Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MATRICES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Kindlin-3 mutation in mesenchymal stem cells results in enhanced chondrogenesis

Identifying patient mutations driving skeletal development disorders has driven our understanding of bone development. Integrin adhesion deficiency disease is caused by a Kindlin-3 (fermitin family member 3) mutation, and its inactivation results in bleeding disorders and osteopenia. In this study, we uncover a role for Kindlin-3 in the differentiation of bone marrow mesenchymal stem cells (BMSCs) down the chondrogenic lineage. Kindlin-3 expression increased with chondrogenic differentiation, similar to RUNX2. BMSCs isolated from a Kindlin-3 deficient patient expressed chondrocyte markers, including SOX9, under basal conditions, which were further enhanced with chondrogenic differentiation. Rescue of integrin activation by a constitutively activated β{sub 3} integrin construct increased adhesion to multiple extracellular matrices and reduced SOX9 expression to basal levels. Growth plates from mice expressing a mutated Kindlin-3 with the integrin binding site ablated demonstrated alterations in chondrocyte maturation similar to that seen with the human Kindlin-3 deficient BMSCs. These findings suggest that Kindlin-3 expression mirrors RUNX2 during chondrogenesis.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Phenotypical modifications of immune cells are enhanced by extracellular matrix

Immune cells not only constitute tumour microenvironment but they may even affect disease prognosis as a result of dual functional roles that they may play in tumour tissues. Two frequently used established immune cell lines (lymphocytic Jurkat and monocytic THP-1) were used to test whether microenvironmental factors, especially molecular components of extracellular matrix, can shape the phenotype of immune cells. Proliferation, morphological and phenotypical analyses were applied to compare behaviour of the immune cells, typically cultured as suspensions in culture medium, with their behaviour in collagen type I-based and Matrigel-based 3D cultures. Density of both immune cell types in routine suspension cultures affected their subsequent proliferation in extracellular matrices. THP-1 cells appeared to be more sensitive to their surrounding microenvironment as judged from extracellular matrix type-dependent changes in their cell doubling times and from slight increase in their diameters in both extracellular matrix-containing cell cultures. Moreover, even chemically uninduced monocytic THP-1 cells were present in a minor fraction as CD68 positive cell population in collagen type I matrix indicating their partial differentiation to macrophages. Observed modifications of immune cells by microenvironmental factors may have profound implications for their roles in healthy and pathological tissues.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

Bayesian-based response expansion and uncertainty quantification using sparse measurement sets

Systems subjected to dynamic loads often require monitoring of their vibrational response, but limitations on the total number and placement of the measurement sensors can hinder the data-collection process. Here, we present an indirect approach to estimate a system’s full-field dynamic response, including all uninstrumented locations, using response measurements from sensors sparsely located on the system. This approach relies on Bayesian inference that utilizes a system model to estimate the full-field response and quantify the uncertainty in these estimates. By casting the estimation problem in the frequency domain, this approach utilizes the modal frequency response functions as a natural, frequency-dependent weighting scheme for the system mode shapes to perform the expansion. This frequency-dependent weighting scheme enables an accurate expansion, even with highly correlated mode shapes that may arise from spatial aliasing due to the limited number of sensors, provided these correlated modes do not have natural frequencies that are closely spaced. Furthermore, the inherent regularization mechanism that arises in this Bayesian-based procedure enables the utilization of the full set of system mode shapes for the expansion, rather than any reduced subset. This approach can produce estimates when considering a single realization of the measured responses, and with some modification, it can also produce estimates for power spectral density matrices measured from many realizations of the responses from statistically stationary random processes. A simply supported beam provides an initial numerical validation, and a cylindrical test article excited by acoustic loads in a reverberation chamber provides experimental validation.

42 ENGINEERING↗
DOE OSTI2026

Pareto-optimal target definition for multi-axis random vibration testing

In random vibration testing with multiple control channels, existing control laws require specification of a complete spectral density matrix at each control frequency. Spectral density matrices include autospectral densities on the diagonal and cross-spectral densities on the off-diagonal. In practice, the off-diagonal terms are often unknown, and recent vibration testing research has focused on fixing the diagonal and specifying the off-diagonal to minimize the required control energy, subject to a constraint that the target matrix is positive semidefinite. This paper shows that, even with a fixed diagonal, off-diagonal terms strongly affect control residuals. This overlooked effect occurs in both square and rectangular systems. By jointly considering input energy and control residuals, open-loop inputs are derived directly from the diagonal without specifying the off-diagonal terms. Vibration targets that can be used in closed-loop control are then derived using the optimal inputs, with positive semidefinite constraints applied during the derivation. The result is a set of Pareto-optimal control solutions. For each solution in the set, any other possible solution produces greater control error, greater input energy, or both. A balanced solution is selected automatically, though others can be chosen based on test needs. Simulations and experiments show that the proposed method outperforms state-of-the-art energy-minimizing approaches, achieving significant reductions in both control error and input energy.

Autospectral density↗
DOE OSTI2025

Accurate models of the added mass force of a uniform random distribution of spherical particles or bubbles

The added mass force resulting from the acceleration of a body in a fluid is of fundamental and practical interest in dispersed multiphase flows. Euler–Lagrange (EL) and Euler–Euler (EE) simulations require closure terms for the added mass force in order to accurately couple the conserved variables between phases. Presently, a more thorough understanding of the added mass force in a multi-particle system is developed based on potential flow resulting in a resistance matrix formulation analogous to Stokesian dynamics. This formulation is then used to generate a dataset of added mass resistance matrices for large systems of randomly generated particles. This methodology is used to create a volume fraction corrected binary model for predicting the added mass force in large systems as well as generate statistics of the added mass force in such systems. This work provides clarification to the theory of the added mass force for particle clouds, and modelling options that may be implemented in existing EL and EE codes.

42 ENGINEERING↗
DOE OSTI2020

Electrochemical Detection of Oxycodone and Its Main Metabolites with Nafion-Coated Single-Walled Carbon Nanotube Electrodes

Oxycodone is a strong opioid frequently used as an analgesic. Although proven efficacious in the management of moderate to severe acute pain and cancer pain, use of oxycodone imposes a risk of adverse effects such as addiction, overdose, and death. Fast and accurate determination of oxycodone blood concentration would enable personalized dosing and monitoring of the analgesic as well as quick diagnostics of possible overdose in emergency care. However, in addition to the parent drug, several metabolites are always present in the blood after a dose of oxycodone, and to date, there is no electrochemical data available on any of these metabolites. In this paper, a single-walled carbon nanotube (SWCNT) electrode and a Nafion-coated SWCNT electrode were used, for the first time, to study the electrochemical behavior of oxycodone and its two main metabolites, noroxycodone and oxymorphone. Both electrode types could selectively detect oxycodone in the presence of noroxycodone and oxymorphone. However, we have previously shown that addition of a Nafion coating on top of the SWCNT electrode is essential for direct measurements in complex biological matrices. Therefore, in this work, the Nafion/SWCNT electrode was further characterized and used for measuring clinically relevant concentrations of oxycodone in buffer solution. The limit of detection for oxycodone with the Nafion/SWCNT sensor was 85 nM, and the linear range was 0.5–10 μM in buffer solution. Furthermore, this study shows that the fabricated Nafion/SWCNT sensor has potential to be applied in clinical concentration measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Evaluating the Utility of Permethylated Polysaccharide Solution NMR Data for Characterization of Insoluble Plant Cell Wall Polysaccharides

Plant cell wall polysaccharide analysis encompasses the utilization of a variety of analytical tools, including gas and liquid chromatography, mass spectrometry (MS), and nuclear magnetic resonance (NMR) spectroscopy. These methods provide complementary data, which enable confident structural proposals of the many complex polysaccharide structures that exist in the complex matrices of plant cell walls. However, cell walls contain fractions of varying solubilities, and a few techniques are available that can analyze all fractions simultaneously. We have discovered that permethylation affords the complete dissolution of both soluble and insoluble polysaccharide fractions of plant cell walls in organic solvents such as chloroform or acetonitrile, which can then be analyzed by a number of analytical techniques including MS and NMR. In this work, NMR structure analysis of 10 permethylated polysaccharide standards was undertaken to generate chemical shift data providing insights into spectral changes that result from permethylation of polysaccharide residues. This information is of especial relevance to the structure analysis of insoluble polysaccharide materials that otherwise are not easily investigated by solution-state NMR methodologies. The preassigned NMR chemical shift data is shown to be vital for NMR structure analysis of minor polysaccharide components of plant cell walls that are particularly difficult to assign by NMR correlation data alone. With the assigned chemical shift data, we analyzed the permethylated samples of destarched, alcohol-insoluble residues of switchgrass and poplar by two-dimensional NMR spectral profiling. Thus, we identified, in addition to the major polysaccharide components, two minor polysaccharides, namely, <5% 3-linked arabinoxylan (switchgrass) and <2% glucomannan (poplar). In particular, the position of the arabinose residue in the arabinoxylan of the switchgrass sample was confidently assigned based on chemical shift values, which are highly sensitive to local chemical environments. Furthermore, the high resolution afforded by the 1H NMR spectra of the permethylated switchgrass and poplar samples allowed facile relative quantitative analysis of their polysaccharide composition, utilizing only a few milligrams of the cell wall material. As a result, the concepts herein developed will thus facilitate NMR structure analysis of insoluble plant cell wall polysaccharides, more so of minor cell wall components that are especially challenging to analyze with current methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

A Trapping-Micro-LC-FAIMS/dCV-MS Strategy for Ultrasensitive and Robust Targeted Quantification of Protein Drugs and Biomarkers

The sensitivity of LC-MS in quantifying target proteins in plasma/tissues is significantly hindered by co-eluted matrix interferences. While antibody-based immuno-enrichment effectively reduces interferences, developing and optimizing antibodies are often time-consuming and costly. Here, in this study, by leveraging the orthogonal separation capability of Field Asymmetric Ion Mobility Spectrometry (FAIMS), we developed a FAIMS/differential-compensation-voltage (FAIMS/dCV) method for antibody-free, robust, and ultra-sensitive quantification of target proteins directly from plasma/tissue digests. By comparing the intensity-CV profiles of the target vs. co-eluted endogenous interferences, the FAIMS/dCV approach identifies the optimal CV for quantification of each target protein, thus maximizing the signal-to-noise ratio (S/N). Compared to quantification without FAIMS, this technique dramatically reduces endogenous interferences, showing a median improvement of the S/N by 14.8-fold for the quantification of 17 representative protein drugs and biomarkers in plasma or tissues and a 5.2-fold median increase in S/N over conventional FAIMS approach, which uses the peak CV of each target. We also discovered that the established CV parameters remain consistent over months and are matrix-independent, affirming the robustness of the developed FAIMS/dCV method and the transferability of the method across matrices. The developed method was successfully demonstrated in three applications: the quantification of monoclonal antibodies with sub-ng/mL LOQ in plasma, an investigation of the time courses of evolocumab and its target PCSK9 in a preclinical setting, and a clinical investigation of low abundance obesity-related biomarkers. This innovative and easy-to-use method has extensive potential in clinical and pharmaceutical research, particularly where sensitive and high-throughput quantification of protein drugs and biomarkers is required.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Enhancing Sensitivity in Targeted Single-Cell Proteomics by Coupling a Dual Ion Funnel Interface with Triple Quadrupole Mass Spectrometer

Single-cell proteomics (SCP) has emerged as a powerful approach for understanding cellular heterogeneity and biological processes at unprecedented resolution. However, the extremely limited protein content of individual cells (femtogram to picogram levels) pushes current mass spectrometry instrumentation to its sensitivity limits, creating a critical analytical bottleneck. While selected reaction monitoring (SRM) using triple quadrupole (QqQ) instruments 1 offers advantages in sensitivity and reproducibility for targeted proteomics quantification, SRM still struggles with sensitivity for quantification of moderate- or low-abundance proteins from single-cell sample amounts. Here, we report the development and systematic evaluation of a dual ion funnel interface designed to address the sensitivity limitation by significantly enhancing ion transmission efficiency in commercial QqQ mass spectrometers. The dual ion funnel interface, composed of a curved S-funnel followed by a conventional ion funnel, improves ion transmission efficiency while reducing chemical noise through selective ion focusing. The performance of the dual ion funnel interface was systematically compared to standard interface on a TSQ Vantage platform across samples with different levels of complexity. The dual funnel interface demonstrated to provide up to 25-fold improvement in sensitivity across a wide range of protein concentrations in different biological matrices (low complex mouse macrophage and high complex human cells). Critically, enhanced sensitivity was accompanied by increased analytical reproducibility with lower coefficient of variations. Most importantly, the dual funnel interface enabled reliable quantification of low-abundance proteins that were barely detectable or not detected by the standard interface, extending analysis to single-cell equivalent amounts while maintaining excellent reproducibility. These results demonstrate that the dual funnel interface addresses the critical bottleneck in quantitative targeted proteomics, providing a technological foundation for ultrasensitive targeted SCP that requires both high sensitivity and robust quantitative performance.

Min, Sehong↗
DOE OSTI2022

Heterogeneous M-N-C Catalysts for Aerobic Oxidation Reactions: Lessons from Oxygen Reduction Electrocatalysts

Nonprecious metal heterogeneous catalysts composed of first-row transition metals incorporated into nitrogen-doped carbon matrices (M-N-Cs) have been studied for decades as leading alternatives to Pt for the electrocatalytic O 2 reduction reaction (ORR). More recently, similar M-N-C catalysts have been shown to catalyze the aerobic oxidation of organic molecules. Here, this Focus Review highlights mechanistic similarities and distinctions between these two reaction classes and then surveys the aerobic oxidation reactions catalyzed by M-N-Cs. As the active-site structures and kinetic properties of M-N-C aerobic oxidation catalysts have not been extensively studied, the array of tools and methods used to characterize ORR catalysts are presented with the goal of supporting further advances in the field of aerobic oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Engineered Living Materials For Sustainability

Recent advances in synthetic biology and materials science have given rise to a new form of materials, namely engineered living materials (ELMs), which are composed of living matter or cell communities embedded in self-regenerating matrices of their own or artificial scaffolds. Like natural materials such as bone, wood, and skin, ELMs, which possess the functional capabilities of living organisms, can grow, self-organize, and self-repair when needed. They also spontaneously perform programmed biological functions upon sensing external cues. Currently, ELMs show promise for green energy production, bioremediation, disease treatment, and fabricating advanced smart materials. This review first introduces the dynamic features of natural living systems and their potential for developing novel materials. We then summarize the recent research progress on living materials and emerging design strategies from both synthetic biology and materials science perspectives. Lastly, we discuss the positive impacts of living materials on promoting sustainability and key future research directions.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Exploring the Role of Inorganic and Organic Interfaces on CO 2 and CH 4 Partitioning: Case Study of Silica, Illite, Calcite, and Kerogen Nanopores on Gas Adsorption and Nanoscale Transport Behaviors

The adsorption, partitioning, and diffusion of CO 2 and CH 4 in organic–inorganic pores composed of kerogen with silica, illite, or calcite are studied using density functional theory and classical molecular dynamics simulations. The adsorption and partitioning behavior of CO 2 and CH 4 molecules is found to be a function of chemistry of the solid interface, pore size, and surface area. CO 2 molecules are preferentially adsorbed compared to CH 4 molecules on silica, illite, calcite, and kerogen surfaces due to significant contributions of electrostatic interactions with the atoms of the associated surfaces. CO 2 and CH 4 molecules display higher adsorption energy on calcite and silica compared to those on illite and kerogen because of enhanced interactions with the positively charged calcium ions on the calcite surface and the hydroxyl group (-OH) on the silica surface. Enhanced internal nanopores and the availability of adsorption active sites in illite and kerogen matrices aid in higher partitioning of the gas molecules into these pores. CO 2 has a significant influence on the clustering and swelling of kerogen fragments compared to CH 4 . Higher CO 2 adsorption on inorganic and kerogen surfaces results in lower overall self-diffusivities compared to CH 4 . This study illustrates surface and pore size controls on the adsorption, partitioning, and self-diffusivities of CO 2 and CH 4 at conditions relevant for subsurface energy applications. The chemistry of the surfaces along with the availability of internal pores and active adsorption sites influences the adsorption behavior of gases. Our results suggest that CO 2 stored in depleted gas reservoirs may preferentially inhabit nanoconfined pores.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Reactive Transport Modeling of Shale–Fluid Interactions after Imbibition of Fracturing Fluids

Injection of hydraulic fracturing fluid (HFF) into shale formations for unconventional oil/gas production results in chemical reactions in the shale matrix. Our recent experimental study determined the depths to which different types of reactions between the shale matrix and the HFF extended. In the present study, we built continuum-scale reactive transport models to understand the coupling of chemical reactions and the transport of aqueous species in these shale–HFF systems. Calibration of the model with our previous experimental results reveals that it takes hours to months for the shale matrix to completely neutralize the imbibed acids, depending primarily upon the carbonate content of the shale. Both the HFF pH and pore pH affect the location of barite precipitation, resulting in unique barite precipitation profiles extending millimeters into calcite-rich Eagle Ford shale but only tens of micrometers into low-carbonate Marcellus shale. In addition, dissolved oxygen and extracted bitumen are key to reproducing the experimental observation of Fe(III) (oxyhydr)oxide formation in the shale matrix as a result of pyrite dissolution in the shales. A comparison between the modeling results of porosity in the present study to experimentally measured permeabilities in our previous study suggests that chemical reactions occurring at a greater depth than the observable reaction zone might have impacted permeability. Our model serves as a benchmark for efficiently modeling water–rock interactions in similar systems where bulk rock samples react with a solution in batch reactors. Important reactive transport processes were ascertained via modeling, which allows for quantitative prediction of shale–HFF interactions in shale matrices given the shale and HFF compositions.

58 GEOSCIENCES↗
DOE OSTI2022

Mercury Removal from Contaminated Water by Wood-Based Biochar Depends on Natural Organic Matter and Ionic Composition

Biochars can remove potentially toxic elements, such as inorganic mercury [Hg(II)] from contaminated waters. However, their performance in complex water matrices is rarely investigated, and the combined roles of natural organic matter (NOM) and ionic composition in the removal of Hg(II) by biochar remain unclear. Here, we investigate the influence of NOM and major ions such as chloride (Cl – ), nitrate (NO 3 – ), calcium (Ca 2+ ), and sodium (Na + ) on Hg(II) removal by a wood-based biochar (SWP700). Multiple sorption sites containing sulfur (S) were located within the porous SWP700. In the absence of NOM, Hg(II) removal was driven by these sites. Ca 2+ bridging was important in enhancing removal of negatively charged Hg(II)-chloro complexes. In the presence of NOM, formation of soluble Hg-NOM complexes (as seen from speciation calculations), which have limited access to biochar pores, suppressed Hg(II) removal, but Cl – and Ca 2+ could still facilitate it. The ability of Ca 2+ to aggregate NOM, including Hg-NOM complexes, promoted Hg(II) removal from the dissolved fraction (<0.45 μm). Hg(II) removal in the presence of Cl – followed a stepwise mechanism. Weakly bound oxygen functional groups in NOM were outcompeted by Cl – , forming smaller-sized Hg(II)-chloro complexes, which could access additional intraparticle sorption sites. Therein, Cl – was outcompeted by S, which finally immobilized Hg(II) in SWP700 as confirmed by extended X-ray absorption fine structure spectroscopy. We conclude that in NOM containing oxic waters, with relatively high molar ratios of Cl – : NOM and Ca 2+ : NOM, Hg(II) removal can still be effective with SWP700.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Design and Application of Materials for Sequestration and Immobilization of 99 Tc

99 Technetium ( 99 Tc) is a hazardous radionuclide generated by the nuclear industry that poses a serious environmental threat. The wide variation and complex chemistries of nuclear waste streams containing 99 Tc often create unique, site specific challenges when sequestering and immobilizing the waste in a matrix suitable for long-term storage and disposal. Therefore, an effective management plan for 99 Tc containing radioactive waste will likely require a variety of suitable materials/matrices capable of adapting to and addressing these challenges. In this review, we discuss and highlight the key developments for effective removal and immobilization of 99 Tc in inorganic waste forms. Specifically, we review the synthesis, characterization, and application of materials for targeted removal of 99 Tc from (simulated) waste solutions under various experimental conditions. These materials include: i) layered double hydroxides (LDHs), ii) metal-organic frameworks (MOFs), iii) ion-exchange resins (IERs) as well as cationic organic polymers (COPs), and iv) surface modified natural clay materials (SMCMs). Secondly, we discuss some of the major and recent developments towards 99 Tc immobilization in i) glass, ii) cement, and iii) iron mineral waste forms. Finally, we present future challenges that need to be addressed for the design, synthesis, and selection of suitable matrices for the efficient sequestration and immobilization of 99 Tc from targeted wastes. Finally, the purpose of this review is to inspire the researches on the design and application of various suitable materials/matrices for selective removal of 99 Tc present globally in different radioactive wastes and its immobilization in stable/durable waste forms.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Controls on Barite (BaSO 4 ) Precipitation in Unconventional Reservoirs

Barite (BaSO 4 ) precipitation is one of the most ubiquitous examples of secondary sulfate mineral scaling in shale oil and gas reservoirs. Often, a suite of chemical additives is used during fracturing operations to inhibit the accumulation of mineral scales, though their efficacy is widely varied and poorly understood. This study combines experimental data and multi-component numerical reactive transport modeling to offer a more comprehensive understanding of the geochemical behavior of barite accumulation in shale matrices under conditions typical of fracturing operations. A variety of additives and conditions are individually tested in batch reactor experiments to identify the factors controlling barite precipitation. Our experimental results demonstrate a pH dependence in the rate of barite precipitation, which we use to develop a predictive model including a pH-dependent term that satisfactorily reproduces our observations. Further, this model is then extended to consider the behavior of three major shale samples of highly variable mineralogy (Eagle Ford, Marcellus, and Barnett). This data-validated model offers a reliable tool to predict and ultimately mitigate against secondary mineral accumulation in unconventional shale reservoirs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Molecular Insights into Novel Struvite–Hydrogel Composites for Simultaneous Ammonia and Phosphate Removal

Struvite (NH 4 MgPO 4 ·6H 2 O) mineralization is an effective technique for removing ammonium and phosphate species from wastewater. However, its wider use faces obstacles because of the copresence of various pollutants in wastewater and the additional requirement for magnesium to achieve proper supersaturation conditions. To address these challenges, this study developed novel mineral–hydrogel composites that can remove ammonium and phosphate simultaneously via heterogeneous struvite and calcium phosphate (CaP) mineralization in hydrogel matrices. The composites include in situ formed struvite and CaP mineral seeds, decreasing the nucleation energy barrier of struvite and CaP formation and promoting their heterogeneous nucleation kinetics even under undersaturation conditions in bulk solution. The dual struvite and CaP seeded composites can simultaneously reduce the ammonium and total phosphate concentrations up to 60% (26.3 mg of N/g) and 91% (9.54 mg of P/g), respectively. Furthermore, the average particle sizes in composites were increased from 6.12 to 14.8 nm after wastewater treatment. Moreover, various ions commonly existing in wastewater did not significantly interfere with the removal of ammonium and phosphate. Thus, these new mineral–hydrogel composites can provide an innovative way to lower nutrient levels before discharge to streams. Moreover, encapsulating ammonium and phosphate in mineral-hydrogel composites enables their upcycling in agricultural or biorefinery applications.

Cations↗
DOE OSTI2023

Effect of Na Concentration on Cs Distribution with Crystalline Silicotitanate in Tank Waste Simulants

Crystalline silicotitanate (CST) ion exchange media is currently utilized in the tank side cesium removal (TSCR) system on the Hanford site to remove Cs-137 from the tank waste supernate. As the main dose contributor to the liquid supernate in Hanford tank waste, it is necessary to remove the Cs-137 to expedite low activity waste processing and immobilization. Ongoing batch contact experiments with CST have been done to tease out the impact of group II metals, anions, potassium, and temperature on Cs removal to better understand bounding conditions for operations as well as aid in development of a wholesome isotherm model to predict Cs behavior in the tank waste. This paper discusses the impact of Na concentration on Cs exchange and provides insight into the challenges associated with activity coefficient estimations for modeling Cs distribution in tank waste matrices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗