Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HoP”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Nontrivial fusion of Majorana zero modes in interacting quantum-dot arrays

Motivated by recent experimental reports of Majorana zero modes (MZMs) in quantum-dot systems at the “sweet spot,” where the electronic hopping t ℎ is equal to the superconducting coupling Δ, we study the time-dependent spectroscopy corresponding to the nontrivial fusion of MZMs. The term “nontrivial” refers to the fusion of Majoranas from different original pairs of MZMs, each with well-defined parities. We employ an experimentally accessible time-dependent real-space local density-of-states (LDOS) method to investigate the nontrivial MZM fusion outcomes in canonical chains and in a Y-shaped array of interacting electrons. In the case of quantum-dot chains where two pairs of MZMs are initially disconnected, after fusion we find equal-height peaks in the electron and hole components of the LDOS, signaling nontrivial fusion into both the vacuum I and fermion Ψ channels with equal weight. For π-junction quantum-dot chains, where the superconducting phase has opposite signs on the left and right portions of the chain, after the nontrivial fusion we observed the formation of an exotic two-site MZM near the center of the chain, coexisting with another single-site MZM. Furthermore, we also studied the fusion of three MZMs in the Y-shaped geometry. In this case, after the fusion we observed the novel formation of another exotic multisite MZM, with properties depending on the connection and geometry of the central region of the Y-shaped quantum-dot array.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Topological material in the III–V family: Heteroepitaxial InBi on InAs

InBi ( 0 0 1 ) is formed epitaxially on InAs ( 1 1 1 ) -A by depositing Bi onto an In-rich surface. Angle-resolved photoemission measurements reveal topological electronic surface states, close to the M ¯ high symmetry point. This demonstrates a heteroepitaxial system entirely in the III–V family with topological electronic properties. InBi shows coexistence of Bi and In surface terminations, in contradiction with other III–V materials. For the Bi termination, the study gives a consistent physical picture of the topological surface electronic structure of InBi ( 0 0 1 ) terminated by a Bi bilayer rather than a surface formed by splitting to a Bi monolayer termination. Theoretical calculations based on relativistic density functional theory and the one-step model of photoemission clarify the relationship between the InBi ( 0 0 1 ) surface termination and the topological surface states, supporting a predominant role of the Bi bilayer termination. Furthermore, a tight-binding model based on this Bi bilayer termination with only Bi–Bi hopping terms, and no Bi–In interaction, gives a deeper insight into the spin texture. Published by the American Physical Society 2024

Nicolaï, Laurent (ORCID:0000000277312673)↗
DOE OSTI2025

Emergent interaction-induced topology in Bose-Hubbard ladders

We investigate the quantum many-body dynamics of bosonic atoms hopping in a two-leg ladder with strong on-site contact interactions. We observe that when the atoms are prepared in a staggered pattern with pairs of atoms on every other rung, singlon defects, i.e., rungs with only one atom, can localize due to an emergent topological model, even though the underlying model in the absence of interactions admits only topologically trivial states. This emergent topological localization results from the formation of a zero-energy edge mode in an effective lattice formed by two adjacent chains with alternating strong and weak hoping links (Su-Schrieffer-Heeger chains) and opposite staggering which interface at the defect position. Our findings open the opportunity to dynamically generate nontrivial topological behaviors without the need for complex Hamiltonian engineering. Published by the American Physical Society 2025

Wellnitz, David (ORCID:0000000349788938)↗
DOE OSTI2026

Investigating the electrical transport properties and electronic structure of Zr 2 ⁢CuSb 3

The checkerboard lattice has been proposed to host topological flat bands as a result of destructive interference among its various electronic hopping terms. However, it has proven challenging to realize experimentally due to the difficulty of isolating this structure from any significant out-of-plane bonding while maintaining structural integrity. Here, in this study, single crystals of Zr 2 CuSb 3 , a potential candidate for the checkerboard lattice, were synthesized using the solution (self-flux) method, and their structure was confirmed via x-ray diffraction. Electrical-transport measurements indicate metallic behavior with electron-dominated carriers. Angle-resolved photoemission spectroscopy reveals multiple electron pockets and significant k z broadening due to its large c axis and low dispersion features in k z . Density-functional theory (DFT) calculations further disentangle the contributions from each high-symmetry plane, providing a comprehensive characterization of electronic behavior. The DFT calculations were then used to determine the orbital contributions of the bands and detect the out-of-plane bonding which prevented the flat bands from forming.

Downey, Eoghan [Univ. of Michigan, Ann Arbor, MI (↗
DOE OSTI2025

Engineering 2D Square Lattice Hubbard Models in 90° Twisted GeX/SnX (X =S, Se) Moiré Superlattices

Because of the large-period superlattices emerging in moiré two-dimensional (2D) materials, electronic states in such systems exhibit low energy flat bands that can be used to simulate strongly correlated physics in a highly tunable setup. While many investigations have thus far focused on moiré flat bands and emergent correlated electron physics in triangular, honeycomb, and quasi-one-dimensional lattices, tunable moiré realizations of square lattices subject to strong correlations remain elusive. Here, in this work, we propose a feasible scheme to construct moiré square lattice systems by twisting two or more layers of 2D materials in a rectangular lattice by 90°. We demonstrate the concept with twisted GeX/SnX (X =S, Se) moiré superlattices and calculate their electronic structures from first principles. We show that the lowest conduction flat band in these systems can be described by a square lattice Hubbard model with parameters which can be controlled by varying the choice of host materials, number of layers, and external electric fields. In particular, twisted double bilayer GeSe realizes a square lattice Hubbard model with strong frustration due to the next-nearest-neighbor hopping that could host unconventional superconductivity, in close analogy to the Hubbard model for copper-oxygen planes of cuprate high-temperature superconductors. The presented scheme uses 90° twisted 2D materials with rectangular unit cells as a promising platform for realizing the physical phenomena of square lattice Hubbard models, establishing a new route for studying its rich phase diagram of magnetism, charge order, and unconventional superconductivity in a highly tunable setting.

2-dimensional systems↗
DOE OSTI2022

Peer-to-Peer Communication Trade-Offs for Smart Grid Applications: Preprint

Peer-to-peer energy management systems for smart grids require developers to consider the trade-offs between the amount of communication traffic generated and the quality and speed of convergence of the control algorithms that are deployed. Employing a fully connected communication causes messages to scale exponentially with the number of nodes, while using a sparse connectivity causes less information dissemination leading to degradation of the algorithm performance. The best communication topology for a particular application lies somewhere in between and often requires empirical evaluation by application designers. Existing methods do not put focus on the needs for smart grid applications, which is information dissemination throughout the network and they do not provide a flexible solution for application developers to prototype and deploy different topologies without modifying the application code. This paper introduces a configurable virtual communication topology framework TopLinkMgr, allowing users to specify any chosen communication topology and deploy peer-to-peer applications using it. It also introduces a self-adaptive, fault-tolerant topology management algorithm, Bounded Path Dissemination that can ensure the dissemination of information to all peers within a specified threshold for a sparsely connected topology. Experiments show that the algorithm improves on convergence speed and accuracy over state-of-the-art methods and is also robust against node failures. The results indicate the possibility of achieving a close-to optimal convergence without overloading the network allowing the realization of peer-to-peer control platforms covering larger and more complex power systems.

Bounded Path Dissemination↗
DOE OSTI2025

Graph-Based Attention Mechanisms for Solving the AC Optimal Power Flow Problem in Electrical Power Networks

With the increasing complexity and data availability in modern power systems, learning-based approaches to AC Optimal Power Flow (AC OPF) have garnered significant attention. In particular, the structure of smart grids lends itself naturally to graph-based representations, where Graph Neural Networks (GNNs) can capture spatial and relational dependencies. This paper investigates attention-based GNN architectures tailored to heterogeneous graph representations of electric grids. We evaluate two major paradigms: relational attention, which distinguishes between edge types during message passing, and meta-path attention, which captures high-level semantics through multi-hop, typed paths. Using a large corpus of public AC OPF scenarios, we benchmark representative models of each type of attention. Our results demonstrate the benefits of heterogeneous attention-based models in accurately capturing grid dynamics; heterogeneous attention models achieve superior performance in both standard and perturbed settings. The findings highlight the importance of semantic-aware architectures for improving prediction robustness and interpretability in power system applications.

Trigui, Ali [Qubit Engineering Inc.]↗
DOE OSTI2024

Transmission Interface Limits for High-Spatial Resolution Capacity Expansion Modeling

Large-scale capacity expansion models typically rely on estimates of the power transfer limits between modeled zones. Accurate estimation of these interface transfer limits (ITLs) requires modeling the underlying transmission network. Here we expand on a maximum flow optimization method that uses linearized power flow to estimate transfer limits. We apply this method to a data set of the U.S. transmission network to estimate ITLs between U.S. counties. By calculating ITLs using different subsets of the network, we evaluate how the size of the network used in the estimation affects the results. The results show diminishing returns to ITL accuracy after six hops, suggesting that a network subset can reasonably be used to approximate ITLs. The county-level estimates produced in this study will support more spatially resolved capacity expansion modeling and will help inform policy making at local and national levels.

capacity planning↗
DOE OSTI2023

A Scalable PDC Placement Technique for Fast and Resilient Monitoring of Large Power Grids

The wide-area measurement system (WAMS) is a key enabler of real-time monitoring of power grids. The essential goals of WAMS design are fast and resilient data transfer from phasor measurement units (PMU) to phasor data concentrators (PDC). We propose a scalable two-stage PDC placement technique for minimizing the end-to-end delay while maintaining resiliency. In the prescreening stage, the plausible candidates of PDC configurations are identified based on a graph theory-based multi-median function (MMF). Here, in this article, a computationally efficient meta-heuristic algorithm is used to address scalability. In the candidate selection stage, two different algorithms, namely, Suurballe's and Dijkstra's, are employed to identify the best of those plausible PDC configurations as the final design. This technique not only minimizes the hop paths between PMUs and PDCs, but also ensures network resiliency against single PMU, PDC, or communication link failure by incorporating the roles of PMUs in power grid observability into routing policy. Simulation results on the IEEE 57-bus test power system and the 2000-bus test power system demonstrate the effectiveness and scalability of the proposed technique.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

Buyers Collusion in Incentivized Forwarding Networks: A Multi-Agent Reinforcement Learning Study

We present the issue of monetarily incentivized forwarding in a multi-hop mesh network architecture from an economic perspective. It is anticipated that credit-incentivized forwarding and relaying will be a simple method of exchanging transmission power and spectrum for connectivity. However, gateways and forwarding nodes, like any other free market, may create an oligopolistic market for the users they serve. In this study, a coalition scheme between buyers aims to address price control by gateways or nodes closer to gateways. In a Stackelberg competition game, buyer agents (users) and sellers (gateways) make decisions using reinforcement learning (RL), with decentralized Deep Q-Networks to buy and sell forwarding resources. We allow communication links between the buyers with a limited messaging space, without defining a collusion mechanism. The idea is to demonstrate that through messaging, and RL tacit collusion can emerge between agents in a decentralized setup. The multi-agent reinforcement learning (MARL) system is presented and analyzed from a machine-learning perspective. Moreover, MARL dynamics are discussed via mean field analysis to better understand divergence causes and make implementation recommendations for such systems. Finally, the simulation results show the results of coordination among the users.

42 ENGINEERING↗
DOE OSTI2022

Interference Moral Hazard in Large Multihop Networks

Cooperation between network nodes is critical for supporting services in ad hoc networks. Cooperation, however, is an idealized assumption that may not always be present. This assumption can fail because of moral hazard, a scenario in part caused by misaligned incentives between the requesting node and supporting node. In this paper, we characterize a moral hazard that perversely incentivizes nodes to increase their routing payments by transmitting interference into the multi-hop network. We refer to this as the interference moral hazard (IMH) problem which is inherent to strategyproof mechanisms with low overpayments. We investigate IMH as a non-cooperative game played by network nodes on a random graph. For large networks, we show that IMH can be solved in the network design space. Finally, we provide sufficient conditions on the network distribution that guarantee an equilibrium path with interference-free play. This is achieved by 1) lower-bounding the number of nodes and 2) bounding the network density slightly above the 2-connectedness threshold and below a proposed upper-bound. Simulations suggest that density plays a fundamental role in IMH.

42 ENGINEERING↗
DOE OSTI2022

The role of Co valence in charge transport in the entropy‐stabilized oxide (Mg 0.2 Co 0.2 Ni 0.2 Cu 0.2 Zn 0.2 )O

Abstract Many of the studies on the entropy‐stabilized oxide (Mg 0.2 Co 0.2 Ni 0.2 Cu 0.2 Zn 0.2 )O have been heavily application‐based. Previous works have studied effects of cation stoichiometry on the entropy‐driven reaction to form a single phase, but a fundamental exploration of the effects of anion stoichiometry and/or redox chemistry on electrical properties is lacking. Using near‐edge X‐ray absorption fine structure (NEXAFS) and electrical measurements, we show that oxidizing thin film samples of (Mg 0.2 Co 0.2 Ni 0.2 Cu 0.2 Zn 0.2 )O affects primarily the valence of Co, leaving the other cations in this high‐entropy system unchanged. This oxidation increases electrical conduction in these thin films, which occurs via small polaron hopping mediated by the Co valence shift from 2+ to a mixed 2+/3+ state. In parallel, we show that bulk samples sintered in an oxygen‐rich atmosphere have a lower activation energy for electrical conduction than those equilibrated in a nitrogen (reducing) atmosphere. Combining feasible defect compensation scenarios with electrical impedance measurements and NEXAFS data, we propose a self‐consistent interpretation of Co redox‐mediated small polaron conduction as the dominant method of charge transfer in this system.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Oxygen vacancy migration and impact on high voltage DC polarization in 0.8BaTiO 3 –0.2BiZn 0.5 Ti 0.5 O 3

Electrical polarization and defect transport are examined in 0.8BaTiO 3 –0.2BiZn 0.5 Ti 0.5 O 3 , an attractive capacitor material for high power electronics. Oxygen vacancies are suggested to be the majority charge carrier at or below 250°C with a grain conduction hopping activation energy of 0.97 eV and 0.92 eV for thermally stimulated depolarization current (TSDC) and impedance spectroscopy measurements, respectively. At higher temperature, thermally generated electronic conduction with an activation energy of 1.6 eV is dominant. Significant oxygen vacancy concentration is indicated (up to ~1%) due to cation vacancy formation (i.e., acceptor defects) from observed Bi (and likely Zn) volatility. Oxygen vacancy diffusivity is estimated to be 10 -12.8 cm 2 /s at 250°C. Low diffusivity and high activation energies are indicative of significant defect interactions. Dipolar oxygen vacancy defects are also indicated, with an activation energy of 0.59 eV from TSDC measurements. In conclusion, the large oxygen vacancy content leads to a short lifetime during high voltage (30 kV/cm), high temperature (250°C) direct current (DC) electrical measurements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Phylogenomic analysis of the hemp family (Cannabaceae) reveals deep cyto‐nuclear discordance and provides new insights into generic relationships

Abstract Cannabaceae are a relatively small family of angiosperms, but they include several species of huge economic and cultural significance: marijuana or hemp ( Cannabis sativa ) and hops ( Humulus lupulus ). Previous phylogenetic studies have clarified the most deep relationships in Cannabaceae, but relationships remain ambiguous among several major lineages. Here, we sampled 82 species representing all genera of Cannabaceae and utilized a new dataset of 90 nuclear genes and 82 chloroplast loci from Hyb‐Seq to investigate the phylogenomics of Cannabaceae. Nuclear phylogenetic analyses revealed a robust and consistent backbone for Cannabaceae. We observed nuclear gene‐tree conflict at several deep nodes in inferred species trees, also cyto‐nuclear discordance concerning the relationship between Gironniera and Lozanella and the relationships among Trema s.l. (including Parasponia ), Cannabis + Humulus , and Chaetachme + Pteroceltis . Coalescent simulations and network analyses suggest that observed deep cyto‐nuclear discordances were most likely to stem from incomplete lineage sorting (ILS); nuclear gene‐tree conflict might be caused by both ILS and gene flow between species. All genera of Cannabaceae were recovered as monophyletic, except for Celtis , which consisted of two distinct clades: Celtis I (including most Celtis species) and Celtis II (including Celtis gomphophylla and Celtis schippii ). We suggest that Celtis II should be recognized as the independent genus Sparrea based on both molecular and morphological evidence. Our work provides the most comprehensive and reliable phylogeny to date for Cannabaceae, enabling further exploration of evolutionary patterns across this family and highlighting the necessity of comparing nuclear with chloroplast data to examine the evolutionary history of plant groups.

Plant Sciences↗
DOE OSTI2025

Ab initio prediction of rapid kinetics of Fe impurities in δ -Pu

Here, we study the formation energies of iron impurities in δ-Pu within spin–orbital-polarized density functional theory (SOP-DFT). The thermodynamic solubility limit of iron in δ-Pu is calculated, indicating low miscibility. We show that surprisingly, Fe impurities at equilibrium are almost equally likely to occupy octahedral interstitial sites or substitutional sites, with slight preference for the former. In contrast, we find the energy of the tetrahedral interstitial Fe to be nearly 1 eV higher than the octahedral one. We explore the energy landscape for Fe impurity hopping diffusion and conclude that Fe impurities in δ-Pu are divided into two populations: (i) Immobile substitutional Fe impurities and (ii) highly mobile interstitial Fe impurities. The latter, (ii), migrate between octahedral interstitial sites with an energy barrier of around 0.2 eV. The energy barrier for exchange between the two populations is calculated to exceed 0.7 eV. Finally, we discuss the role of magnetic order on the impurity energetics.

Atomic structure↗
DOE OSTI2020

Low-frequency lattice phonons in halide perovskites explain high defect tolerance toward electron-hole recombination

Low-cost solution-based synthesis of metal halide perovskites (MHPs) invariably introduces defects in the system, which could form Shockley-Read-Hall (SRH) electron-hole recombination centers detrimental to solar conversion efficiency. Here, we investigate the nonradiative recombination processes due to native point defects in methylammonium lead halide (MAPbI 3 ) perovskites using ab initio nonadiabatic molecular dynamics within surface-hopping framework. Regardless of whether the defects introduce a shallow or deep band state, we find that charge recombination in MAPbI 3 is not enhanced, contrary to predictions from SRH theory. We demonstrate that this strong tolerance against defects, and hence the breakdown of SRH, arises because the photogenerated carriers are only coupled with low-frequency phonons and electron and hole states overlap weakly. Both factors appreciably decrease the nonadiabatic coupling. We argue that the soft nature of the inorganic lattice with small bulk modulus is key for defect tolerance, and hence, the findings are general to other MHPs.

Science & Technology - Other Topics↗
DOE OSTI2023

A composite electrodynamic mechanism to reconcile spatiotemporally resolved exciton transport in quantum dot superlattices

Quantum dot (QD) solids are promising optoelectronic materials; further advancing their device functionality requires understanding their energy transport mechanisms. The commonly invoked near-field Förster resonance energy transfer (FRET) theory often underestimates the exciton hopping rate in QD solids, yet no consensus exists on the underlying cause. In response, we use time-resolved ultrafast stimulated emission depletion (STED) microscopy, an ultrafast transformation of STED to spatiotemporally resolve exciton diffusion in tellurium-doped cadmium selenide–core/cadmium sulfide–shell QD superlattices. We measure the concomitant time-resolved exciton energy decay due to excitons sampling a heterogeneous energetic landscape within the superlattice. The heterogeneity is quantified by single-particle emission spectroscopy. This powerful multimodal set of observables provides sufficient constraints on a kinetic Monte Carlo simulation of exciton transport to elucidate a composite transport mechanism that includes both near-field FRET and previously neglected far-field emission/reabsorption contributions. Uncovering this mechanism offers a much-needed unified framework in which to characterize transport in QD solids and additional principles for device design.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Atom-by-atom imaging of moiré transformations in 2D transition metal dichalcogenides

Understanding the atomic-scale mechanisms that govern the structure of interfaces is critical across materials systems but particularly so for two-dimensional (2D) moiré materials. Here, we image, atom-by-atom, the thermally induced structural evolution of twisted bilayer transition metal dichalcogenides using in situ transmission electron microscopy. We observe low-temperature, local conversion of moiré superlattice into nanoscale aligned domains. Unexpectedly, this process occurs by nucleating a new grain within one monolayer, whose crystal orientation is templated by the other. The aligned domains grow through collective rotation of moiré supercells and hopping of 5|7 defect pairs at moiré boundaries. This provides mechanistic insight into the atomic-scale interactions controlling moiré structures and illustrates the potential to pattern interfacial structure and properties of 2D materials at the nanoscale.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗