Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Hybrid Work”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Composites for Advanced Drive Systems, A Systems Analysis-Revolutionary Vertical Lift Technology (RVLT)

Rotorcraft propulsion systems are continually looking to improve power density; that is reducing weight and increasing power throughput. In order to advance rotorcraft propulsion system technology, NASA Glenn Research Center (NGRC) contracted Boeing Vertical Lift (Contract #NNA15AB12B, Task Order NNA16BE07T) to perform system level benefit assessments for incorporation of composite materials into rotorcraft transmission gear and shaft systems, in the rotating frame. In general, the environment inside a typical rotorcraft transmission is aggressive for typical composite materials. Design challenges in the rotating frame and related safety risks must be understood and accounted for in the design. Boeing developed a technical approach that evaluated a relatively large population of rotorcraft main transmissions. This technical approach took rotorcraft from various size classes and configurations and applied parametric weight estimating principles to assess the performance impact of composite hybrid technologies inside transmissions, in the rotating frame. Parametric weight estimates showed that composite hybrid technologies account for an average 9% weight savings over the baseline transmissions. More weight savings may be observed when accounting for quantity of transmissions in an aircraft configuration and benefits to airframe, landing gear, and fuel systems. A weight reduction of 595 lbs was calculated for NASA's Large Civil Tilt Rotor (LCTR2) by utilizing composite hybrid components inside the Prop-Rotor Transmission in the rotating frame and accounting for design changes to the airframe, landing gear, and fuel system. In order to develop composite hybrid technologies, sub-scale and full-scale testing should continue, building on the work that NGRC has begun. Design and testing efforts should focus on technical challenges, such as joint and attachment interfaces, temperature effects, inspection procedures, and fault detection. It is recommended to address technical challenges with targeted research and development efforts, conducted at relevant scale, prior to incorporating composite hybrid technologies within the rotating frame of helicopter transmissions.

Darmstadt, Patrick R.↗
DOE OSTI2020

Exploring the role of electronic structure on photo-catalytic behavior of carbon-nitride polymorphs

A fully self-consistent density-functional theory (DFT) with improved functionals is used herein to provide a comprehensive account of structural, electronic, and optical properties of C 3 N 4 polymorphs. Using our recently developed van Leeuwen-Baerends (vLB) corrected local-density approximation (LDA), we implemented LDA + vLB within full-potential N th -order muffin-tin orbital (FP-NMTO) method and show that it improves structural properties and band gaps compared to semi-local functionals (LDA/GGA). We demonstrate that the LDA + vLB predicts band-structure and work-function for well-studied 2D-graphene and bulk-Si in very good agreement with experiments, and more exact hybrid functional (HSE) calculations as implemented in the Quantum-Espresso (QE) package. The structural and electronic-structure (band gap) properties of C 3 N 4 polymorphs calculated using FP-NMTO-LDA + vLB is compared with more sophisticated hybrid-functional calculations. We also perform detailed investigation of photocatalytic behavior using QE-HSE method of C 3 N 4 polymorphs through work-function, band (valence and conduction) position with respect to water reduction and oxidation potential. Our results show $γ$-C 3 N 4 as the best candidate for photocatalysis among all the C 3 N 4 polymorphs but it is dynamically unstable at ‘zero’ pressure. We show that $γ$-C 3 N 4 can be stabilized under hydrostatic-pressure, which improves its photocatalytic behavior relative to water reduction and oxidation potentials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Enhanced Rate Capability of Ion‐Accessible Ti 3 C 2 T x ‐NbN Hybrid Electrodes

Abstract Although 2D Ti 3 C 2 T x is a good candidate for supercapacitors, the restacking of nanosheets hinders the ion transport significantly at high scan rates, especially under practical mass loading (>10 mg cm −2 ) and thickness (tens of microns). Here, Ti 3 C 2 T x ‐NbN hybrid film is designed by self‐assembling Ti 3 C 2 T x with 2D arrays of NbN nanocrystals. Working as an interlayer spacer of Ti 3 C 2 T x , NbN facilitates the ion penetration through its 2D porous structure; even at extremely high scan rates. The hybrid film shows a thickness‐independent rate performance (almost the same rate capabilities from 2 to 20 000 mV s −1 ) for 3 and 50 µm thick electrodes. Even a 109 µm thick Ti 3 C 2 T x ‐NbN electrode shows a better rate performance than 25 µm thick pure Ti 3 C 2 T x electrodes. This method may pave a way to controlling ion transport in electrodes composed of 2D conductive materials, which have potential applications in high‐rate energy storage and beyond.

Wang, Hao↗
DOE OSTI2022

Interspace and Vacancy Modulation: Promoting the Zinc Storage of an Alcohol-Based Organic–Inorganic Cathode in a Water–Organic Electrolyte

Expanding interspace and introducing vacancies are desired to promote the mobility of Zn ions and unlock the inactive sites of layered cathodes. However, this two-point modulation has not yet been achieved simultaneously in vanadium phosphate. Here, in this work, a strategy is proposed for fabricating an alcohol-based organic–inorganic hybrid material, VO 1–x PO 4 ·0.56C 6 H 14 O 4 , to realize the conjoint modulation of the d-interspace and oxygen vacancies. Peculiar triglycol molecules with an inclined orientation in the interlayer also boost the improvement in the conversion rate of V 5+ to V 4+ and the intensity of the P—O bond. Their synergism can ensure steerable adjustment for intercalation kinetics and electron transport, as well as realize high chemical reactivity and redox-center optimization, leading to at least 200% increase in capacity. Using a water–organic electrolyte, the designed Zn-ion batteries with an ultrahigh-rate profile deliver a long-term durability (fivefold greater than pristine material) and an excellent energy density of ≈142 Wh kg –1 (including masses of cathode and anode), thereby substantially outstripping most of the recently reported state-of-the-art zinc-ion batteries. This work proves the feasibility to realize the two-point modulation by using organic intercalants for exploiting high-performance new 2D materials.

25 ENERGY STORAGE↗
DOE OSTI2022

Final Technical Report for "Cloud-based Low-Scaling Quantum Chemistry Simulations for Materials"

The objective of phase I was to develop the basic infrastructure for performing efficient hybrid DFT calculations on solid materials with a turnaround time amenable to the use in large-scale data-driven approaches. To fulfill the goal we have developed a novel algorithm that significantly reduces the cost of exchange matrix formation. The algorithm does so by making use of three ingredients (a) interpolative decomposition of the electron integrals (b) robust pseudospectral method and (c) occ-RI approach. Our published work demonstrates that the algorithm is orders of magnitude faster than any other hybrid-DFT method and is on the order of only 3-4 times slower than pure DFT. All steps of the algorithm developed during phase I can be accelerated to the point that, for large enough systems, the diagonalization of the Fock matrix will become the most expensive step. To treat such large systems we have created an interface to the ASCR-funded PEXSI library. The PEXSI method is used to compute the density matrix directly from the Fock matrix in a manner that preserves the sparsity of the local representation.

Shiozaki, Toru↗
NASA NTRS1999

Fabrication Of Carbon-Boron Reinforced Dry Polymer Matrix Composite Tape

Future generation aerospace vehicles will require specialized hybrid material forms for component structure fabrication. For this reason, high temperature composite prepregs in both dry and wet forms are being developed at NASA Langley Research Center (LaRC). In an attempt to improve compressive properties of carbon fiber reinforced composites, a hybrid carbon-boron tape was developed and used to fabricate composite laminates which were subsequently cut into flexural and compression specimens and tested. The hybrid material, given the designation HYCARB, was fabricated by modifying a previously developed process for the manufacture of dry polymer matrix composite (PMC) tape at LaRC. In this work, boron fibers were processed with IM7/LaRC(TradeMark)IAX poly(amide acid) solution-coated prepreg to form a dry hybrid tape for Automated Tow Placement (ATP). Boron fibers were encapsulated between two (2) layers of reduced volatile, low fiber areal weight poly(amide acid) solution-coated prepreg. The hybrid prepreg was then fully imidized and consolidated into a dry tape suitable for ATP. The fabrication of a hybrid boron material form for tow placement aids in the reduction of the overall manufacturing cost of boron reinforced composites, while realizing the improved compression strengths. Composite specimens were press-molded from the hybrid material and exhibited excellent mechanical properties.

Belvin, Harry L.↗
DOE OSTI2021

A New Type of Hybrid Copper Iodide as Nontoxic and Ultrastable LED Emissive Layer Material

Perovskite-based light-emitting diodes (PeLEDs) are promising candidates for next-generation solid-state lighting and display technologies. However, all current high-performance PeLEDs contain a toxic element (lead) and suffer from relatively low stability. Herein, we report a new type of lead-free LED using low-cost, eco-friendly, and robust copper(I) iodide hybrid material as the emissive layer (EML). Specifically, they are composed of copper iodide chains and organic ligands through ionic and coordinate bonds. Their remarkable stability and solution processability stem from this unique multifold bonding feature. High-quality thin films of 1D-Cu 4 I 6 (bttmp) 2 were fabricated by a simple, one-step spin-coating process. They exhibit high photoluminescence quantum yield (91%) and long-term air stability (>2000 h). An EQE of 5.02% was achieved for a prototype yellow LED using 1D-Cu 4 I 6 (bttmp) 2 EML. Its half-lifetime of 35.5 h obtained in open air outperforms that of most PeLEDs reported to date. Finally, this work opens a new direction for making LEDs based on ecofriendly and robust hybrid materials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Leveraging Hamiltonian simulation techniques to compile operations on bosonic devices

Circuit quantum electrodynamics enables the combined use of qubits and oscillator modes. Despite a variety of available gate sets, many hybrid qubit-boson (i.e. qubit-oscillator) operations are realizable only through optimal control theory, which is oftentimes intractable and uninterpretable. We introduce an analytic approach with rigorously proven error bounds for realizing specific classes of operations via two matrix product formulas commonly used in Hamiltonian simulation, the Lie–Trotter–Suzuki and Baker–Campbell–Hausdorff product formulas. We show how this technique can be used to realize a number of operations of interest, including polynomials of annihilation and creation operators, namely (a) p (a † ) q for integer p, q. We show examples of this paradigm including obtaining universal control within a subspace of the entire Fock space of an oscillator, state preparation of a fixed photon number in the cavity, simulation of the Jaynes–Cummings Hamiltonian, and simulation of the Hong-Ou-Mandel effect. This work demonstrates how techniques from Hamiltonian simulation can be applied to better control hybrid qubit-boson devices.

bosonic qubits↗
DOE OSTI2021

Unraveling the Formation Mechanism of a Hybrid Zr-Based Chemical Conversion Coating with Organic and Copper Compounds for Corrosion Inhibition

Environmental-friendly chromate-free, zirconium (Zr)-based conversion coating is a promising green technology for corrosion protection. Additives in the surface treatment provides critical functionalities and performance improvements; however, mechanistic understanding as of how the additives influence the coatings remains unclear. In this study, a new organic-inorganic hybrid Zrbased conversion coating which combines copper (Cu) compounds and polyamidoamine (PAMAM), taking advantages of a complementary nature of organic and inorganic additives. Here, a multimodal approach combining electron and X-ray characterization is applied to study the interaction of Cu 2+ and PAMAM and the resulting impacts on the coating formation. Adding PAMAM changed the surface morphology, thickness, distribution of Cu in the cluster and void formation of the coatings. High PAMAM (100-200 pm) leads to little conversion coating formation, and low PAMAM (0-25 ppm) shows voids formation under the coatings. Moreover, PAMAM incorporates in the coating in a form of PAMAM-Cu complex with a higher concentration towards the surface, provides an organic layer at the surface of the coating. X-ray absorption near-edge structure (XANES) spectroscopy shows a difference between the conventional and hybrid coating treatments in an alkaline solution to simulate the E-coat process, suggesting the contribution of PAMAM in the enhanced chemical stability in an alkaline environment. Therefore, an intermediate range of addition of PAMAM (50 ppm) is optimal to 1) avoid excessive voids formation, 2) promote some Cu cluster formation and thus enhancing the Zr-based coating formation and 3) incorporate organic components into the coating to improve the adhesion of the subsequent coatings. Overall, this work furthers our knowledge on the formation mechanism of an effective and environmentally friendly hybrid conversion coating for corrosion inhibition, demonstrating a critical processing-structureproperty relationship. This study will benefit future development of green and effective surface treatment technology.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Localizing Low-Grade Heat Using Hybrid Photonic-Phononic Materials

Creating next-generation devices capable of transducing waste heat into useful work will require building blocks designed to direct low-grade thermal energy at length scales well below the diffraction limit. Characterizing thermally induced energy transfer at the nanoscale, however, is a formidable task due to the simultaneous demand of high spatial and spectral resolution at infrared energies. Leveraging recent advancements in electron energy loss (EEL) and gain (EEG) spectroscopy, we reveal that individual nanostructures can concentrate energy by the resonant thermal excitation of their photonic Fabry–Pérot modes. Specifically, we show that the spatially localized gain signal increases upon in situ heating. Finally, theoretical modeling elucidates the mechanism for these observations by showing that a Purcell enhancement in the local photonic density of states drives the increased rate of infrared energy transfer from the ambient environment to each nanostructure.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Precisely modulate interfacial Bi-O bridge bond in Co-TCPP/Bi 3 O 4 Br to trigger long-lasting charge separation for boosting CO 2 photoreduction

Insufficient charge separation and feeble CO 2 activation limit the CO 2 photoreduction efficiency. It is highly desirable to consciously construct organic–inorganic hybrid composites to simultaneously accelerate charge separation and provide favorable active sites. Herein, a defect-induced interfacial Bi-O bridge bond is constructed by grafting terminal O of cobalt porphyrin (Co-TCPP) with Bi 3 O4Br. Systematic investigations reveal that the Bi-O bridge bond as the charge migration bridge accelerates the extraction and transfer of electron from the external [Bi 3 O 4 ] layers to Co-TCPP, and the millisecond separation lifetime of electrons on Co-TCPP can be achieved. Co atoms as the active sites optimized the CO 2 adsorption and activation, thus promoting the formation of COOH*. As a result, the CO 2 photoreduction rate of 0.5% Co-TCPP/Bi 3 O4Br reaches 71.3 μmol g -1 h -1 in pure water, 2.53-fold of that on the pristine Bi 3 O4Br. This work provides atomistic insights and strategies for the construction of new organic–inorganic hybrid materials for artificial photosynthesis and CO 2 photoreduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1992

Grid generation research at OSU

In the last two years, effort was concentrated on: (1) surface modeling; (2) surface grid generation; and (3) 3-D flow space grid generation. The surface modeling shares the same objectives as the surface modeling in computer aided design (CAD), so software available in CAD can in principle be used for solid modeling. Unfortunately, however, the CAD software cannot be easily used in practice for grid generation purposes, because they are not designed to provide appropriate data base for grid generation. Therefore, we started developing a generalized surface modeling software from scratch, that provides the data base for the surface grid generation. Generating surface grid is an important step in generating a 3-D space for flow space. To generate a surface grid on a given surface representation, we developed a unique algorithm that works on any non-smooth surfaces. Once the surface grid is generated, a 3-D space can be generated. For this purpose, we also developed a new algorithm, which is a hybrid of the hyperbolic and the elliptic grid generation methods. With this hybrid method, orthogonality of the grid near the solid boundary can be easily achieved without introducing empirical fudge factors. Work to develop 2-D and 3-D grids for turbomachinery blade geometries was performed, and as an extension of this research we are planning to develop an adaptive grid procedure with an interactive grid environment.

Nakamura, S.↗
DOE OSTI2021

The Value of Watching How Materials Grow: A Multimodal Case Study on Halide Perovskites

Material synthesis is one of the most important aspects in humankinds’ endeavor to discover and create new materials for energy applications. One strategy to tailor materials with desired functions in a rational way is by knowing how functions relate to structure, synthetic variables, arrangement of atoms and molecules, and how functions evolve during synthesis. In order to accelerate materials synthesis, discovery, and optimization by 10 times it is the right time now to integrate computational tools, synthesis, and characterization. One particular barrier to realizing this concept is the understanding of when and how phases form in real time during synthesis, which is challenging to asses by existing theoretical frameworks. In addition, transient or metastable phases with positive free energy above the lowest-free energy ground state can be revealed by such real time (in situ) measurements. Metastable materials are ubiquitous in condensed matter and can show superior properties compared to their equilibrium form. This work discusses the value of emerging multimodal in situ characterizations exemplified on hybrid halide perovskites. Finally, the ways in which the implementation of in situ measurements can advance the materials science synthesis field as well as their role to enable close-loop feedback control and autonomous synthesis are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2021

High Interfacial-Energy and Lithiophilic Janus Interphase Enables Stable Lithium Metal Anodes

The stability of solid electrolyte interphase (SEI) layers is critical for developing lithium (Li) metal batteries. However, the fabrication of stable SEI layers is plagued by un-controlled structures, properties, and functions. In this work a controllable design of an ordered LiF-rich and lithiophilic hybrid Janus interphase (LiF-HJI) is reported using organic fluorination reagent as a functional SEI precursor. The LiF-HJI with a lower crystalline LiF layer and an upper Li organosulfide layer provides high interfacial energy with the Li metal and strong Li-ion affinity, allows homogenous Li-ion distribution, fast and uniform Li-ion transport, and excellent mechanical and passivation properties, enabling stable Li metal anodes under harsh conditions, such as high deposition capacities (6 mA h cm -2 ), current densities (10 mA cm -2 ), and rates (5 C). Stable LiF-HJI@Li greatly improves cycling stability and capacity retention (80.1% after 300 cycles) of Li||LiNi 0.8 Co 0.1 Mn 0.1 O 2 cells at a commercial-level areal capacity (≈4.2 mA h cm -2 ). Even under a lean-electrolyte condition of 3 g Ah -1 , 80% capacity retention can be maintained after 100 cycles, demonstrating excellent cycling performance under such harsh conditions.

25 ENERGY STORAGE↗
DOE OSTI2020

Grain boundary segregation beyond the dilute limit: Separating the two contributions of site spectrality and solute interactions

Solute segregation at grain boundaries (GBs) is known to have a profound impact on material properties, and as such is becoming routinely used as an element in alloy design. Beyond the dilute limit, the extent of solute GB segregation is known to be concentration dependent. Using hybrid Monte Carlo/Molecular Statics simulations of Mg segregation in Al, in this work we decouple the two contributions to this composition dependence: (i) spectrality of atomic environments at the boundary and (ii) solute-solute interactions. Although only contribution (ii) is typically considered in the literature, we argue that both contributions are equally important to understand concentration dependence and correctly quantify GB solute segregation in a binary alloy. Finally, a thermodynamic segregation isotherm is outlined that accounts for both the spectrality of grain boundary sites and solute-solute interactions. Unlike classical isotherms like those of McLean or Fowler-Guggenheim, which can be successfully fitted to GB segregation data only over a limited range of composition and temperature, our proposed model is shown to be accurate across the composition-temperature space.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Statistical and systematic uncertainties in extracting the source properties of neutron star-black hole binaries with gravitational waves

Gravitational waves emitted by neutron star black hole mergers encode key properties of neutron stars - such as their size, maximum mass and spins - and black holes. However, the presence of matter and the high mass ratio makes generating long and accurate waveforms from these systems hard to do with numerical relativity, and not much is known about systematic uncertainties due to waveform modeling. In this work, we simulate gravitational waves from neutron star black hole mergers by hybridizing numerical relativity waveforms produced with the SpEC code with a recent numerical relativity surrogate NRHybSur3dq8Tidal. These signals are analyzed using a range of available waveform families, and statistical and systematic errors are reported. We find that at a network signal-to-noise ratio (SNR) of 30, statistical uncertainties are usually larger than systematic offsets, while at an SNR of 70 the two become comparable. The individual black hole and neutron star masses, as well as the mass ratios, are typically measured very precisely, though not always accurately at high SNR. At a SNR of 30 the neutron star tidal deformability can only be bound from above, while for louder sources it can be measured and constrained away from zero. All neutron stars in our simulations are non-spinning, but in no case we can constrain the neutron star spin to be smaller than ~0.4 (90% credible interval). Waveform families whose late inspiral has been tuned specifically for neutron star black hole signals typically yield the most accurate characterization of the source parameters. Their measurements are in tension with those obtained using waveform families tuned against binary neutron stars, even for mass ratios that could be relevant for both binary neutron stars and neutron star black holes mergers.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

AMM: Adaptive Multilinear Meshes

Adaptive representations are increasingly indispensable for reducing the in-memory and on-disk footprints of large-scale data. Usual solutions are designed broadly along two themes: reducing data precision, e.g., through compression, or adapting data resolution, e.g., using spatial hierarchies. Additionally, recent research suggests that combining the two approaches, i.e., adapting both resolution and precision simultaneously, can offer significant gains over using them individually. However, there currently exist no practical solutions to creating and evaluating such representations at scale. In this work, we present a new resolution-precision-adaptive representation to support hybrid data reduction schemes and offer an interface to existing tools and algorithms. Through novelties in spatial hierarchy, our representation, Adaptive Multilinear Meshes (AMM), provides considerable reduction in the mesh size. AMM creates a piecewise multilinear representation of uniformly sampled scalar data and can selectively relax or enforce constraints on conformity, continuity, and coverage, delivering a flexible adaptive representation. AMM also supports representing the function using mixed-precision values to further the achievable gains in data reduction. We describe a practical approach to creating AMM incrementally using arbitrary orderings of data and demonstrate AMM on six types of resolution and precision datastreams. By interfacing with state-of-the-art rendering tools through VTK, we demonstrate the practical and computational advantages of our representation for visualization techniques. With an open-source release of our tool to create AMM, we make such evaluation of data reduction accessible to the community, which we hope will foster new opportunities and future data reduction schemes.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Reconfiguring band-edge states and charge distribution of organic semiconductor–incorporated 2D perovskites via pressure gating

Two-dimensional (2D) semiconductor heterostructures are key building blocks for many electronic and optoelectronic devices. Reconfiguring the band-edge states and modulating their interplay with charge carriers at the interface in a continuous manner have long been sought yet are challenging. Here, using organic semiconductor–incorporated 2D halide perovskites as the model system, we realize the manipulation of band-edge states and charge distribution via mechanical—rather than chemical or thermal—regulation. Compression induces band-alignment switching and charge redistribution due to the different pressure responses of organic and inorganic building blocks, giving controllable emission properties of 2D perovskites. We propose and demonstrate a “pressure gating” strategy that enables the control of multiple emission states within a single material. We also reveal that band-alignment transition at the organic-inorganic interface is intrinsically not well resolved at room temperature owing to the thermally activated transfer and shuffling of band-edge carriers. This work provides important fundamental insights into the energetics and carrier dynamics of hybrid semiconductor heterostructures.

42 ENGINEERING↗