of plastic molding and extrusion to parts which were previously fabricated by slip casting and isopressing respectively.

Sweeting, T. B.↗
NASA NTRS1983

Steps toward 8 m honeycomb mirror blanks. II - Experiments with waffleplate and honeycomb casting

A technique for fabricating large low-cost light-weight borosilicate-glass mirrors for ground and space-based astronomy is described. This technique involves the remelting of glass into complex molds for vacuum-formed ceramic fiber and is used to cast in one piece either waffleplate or full honeycomb sandwich blanks. The construction of molds and the cycle for melting and annealing are described in detail. A 1.1-m square blank with a 22.4-cm-thick face and 1.6-cm ribs, 15-cm deep on 15-cm squares, has been cast, and a 1.8-m circular blank of full honeycomb construction is scheduled for production. The casting of blanks of up to 8-m in diameter is anticipated, with densities of 200 kg/sq m (like that of the ST mirror) being typical of casting.

Hill, J. M.↗
NASA NTRS1984

Sealing ceramic material in low melting point glass

A structured device placed in an aerated crucible to pack ceramics molding substance that is to be processed was designed. The structure is wrapped by sealing material made of pyrex glass and graphite foil or sheet with a weight attached on top of it. The crucible is made of carbon; the ceramics material to be treated through heat intervenient press process is molding substance consisting mainly of silicon nitride.

Moritoki, M.↗
NASA NTRS1985

High-thermal-gradient Superalloy Crystal Growth

Single, (001)-oriented crystals of PWA 1480 were processed in alumina/silica shell molds in a laboratory high gradient furnace. The furnace employs a graphite resistance heated element, a radiation baffle, and a water cooled radiation trap below the baffle. All crystals were grown in vacuum (10 torr) and all heat transfer was radiative. The element is constructed with a variable cross section that is tapered just above the baffle to maximize heat input and therefore thermal gradient. A maximum alloy temperature of 1600 C was used. A thermal gradient of 130 deg C/cm was recorded at 1370 C just above the solidus of the PWA 1480 alloys. Crystal bars with 14.4 and 17.5 mm diameters were grown in alumina/silica shell molds. Each crystal was started from a 1.6 mm pencil seed at a rate of 76 mm/hr and slowly accelerated to a rate of 200 mm/hr under computer control. Volume percent porosity and average pore size were measured as functions of distance in representative bars. Low cycle fatigue behavior and stress rupture properties were determined.

Pearson, D. D.↗
NASA NTRS1986

Thermoplastic Composites for Research-Model Components

Oriented unidirectional prepreg tapes formed in ceramic molds. New technique developed at Langley Research Center, using ceramic mold for fabrication of models from graphite/thermoplastic materials. Upper surface of wings and fuselage of advanced airplane selected as shape to test fabrication technique. Technique well suited for other complex shapes as well. Thermoplastic composite easily workable with normal shop equipment and painted and repaired by standard methods.

Guenther, B. F.↗
NASA NTRS1986

Eliminating Thermal Cracks in Flange/Duct Joints

Improved technique for attaching aluminum flange to aramid/epoxy duct prevents subsequent development of cracks in joint during thermal stress. Flange butted against cylindrical mold on which duct is fabricated. Flange has tapered neck so will nest in duct opening. Epoxy-impregnated aramid tape wrapped around mold so tape overlaps flange. While tape is wrapped, pressure applied to it and inside of flange as heated uniformly to maximum expected operating temperature. Heat and pressure maintained until aramid/epoxy laminations have cured.

Adams, J. E.↗
NASA NTRS1985

Properties of autoclaved Gr/PI composites made from improved tack PMR-15 prepreg

Autoclave processing studies were conducted, using improved tack PMR-15 prepreg, to determine the effect of tack enhancing PMR resin modifications on composite processability and mechanical properties. Improved tack graphite fiber reinforced PMR-15 prepregs were prepared and exposed to ambient conditions for various times and then autoclave molded into composites. Composite specimens were prepared and tested for flexural and interlaminar shear strengths at room temperature and 316 C. The retention of flexural and interlaminar shear strength as a function of exposure in air at 316 C was also determined. The results show that the modified PMR resin solutions provide prepreg with improved tack and drape retention characteristics without adversely affecting processability or mechanical properties of autoclave molded graphite fiber reinforced PMR-15 composites.

Vannucci, R. D.↗
NASA NTRS1985

Thermoplastic matrix composite processing model

The effects the processing parameters pressure, temperature, and time have on the quality of continuous graphite fiber reinforced thermoplastic matrix composites were quantitatively accessed by defining the extent to which intimate contact and bond formation has occurred at successive ply interfaces. Two models are presented predicting the extents to which the ply interfaces have achieved intimate contact and cohesive strength. The models are based on experimental observation of compression molded laminates and neat resin conditions, respectively. Identified as the mechanism explaining the phenomenon by which the plies bond to themselves is the theory of autohesion (or self diffusion). Theoretical predictions from the Reptation Theory between autohesive strength and contact time are used to explain the effects of the processing parameters on the observed experimental strengths. The application of a time-temperature relationship for autohesive strength predictions is evaluated. A viscoelastic compression molding model of a tow was developed to explain the phenomenon by which the prepreg ply interfaces develop intimate contact.

Dara, P. H.↗
NASA NTRS1984

Graphite/epoxy composite stiffened panel fabrication development

This report describes the manufacturing development procedures used to fabricate a series of carbon/epoxy panels with integrally molded stiffeners. Panel size was started at 6 inches by 18 inches and one stiffener and increased to 30 inches by 60 inches and six integral stiffeners. Stiffener concepts were optimized for minimum weight (or mass) to carry stress levels from 1500 lbs/inch to 25,000 lbs/inch compression load. Designs were created and manufactured with a stiffener configuration of integrally molded hat, J, I, sine wave I, solid blade, and honeycomb blade shapes. Successful and unsuccessful detail methods of tooling, lay-up methods, and bagging methods are documented. Recommendations are made for the best state-of-the-art manufacturing technique developed for type of stiffener construction.

Palmer, R. J.↗
NASA NTRS1987

Taking Impressions of Hidden Cavity Walls

Lightweight, portable internal-molding device makes it possible to measure radii of, or examine contours of, passageways in hidden or complicated cavities. With device, measurements made in field, without returning assemblies to shop or laboratory for inspection. Molding head expands when compressed air applied. Inflatable tubes around head perform dual sealing and aligning function.

Burley, D.↗
NASA NTRS1987

Cleaner Vacuum-Bag Curing

Improvement upon recommended procedures saves time and expense. Autoclave molding in vacuum bag cleaner if adhesive-backed covering placed around caul plate as well as on mold plate. Covering easy to remove after curing and leaves caul plate free of resin deposits.

Clemons, J. M.↗
NASA NTRS1987

Processable Polyimides Containing ATBN Elastomers

Void-free moldings obtained without serious sacrifice in other properties. New synthesis produces high-temperture linear aromatic polyimide processed in imide form to yield tough, void-free components without serious sacrifice in other properties. Linear aromatic condensation polyimides are materials of prime choice for use as adhesives, composite matrix resins, films, coatings, and/or moldings where durability at temperatures as high as 200 to 300oC needed. Finding increasing use in aircraft and spacecraft applications.

St. Clair, Anne K.↗
NASA NTRS1987

Polyimides From BTDA, m-PDA, and HDA

Aliphatic segments in polyimide backbones achieve low molding temperatures and resistance to solvents. Low molding temperatures in combination with good solvent resistance make these polymers candidates for use in aerospace applications.

Delano, Chadwick B.↗
NASA NTRS1987

Thermo-oxidatively stable condensation polyimides containing 1,1,1-triaryl-2,2,2-trifluoroethane dianhydride and diamine monomers

Nine new condensation polyimides containing the trifluorophenylethylidene linkage were synthesized by the amic-acid route. Several other polyimides, including some with the hexafluoroisopropylidene linkage, were also prepared as controls. Amic-acid solutions were characterized by determining their inherent viscosities prior to thermal conversion into polyimide films. Glass transition temperatures (T sug g), thermogravimetric analysis (TGA), and isothermal weight loss data were obtained for the films. The films were pulverized into molding powders which, in turn, were thermally processed under pressure into neat resin discs. The discs were also characterized by T sub gs and 316 C and 371 C isothermal weight losses. The film study identified two new polyimides with T sub gs greater that 371 C and two new polyimides with low rates of weight loss. The resin discs exhibited the same overall trends in T sub g and weight loss as the respective films, however the weight loss per unit surface area was always greater, presumably due to voids or to mechanical degradation induced during preparation of the molding powders.

Alston, William B.↗
NASA NTRS1987

Micro and macro approaches to tough polymers for composites

The progress to date on the development of techniques to toughen continuous thermoplastic composites is summarized. The work, using the approach of toughening the polycarbonate composite matrix with rubber particles, has focused on determining the differences between Double Cantilever Beam (DCB) samples molded inhouse and those molded by NASA. Specifically, an effort was made to account for the differences in fracture toughness observed between the various specimens. In addition, preliminary results of tensile dilatometry tests are described; these tests suggest that processes leading to increased volume and enhanced shear banding are occurring within the rubber toughened system. The results of the effort using another approach, the preparation of random block copolycarbonates, are presented. The synthetic route to these species was modified so that higher molecular weights of these materials can be obtained. In addition, an attempt is being made to determine the exact block length or the number of functional groups in the oligomers since this procedure also should lead to high molecular weight materials. Dynamic mechanical analysis of the copolymer prepared so far indicates that the scale of cooperative molecular motion of the PBA polycarbonate at sub-Tg temperatures is larger than five monomer units. Efforts to find a suitable rubber-toughener for a thermoset system (bismaleimides) is also discussed. Included is a description of the various tougheners intended for use or currently being used.

Yee, Albert F.↗
NASA NTRS1986

Acoustic characterization of composite cure

The relationship between the time evolution of ultrasonic longitudinal velocities, measured in the course of the cure of 3501-6 neat and fiber-reinforced resin, and the time evolution of the degree of cure was studied. The resin samples were placed in a mold, one side of which was a graphite plate, while the rest was made of stainless steel. After placing the mold in a press and applying a single-cycle 5-MHz pulse to the transducer bonded to the outer side of the graphite plate, the echo resulting from the resin-graphite interface and the subsequent echoes from within the resin layer were recorded with a 200-MHz, 8-bit digitizer. The degree of cure was calculated from the acoustic response, using the relationships derived by Winfree and Parker (1986). The calculated degree of cure had the expected time dependence, and the agreement between the degree of cure measured for the neat resin and the prepreg was reasonable.

Parker, F. R.↗
NASA NTRS1988

Making EDM Electrodes By Stereolithography

Stereolithography is computer-aided manufacturing technique. Used to make models and molds of electrodes for electrical-discharge machining (EDM). Eliminates intermediate steps in fabrication of plastic model of object used in making EDM electrode to manufacture object or mold for object.

Barlas, Philip A.↗
NASA NTRS1988

Developing Crystallinity In Linear Aromatic Polyimides

New technique improves melt flow of polyimide. Uses chemical imidization or cyclodehydration techniques that do not cause significant decrease in molecular weight. Process involves dissolution of polyamide acid in amide solvent or mixture of ether and amide solvent at low percentage of solids followed by treatment of this solution with aprotic organic base, such as triethylamine or pyridine, for period of time prior to treatment with organic dehydrating agent. Latter treatments facilitates formation of polyimide. Useful for production of polyimide molding materials. Expected to have widespread application in preparation of easily processed adhesives, molding powders, and matrix resins.

St. Clair, Terry L.↗