Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC CORES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

A KINETIC ALFVEN WAVE AND THE PROTON DISTRIBUTION FUNCTION IN THE FAST SOLAR WIND

Using one-dimensional test particle simulations, the effect of a kinetic Alfven wave on the velocity distribution function (VDF) of protons in the collisionless solar wind is investigated. We first use linear Vlasov theory to numerically obtain the property of a kinetic Alfven wave (the wave propagates in the direction almost perpendicular to the background magnetic field). We then numerically simulate how the wave will shape the proton VDF. It is found that Landau resonance may be able to generate two components in the initially Maxwellian proton VDF: a tenuous beam component along the direction of the background magnetic field and a core component. The streaming speed of the beam relative to the core proton component is about 1.2-1.3 Alfven speed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Transport of Protostellar Cosmic Rays in Turbulent Dense Cores

We report recent studies have suggested that low-energy cosmic rays (CRs) may be accelerated inside molecular clouds by the shocks associated with star formation. We use a Monte Carlo transport code to model the propagation of CRs accelerated by protostellar accretion shocks through protostellar cores. We calculate the CR attenuation and energy losses and compute the resulting flux and ionization rate as a function of both radial distance from the protostar and angular position. We show that protostellar cores have nonuniform CR fluxes that produce a broad range of CR ionization rates, with the maximum value being up to two orders of magnitude higher than the radial average at a given distance. In particular, the CR flux is focused in the direction of the outflow cavity, creating a "flashlight" effect and allowing CRs to leak out of the core. The radially averaged ionization rates are less than the measured value for the Milky Way of ζ ≈ 10 -16 s -1 ; however, within r ≈ 0.03 pc from the protostar, the maximum ionization rates exceed this value. We show that variation in the protostellar parameters, particularly in the accretion rate, may produce ionization rates that are a couple of orders of magnitude higher or lower than our fiducial values. Finally, we use a statistical method to model unresolved subgrid magnetic turbulence in the core. We show that turbulence modifies the CR spectrum and increases the uniformity of the CR distribution but does not significantly affect the resulting ionization rates.

79 ASTRONOMY AND ASTROPHYSICS↗

Compressing Magnetic Fields with High-Energy Lasers

Laser-driven magnetic-field compression producing a magnetic field of tens of megaGauss is reported for the first time. A shock wave formed during the implosion of a cylindrical target traps an initial (seed) magnetic field that is amplified via conservation of magnetic flux. Such large fields are expected to magnetize the electrons in the hot, central plasma, leading to a cyclotron frequency exceeding the collision frequency. The Omega Laser Facility [T. R. Boehly et al., Opt. Commun. 133, 495 (1997)] was used to implode cylindrical CH targets filled with deuterium gas and seeded with an external field (>50 kG) from a magnetic pulse generator. This seed field is trapped and rapidly compressed by the imploding shell, minimizing the effect of resistive flux diffusion. The compressed field was probed via proton deflectrometry using 14.7 MeV protons from the D+3He fusion reaction emitted by an imploding glass microballoon. Line-averaged magnetic fields of the imploded core were measured to between 30 and 40 MG. Experimental data were analyzed with both a magnetohydrodynamic version of the one-dimensional hydrocode LILAC [J. Delettrez et al., Phys. Rev. A 36, 3926 (1987); N. W. Jang et al., Bull. Am. Phys. Soc. 51, 144 (2006)] and the particle propagation code GEANT4 [S. Agostinelli et al., Nucl. Instrum. Methods Phys. Res. A 506, 250 (2003)].

Knauer, J P↗

FORMATION OF TURBULENT AND MAGNETIZED MOLECULAR CLOUDS VIA ACCRETION FLOWS OF H I CLOUDS

Using three-dimensional magnetohydrodynamic simulations, including the effects of radiative cooling/heating, chemical reactions, and thermal conduction, we investigate the formation of molecular clouds in the multi-phase interstellar medium. As suggested by recent observations, we consider the formation of molecular clouds due to accretion of H I clouds. Our simulations show that the initial H I medium is piled up behind the shock waves induced by accretion flows. Since the initial medium is highly inhomogeneous as a consequence of thermal instability, a newly formed molecular cloud becomes very turbulent owing to the development of the Richtmyer-Meshkov instability. The kinetic energy of the turbulence dominates the thermal, magnetic, and gravitational energies throughout the entire 10 Myr evolution. However, the kinetic energy measured using CO-fraction-weighted densities is comparable to the other energies, once the CO molecules are sufficiently formed as a result of UV shielding. This suggests that the true kinetic energy of turbulence in molecular clouds as a whole can be much larger than the kinetic energy of turbulence estimated using line widths of molecular emission. We find that clumps in a molecular cloud show the following statistically homogeneous evolution: the typical plasma {beta} of the clumps is roughly constant ({beta}) {approx_equal} 0.4; the size-velocity dispersion relation is {Delta}v {approx_equal} 1.5 km s{sup -1} (l/1 pc){sup 0.5}, irrespective of the density; the clumps evolve toward magnetically supercritical, gravitationally unstable cores; and the clumps seem to evolve into cores that satisfy the condition for fragmentation into binaries. These statistical properties may represent the initial conditions of star formation.

79 ASTRONOMY AND ASTROPHYSICS↗

Moving-mesh Simulations of Star-forming Cores in Magneto-gravo-turbulence

Star formation in our Galaxy occurs in molecular clouds that are self-gravitating, highly turbulent, and magnetized. We study the conditions under which cloud cores inherit large-scale magnetic field morphologies and how the field is governed by cloud turbulence. We present four moving-mesh simulations of supersonic, turbulent, isothermal, self-gravitating gas with a range of magnetic mean-field strengths characterized by the Alfvénic Mach number M{sub A,0}, resolving prestellar core formation from parsec to a few astronomical unit scales. In our simulations with the turbulent kinetic energy density dominating over magnetic pressure (M{sub A,0}>1), we find that the collapse is approximately isotropic with B ∝ ρ {sup 2/3}, core properties are similar regardless of initial mean-field strength, and the field direction on 100 au scales is uncorrelated with the mean field. However, in the case of a dominant large-scale magnetic field (M{sub A,0}=0.35), the collapse is anisotropic with B ∝ ρ {sup 1/2}. This transition at M{sub A,0}∼1 is not expected to be sharp, but clearly signifies two different paths for magnetic field evolution in star formation. Based on observations of different star-forming regions, we conclude that star formation in the interstellar medium may occur in both regimes. Magnetic field correlation with the mean field extends to smaller scales as M{sub A,0} decreases, making future Atacama Large Millimeter Array observations useful for constraining M{sub A,0} of the interstellar medium.

79 ASTRONOMY AND ASTROPHYSICS↗

Sausage instabilities on top of kinking lengthening current-carrying magnetic flux tubes

We theoretically explore the possibility of sausage instabilities developing on top of a kink instability in lengthening current-carrying magnetic flux tubes. Observations indicate that the dynamics of magnetic flux tubes in our cosmos and terrestrial experiments can involve topological changes faster than time scales predicted by resistive magnetohydrodynamics. Recent laboratory experiments suggest that hierarchies of instabilities, such as kink and Rayleigh-Taylor, could be responsible for initiating fast topological changes by locally accessing two-fluid and kinetic regimes. Sausage instabilities can also provide this coupling mechanism between disparate scales. Flux tube experiments can be classified by the flux tube's evolution in a configuration space described by a normalized inverse aspect-ratio $\bar{k}$ and current-to-magnetic flux ratio $\bar{λ}$. A lengthening current-carrying magnetic flux tube traverses this $\bar{k}$-$\bar{λ}$ space and crosses stability boundaries. We derive a single general criterion for the onset of the sausage and kink instabilities in idealized magnetic flux tubes with core and skin currents. The criterion indicates a dependence of the stability boundaries on current profiles and shows overlapping kink and sausage unstable regions in the $\bar{k}$-$\bar{λ}$ space with two free parameters. Finally, numerical investigation of the stability criterion reduces the number of free parameters to a single one that describes the current profile and confirms the overlapping sausage and kink unstable regions in $\bar{k}$-$\bar{λ}$ A lengthening, ideal current-carrying magnetic flux tube can therefore become sausage unstable after it becomes kink unstable.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

THE SUPER-ALFVENIC MODEL OF MOLECULAR CLOUDS: PREDICTIONS FOR MASS-TO-FLUX AND TURBULENT-TO-MAGNETIC ENERGY RATIOS

Recent measurements of the Zeeman effect in dark-cloud cores provide important tests for theories of cloud dynamics and prestellar core formation. In this Letter, we report results of simulated Zeeman measurements, based on radiative transfer calculations through a snapshot of a simulation of supersonic and super-Alfvenic turbulence. We have previously shown that the same simulation yields a relative mass-to-flux ratio (core versus envelope) in agreement with the observations (and in contradiction with the ambipolar-drift model of core formation). Here, we show that the mass-to-flux and turbulent-to-magnetic-energy ratios in the simulated cores agree with the observed values as well. The mean magnetic field strength in the simulation is very low, B-bar=0.34 {mu}G, presumably lower than the mean field in molecular clouds. Nonetheless, high magnetic field values are found in dense cores, in agreement with the observations (the rms field, amplified by the turbulence, is B{sub rms} = 3.05 {mu}G). We conclude that a strong large-scale mean magnetic field is not required by Zeeman effect measurements to date, although it is not ruled out by this work.

30 DIRECT ENERGY CONVERSION↗

Stability of superthermal strahl electrons in the solar wind

We present a kinetic stability analysis of the solar wind electron distribution function consisting of the Maxwellian core and the magnetic-field aligned strahl, a superthermal electron beam propagating away from the sun. We use an electron strahl distribution function obtained as a solution of a weakly collisional drift-kinetic equation, representative of a strahl affected by Coulomb collisions but unadulterated by possible broadening from turbulence. This distribution function is essentially non-Maxwellian and varies with the heliospheric distance. The stability analysis is performed with the Vlasov–Maxwell linear solver leopard. We find that depending on the heliospheric distance, the core-strahl electron distribution becomes unstable with respect to sunward-propagating kinetic-Alfvén, magnetosonic, and whistler modes, in a broad range of propagation angles. The wavenumbers of the unstable modes are close to the ion inertial scales, and the radial distances at which the instabilities first appear are on the order of 1 au. However, we have not detected any instabilities driven by resonant wave interactions with the superthermal strahl electrons. Instead, the observed instabilities are triggered by a relative drift between the electron and ion cores necessary to maintain zero electric current in the solar wind frame (ion frame). Contrary to strahl distributions modelled by shifted Maxwellians, the electron strahl obtained as a solution of the kinetic equation is stable. Our results are consistent with the previous studies based on a more restricted solution for the electron strahl.

79 ASTRONOMY AND ASTROPHYSICS↗

Structural Changes in Metal Chalcogenide Nanoclusters Associated with Single Heteroatom Incorporation

Atomically precise nanoclusters (NCs) are promising building blocks for designing materials and interfaces with unique properties. By incorporating heteroatoms into the core, the electronic and magnetic properties of NCs can be precisely tuned. To accurately predict these properties, density functional theory (DFT) is often employed, making the rigorous benchmarking of DFT results particularly important. In this study, we present a benchmarking approach based on metal chalcogenide NCs as a model system. We synthesized a series of bimetallic, iron-cobalt chalcogenide NCs [Co 6-x Fe x S 8 (PEt 3 ) 6 ] + (x = 0-6) (PEt = triethyl phosphine) and investigated the effect of heteroatoms in the octahedral metal chalcogenide core on their size and electronic properties. Using ion mobility-mass spectrometry (IM-MS), we observed a gradual increase in the collision cross section (CCS) with an increase in the number of Fe atoms in the core. DFT calculations combined with trajectory method CCS simulations successfully reproduced this trend, revealing that the increase in cluster size is primarily due to changes in metal-ligand bond lengths, while the electronic properties of the core remain largely unchanged. Moreover, this method allowed us to exclude certain multiplicity states of the NCs, as their CCS values were significantly different from those predicted for the lowest-energy structures. Here, this study demonstrates that gas-phase IM-MS is a powerful technique for detecting subtle size differences in atomically precise NCs, which are often challenging to observe using conventional NC characterization methods. Accurate CCS measurements are established as a benchmark for comparison with theoretical calculations. The excellent correspondence between experimental data and theoretical predictions establishes a robust foundation for investigating structural changes of transition metal NCs of interest to a broad range of applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Radial and poloidal correlation reflectometry on Experimental Advanced Superconducting Tokamak

An X-mode polarized V band (50 GHz–75 GHz) radial and poloidal correlation reflectometry is designed and installed on Experimental Advanced Superconducting Tokamak (EAST). Two frequency synthesizers (12 GHz–19 GHz) are used as sources. Signals from the sources are up-converted to V band using active quadruplers and then coupled together for launching through one single pyramidal antenna. Two poloidally separated antennae are installed to receive the reflected waves from plasma. This reflectometry system can be used for radial and poloidal correlation measurement of the electron density fluctuation. In ohmically heated plasma, the radial correlation length is about 1.5 cm measured by the system. The poloidal correlation analysis provides a means to estimate the fluctuation velocity perpendicular to the main magnetic field. In the present paper, the distance between two poloidal probing points is calculated with ray-tracing code and the propagation time is deduced from cross-phase spectrum. Fluctuation velocity perpendicular to the main magnetic field in the core of ohmically heated plasma is about from −1 km/s to −3 km/s.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

IN-SYNC. II. VIRIAL STARS FROM SUBVIRIAL CORES—THE VELOCITY DISPERSION OF EMBEDDED PRE-MAIN-SEQUENCE STARS IN NGC 1333

The initial velocity dispersion of newborn stars is a major unconstrained aspect of star formation theory. Using near-infrared spectra obtained with the APOGEE spectrograph, we show that the velocity dispersion of young (1-2 Myr) stars in NGC 1333 is 0.92 ± 0.12 km s{sup –1} after correcting for measurement uncertainties and the effect of binaries. This velocity dispersion is consistent with the virial velocity of the region and the diffuse gas velocity dispersion, but significantly larger than the velocity dispersion of the dense, star-forming cores, which have a subvirial velocity dispersion of 0.5 km s{sup –1}. Since the NGC 1333 cluster is dynamically young and deeply embedded, this measurement provides a strong constraint on the initial velocity dispersion of newly formed stars. We propose that the difference in velocity dispersion between stars and dense cores may be due to the influence of a 70 μG magnetic field acting on the dense cores or be the signature of a cluster with initial substructure undergoing global collapse.

79 ASTRONOMY AND ASTROPHYSICS↗

Lorentz electron ptychography for imaging magnetic textures beyond the diffraction limit

Nanoscale spin textures, especially magnetic skyrmions, have attracted intense interest as candidate high-density and power-efficient information carriers for spintronic devices. Facilitating a deeper understanding of sub-100 nm to atomic-scale spin textures requires more advanced magnetic imaging techniques. Here, we demonstrate a Lorentz electron ptychography (LEP) method which can enable high-resolution, high-sensitivity magnetic field imaging for widely-available electron microscopes. The resolution of LEP is not limited by the usual diffraction limit of the lens optics, but instead is determined by the maximum scattering angle at which a statistically meaningful dose can still be recorded – this can be an improvement of up to 2 to 6 times depending on the allowable dose. Using FeGe as a model system, we realize a more accurate magnetic field measurement of skyrmions with an improved spatial resolution and sensitivity by also correcting the probe damping effects from the imaging optics via LEP. This allows us to directly resolve subtle internal structures of magnetic skyrmions near the skyrmion cores, boundaries, and dislocations in an FeGe single crystal. Our study establishes a quantitative, high-resolution magnetic microscopy technique that can reveal the nanoscale spin textures, especially magnetization discontinuities and topological defects in nanomagnets. In conclusion, the technique’s high dose efficiency should also make it well-suited for the exploration of magnetic textures in electron radiation-sensitive materials such as organic or molecular magnets.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Optimizing stability, transport, and divertor operation through plasma shaping for steady-state scenario development in DIII-D

Recent studies on the DIII-D tokamak [ J. L. Luxon, Nucl. Fusion 42, 614 (2002) ] have elucidated key aspects of the dependence of stability, confinement, and density control on the plasma magnetic configuration, leading to the demonstration of nearly noninductive operation for >1 s with pressure 30% above the ideal no-wall stability limit. Achieving fully noninductive tokamak operation requires high pressure, good confinement, and density control through divertor pumping. Plasma geometry affects all of these. Ideal magnetohydrodynamics modeling of external kink stability suggests that it may be optimized by adjusting the shape parameter known as squareness ( ). Optimizing kink stability leads to an increase in the maximum stable pressure. Experiments confirm that stability varies strongly with , in agreement with the modeling. Optimization of kink stability via is concurrent with an increase in the H-mode edge pressure pedestal stability. Global energy confinement is optimized at the lowest tested, with increased pedestal pressure and lower core transport. Adjusting the magnetic divertor balance about a double-null configuration optimizes density control for improved noninductive auxiliary current drive. The best density control is obtained with a slight imbalance toward the divertor opposite the ion grad(B) drift direction, consistent with modeling of these effects. These optimizations have been combined to achieve noninductive current fractions near unity for over 1 s with normalized pressure of 3.5< N<3.9, bootstrap current fraction of >65%, and a normalized confinement factor of H98(y,2) 1.5.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optimizing stability, transport, and divertor operation through plasma shaping for steady-state scenario development in DIII-D

Recent studies on the DIII-D tokamak [J. L. Luxon, Nucl. Fusion 42, 614 (2002)] have elucidated key aspects of the dependence of stability, confinement, and density control on the plasma magnetic configuration, leading to the demonstration of nearly noninductive operation for >1 s with pressure 30% above the ideal no-wall stability limit. Achieving fully noninductive tokamak operation requires high pressure, good confinement, and density control through divertor pumping. Plasma geometry affects all of these. Ideal magnetohydrodynamics modeling of external kink stability suggests that it may be optimized by adjusting the shape parameter known as squareness ({zeta}). Optimizing kink stability leads to an increase in the maximum stable pressure. Experiments confirm that stability varies strongly with {zeta}, in agreement with the modeling. Optimization of kink stability via {zeta} is concurrent with an increase in the H-mode edge pressure pedestal stability. Global energy confinement is optimized at the lowest {zeta} tested, with increased pedestal pressure and lower core transport. Adjusting the magnetic divertor balance about a double-null configuration optimizes density control for improved noninductive auxiliary current drive. The best density control is obtained with a slight imbalance toward the divertor opposite the ion grad(B) drift direction, consistent with modeling of these effects. These optimizations have been combined to achieve noninductive current fractions near unity for over 1 s with normalized pressure of 3.5<{beta}{sub N}<3.9, bootstrap current fraction of >65%, and a normalized confinement factor of H{sub 98(y,2)}{approx_equal}1.5.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Primary Edge Localized Mode Filament Structure in the National Spherical Torus Experiment

Recent studies on the DIII-D tokamak [J. L. Luxon, Nucl. Fusion 42, 614 (2002)] have elucidated key aspects of the dependence of stability, confinement, and density control on the plasma magnetic configuration, leading to the demonstration of nearly noninductive operation for >1 s with pressure 30% above the ideal no-wall stability limit. Achieving fully noninductive tokamak operation requires high pressure, good confinement, and density control through divertor pumping. Plasma geometry affects all of these. Ideal magnetohydrodynamics modeling of external kink stability suggests that it may be optimized by adjusting the shape parameter known as squareness (zeta). Optimizing kink stability leads to an increase in the maximum stable pressure. Experiments confirm that stability varies strongly with zeta, in agreement with the modeling. Optimization of kink stability via zeta is concurrent with an increase in the H-mode edge pressure pedestal stability. Global energy confinement is optimized at the lowest zeta tested, with increased pedestal pressure and lower core transport. Adjusting the magnetic divertor balance about a double-null configuration optimizes density control for improved noninductive auxiliary current drive. The best density control is obtained with a slight imbalance toward the divertor opposite the ion grad(B) drift direction, consistent with modeling of these effects. These optimizations have been combined to achieve noninductive current fractions near unity for over 1 s with normalized pressure of 3.5 65%, and a normalized confinement factor of H(98(y,2))approximate to 1.5.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optimizing stability, transport, and divertor operation through plasma shaping for steady-state scenario development in DIII-D

Recent studies on the DIII-D tokamak [J. L. Luxon, Nucl. Fusion 42, 614 (2002)] have elucidated key aspects of the dependence of stability, confinement, and density control on the plasma magnetic configuration, leading to the demonstration of nearly noninductive operation for >1 s with pressure 30% above the ideal no-wall stability limit. Achieving fully noninductive tokamak operation requires high pressure, good confinement, and density control through divertor pumping. Plasma geometry affects all of these. Ideal magnetohydrodynamics modeling of external kink stability suggests that it may be optimized by adjusting the shape parameter known as squareness ({zeta}). Optimizing kink stability leads to an increase in the maximum stable pressure. Experiments confirm that stability varies strongly with {zeta}, in agreement with the modeling. Optimization of kink stability via {zeta} is concurrent with an increase in the H-mode edge pressure pedestal stability. Global energy confinement is optimized at the lowest {zeta} tested, with increased pedestal pressure and lower core transport. Adjusting the magnetic divertor balance about a double-null configuration optimizes density control for improved noninductive auxiliary current drive. The best density control is obtained with a slight imbalance toward the divertor opposite the ion grad(B) drift direction, consistent with modeling of these effects. These optimizations have been combined to achieve noninductive current fractions near unity for over 1 s with normalized pressure of 3.5<{beta}{sub N}<3.9, bootstrap current fraction of >65%, and a normalized confinement factor of H{sub 98(y,2)}{approx}1.5.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Thermodynamic analysis of binary Fe{sub 85}B{sub 15} to quinary Fe{sub 85}Si{sub 2}B{sub 8}P{sub 4}Cu{sub 1} alloys for primary crystallizations of α-Fe in nanocrystalline soft magnetic alloys

Fe-based Fe{sub 85}B{sub 15}, Fe{sub 84}B{sub 15}Cu{sub 1}, Fe{sub 82}Si{sub 2}B{sub 15}Cu{sub 1}, Fe{sub 85}Si{sub 2}B{sub 12}Cu{sub 1}, and Fe{sub 85}Si{sub 2}B{sub 8}P{sub 4}Cu{sub 1} (NANOMET{sup ®}) alloys were experimental and computational analyzed to clarify the features of NANOMET that exhibits high saturation magnetic flux density (B{sub s}) nearly 1.9 T and low core loss than conventional nanocrystalline soft magnetic alloys. The X-ray diffraction analysis for ribbon specimens produced experimentally by melt spinning from melts revealed that the samples were almost formed into an amorphous single phase. Then, the as-quenched samples were analyzed with differential scanning calorimeter (DSC) experimentally for exothermic enthalpies of the primary and secondary crystallizations (ΔH{sub x1} and ΔH{sub x2}) and their crystallization temperatures (T{sub x1} and T{sub x2}), respectively. The ratio ΔH{sub x1}/ΔH{sub x2} measured by DSC experimentally tended to be extremely high for the Fe{sub 85}Si{sub 2}B{sub 8}P{sub 4}Cu{sub 1} alloy, and this tendency was reproduced by the analysis with commercial software, Thermo-Calc, with database for Fe-based alloys, TCFE7 for Gibbs free energy (G) assessments. The calculations exhibit that a volume fraction (V{sub f}) of α-Fe tends to increase from 0.56 for the Fe{sub 85}B{sub 15} to 0.75 for the Fe{sub 85}Si{sub 2}B{sub 8}P{sub 4}Cu{sub 1} alloy. The computational analysis of the alloys for G of α-Fe and amorphous phases (G{sub α-Fe} and G{sub amor}) shows that a relationship G{sub α-Fe} ∼ G{sub amor} holds for the Fe{sub 85}Si{sub 2}B{sub 12}Cu{sub 1}, whereas G{sub α-Fe} < G{sub amor} for the Fe{sub 85}Si{sub 2}B{sub 8}P{sub 4}Cu{sub 1} alloy at T{sub x1} and that an extremely high V{sub f} = 0.75 was achieved for the Fe{sub 85}Si{sub 2}B{sub 8}P{sub 4}Cu{sub 1} alloy by including 2.8 at. % Si and 4.5 at. % P into α-Fe. These computational results indicate that the Fe{sub 85}Si{sub 2}B{sub 8}P{sub 4}Cu{sub 1} alloy barely forms amorphous phase, which, in turn, leads to high V{sub f} and resultant high B{sub s}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NUMERICAL SIMULATION OF AN EUV CORONAL WAVE BASED ON THE 2009 FEBRUARY 13 CME EVENT OBSERVED BY STEREO

On 2009 February 13, a coronal wave-CME-dimming event was observed in quadrature by the Solar Terrestrial Relations Observatory (STEREO) spacecraft. We analyze this event using a three-dimensional, global magnetohydrodynamic model for the solar corona. The numerical simulation is driven and constrained by the observations, and indicates where magnetic reconnection occurs between the expanding CME core and surrounding environment. We focus primarily on the lower corona, extending out to 3 R{sub sun}; this range allows simultaneous comparison with both EUVI and COR1 data. Our simulation produces a diffuse coronal bright front remarkably similar to that observed by STEREO/EUVI at 195 A. It is made up of two components, and is the result of a combination of both wave and non-wave mechanisms. The CME becomes large-scale quite low (< 200 Mm) in the corona. It is not, however, an inherently large-scale event; rather, the expansion is facilitated by magnetic reconnection between the expanding CME core and the surrounding magnetic environment. In support of this, we also find numerous secondary dimmings, many far from the initial CME source region. Relating such dimmings to reconnecting field lines within the simulation provides further evidence that CME expansion leads to the 'opening' of coronal field lines on a global scale. Throughout the CME expansion, the coronal wave maps directly to the CME footprint. Our results suggest that the ongoing debate over the 'true' nature of diffuse coronal waves may be mischaracterized. It appears that both wave and non-wave models are required to explain the observations and understand the complex nature of these events.

79 ASTRONOMY AND ASTROPHYSICS↗