Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IRIS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Voyager infrared observations of Uranus' atmosphere - Thermal structure and dynamics

The temperature structure of the Uranus atmosphere is investigated on the basis of 325/cm and 225/cm Voyager 2 IRIS observations of a layer between 60 and 200 mbar (including the tropopause). The data are presented in graphs and analyzed in detail. The latitudinal variations of the temperature near the tropopause and the inferred thermal winds are shown to be in good agreement with the findings reported for lower altitudes by Hanel et al. (1986), although greater in amplitude. A linear zonally symmetric circulation model with no solar and condensation heating, a frictional damping time 1-2 times the radiative damping time, a subrotating atmosphere at low latitudes, and zonal winds decaying with altitude is proposed to account for the observed structures.

Flasar, F. M.↗
NASA NTRS1988

Infrared polar brightenings on Jupiter. IV - Spatial properties of methane emission

Different polar 'hot spot' differences are revealed between the northern and southern hemispheres of Jupiter by 7.8-micron observations made with NASA's Mauna Kea IR Telescope Facility. While the northern hot spot is fixed, relative to system III coordinates, at 180 + or - 10 deg longitude and 60 + or - 10 deg latitude, the southern hot spot is fixed with respect to neither the system III longitude and latitude, nor the subpolar point, or even Io's position. Voyager I IRIS data show the north polar hot spot to be more extended in longitude than latitude.

Caldwell, John↗
NASA NTRS1988

Infrared polar brightenings on Jupiter. V - A thermal equilibrium model for the north polar hot spot

Voyager IRIS instrument records of the IR hydrocarbon emissions from Jupiter's north polar region are presently studied to determine the spatial and other characteristics of the north polar hot spot. Attention is given to a thermal equilibrium model that exploits the asymmetry found in 7.8-micron emission of stratospheric methane with respect to system III longitude in order to estimate stratospheric zonal wind velocity. This model accurately predicts the observed asymmetry in acetylene's 13.6-micron emission; this requires, however, enhanced acetylene abundance in the hot spot, as well as ethane depletion. Energetic charged particles are suggested to be the most probable cause of these effects.

Halthore, Rangasayi↗
NASA NTRS1988

Methane rain on Titan

The atmosphere of Titan is characterized by means of model computations based on Voyager IRIS IR spectra and published data from laboratory determinations of absorption coefficients and cloud refractive indices. The results are presented in tables and graphs, and it is pointed out that the presence of Ar is not required in the model. Particular attention is given to the role of CH4, which is found to form patchy clouds (with particle radii of 50 microns or greater and visible/IR optical depths of 2-5) at altitudes up to about 30 km. The mechanisms by which such rain-sized particles could form are discussed, and it is suggested that the observed 500-600/cm spectrum is affected much less by the CH4 clouds than by H2 or variations in the temperature of the high-altitude haze.

Toon, Owen B.↗
NASA NTRS1988

Infrared processes in the Jovian auroral zone

In the present theoretical model of the Jovian auroral zone's CH4 and H2 vibrational excitation and deexitation processes, the calculation of the emission intensities of nu3 and nu4 bands of CH3 assume that electrons are the bombarding particles. The most uncertain part of the model calculation involves the energy flux spectrum of incident electrons on the auroral zone. Comparisons with Voyager 1 IRIS observations indicate a domination of the nonthermal, directly or indirectly particle bombardment-derived emission by the thermal emission of the CH4 band.

Kim, Sang J.↗
NASA NTRS1988

Relationships of earthquakes (and earthquake-associated mass movements) and polar motion as determined by Kalman filtered, Very-Long-Baseline-Interferometry

A Kalman filter was designed to yield optimal estimates of geophysical parameters from Very Long Baseline Interferometry (VLBI) group delay data. The geophysical parameters are the polar motion components, adjustments to nutation in obliquity and longitude, and a change in the length of day parameter. The VLBI clock (and clock rate) parameters and atmospheric zenith delay parameters are estimated simultaneously. Filter background is explained. The IRIS (International Radio Interferometric Surveying) VLBI data are Kalman filtered. The resulting polar motion estimates are examined. There are polar motion signatures at the times of three large earthquakes occurring in 1984 to 1986: Mexico, 19 September, 1985 (Magnitude M sub s = 8.1); Chile, 3 March, 1985 (M sub s = 7.8); and Taiwan, 14 November, 1986 (M sub s = 7.8). Breaks in polar motion occurring about 20 days after the earthquakes appear to correlate well with the onset of increased regional seismic activity and a return to more normal seismicity (respectively). While the contribution of these three earthquakes to polar motion excitations is small, the cumulative excitation due to earthquakes, or seismic phenomena over a Chandler wobble damping period may be significant. Mechanisms for polar motion excitation due to solid earth phenomena are examined. Excitation functions are computed, but the data spans are too short to draw conclusions based on these data.

Preisig, Joseph Richard Mark↗
NASA NTRS1988

Evaluation of the Portable Instantaneous Display Analysis Spectrometer (PIDAS)

The Portable Instantaneous Display Analysis System (PIDAS) was evaluated by measuring 125 spectra of mineral specimens and rock samples under the following conditions: in the laboratory under artificial illumination and outdoors, on the building patio, while still using the line voltage electric power supplies. The PIDAS was compared and contrasted with the GEOSCAN PFS, Daedalus-Spectrafax 440, and the Geophysical Environmental Research (GER) IRIS Mark 4.

Lyon, R. J. P.↗
NASA NTRS1989

Model representation of the ambient electron density distribution in the middle atmosphere

While the Langmuir probe controlled by rocket propagation experiments by the University of Illinois at midlatitude revealed the existence of a permanent D region turning point (DTP), similar measurements over the Thumba equatorial station did not clearly bring out the above daytime feature. Moreover, the calibration constant (ratio of electron density to the current drawn by the Langmuir probe) increased with height (in the 70 to 100 km region) in the case of the midlatitude observations whereas the recent measurements over Thumba showed a decrease up to about 90 km followed by an increase above 90 km. Secondly, there is the problem of reconciling the station oriented observations from the COSPAR family with the ground based radio propagation measurements from the URSI family. Thirdly, new information on Winter in Northern Europe (WINE) and in USSR is available by asking for its incorporation into any global model such as the IRI. The results of investigation of the above aspects are presented.

Ramanamurty, Y. V.↗
NASA NTRS1989

Slowly moving thermal features on Jupiter

Maps of the Jovian upper troposphere temperatures derived from Voyager 1 and Voyager 2 infrared interferometer spectrometer (IRIS) spectra show large-scale features which move very slowly. The motion is very different from the inferred local fluid velocity. It is suggested that these features may indicate a deeply-rooted fluid dynamical regime beneath the surface meteorology.

Magalhaes, J. A.↗
NASA NTRS1989

Dissipationless decay of Jovian jets

IRIS data have been taken as the bases of windshear calculations whose results imply a decrease of the Jovian planet's zonal jets with altitude. The simplified dynamical model developed to furnish a mechanism accounting for the decay involves a highly truncated set of dissipationless equations simulating the upper-tropospheric and stratospheric flow. While the model's lower boundary is constrained as a latitudinally periodic set of alternating jets, the upper boundary constraint maintains a constant potential temperature. The small perturbations to which the imposed zonal jets are unstable grow and interact nonlinearly, generating a zonal flow that opposes the imposed one and thereby leading to the apparent decrease of the jets with altitude.

Pirraglia, Joseph A.↗
NASA NTRS1990

Stowable Mechanical Sound Suppressor

Stowable sound suppressor conceived for high-speed commercial transport (HSCT) engines. Suppressor is located just aft of variable nozzle of engine. During takeoff, when suppression of noise required, multisegmented system of separators rotates out of center plug across nozzle stream. Actuation accomplished by single ball-screw drive and links, similar to spokes in umbrella. With iris nozzle translated forward, circumferential row of tubes exposed. Pattern of tubes and separators form suppressor configuration. Flow stream through slots and tubes sized to takeoff area. Useful on any turbo-jet engine in which active suppression of sound required.

Thompson, Edward R.↗
NASA NTRS1989

Tools for 3D scientific visualization in computational aerodynamics

The purpose is to describe the tools and techniques in use at the NASA Ames Research Center for performing visualization of computational aerodynamics, for example visualization of flow fields from computer simulations of fluid dynamics about vehicles such as the Space Shuttle. The hardware used for visualization is a high-performance graphics workstation connected to a super computer with a high speed channel. At present, the workstation is a Silicon Graphics IRIS 3130, the supercomputer is a CRAY2, and the high speed channel is a hyperchannel. The three techniques used for visualization are post-processing, tracking, and steering. Post-processing analysis is done after the simulation. Tracking analysis is done during a simulation but is not interactive, whereas steering analysis involves modifying the simulation interactively during the simulation. Using post-processing methods, a flow simulation is executed on a supercomputer and, after the simulation is complete, the results of the simulation are processed for viewing. The software in use and under development at NASA Ames Research Center for performing these types of tasks in computational aerodynamics is described. Workstation performance issues, benchmarking, and high-performance networks for this purpose are also discussed as well as descriptions of other hardware for digital video and film recording.

Bancroft, Gordon↗
NASA NTRS1989

Software systems for modeling articulated figures

Research in computer animation and simulation of human task performance requires sophisticated geometric modeling and user interface tools. The software for a research environment should present the programmer with a powerful but flexible substrate of facilities for displaying and manipulating geometric objects, yet insure that future tools have a consistent and friendly user interface. Jack is a system which provides a flexible and extensible programmer and user interface for displaying and manipulating complex geometric figures, particularly human figures in a 3D working environment. It is a basic software framework for high-performance Silicon Graphics IRIS workstations for modeling and manipulating geometric objects in a general but powerful way. It provides a consistent and user-friendly interface across various applications in computer animation and simulation of human task performance. Currently, Jack provides input and control for applications including lighting specification and image rendering, anthropometric modeling, figure positioning, inverse kinematics, dynamic simulation, and keyframe animation.

Phillips, Cary B.↗
NASA NTRS1989

Human task animation from performance models and natural language input

Graphical manipulation of human figures is essential for certain types of human factors analyses such as reach, clearance, fit, and view. In many situations, however, the animation of simulated people performing various tasks may be based on more complicated functions involving multiple simultaneous reaches, critical timing, resource availability, and human performance capabilities. One rather effective means for creating such a simulation is through a natural language description of the tasks to be carried out. Given an anthropometrically-sized figure and a geometric workplace environment, various simple actions such as reach, turn, and view can be effectively controlled from language commands or standard NASA checklist procedures. The commands may also be generated by external simulation tools. Task timing is determined from actual performance models, if available, such as strength models or Fitts' Law. The resulting action specification are animated on a Silicon Graphics Iris workstation in real-time.

Esakov, Jeffrey↗
NASA NTRS1989

Methodology for analysis and simulation of large multidisciplinary problems

The Integrated Structural Modeling (ISM) program is being developed for the Air Force Weapons Laboratory and will be available for Air Force work. Its goal is to provide a design, analysis, and simulation tool intended primarily for directed energy weapons (DEW), kinetic energy weapons (KEW), and surveillance applications. The code is designed to run on DEC (VMS and UNIX), IRIS, Alliant, and Cray hosts. Several technical disciplines are included in ISM, namely structures, controls, optics, thermal, and dynamics. Four topics from the broad ISM goal are discussed. The first is project configuration management and includes two major areas: the software and database arrangement and the system model control. The second is interdisciplinary data transfer and refers to exchange of data between various disciplines such as structures and thermal. Third is a discussion of the integration of component models into one system model, i.e., multiple discipline model synthesis. Last is a presentation of work on a distributed processing computing environment.

Russell, William C.↗
NASA NTRS1989

The implementation of the graphics of program EAGLE: A numerical grid generation code on NASA Langley SNS computer system

Program EAGLE (Eglin Arbitrary Geometry Implicit Euler) Numerical Grid Generation System is a composite (multi-block) algebraic or elliptic grid generation system designed to discretize the domain in and/or around any arbitrarily shaped three dimensional regions. This system combines a boundary conforming surface generation scheme and includes plotting routines designed to take full advantage of the DISSPLA Graphics Package (Version 9.0). Program EAGLE is written to compile and execute efficiently on any Cray machine with or without solid state disk (SSD) devices. Also, the code uses namelist inputs which are supported by all Cray machines using the FORTRAN compiler CFT77. The namelist inputs makes it easier for the user to understand the inputs and operation of Program EAGLE. EAGLE's numerical grid generator is constructed in the following form: main program, EGG (executive routine); subroutine SURFAC (surface generation routine); subroutine GRID (grid generation routine); and subroutine GRDPLOT (grid plotting routines). The EAGLE code was modified to use on the NASA-LaRC SNS computer (Cray 2S) system. During the modification a conversion program was developed for the output data of EAGLE's subroutine GRID to permit the data to be graphically displayed by IRIS workstations, using Plot3D. The code of program EAGLE was modified to make operational subroutine GRDPLOT (using DI-3000 Graphics Software Packages) on the NASA-LaRC SNS Computer System. How to implement graphically, the output data of subroutine GRID was determined on any NASA-LaRC graphics terminal that has access to the SNS Computer System DI-300 Graphics Software Packages. A Quick Reference User Guide was developed for the use of program EAGLE on the NASA-LaRC SNS Computer System. One or more application program(s) was illustrated using program EAGLE on the NASA LaRC SNS Computer System, with emphasis on graphics illustrations.

Houston, Johnny L.↗
NASA NTRS1989

Pilot response to avoidance regions depicted on alternate TCAS II resolution advisory displays

The objective of this study was to examine pilot reactions to three versions of the resolution advisory (RA) display of the TCAS II. Two modifications to the current system were designed to test the hypothesis that a different lighting pattern might be more effective than the 'red-only' version currently in use. Grouped into three sets, 28 RA displays of the same color pattern ('red-only', 'red-and-green', and 'green-only') were presented to 36 volunteer pilots on an IRIS terminal. The results indicated that the red-and-green display caused the least errors and hastened a quicker response than did the red-only display. Further, a subjective evaluation revealed that the pilots preferred the red-and-green display over the other two options. The red-only display caused the most errors, including seven unnecessary maneuvers. Pilots also responded slowest to this display and it was the least preferred.

Tuttell, Robert J.↗
NASA NTRS1989

Apparent limitations of head-up-displays and thermal imaging systems

A simulated helicopter flight through a slalom course was presented on a Silicon Graphics IRIS 3130. The display represented the major visual characteristics of thermal images. Subjects were asked to maintain a designated altitude, while flying a slalom course between regularly spaced pylons. The presence of some of the high frequency details in the image improved subjects' ability to reach and maintain the correct altitude. A head-up-display helped in maintaining altitude, but impaired maneuvering around the poles. The results are interpreted in terms of the competition for visual resources between the HUD and the world view.

Brickner, Michael S.↗