Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MICROWAVES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Microwave absorption properties and infrared emissivities of ordered mesoporous C-TiO{sub 2} nanocomposites with crystalline framework

Ordered mesoporous C-TiO{sub 2} nanocomposites with crystalline framework were prepared by the evaporation-induced triconstituent co-assembly method. The products were characterized by XRD, TEM, N{sub 2} adsorption-desorption and TG. Their microwave absorption properties were investigated by mixing the product and epoxy resin. It is found that the peak with minimum reflection loss value moves to lower frequencies and the ordered mesoporous C-TiO{sub 2} nanocomposite possesses an excellent microwave absorbing property with the maximum reflection loss of -25.4 dB and the bandwidth lower than -10 dB is 6.6 GHz. The attenuation of microwave can be attributed to dielectric loss and their absorption mechanism is discussed in detail. The mesoporous C-TiO{sub 2} nanocomposites also exhibit a lower infrared emissivity in the wavelength from 8 to 14 {mu}m than that of TiO{sub 2}-free powder. -- Graphical abstract: Ordered mesoporous C-TiO{sub 2} nanocomposite with crystalline framework possess excellent microwave absorbing properties with the maximum reflection loss of -25.4 dB and the bandwidth lower than -10 dB is 6.6 GHz. Display Omitted

36 MATERIALS SCIENCE↗

Microwave-assisted hydrothermally grown epitaxial ZnO films on Left-Pointing-Angle-Bracket 1 1 1 Right-Pointing-Angle-Bracket MgAl{sub 2}O{sub 4} substrate

In this report, epitaxial ZnO films were grown on Left-Pointing-Angle-Bracket 1 1 1 Right-Pointing-Angle-Bracket MgAl{sub 2}O{sub 4} single crystal substrates using Microwave Assisted Hydrothermal (MAH) method with microwave radiation heating (2.45 GHz) at 90 Degree-Sign C in a short time (within 15 min). Scanning electron microscopy confirms that these films possess smooth surface morphology with fully coalesced grains. In addition, photoluminescence (PL) measurements exhibit strong ultraviolet emission at room temperature, indicating potential applications for short-wave light-emitting photonic devices. The PL properties were improved by a thermal annealing process without generating structural defects. Hall measurements after thermal treatment show the carrier concentration to be of the order of 10{sup 19} cm{sup -3} which is comparable to those grown by conventional solution methods. The MAH method will offer a rapid route to synthesize epitaxial ZnO films with good optical and electrical properties for various applications. - Graphical abstract: FESEM images showing the morphology and cross sectional view of ZnO films grown using microwave assisted hydrothermal method at 90 Degree-Sign C for 30 min. Highlights: Black-Right-Pointing-Pointer Microwave Assisted Hydrothermal (MAH) method was introduced to synthesize epitaxial ZnO films. Black-Right-Pointing-Pointer The films possess smooth surface morphology, fully coalesced grains with high optical properties. Black-Right-Pointing-Pointer It exhibit good electrical properties (carrier concentration 10{sup 19} cm{sup -3}, mobility 19 cm{sup 2}/Vs).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influences of doping Cr/Fe/Ta on the performance of Ni/CeO{sub 2} catalyst under microwave irradiation in dry reforming of CH{sub 4}

The structure of Ni/CeO{sub 2} catalyst with doping of Cr, Fe and Ta was investigated with XRD, N{sub 2} physisorption, XPS and HRTEM and the catalytic activity of the catalysts under microwave irradiation in dry reforming of methane was tested in a microwave reactor. The results show that the introduction of Cr and Ta to Ni/CeO{sub 2} can enhance the interaction between Ni and the support/promoter and inhibit the enlargement of NiO particles during the synthesis. The CH{sub 4} conversions in dry reforming on the catalysts follow the order: Ni/CeO{sub 2}<2Fe–Ni<2Ta–Ni<2Cr–Ni. The superior performance of 2Ta–Ni and 2Cr–Ni may be attributed to the locally-heated Ni particles caused by the strong microwave absorption of the in-situ grown graphene attached on them under microwave irradiation. - Highlights: • The influences of doping Cr, Fe and Ta on Ni/CeO{sub 2} were investigated. • The catalytic performances before and after doping were investigated. • The in-situ grown graphene can promote the conversion of reactants.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of bulk stainless steel joints developed through microwave hybrid heating

Processing of metallic materials through microwave heating is a challenging area of research. In the present work, joining of stainless steel-316 to stainless steel-316 in the bulk form has been carried out by placing stainless steel-316 powder at the interface and through targeted heating using microwave hybrid heating. The trials were carried out in a multimode microwave applicator at a frequency of 2.45 GHz and power 900 W. The developed joints were characterized using X-ray diffraction, field emission scanning electron microscopy equipped with energy dispersive X-ray spectroscope and measurement of Vicker's microhardness, porosity and tensile strength. The X-ray diffraction spectrum of the developed joint shows the presence of chromium carbide, iron carbide and iron silicide phases that eventually contribute to enhancement of the microhardness of the joint. The scanning electron microscope micrographs confirm classical metallurgical bonding between the substrate and the interface (molten powder) layer; the epitaxial growth rate was observed adjacent to the fusion zone. The average observed Vicker's microhardness in the joint zone on the grain boundary was significantly higher than that inside the grains due to the presence of various hard phases at the grain boundaries. Evaluation of the tensile strength of the joints showed an average ultimate tensile strength of 425.0 MPa with an average elongation of 9.44%. - Highlights: • Joining of stainless steel (SS-316) plates using microwave hybrid heating • Epitaxial growth rate observed adjacent to the fusion zone of welded joint • The ultimate tensile strength of the order of 425.0 MPa with 9.44% elongation.

36 MATERIALS SCIENCE↗

Substrate effect on in-plane dielectric and microwave properties of Ba(Sn{sub 0.15}Ti{sub 0.85})O{sub 3} thin films

The microstructure and in-plane dielectric and microwave properties of Barium tin titanate Ba(Sn{sub 0.15}Ti{sub 0.85})O{sub 3} (BTS) thin films grown on (1 0 0) LaAlO{sub 3} and (1 0 0) MgO single-crystal substrates through sol-gel process were investigated. X-ray diffraction and field emission scanning electron microscopy were used to characterize crystal structure of phases and microstructure of the thin films, respectively. Microwave properties of the films were measured from 1 to 10 GHz by the interdigital capacitor configuration. The obvious differences in the dielectric and microwave properties are attributed to the stress in the films, which result from the lattice mismatch and difference in the thermal expansion coefficients between the film and substrates. This work clearly reveals the highly promising potential of BTS films for application in tunable microwave devices.

36 MATERIALS SCIENCE↗

Turning “on” and “off” nucleation and growth: Microwave assisted synthesis of CdS clusters and nanoparticles

Graphical abstract: Display Omitted Highlights: ► Cadmium acetate and DMSO were employed as ion precursors. ► New approach to controlled CdS nanoparticle synthesis. ► CdS clusters and nanoparticles synthesis achieved using microwave irradiation. ► Microwave irradiation turns on and off nanoparticle growth. ► The formation of clusters, embryos and nanoparticles studied with optical spectroscopy. -- Abstract: We report here on the formation of CdS NP from the microwave assisted reaction of Cd(CH{sub 3}CO{sub 2}){sub 2} with dimethylsulfoxide (DMSO). DMSO serves as the solvent and a controlled source of sulfide ions to form (CdS){sub 1≤n≤5} clusters at the early stages of the process. The clusters grow into CdS nanoparticles, with diameters that range from 1.6 nm up to over 250 nm, with microwave heating. The time dependence of the onset of light absorption and absorbance are consistent with a concurrent nucleation and growth processes. The formation of clusters and nuclei and their subsequent reactions is controlled by turning on and off the energy supply consistent with an energy barrier to the formation of CdS nanostructures.

36 MATERIALS SCIENCE↗

Large-scale and shape-controlled synthesis and characterization of nanorod-like nickel powders under microwave radiation

Graphical abstract: The nanorod-like pure nickel were fabricated via hydrothermal liquid phase reduction route under microwave irradiation with hydrazine hydrate as a reducing agent as well as polyvinyl alcohol as a dispersant and/or structure directing agent. The materials were characterized by XRD, SEM, EDS, HRTEM, and selected-area electron diffraction, etc. The lattice expansion for Ni powders was explained in detail. As-prepared Ni sample was of obvious shape anisotropy with length diameter ratio of 5. Magnetic measurements shown that the magnetic properties of Ni nanorod-like (fcc) were quite different from those of hexagonal closed-packed (hcp) Ni nanoparticles. Highlights: Black-Right-Pointing-Pointer The synthesis of nanorod-like nickel under microwave irradiation. Black-Right-Pointing-Pointer Nitrogen generated in reaction as a shielding gas. Black-Right-Pointing-Pointer The lattice expansion for Ni powders was explained in detail. Black-Right-Pointing-Pointer Magnetic properties of Ni were quite different from those of Ni nanoparticles. -- Abstract: The nanorod-like nickel powders were fabricated via hydrothermal liquid phase reduction route under microwave irradiation with hydrazine hydrate as a reducing agent as well as polyvinyl alcohol as a dispersant and/or structure directing agent. The morphology and structure of as-prepared products could be easily tuned by adjusting process parameters such as pH value and microwave irradiation time. The resulting materials were characterized by X-ray diffraction (XRD), scanning electron microscope, transmission electron microscopy and selected-area electron diffraction (SAED). The results demonstrated that pure nickel powders with face-centered cubic (fcc) structure were prepared at relatively mild condition and no characteristic peaks of nickel oxide in the XRD pattern were found. The phenomenon of lattice expansion for Ni powders was explained in details according to the XRD theory. As-prepared Ni sample was of obvious shape anisotropy with length diameter ratio of 5. Magnetic measurements shown that the magnetic properties of nanorod-like (fcc) Ni powders were quite different from those of hexagonal closed-packed (hcp) Ni nanoparticles. Furthermore, it had more strong ferromagnetic properties than that of Ni powders both bulk and nanoparticles.

36 MATERIALS SCIENCE↗

Microwave-polyol controlled synthesis and magnetic properties of monodisperse Co{sub x}Ni{sub 1−x}Fe{sub 2}O{sub 4}/MWCNT nanocomposites

Graphical abstract: - Highlights: • Microwave-polyol preparation of monodisperse Co{sub x}Ni{sub 1−x}Fe{sub 2}O{sub 4}/MWCNT nanocomposites. • The composition is controlled through adjusting atomic ratios of Co and Ni salts. • Ms increases with increasing Co content. Hc is zero exhibiting superparamagnetic. - Abstract: Monodisperse Co{sub x}Ni{sub 1−x}Fe{sub 2}O{sub 4} nanoparticles (x = 0, 0.2, 0.4, 0.5, 0.6, 0.8, and 1) with controllable composition attached on the multi-walled carbon nanotubes (MWCNTs) were prepared by microwave-polyol method. The composition of Co{sub x}Ni{sub 1−x}Fe{sub 2}O{sub 4} nanoparticles can be controlled through adjusting the atomic ratios of cobalt and nickel nitrate in the mixed solution. The influence of the microwave power and microwave irradiation time on the monodispersion of nanoparticles was also investigated. The results show quasi-spherical Co{sub x}Ni{sub 1−x}Fe{sub 2}O{sub 4} nanoparticles with the face-centered cubic structure and average crystallite size (6 nm) are uniformly dispersed on MWCNTs. The saturation magnetization of Co{sub x}Ni{sub 1−x}Fe{sub 2}O{sub 4}/MWCNT nanocomposites increases gradually from 12.90 to 20.03 emu/g with increasing Co{sup 2+} concentration. The coercivity is almost zero at room temperature, which indicates the superparamagnetic behavior.

36 MATERIALS SCIENCE↗

Microwave heating synthesis and formation mechanism of chalcopyrite structured CuInS{sub 2} nanorods in deep eutectic solvent

Graphical abstract: Chalcopyrite structured CuInS{sub 2} nanorods were synthesized by an environmentally friendly microwave heating method in deep eutectic solvent. Results show that microwave heating time plays an important role in the formation of CuInS{sub 2} nanostructure phase. The SEM results indicated that the obtained CuInS{sub 2} nanostructures display rod-like morphology with diameters of about 40 nm and lengths of about 400 nm. The UV–vis spectrum results indicated that the CuInS{sub 2} nanorods exhibit strong absorption from the entire visible light region to the near-infrared region beyond 1100 nm. The possible growth mechanism of CuInS{sub 2} nanorods was discussed. - Abstract: Chalcopyrite structured CuInS{sub 2} nanorods were synthesized by an environmentally friendly microwave heating method in deep eutectic solvent. The as-synthesized CuInS{sub 2} nanorods were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS), respectively. The results indicated that the obtained CuInS{sub 2} nanostructures display rod-like morphology with diameters of about 40 nm and lengths of about 400 nm. The influences of microwave heating time on the formation of CuInS{sub 2} phase were discussed. Ultraviolet–visible (UV–vis) and photoluminescence (PL) spectra were utilized to investigate the optical properties of CuInS{sub 2} nanorods. The results showed that the as-synthesized CuInS{sub 2} nanorods exhibit strong absorption from the entire visible light region to the near-infrared region beyond 1100 nm. PL spectrum of the as-synthesized CuInS{sub 2} nanorods displays an emission peak centered at 580 nm under excitation wavelength of 366 nm at room temperature. The possible growth mechanism of CuInS{sub 2} nanorods was discussed.

36 MATERIALS SCIENCE↗

A study of thermal properties of sodium titanate nanotubes synthesized by microwave-assisted hydrothermal method

Highlights: • The microwave-assisted hydrothermal route was used for titanate nanotubes synthesis. • Conversion to single-phase nanotube morphology completes after 8 h reaction time. • The nanotube morphology is stable up to 600 °C, as determined by in-situ XRD and SEM. • Sodium ions migrate to the surface due to thermal motion and structure condensation. - Abstract: Sodium titanate nanotubes (NaTiNTs) were synthesized by microwave-assisted hydrothermal treatment of commercial TiO{sub 2}, at constant temperature (135 °C) and different irradiation times (15 min, 1, 4, 8 and 16 h). The products were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, differential scanning calorimetry and specific surface area measurements. The irradiation time turned out to be the key parameter for morphological control of the material. Nanotubes were observed already after 15 min of microwave irradiation. The analyses of the products irradiated for 8 and 16 h confirm the complete transformation of the starting TiO{sub 2} powder to NaTiNTs. The nanotubes are open ended with multi-wall structures, with the average outer diameter of 8 nm and specific surface area up to 210 m{sup 2}/g. The morphology, surface area and crystal structure of the sodium titanate nanotubes synthesized by microwave-assisted hydrothermal method were similar to those obtained by conventional hydrothermal method.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Influence of multi-walled carbon nanotubes (MWCNTs) volume percentage on the magnetic and microwave absorbing properties of BaMg{sub 0.5}Co{sub 0.5}TiFe{sub 10}O{sub 19}/MWCNTs nanocomposites

Graphical abstract: Reflection losses of (a) doped barium hexaferrite, BaMg{sub 0.5}Co{sub 0.5}TiFe{sub 10}O{sub 19}, sample and their nanocomposites with (b) 4 vol. (c) 8 vol. and (d) 12 vol.% of MWCNTs are presented. - Highlights: • BaMg{sub 0.5}Co{sub 0.5}TiFe{sub 10}O{sub 19}/MWCNTs nanocomposites were synthesized. • The structural, magnetic and microwave absorption properties were investigated. • The microwave absorption is strongly influenced by volume percentage of MWCNTs. • The nanocomposite with 8 vol.% of MWCNTs can be proposed as a wideband absorber. - Abstract: In this study BaMg{sub 0.5}Co{sub 0.5}TiFe{sub 10}O{sub 19}/MWCNTs nanocomposites with different amount of MWCNTs (0, 4, 8 and 12 vol.%) were synthesized. Here, the X-ray diffraction (XRD), Fourier transform spectroscopy (FTIR) and scanning electron microscopy (SEM) were used to demonstrate the structural and morphological characteristics of the prepared samples. XRD along with FTIR examinations exhibited that the nanocomposites were successfully synthesized. Vibrating sample magnetometer (VSM) showed the relatively strong dependence of saturation magnetization and coercivity on the volume percentage of MWCNTs. The microwave evaluation also confirmed that the complex permittivity of nanocomposites could be enhanced by adding MWCNTs. Finally, the nanocomposite with 8% vol. of MWCNTs exhibited the best microwave absorption performance among the samples.

36 MATERIALS SCIENCE↗

Self-assembly of silica nanoparticles into hollow spheres via a microwave-assisted aerosol process

Highlights: • The silica hollow spheres were fabricated via a microwave-assisted aerosol process. • The formation of the hollow spheres was obtained through a one-step process. • The spheres indicated the remarkable sustained release of potassium persulfate. - Abstract: In this work, a simple and efficient strategy for fabrication of silica hollow spheres (SHSs) has been successfully introduced with a one-step microwave-assisted aerosol process using silica nanoparticles (SiO{sub 2}, 12–50 nm) and NH{sub 4}HCO{sub 3} as precursor materials. This approach combines the merits of microwave radiation and the aerosol technique. And the formation of SHSs is ascribed to solvent evaporation and the as-generated gas from NH{sub 4}HCO{sub 3} decomposition in the microwave reactor. The morphology of the SHSs can be easily tuned by varying the residence time, amount of NH{sub 4}HCO{sub 3} and silica sources. The formation mechanism of SHSs was also investigated by structure analysis. In addition, the hollow spheres exhibited remarkable sustained release of potassium persulfate, by loading it into the porous structures. The results provide new sights into the fabrication of inorganic hollow spheres via a one-step process.

36 MATERIALS SCIENCE↗

Facile synthesis of fusiform layered oxides assisted by microwave as cathode material for lithium-ion batteries

Graphical abstract: Fusiform layered oxides synthesized by microwave solvothermal reaction with excellent electrochemical property as cathode material for lithium-ion batteries. - Highlights: • LiMn{sub 0.25}Ni{sub 0.5}Co{sub 0.25}O{sub 2} is obtained by microwave solvothermal reaction. • Material synthesized at 800 °C exhibits fusiform hierarchical morphology. • High initial discharge capacity of 183 mAh g{sup −1} is reached at 0.1C. • 154 mAh g{sup −1} is remained with a capacity retention of 84.2% after 100 cycles. • Excellent rate capability is also obtained. - Abstract: A facile microwave solvothermal reaction is performed to synthesize novel LiMn{sub 0.25}Ni{sub 0.5}Co{sub 0.25}O{sub 2} ternary layered oxide with 1 D fusiform morphology. Scanning electron microscopy (SEM) images show that material synthesized at 800 °C well keeps the fusiform morphology of the precursor with a particle size of 100–300 nm. All the three elements are perfectly dispersed and a well-formed layered structure is obtained. Thus, good electrochemical performances with high initial discharge capacity of 183 mAh g{sup −1} is reached. Furthermore, high discharge capacity of 154 mAh g{sup −1} is remained with a capacity retention of 84.2% after 100 cycles at 20 mA g{sup −1}. Excellent rate capability is also obtained with high discharge capacity of 99 mAh g{sup −1} at 2000 mA g{sup −1}. It seems such facile microwave solvothermal method is one of the most promising candidates for preparing ternary layered oxides with excellent electrochemical properties as cathode material for lithium ion batteries.

36 MATERIALS SCIENCE↗

Synthesis and microwave dielectric characteristics of high-Q Li2MgxTiO3+x ceramics system

Highlights: • A laminated sintering technique was adopted to prevent lithium volatilization. • The sintering behavior and microwave dielectric properties of Li{sub 2}Mg{sub x}TiO{sub 3+x} (2.2 ≤ x ≤ 4) ceramics were investigated. • The Li{sub 2}Mg{sub 3.6}TiO{sub 6.6} ceramics had excellent microwave dielectric properties of ε{sub r} ∼ 12.7, Q × f ∼ 169,000 GHz, τ{sub f} ∼ −32.8 ppm/°C. - Abstract: High-Q Li{sub 2}Mg{sub x}TiO{sub 3+x} (2.2 ≤ x ≤ 4) microwave dielectric ceramics were fabricated by using a conventional solid-state reaction method followed by laminated sintering technique. All samples showed clear and smooth grains through this sintering method. The XRD patterns indicated that Li{sub 2}Mg{sub x}TiO{sub 3+x} (2.2 ≤ x ≤ 4) ceramics displayed MgO-like cubic phase with ordered rock salt structure. The dielectric constant decreased monotonically because the molar volume expanded and molecular polarizability decreased when x values increased. The Q × f values of Li{sub 2}Mg{sub x}TiO{sub 3+x} (2.2 ≤ x ≤ 4) ceramics were dependent significantly on both average grain sizes and packing fraction. The Li{sub 2}Mg{sub 3.6}TiO{sub 6.6} ceramics sintered at 1375 °C had excellent microwave dielectric properties of ε{sub r} ∼ 12.7, Q × f ∼ 169,000 GHz, τ{sub f} ∼ −32.8 ppm/°C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crystal structure, Raman spectra, infrared spectra and microwave dielectric properties of Li2Mg3Ti1-X(Mg1/3Ta2/3)XO6 (0 ≤ x ≤ 0.2) solid solution ceramics

Highlights: • Microwave properties of ε{sub r} = 14.70, Q·f = 200,600 GHz and τ{sub f} = −11.83 ppm/°C were obtained. • A small amount of (Mg{sub 1/3}Ta{sub 2/3}){sup 4+} can obviously improve properties. • Rietveld refinement and spectra were used to analyze properties. • Relationships between intrinsic parameters and properties were established. - Abstract: Li{sub 2}Mg{sub 3}Ti{sub 1-X}(Mg{sub 1/3}Ta{sub 2/3}){sub X}O{sub 6} (x = 0.00, 0.05, 0.10, 0.15, 0.20) solid solution ceramics were prepared by the conventional solid-state reaction method. Rietveld refinements, Raman spectra, infrared spectra, polarizability and bond energy were used to research the changes of microwave dielectric properties of these solid solutions. With the increase of x values from 0 to 0.2, dielectric constants (ε{sub r}) gradually increased, which could be explained by the variations of the polarizability, infrared resonant modes and Raman vibration modes. The variations of the quality factor (Q·f) could be explained by the changes of the bond valences. The temperature coefficient of resonant frequency (τ{sub ƒ}) correlated with the bond energy of TiO bonds. A small quantity of (Mg{sub 1/3}Ta{sub 2/3}){sup 4+} can obviously improve the microwave dielectric properties. Excellent microwave dielectric properties of ε{sub r} = 14.70, Q·f = 200,600 GHz and τ{sub f} = −11.83 ppm/°C were obtained for Li{sub 2}Mg{sub 3}Ti{sub 0.95}(Mg{sub 1/3}Ta{sub 2/3}){sub 0.05}O{sub 6} ceramic sintered at 1550 °C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Natural garnet reinforced high density polyethylene composites for sustainable microwave substrates

Highlights: • A cost effective and ecofriendly alternative for commercial microwave substrates based on HDPE and Garnet mineral is proposed. • AFM images indicated the surface roughness of the substrate is very low and has the required degree of surface finish to minimize conduction loss. • Composite with 0.5 vol fraction of Garnet has ε{sub r} = 5.7, tan δ = 0.00185 (at 5 GHz), CTE = 114 ppm/{sup o}C and thermal conductivity = 1.3 Wm{sup −1}K{sup −1}. • The moisture absorption and thermal stability of dielectric properties are in the acceptable range for microwave substrate applications. - Abstract: A cost effective and ecofriendly alternative for commercially available microwave substrates is proposed in the present study. A polymer composite based on high-density polyethylene (HDPE) filled with garnet mineral was fabricated using sigma-blend technique with 0.1–0.5-volume fraction of filler. The atomic force microscopic images indicated the surface roughness of the substrate is very low and has the required degree of surface finish to avoid conduction loss. For 0.5 vol fraction of garnet, the composite showed a dielectric constant (ε{sub r}) = 5.7 and dielectric loss (tan δ) = 0.00185 at 5 GHz. Moreover, coefficient of thermal expansion (CTE), thermal conductivity (k{sub c}) and tensile strength are 114 ppm/{sup o}C, 1.3 Wm{sup −1}K{sup −1} and 14.3 MPa respectively for filler volume fraction, V{sub f} = 0.5. The dielectric, thermal, moisture absorption and mechanical properties indicate that the garnet/HDPE composites are ideal candidate for cost effective and sustainable microwave substrates.

36 MATERIALS SCIENCE↗

In-situ microwave-assisted heating synthesis of a high-performance g-C3N4/carbon nanotubes composite photocatalyst with good contact interfaces

Highlights: • One-pot microwave-assisted heating synthesis method prepared g-C{sub 3}N{sub 4} based CNTs composite photocatalyst. • Closely contact interfaces between g-C{sub 3}N{sub 4} and CNTs were prepared and observed. • WCN/CNTs exhibits a photocatalytic H{sub 2} evolution rate of 45.1 μmol/h, showing 10.02 folds of that for bulk g-C{sub 3}N{sub 4}. • WCN/CNTs exhibits a photocatalytic O{sub 2} evolution rate of 7.14 μmol/h, showing 4.61 folds of that for bulk g-C{sub 3}N{sub 4}. - Abstract: Herein, a one-pot microwave-assisted heating synthesis route was explored to prepare a g-C{sub 3}N{sub 4} based composite photocatalyst, which involved just treating of a mixture consisting of dicyandiamide and multi-walled carbon nanotubes (CNTs) using a microwave oven. The composite photocatalyst prepared by this route exhibits closely contact interfaces between g-C{sub 3}N{sub 4} and CNTs, as compared with the two ones obtained from the two-step and one-step methods previously reported, which lead to the reduced photoluminescence emission and longer lifetime of the photogenerated carriers, and the increased photocurrent response. As a result, the hydrogen evolution and oxygen evolution rates of the WCN/CNTs composite are up to 45.1 μmol/h and 7.14 μmol/h, 10.02 and 4.61 times that of BCN, respectively, which are higher than those of the other two ones prepared by the previously reported methods. This one-pot microwave-assisted heating synthesis route is suitable for preparing the g-C{sub 3}N{sub 4} based composite photocatalysts.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Impacts of microwave pretreatments on the semi-continuous anaerobic digestion of dairy waste activated sludge

Highlights: ► Microwave pretreatment of dairy WAS was studied. ► MW pretreatment at 70% intensity for 12 min, COD solubilization was 18.6%. ► Biogas production and SS reduction was 35% and 14% higher than control. ► In digester at 15 days SRT with medium OLR, SS and VS reduction was 67% and 64%. ► Biogas and methane production was 57% and 49% higher than control, in digesters. - Abstract: Microwave (MW) irradiation is one of the new and possible methods used for pretreating the sludge. Following its use in different fields, this MW irradiation method has proved to be more appropriate in the field of environmental research. In this paper, we focused on the effects of MW irradiation at different intensities on solubilization, biodegradation and anaerobic digestion of sludge from the dairy sludge. The changes in the soluble fractions of the organic matter, the biogas yield, the methane content in the biogas were used as control parameters for evaluating the efficiency of the MW pretreatment. Additionally, the energetic efficiency was also examined. In terms of an energetic aspect, the most economical pretreatment of sludge was at 70% intensity for 12 min irradiation time. At this, COD solubilization, SS reduction and biogas production were found to be 18.6%, 14% and 35% higher than the control, respectively. Not only the increase in biogas production was investigated, excluding protein and carbohydrate hydrolysis was also performed successfully by this microwave pretreatment even at low irradiation energy input. Also, experiments were carried out in semi continuous anaerobic digesters, with 3.5 L working volume. Combining microwave pretreatment with anaerobic digestion led to 67%, 64% and 57% of SS reduction, VS reduction and biogas production higher than the control, respectively.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗