Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INDIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Inferring neutron yields using indium activation samples for small fractions of tritium added to deuterium fuel in inertial confinement fusion (ICF) experiments

In inertial confinement fusion experiments, the neutron yield is an important metric for thermonuclear fusion performance. Neutron activation diagnostics can be used to infer neutron yields. The material used for neutron activation diagnostic undergoes a threshold reaction so that only neutrons having energies above the threshold energy are observed. For thermonuclear experiments using deuterium (D) and tritium (T) fuel constituents, neutrons arising from D + D reactions (DD-neutrons) and neutrons resulting from D + T reactions (DT-neutrons) are of primary interest. Indium has two neutron activation reactions that can be used to infer yields of DD-neutrons and DT-neutrons. One threshold is high enough that only DT-neutrons can induce activation, the second reaction can be activated by both DD-neutrons and DT-neutrons. Thus, to obtain the DD-neutron yield, the contribution made by DT-neutrons to the total induced activity must be extracted. In DD-fuel experiments, DT-neutrons arise from secondary reactions, which are significantly lower in number than primary DD-neutrons, and their contribution to the inferred DD-neutron yield can be ignored. When the DD- and DT-neutron yields become comparable, such as when low tritium fractions are added to DD-fuel, the contribution of DT-neutrons must be extracted to obtain accurate yields. A general method is described for this correction to DD-neutron yields.

Mangan, M. A. (ORCID:000000034583700X)↗

Evaluation of silicon and indium gallium arsenide photodiodes as direct timing detectors for pulsed x-ray systems

Benchtop pulsed x-ray systems are commonly used to record dynamic material data on the order of nanoseconds, but pulse timing is often difficult to accurately determine. This study demonstrates that commercially available photodiodes can be used effectively for direct x-ray pulse detection without the need for visible light scintillators. X-ray pulses from four commercially available flash x-ray systems were quantified using one silicon and two indium gallium arsenide (InGaAs) photodiodes. The measured InGaAs pulse durations were strongly dependent on radiation dose in the non-linear operating regime, so the photodiodes were shielded to operate below the 2.5 V non-linear regime threshold. The average pulse duration and pulse arrival time jitter of the photodiodes for each x-ray source were within several nanoseconds with the exception of two sets of measurements that were affected by low instrument sensitivity and electrical noise. These results show that InGaAs photodiodes can be used as effective and repeatable stand-alone timing diagnostics for x-ray pulses as short as 20 ns or less.

47 OTHER INSTRUMENTATION↗

Local structure of zinc–indium–tin oxide films via grazing-incidence x-ray pair-distribution functions and theoretical methods

A detailed experimental and theoretical study on the local (r ≤ 4.5 Å) atomic structure of amorphous and crystalline zinc–indium–tin oxide (ZITO) thin films using grazing-incidence x-ray Pair-Distribution Functions (PDFs), ab initio Molecular Dynamics (MD), and Empirical Potential Structure Refinement (EPSR) Monte Carlo simulations is presented. High-energy synchrotron x rays, a two-dimensional detector, and different incident angles were used to probe the depth uniformity of five (ZnO) 0.15 (In 2 O 3 ) 0.70 (SnO 2 ) 0.15 films that were deposited via pulsed-laser deposition at growth temperatures (T G ) ranging from 25 to 300 °C. Films deposited at T G ≤ 150 °C were amorphous. The partially crystalline (T G = 200 °C) and fully crystalline (T G = 300 °C) films were highly textured. Both crystalline and amorphous structures were investigated using ab initio MD and EPSR Monte Carlo simulations. The density of the amorphous films determined from the experimental data agreed with MD calculations. Coordination numbers, bond lengths, and distortion for metal–oxygen and for both the edge- and corner-shared In–metal shells up to 4.5 Å obtained from PDF analysis closely agreed with MD and EPSR simulations. There is a pronounced decrease in the edge- and corner-shared In–Zn distances arising from the shorter Zn–O bond length, Zn–O tetrahedral coordination, and In–O–Zn angle in amorphous ZITO compared to its crystalline counterpart. A maximum in electrical mobility was observed for the amorphous film just before crystallization occurred. While the peak is broad, consistent with nearly unchanged overall cation–oxygen coordination in the amorphous films, ESPR results indicate that the tetrahedral coordination follows the conductivity trend.

Grazing Incidence X-ray↗

Proton radiation effects in indium oxide using cascade molecular dynamics simulations

Metal oxide (MO) semiconductors, characterized by their wide band gaps and notable charge transport properties, are promising candidates for electronic applications in extreme environments, including near-Earth space. However, atomistic simulations of radiation–matter interactions in MOs remain challenging due to the limitations of existing interatomic potentials, which often fail to capture both the short-range repulsive forces essential for radiation damage modeling and the long-range electrostatic effects governing defect evolution. In this work, we develop a customized interatomic potential tailored for radiation damage simulations in indium oxide (In 2 O 3 ) as a model system, a representative MO material. Our potential integrates the Ziegler-Biersack-Littmark potential to accurately describe short-range interactions with Buckingham and Coulombic potentials to account for long-range forces. We perform molecular dynamics simulations of low-energy proton irradiation using this custom potential. We employ the primary knock-on atom (PKA) cascade method to study atomic displacements and primary defect formation. Simulations were conducted for 1 keV proton irradiation in four randomly chosen directions, and PKA-driven defect analyses at 5, 10, and 15 keV to examine the effects of direction and energy level on damage generation. Our results provide insight into the impact of irradiation direction and energy level on the cascade evolution and defect formation mechanisms.

Atomistic simulations↗

Self-duality and a Hall-insulator phase near the superconductor-to-insulator transition in indium-oxide films

We combine measurements of the longitudinal ( ρ x x ) and Hall ( ρ x y ) resistivities of disordered 2D amorphous indium-oxide films to study the magnetic-field tuned superconductor-to-insulator transition (H-SIT) in the T → 0 limit. At the critical field, H c , the full resistivity tensor is T independent with ρ x x ( H c ) = h / 4 e 2 and ρ x y ( H c ) = 0 within experimental uncertainty in all films (i.e., these appear to be “universal” values); this is strongly suggestive that there is a particle–vortex self-duality at H = H c . The transition separates the (presumably) superconducting state at H < H c from a “Hall-insulator” phase in which ρ x x → ∞ as T → 0 whereas ρ x y approaches a nonzero value smaller than its “classical value” H / n e c ; i.e., 0 < ρ x y < H / n e c . A still higher characteristic magnetic field, H c * > H c , at which the Hall resistance is T independent and roughly equal to its classical value, ρ x y ≈ H / n e c , marks an additional crossover to a high-field regime (probably to a Fermi insulator) in which ρ x y > H / n e c and possibly diverges as T → 0 . We also highlight a profound analogy between the H-SIT and quantum-Hall liquid-to-insulator transitions (QHIT).

14 SOLAR ENERGY↗

Temperature-induced gradual polymorphic structural crossover in liquid indium, tin, and antimony

Temperature-induced polymorphic structural crossover in metallic liquid indium (In), tin (Sn), and antimony (Sb) is investigated by in situ high-energy x-ray diffraction and ab initio molecular dynamics simulations. The results demonstrate the existence of a temperature-induced reversible and gradual structural crossover in these three liquids, reflecting from both “static” structures, e.g., peak positions of the structure factor and pair distribution function, bond angle distribution, number of tetrahedra, cluster connection, free volume, and dynamical behaviors, including the relaxation time, diffusion coefficient, and non-Gaussian parameter. Further, the main difference from liquid In, Sn, to Sb is that not only the large-sized free volume but also the anharmonicity and the dynamical heterogeneity increase significantly with the appearance of strong covalent bonds. These findings will deepen the understanding of liquid structure and the liquid-liquid transition in metallic liquids.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Material design of indium-based compounds: Possible candidates for charge, valence, and bond disproportionation and superconductivity

Here, we design and investigate the physical properties of new indium compounds A In X 3 ( A = alkali metals, X = F or Cl). We find nine new In-based materials in their ground state that are thermodynamically stable but are not reported in ICSD (Inorganic Crystal Structure Database). We also discuss several metastable structures. This new series of materials display multiple valences, charge and bond disproportionation, and dimerization. The most common valence of In is 3+. We also find two rare alternatives, one has In 2+ with In-In dimerization and the other shows valence disproportionation to In 1+ and In 3+ with bond disproportionation. We study the possibility of superconductivity in these new In compounds and find that CsInF 3 has a transition temperature about 24 K with sufficient hole doping and pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mid-wave to near-IR optoelectronic properties and epsilon-near-zero behavior in indium-doped cadmium oxide

Indium-doped cadmium oxide (In:CdO) thin films exhibit tunable epsilon-near-zero (ENZ) modal frequencies across a wide spectral range, bridging the mid-wave and near-infrared (IR). In:CdO thin films are prepared by reactive cosputtering from metallic Cd and In targets using high-power impulse magnetron sputtering (HiPIMS) and radio frequency sputtering, respectively. Using this approach, CdO thin films with carrier concentrations ranging from 2.3 × 10 19 to 4.0 × 10 20 cm –3 and mobilities ranging from 300 to 400 cm 2 /Vs are readily achieved. UV-VIS absorption spectra are used to measure optical bandgap, revealing a Burstein-Moss shift of 0.58 eV across the doping range investigated. In this work, optical measurements demonstrate the tunability of near-perfect plasmonic ENZ absorption across the mid-wave and into the near-IR spectral ranges by controlling the carrier concentration through doping, while tuning the film thickness for impedance matching. In comparison to other dopants that can be introduced to HiPIMS-deposited CdO, In offers the largest range of carrier concentrations while maintaining high mobility, thus allowing for the widest accessibility of the IR spectrum of a single plasmonic material grown by sputtering.

36 MATERIALS SCIENCE↗

Indium Zinc Oxide Mediated Wafer Bonding for III-V/Si Tandem Solar Cells

Silicon-based tandem solar cells are desirable as a high efficiency, economically viable approach to one sun or low concentration photovoltaics. We present an approach to wafer bonded III-V/Si solar cells using amorphous indium zinc oxide (IZO) as an interlayer. We investigate the impact of a heavily doped III-V contact layer on the electrical and optical properties of bonded test samples, including the predicted impact on tandem cell performance. We present economic modeling which indicates that the path to commercial viability for bonded cells includes developing low-cost III-V growth and reducing constraints on material smoothness. If these challenges can be surmounted, bonded tandems on Si can be cost-competitive with incumbent PV technologies, especially in low concentration, single axis tracking systems.

14 SOLAR ENERGY↗

Impact of Indium Chloride Treatment on the Properties of CuInSe 2 Thin Films

Copper Indium diselenide (CIS) semiconductor thin films were deposited by single-stage process. Following the deposition, annealing and recrystallization of CIS was carried out in the presence of InCl 3 at different temperatures. Increase in grain size was observed by SEM in all cases. Increase in peak intensity was observed by XRD after treatment, correlating well with the SEM results. Measurements of the composition by both XRF and EDS indicate significant changes, notably a decrease in copper content. Here, this will likely be an issue for device performance and will need to be addressed.

14 SOLAR ENERGY↗

Understanding the unique optical and vibrational signatures of sequential infiltration synthesis derived indium oxyhydroxide clusters for CO 2 absorption

Sequential infiltration synthesis (SIS) is a vapor phase synthesis technique with potential to exert precise control over metal oxyhydroxide incorporation into polymer scaffolds. Here, we observe strong size-dependent properties of InO x (OH) y few-atom clusters deposited with variable SIS cycle numbers within a polymethylmethacrylate (PMMA) matrix. Infrared spectroscopy and ultraviolet-visible absorption spectroscopy reveal that the metal atom coordination and optical properties of the clusters depend on the number of SIS cycles performed as well as the choice of processing parameters. The incorporation of indium oxyhydroxide in PMMA via SIS presents an opportunity to improve the CO 2 absorption capacity and gas selectivity of inexpensive polymers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

SU-E-T-557: Measuring Neutron Activation of Cardiac Devices Irradiated During Proton Therapy Using Indium Foils

Purpose: Measuring Neutron Activation of Cardiac devices Irradiated during Proton Therapy using Indium Foils Methods: The foils had dimensions of 25mm x 25mm x 1mm. After being activated, the foils were placed in a Canberra Industries well chamber utilizing a NaI(Tl) scintillation detector. The resulting gamma spectrum was acquired and analyzed using Genie 2000 spectroscopy software. One activation foil was placed over the upper, left chest of RANDO where a pacemaker would be. The rest of the foils were placed over the midline of the patient at different distances, providing a spatial distribution over the phantom. Using lasers and BBs to align the patient, 200 MU square fields were delivered to various treatment sites: the brain, the pancreas, and the prostate. Each field was shot at least a day apart, giving more than enough time for activity of the foil to decay (t1=2 = 54.12 min). Results: The net counts (minus background) of the three aforementioned peaks were used for our measurements. These counts were adjusted to account for detector efficiency, relative photon yields from decay, and the natural abundance of 115-In. The average neutron flux for the closed multi-leaf collimator irradiation was measured to be 1.62 x 106 - 0.18 x 106 cm2 s-1. An order of magnitude estimate of the flux for neutrons up to 1 keV from Diffenderfer et al. gives 3 x 106 cm2 s-1 which does agree on the order of magnitude. Conclusion: Lower energy neutrons have higher interaction cross-sections and are more likely to damage pacemakers. The thermal/slow neutron component may be enough to estimate the overall risk. The true test of the applicability of activation foils is whether or not measurements are capable of predicting cardiac device malfunction. For that, additional studies are needed to provide clinical evidence one way or the other.

07 ISOTOPE AND RADIATION SOURCES↗

Superconducting properties of (Pb{sub 0.05}Sn{sub 0.95})Te doped with indium under conditions of hydrostatic compression

The superconducting properties of Pb{sub 0.05}Sn{sub 0.95}Te semiconductor alloy doped with 5 at % of In are investigated at a hydrostatic pressure of P < 7 kbar. At increasing pressure P > 1.35 kbar and T ≥ 1.3 K, the resistivity step to ρ = 0 in the temperature and magnetic-field dependences ρ(T) and ρ(H), which corresponds to the transition to the superconducting state, disappears. The experimental results are indicative of a decrease in the density of states at the Fermi level with increasing pressure, which can be interpreted as an indium-level shift deep into the valence band. The obtained data refine and supplement the results of studies devoted to investigation of the baric dependences of the critical parameters of the superconducting transition in (Pb{sub z}Sn{sub 1–z}){sub 0.95}In{sub 0.05}Te with varying lead content z.

36 MATERIALS SCIENCE↗

Superconductivity in epitaxially grown self-assembled indium islands: progress towards hybrid superconductor/semiconductor optical sources

Currently, superconducting qubits lead the way in potential candidates for quantum computing. This is a result of the robust nature of superconductivity and the non-linear Josephson effect which make possible many types of qubits. At the same time, transferring quantum information over long distances typically relies on the use of photons as the elementary qubit. Converting between stationary electronic qubits in superconducting systems and traveling photonic qubits is a challenging yet necessary goal for the interface of quantum computing and communication. The most promising path to achieving this goal appears to be the integration of superconductivity with optically active semiconductors, with quantum information being transferred between the two by means of the superconducting proximity effect. Obtaining good interfaces between superconductor and semiconductor is the next obvious step for improving these hybrid systems. As a result, we report on our observation of superconductivity in self-assembled indium structures grown epitaxially on the surface of semiconductor material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tunability of indium tin oxide materials for mid-infrared plasmonics applications

Transparent conductive oxides (TCOs) have emerged as alternative plasmonic materials in recent years to replace noble metals. The advantages of TCOs include CMOS compatibility, tunability of optical and structural properties, and reduced losses. In this work, we demonstrate how post-deposition annealing of indium tin oxide (ITO) films in oxygen atmosphere allows for tuning their optical dispersion properties to the mid-infrared spectral range while simultaneously reducing their absorption losses. In particular, we show a materials strategy that extends the epsilon-near-zero (ENZ) point of ITO from the near-infrared to the mid-infrared range. This is demonstrated by fabricating periodic arrays of ITO discs of varying diameters and characterizing their plasmonic resonances in the mid-infrared range from λ = 5 to 10 µm. The developed ITO plasmonic structures pave the way to the development of novel infrared active devices for sensing and spectroscopy on a silicon-compatible platform.

36 MATERIALS SCIENCE↗

Spatiotemporal refraction of light in an epsilon-near-zero indium tin oxide layer: frequency shifting effects arising from interfaces

When light travels through a medium in which the refractive index is rapidly changing with time, the light will undergo a shift in its frequency. Significant frequency shifting effects have recently been reported for transparent conductive oxides. These observations have been interpreted as emerging from temporal changes to the propagation phase in a bulk medium resulting from temporal variations in the refractive index. It is an effect referred to as temporal refraction. Here, we show that the frequency shift in an epsilon-near-zero layer made of indium tin oxide originates not only from this bulk response but includes a significant effect resulting from temporal changes to the spatial boundary conditions. This boundary effect can lead to a dominant, opposing shift to the bulk effect for certain angles. Hence, this process gives rise to a frequency shift that can be tailored through the angle, decoupling the amplitude and phase modulation.

Bohn, Justus (ORCID:0000000214376450)↗

On the correlation between the stress exponent for creep determined by nanoindentation and the mechanism of action enabling stress relief in indium

Instrumented indentation performed at room temperature with a Berkovich and 10 μm radius sphere has been used to measure the stress exponent for creep before and after the strain burst observed in well-annealed, high-purity indium. Before the strain burst, the measured values are successfully rationalized using a new model based on stress directed diffusional flow along the interface between the indenter tip and test specimen. After the strain burst, the measured stress exponents are found to be representative of dislocation glide and climb assisted glide. Here these results are compared and contrasted to the previous experimental investigations and modeling efforts of Feng et al., Lucas et al., and Li et al. Collectively, the experimental observations and rationalization presented here provide significant new insight into the mechanisms of action that control the competition for stress relief in small, constrained volumes of crystalline metals subjected to high homologous temperatures.

36 MATERIALS SCIENCE↗

Silver nanowire-indium zinc oxide composite flexible transparent conducting electrodes made by spin-coating and photonic curing

Flexible transparent conducting electrodes (TCE) play a critical role in modern technologies. Eliminating the high-temperature annealing of vacuum- or solution-deposited films will increase production throughput and lower the cost of the final products. Photonic curing uses intense pulses of broadband light to induce material transformations instead of heat. In this work, we combine solution deposition and photonic curing, replacing thermal annealing, to fabricate flexible composite TCE films on plastic polyethylene terephthalate (PET) substrates. The composite TCE films are composed of spin-coated silver nanowire-indium zinc oxide layers. Further, the TCE films’ electrical, optical, and morphological properties are investigated and compared to those of commercially available PET/TCE. A sheet resistance of 15 Ω/sq and an average transmittance from 400 – 700 nm of 77% are achieved with the spin-coated and photonic-cured composite flexible TCE films.

14 SOLAR ENERGY↗