Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Layered Structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Structural consideration on the emission properties of Eu²⁺-doped Ba(Sr, Ca)₂MgSi₂O₈

Emission properties of Eu²⁺-doped Ba(Sr, Ca)₂MgSi₂O₈ are discussed in terms of the crystal structure refined by Rietveld method. Ba(Sr, Ca)₂MgSi₂O₈ has glaserite-type layered structure. In response to Sr/(Sr+Ca) ratio, the layer-framework build up by corner-sharing of MgO₆ octahedra and SiO₄ tetrahedra twists around C₃ axes to match the size of B-site cation (Sr²⁺/Ca²⁺). This twist significantly affects the unit cell size and the coordination environment around B-site. Eu²⁺-doped Ba(Sr, Ca)₂MgSi₂O₈ exhibited blue emission under ultraviolet irradiation. The emission spectra have been characterized by two emission components derived from Eu²⁺ ions occupying A- and B-site. Both components showed similar wavelength shift for different Sr/(Sr+Ca), in response to Si–O₁ polarization and to the structural change. - Graphical abstract: Emission properties of Eu²⁺-doped Ba(Sr, Ca)₂MgSi₂O₈ are discussed in terms of the crystal structure refined by Rietveld method. Highlights: • Glaserite-type Ba(Sr, Ca)₂MgS₂O₈ has been prepared by a solid state reaction. • Ba(Sr, Ca)₂MgSi₂O₈ changes the crystal structure, depending on Sr/(Sr+Ca) ratio. • Eu²⁺-doped Ba(Sr, Ca)₂MgSi₂O₈ exhibits blue emission under ultraviolet irradiation. • Emission from Ba(Sr, Ca)₂MgSi₂O₈ is characterized by two Eu²⁺ emission components. • The two emissions show wavelength shift in a similar manner against Sr/(Sr+Ca)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modelling mixed-phase clouds with the large-eddy model UCLALES–SALSA

The large-eddy model UCLALES–SALSA, with an exceptionally detailed aerosol description for both aerosol number and chemical composition, has been extended for ice and mixed-phase clouds. Comparison to a previous mixed-phase cloud model intercomparison study confirmed the accuracy of newly implemented ice microphysics. A further simulation with a heterogeneous ice nucleation scheme, in which ice-nucleating particles (INPs) are also a prognostic variable, captured the typical layered structure of Arctic mid-altitude mixed-phase cloud: a liquid layer near cloud top and ice within and below the liquid layer. In addition, the simulation showed a realistic freezing rate of droplets within the vertical cloud structure. The represented detailed sectional ice microphysics with prognostic aerosols is crucially important in reproducing mixed-phase clouds.

54 ENVIRONMENTAL SCIENCES↗

Gallium Pnictides of the Alkaline Earth Metals, Synthesized by Means of the Flux Method: Crystal Structures and Properties of CaGa[subscript 2]Pn[subscript 2], SrGa[subscript 2]As[subscript 2], Ba[subscript 2]Ga[subscript 5]As[subscript 5], and Ba[subscript 4]Ga[subscript 5]Pn[subscript 8] (Pn = P or As)

The focus of this paper is on the structural characterization of the new Zintl phases CaGa{sub 2}P{sub 2}, CaGa{sub 2}As{sub 2}, SrGa{sub 2}As{sub 2}, and Ba{sub 2}Ga{sub 5}As{sub 5}, and the solid solution (Ba{sub 0.85(1)}Sr{sub 0.15}){sub 2}Ga{sub 5}As{sub 5}, all of which were synthesized from molten metal fluxes.CaGa{sub 2}P{sub 2}, CaGa{sub 2}As{sub 2}, and SrGa{sub 2}As{sub 2} have layered structures with polyanionic layers made of ethane-like Ga{sub 2}P6 and Ga{sub 2}As6 motifs fused through common edges; the polyanionic substructure in Ba{sub 2}Ga{sub 5}As{sub 5} consists of condensed Ga{sub 2}As6 units and GaAs{sub 4} tetrahedra. Ba{sub 4}Ga{sub 5}P{sub 8} and Ba{sub 4}Ga{sub 5}As{sub 8}, another pair of new compounds with channel-like 3D structures, were also synthesized from metal fluxes, and their structures were established from single-crystal X-ray and synchrotron powder diffraction. They are based on GaP{sub 4} and GaAs{sub 4} tetrahedra, with parts of their structures being heavily disordered. The electronic structures computed with the linear muffin-tin orbital (LMTO) method are discussed as well, alongside the thermopower and the electrical conductivity, measured on single crystals of Ba{sub 2}Ga{sub 5}As{sub 5} and the solid solution (Ba{sub 0.85(1)}Sr{sub 0.15}){sub 2} Ga{sub 5}As{sub 5}. They demonstrate that such an approach would be an effective way to fine-tune the transport properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal and molecular structure of adduct of 6-benzylaminopurine and 5-sulfosalicylic acid

The crystal structure of adduct of 6-benzylaminopurine and 5-sulfosalicylic acid C{sub 19}H{sub 25}N{sub 5}O{sub 10}S 1 is studied using single-crystal diffraction (R = 0.0482 for 2852 reflections with I > 2{sigma}(I)). The asymmetric unit of 1 contains one 6-benzylaminopurine molecule and one 5-sulfosalicylic acid molecule, as well as four lattice water molecules. Hydrogen bonds, formed by 6-benzylaminopurine and 5-sulfosalicylic acid, link the two molecules into one-dimensional chain (omitting four water molecules), further joined to two-dimensional layer network. Short ring-interactions with intra-chain {pi}-{pi} stacking are observed. The data of IR spectroscopy confirm the formation of the two-dimensional supramolecular layer structure. At last, a 3D supramolecular network constructs via hydrogen bonds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Layer-by-layer composition and structure of silicon subjected to combined gallium and nitrogen ion implantation for the ion synthesis of gallium nitride

The composition and structure of silicon surface layers subjected to combined gallium and nitrogen ion implantation with subsequent annealing have been studied by the X-ray photoelectron spectroscopy, Rutherford backscattering, electron spin resonance, Raman spectroscopy, and transmission electron microscopy techniques. A slight redistribution of the implanted atoms before annealing and their substantial migration towards the surface during annealing depending on the sequence of implantations are observed. It is found that about 2% of atoms of the implanted layer are replaced with gallium bonded to nitrogen; however, it is impossible to detect the gallium-nitride phase. At the same time, gallium-enriched inclusions containing ∼25 at % of gallium are detected as candidates for the further synthesis of gallium-nitride inclusions.

36 MATERIALS SCIENCE↗

High Nickel and No Cobalt - The Pursuit of Next-Generation Layered Oxide Cathodes

The prosperity of the electric vehicle industry is driving the research and development of lithium-ion batteries. As one of the core components in the entire battery system, cathode materials are currently facing major challenges in pushing higher capacity up to their theoretical limits and transitioning away from the unaffordable metals. To meet these requirements, the search for next-generation cathode materials has shifted to high-nickel and cobalt-free cathodes. In this review, we distinctly pointed out the shortcomings of cobalt in stabilizing layered structures, and systematically summarized the recent efforts to eliminate cobalt and achieve higher nickel content in layered cathode materials. Lastly, a reasonable prospect is put forward for further development of layered cathode materials and other promising candidates, which is likely to spur a wave of efforts toward developing high-performance and low-cost Li-ion batteries.

25 ENERGY STORAGE↗

Syntheses, structures and photoluminescence of a series of lanthanide-organic frameworks involving in situ ligand formation

A series of lanthanide-organic frameworks with aromatic pyridinecarboxylate ligand, generally formulated as [Ln(PYDC)(C{sub 2}O{sub 4}){sub 0.5}(H{sub 2}O){sub 2}].H{sub 2}O (Ln=Pr(1), Nd(2), Eu(3), Gd(4), Tb(5), Er(6); H{sub 2}PYDC=3,4-pyridinedicarboxylic acid) have been successfully synthesized and characterized. Their isostructures are built up from one-dimensional (1D) infinite chains cross-linked via the tri-connected PYDC ligands, leading to the two-dimensional (2D) layer structure. The adjacent layers are further extended into three-dimensional (3D) supramolecular frameworks through hydrogen bonding and {pi}-{pi} stacking interactions. Interestingly, the oxalate bridging ligand is believed to form via in situ ligand synthesis through decarboxylation of the organic precursor, H{sub 2}PYDC. Complexes 3 and 5 exhibit strong fluorescent emissions in the visible region at room temperature. - Graphical abstract: A series of lanthanide-organic frameworks with aromatic pyridinecarboxylate ligands have been successfully synthesized and characterized. Complexes 3 and 5 exhibit strong fluorescent emissions in the visible region at room temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Boosting the Oxygen Evolution Reaction by Tuning the Interfacial Iron Adsorption on Layered Double Hydroxide

Understanding the interaction between ions in the electrolyte and electrode materials plays an important role in optimizing the water electrolysis performance for hydrogen production. Herein, the synergistic effect of iron (Fe) in the electrolyte and interlayer anions within the layered structure on the oxygen evolution reaction (OER) has been investigated by combining material synthesis with controlled structure, multiple characterization techniques, and first-principles calculations. Nickel aluminum layered double hydroxides (NiAl-LDHs) with different interlayer anions (CO 3 2– , Cl – , and Br – ) show similar oxygen evolution activity in the absence of Fe species in the electrolyte. The addition of Fe into the electrolyte results in improved performance for all of the NiAl-LDHs, following the rank LDH-Br > LDH-Cl > LDH-CO 3 , under all of the conditions with varied concentration of Fe. X-ray absorption spectroscopy and identical location electron microscopy analyses show that the LDH structure remains unchanged after the OER activity test, while in situ stationary probe rotating disk electrode inductively coupled plasma mass spectrometry (SPRDE-ICP-MS) measurements show partial dissolution of the intercalating halide ions during cycling, with less dissolution for Br-intercalated materials. Insights from theoretical calculations demonstrate the thermodynamic preference of Br – to remain intercalated in the presence of Fe, while the stronger adsorption of Fe(OH) 3 species on the LDH-Br sample promotes the OER activity. In conclusion, these results provide mechanistic insights into the rational design of active layered materials with an enhanced OER performance for efficient water electrolysis.

58 GEOSCIENCES↗

A Pseudo Planar Heterojunction Structure for Eco‐Friendly Printable Organic Solar Cells Achieving 19.05% Efficiency

Abstract Obtaining a well‐accurate vertical distribution active layer morphology through the air‐printing process is an essential task for achieving efficient scalable large‐area organic solar cells (OSCs). In this target, the desired and controllable pseudo planar heterojunction (PPHJ) active layer structure with suitable phase separation is developed by pre‐deposited D18‐Cl layer under the PM6:BTP‐eC9 film via an eco‐friendly manufacturing method. The addition of the D18‐Cl regulates molecular crystallization and leads to an ideal vertical stratification while simultaneously suppressing voltage loss, optimizing energetic disorder, and carrier management. Impressively, the optimal PPHJ devices perform superior power conversion efficiencies (PCEs) of 19.05% (100 nm), 17.33% (300 nm), and 14.14% (4 cm 2 ) compared to the BHJ devices. Importantly, the PPHJ OSCs also exhibit an impressive extrapolated T 80 (the time required to reach 80% of initial PCE) of long‐time storage and operational stability, as well as thermal stability.

Chemistry↗

Evolution of surface morphology and electronic structure of few layer graphene after low energy Ar{sup +} ion irradiation

We report on co-existing dual anisotropy ripple formation, sp bonding transformation, and variation in the delocalized {pi} electron system in 1 keV Ar{sup +} ion irradiated few-layer graphene surfaces. Ripples in directions, perpendicular and parallel to the ion beam were found. The irradiation effect and the transition from the sp{sup 2}-bonding to sp{sup 3}-hybridized state were analyzed from the deconvolution of the C (1s) peak and from the shape of the derivative of the Auger transition spectra. The results suggest a plausible mechanism for tailoring of few-layer graphene electronic band structure with interlayer coupling tuned by the ion irradiation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Layered polymorph of titanium triiodide

A previously unreported layered spin ½ triangular lattice polymorph of TiI 3 is described, synthesized under 6 GPa of applied pressure at 900 °C, but stable at atmospheric pressure. This air-sensitive material has a CdI 2 -type layered structure (P-3m1 (no. 164), a = 4.012 Å and c = 6.641 Å at 120 K, Z = 1 of Ti 0.667 I 2 ) with an in-plane triangular lattice, related to that of TiI 4 (Ti 0.5 I 2 ). Although the TiI 3 formula is consistent with expectations for a layered honeycomb lattice of spin ½ Ti(III), there appears to be disorder in the crystal structure. Magnetic susceptibility and heat capacity measurements suggest that the material undergoes several low temperature phase transitions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Performance of a ferritic/martensitic steel for nuclear reactor applications fabricated using additive manufacturing

Ferritic/martensitic (FM) steels are being targeted for use in a range of advanced reactor concepts as cladding and structural components. FM steels for nuclear reactor applications have historically been produced using traditional methods (e.g., casting and forging), but recently, additive manufacturing processes have become of interest for making FM-based components. Here, the laser-blown-powder additive manufacturing process was used to fabricate an FM steel, HT9, followed by microstructural and mechanical performance evaluations to determine the viability of future use of additive manufacturing for FM-based component fabrication. Results showed that the as-built condition formed a layered structure with alternating layers of δ-ferrite and martensite, which resulted in anisotropic engineering and true-stress, true-strain mechanical performance. Post-build normalizing and tempering treatments alerted the prior austenite grain size and precipitate distributions, and drove the mechanical performance to near-isotropic properties that mimic wrought-processed properties. Overall, the resulting microstructures in all conditions were rationalized in the context of multi-pass welding and the synergies are discussed.

36 MATERIALS SCIENCE↗

Influence of Coulomb collisions on the structure of reconnection layers

The influence of Coulomb collisions on the structure of reconnection layers is examined in neutral sheet geometry using fully kinetic simulations with a Monte Carlo treatment of the Fokker-Planck operator. The algorithm is first carefully benchmarked against key predictions from transport theory, including the parallel and perpendicular resistivities as well as the thermal force. The results demonstrate that the collisionality is accurately specified, thus allowing the initial Lundquist number to be chosen as desired. For modest Lundquist numbers S < or approx. 1000, the classic Sweet-Parker solution is recovered. Furthermore, a distinct transition to a faster kinetic regime is observed when the thickness of the resistive layer {delta}{sub SP} falls below the ion inertial length d{sub i}. For higher Lundquist numbers S > or approx. 1000, plasmoids (secondary islands) are observed within the elongated resistive layers. These plasmoids give rise to a measurable increase in the reconnection rate and for certain cases induce a transition to kinetic regimes sooner than expected from the {delta}{sub SP}{approx_equal}d{sub i} condition. During this transition, the reconnection electric field exceeds the runaway limit, leading to electron scale current layers in which the nonideal electric field is supported predominantly by off-diagonal components in the electron pressure tensor, along with a residual contribution from electron-ion momentum exchange. These weakly collisional electron layers are also unstable to the formation of new plasmoids.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Molecular beam epitaxy growth of high quality p-doped SnS van der Waals epitaxy on a graphene buffer layer

We report on the systematic investigation of optoelectronic properties of tin (IV) sulfide (SnS) van der Waals epitaxies (vdWEs) grown by molecular beam epitaxy (MBE) technique. Energy band simulation using commercial CASTEP code indicates that SnS has an indirect bandgap of size 0.982 eV. Furthermore, our simulation shows that elemental Cu can be used as a p-type dopant for the material. Growth of high quality SnS thin films is accomplished by MBE technique using graphene as the buffer layer. We observed significant reduction in the rocking curve FWHM over the existing published values. Crystallite size in the range of 2-3 {mu}m is observed which is also significantly better than the existing results. Measurement of the absorption coefficient, {alpha}, is performed using a Hitachi U-4100 Spectrophotometer system which demonstrate large values of {alpha} of the order of 10{sup 4} cm{sup -1}. Sharp cutoff in the values of {alpha}, as a function of energy, is observed for the films grown using a graphene buffer layer indicating low concentration of localized states in the bandgap. Cu-doping is achieved by co-evaporation technique. It is demonstrated that the hole concentration of the films can be controlled between 10{sup 16} cm{sup -3} and 5 x 10{sup 17}cm{sup -3} by varying the temperature of the Cu K-cell. Hole mobility as high as 81 cm{sup 2}V{sup -1}s{sup -1} is observed for SnS films on graphene/GaAs(100) substrates. The improvements in the physical properties of the films are attributed to the unique layered structure and chemically saturated bonds at the surface for both SnS and the graphene buffer layer. Consequently, the interaction between the SnS thin films and the graphene buffer layer is dominated by van der Waals force and structural defects at the interface, such as dangling bonds or dislocations, are substantially reduced.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

EVIDENCE FOR QUASI-ADIABATIC MOTION OF CHARGED PARTICLES IN STRONG CURRENT SHEETS IN THE SOLAR WIND

We investigate quasi-adiabatic dynamics of charged particles in strong current sheets (SCSs) in the solar wind, including the heliospheric current sheet (HCS), both theoretically and observationally. A self-consistent hybrid model of an SCS is developed in which ion dynamics is described at the quasi-adiabatic approximation, while the electrons are assumed to be magnetized, and their motion is described in the guiding center approximation. The model shows that the SCS profile is determined by the relative contribution of two currents: (i) the current supported by demagnetized protons that move along open quasi-adiabatic orbits, and (ii) the electron drift current. The simplest modeled SCS is found to be a multi-layered structure that consists of a thin current sheet embedded into a much thicker analog of a plasma sheet. This result is in good agreement with observations of SCSs at ∼1 au. The analysis of fine structure of different SCSs, including the HCS, shows that an SCS represents a narrow current layer (with a thickness of ∼10{sup 4} km) embedded into a wider region of about 10{sup 5} km, independently of the SCS origin. Therefore, multi-scale structuring is very likely an intrinsic feature of SCSs in the solar wind.

79 ASTRONOMY AND ASTROPHYSICS↗

Microstructural variations in Cu/Nb and Al/Nb nanometallic multilayers

Miscible (Al/Nb) and immiscible (Cu/Nb) nanometallic multilayer systems were characterized by means of transmission electron microscopy techniques, primarily by automated crystallographic orientation mapping, which allows for the resolution of crystal structures and orientations at the nanoscale. By using this technique, distinctive Nb orientations in relation to the crystallographic state of the Al and Cu layer structures can be observed. Specifically, the Al and Cu layers were found to consist of amorphous, semi-amorphous, and crystalline regions, which affect the overall multilayer microstructure.

77 NANOSCIENCE AND NANOTECHNOLOGY↗