Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HOMOGENIZATION METHODS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Evaluation of a Geotechnical Compaction Model to Estimate Sediment Deformation

When surface ruts from vehicle activity occur above archeological deposits, there is a potential for an impact to the archeological record to occur. While impacts to the soil surface are relatively straightforward to describe, sub-surface disturbances are more difficult to quantify. In particular, disturbances to buried archeological materials can be difficult to characterize. Materials can be damaged by surface disturbances, but they can also be impacted even if they stay intact. Interpretation of intact materials relocated within the sediment column can be problematic. Traditional characterization methods (e.g. excavation) can also disturb archaeological materials. Here, we present a geotechnical compaction model that can be used to assist with sub-surface characterization under vehicle ruts formed during off-road travel. The model is based on a Boussinesq analysis of stress increase below a surface load. The change in bulk density resulting from compaction is assumed to be proportional to the stress increase. The model results were compared against pilot scale tests conducted with homogeneous sediment and field scale in-situ tests. The results indicate that the model generally agreed with measurements to within 20%, although only a single soil type was evaluated in these studies, with a narrow range of initial bulk densities and rut depths. While application of the model across a broader matrix of soil types, bulk densities and rut depths would increase confidence in the model, it appears that the model may be suitable for use in archeological field investigations. Potential uses include both compliance and research based field applications.

Fritz, Brad G.↗
DOE OSTI2026

Polymer coatings on zirconia microspheres via rotating flow fluid dynamics

Conventional tristructural isotropic (TRISO) coatings for nuclear fuels require multi-step and expensive formation processes; any breakage of the coatings may lead to fission species release. Polymer derived ceramic (PDC) coatings can be a suitable alternative to address these issues. In this study, allylhydridopolycarbosilane (SMP-10) coatings were created on yttria stabilized zirconia (YSZ) microspheres using a Rotating Flow Fluid Dynamics (RFFD) coating method. The effects of curing temperature, rotation speed, and coating cycle/time on the coating were analyzed. Surface functionalization of YSZ microspheres with NaOH resulted in good adhesion between the polymer precursor and the YSZ kernel particles. Spectroscopy analysis revealed complete curing of SMP-10 coated YSZ at 160 °C. Rotation speed and coating time significantly affect the coating characteristics. After 3 cycles at lower rotation speed (50 rpm) for 10 min each, the coating obtained was uniform and homogeneous. In comparison, the coating showed almost 10 times less eccentricity at a high rotation speed of 300 rpm. Compared with the coatings prepared at 300 rpm condition, the coatings have higher sphericity and lower eccentricity at 50 rpm. Overall, this study provides a novel and effective route for fabricating and curing SMP-10 precursor coatings on YSZ microspheres.

Ravi, Nivetha [University of Alabama, Birmingham]↗
DOE OSTI2024

Methods of sheet metal production and sheet metal products produced thereby

Processes for producing sheet metal products by machining a solid metal body with a cutting tool in a single step to continuously produce a continuous bulk form from material obtained from the solid metal body, and without performing a hot rolling operation thereon, cold rolling the continuous bulk form to produce a sheet metal product. The machining step is a large-strain machining process capable of being directly performed on an as-cast ingot or other solid body to produce a continuous intermediate product that can be directly cold rolled without any intervening hot rolling operation, and optionally without homogenization or annealing.

Trumble, Kevin Paul↗
DOE OSTI2021

A heterogeneous iridium single-atom-site catalyst for highly regioselective carbenoid O–H bond insertion

Transition-metal-catalysed carbenoid insertion of hydroxyl groups represents a robust and versatile method to forge C–O bonds. Achieving site-selective functionalization of alcohols using this transformation has undoubted synthetic value but remains challenging. Here we report a strategy for selective carbenoid O–H insertion that exploits an engineered heterogeneous iridium single-atom catalyst, thus providing opportunities for organic transformations by merging material science and catalysis. This catalytic protocol delivers excellent selectivities (up to 99:1) for the functionalization of aliphatic over phenolic O–H bonds, whereas the analogous homogeneous catalyst, Ir(ttp)COCl (ttp = 5,10,15,20-tetra-p-tolylporphyrinato), provided modest preferences. Density-functional-theory calculations suggest that the site-selectivity derives from the lower oxidation state of the iridium metal centre in the heterogeneous catalyst and its impact on the absorption energies of the reactants. These results showcase an example of a heterogeneous single-atom catalyst providing superior site-selectivity and provide a complementary strategy to address challenges in catalysis for organic synthesis. [Figure not available: see fulltext.]

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Effect of surface acidity modulation on Pt/Al 2 O 3 single atom catalyst for carbon monoxide oxidation and methanol decomposition

With ideal metal utilization efficiency and homogeneous active sites, single atom catalysts (SACs) have attracted extensive attention in heterogeneous catalysis field. The performance of SACs is highly dependent on the local coordination environment of metal single atoms. However, few works reported the effect of surface acidity modification on the performance of SACs such as Pt SACs which have been widely studied nowadays. In this work, a Pt/Al 2 O 3 SAC has been successfully prepared using a bayerite Al(OH) 3 as support through simple IWI method for Pt loading. Through post-modification of Pt/Al 2 O 3 with acidic WO 3 and basic MgO, the surface acidity of Pt/Al 2 O 3 was tuned. Here, activity of CO oxidation and methanol decomposition on the modified catalysts has been evaluated. It was found that the catalytic performance was highly related to the surface acidity of Pt SACs. Basic MgO modified Pt/Al 2 O 3 performed better in CO oxidation under the reaction condition with H 2 O. Acidic WO 3 modified Pt/Al 2 O 3 showed superior activity in methanol decomposition. Detailed characterization and in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) study suggested that the positive H 2 O effect on CO oxidation was due to the mitigated formation of bicarbonate species on Pt/Al 2 O 3 and WO 3 /Pt/Al 2 O 3 catalysts and the promoted desorption of carbonate species from MgO/Pt/Al 2 O 3 . The superior methanol decomposition performance on WO 3 /Pt/Al 2 O 3 was owing to its abundant oxygen vacancies and high resistance to carbonate accumulation. This study highlights the importance of surface acidity modulation of Pt SACs in heterogeneous catalysis and suggests that fine-tuning the surface acidity can be an effective strategy in new SACs development.

36 MATERIALS SCIENCE↗
DOE OSTI2022

The role of breakup and coalescence in fine-scale bubble-induced turbulence. I. Dynamics

We study the effect of bubble breakup and coalescence on fine-scale dynamics of bubbly turbulent flows using direct numerical simulations. We perform two different simulations of dilute bubbly flows of void fraction 0.5%: one with bubbles breaking up and coalescing and the other without these physical processes. The volume of the fluid method is used for simulating bubbles undergoing breakup and coalescence while the bubbles are treated as rigid spheres in the immersed boundary method simulation. The energy spectrum in both types of simulation, consistent with previous studies, exhibits a -3 slope. We follow a single infinitesimal fluid element as it evolves to understand velocity gradient dynamics using conditional mean trajectories. We note finite-time divergence when the fluid element evolves under the action of inertial and pressure dynamics. The inertial, pressure, and viscous velocity gradient dynamics, when considered individually, produce the same results for bubble-induced turbulence (BIT) as with the classical homogeneous isotropic turbulence (HIT). Yet when the overall velocity gradient dynamics is considered, BIT results in non-cyclic trajectories moving toward stable node and unstable saddle while classical HIT shows cyclic behavior in their trajectories that move toward the origin. Interestingly, both the volume of fluid and immersed boundary simulations produce similar results. Therefore, there are two main takeaways from this research. First, new velocity gradient models are needed for BIT as their velocity gradients behavior is entirely different from the HIT. Second, we can neglect the bubble topology, breakup, and coalescence while studying or modeling the fine-scale dynamics of BIT.

42 ENGINEERING↗
DOE OSTI2020

Coupling buried etalon layers to an engraved metasurface for durable and large-aperture meta-optics

Many optical applications that could potentially benefit from the design flexibility provided by the metasurface approach are being prohibited by the limited scalability of the fabrication and the robustness of the end-result structures when using a resonant meta-elements-based approach. In this study, an alternative demonstrated approach with superior scalability and robustness is substrate-engraved metasurfaces, based on medium mixing homogenization, yet it suffers from very limited optical response. Here we propose advancing this approach by coupling the metasurface with buried etalon layers, leading to enhancement in the optical response. A transfer matrix analysis is used to study the parameter space, predicting that the patterned reflectance values range of a beam shaper could be raised from only 4% to 30% when the metasurface is engraved in silica, and even up to 66% when engraved into higher-index oxides. Using the method proposed here, the phase difference range across the metasurface could be increased by 0.4 radians beyond the range achievable by a metasurface engraved in silica and could reach even higher values when embedded in higher-index materials. Full-wave numerical simulations are used to demonstrate a cylindrical metareflector and a metalens, further validating the analysis.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Trace Element Analyses of Micron-Size Particles and Statistical Determination of Minimum Detection Limits

Savannah River National Laboratory (SRNL) has developed expertise in producing homogeneous, ca. 1 m-diameter spherical particles of mixed-element components, wherein dopants can be varied from a trace constituent (ppm) to wt.% concentrations. The samples used for this work are nickel-doped cerium oxide microspheres produced by SRNL. They were initially selected as analogs for plutonium-doped uranium oxide particles and analyzed as part of a larger study to evaluate whether electron probe microanalyzers (EPMA) can be used to characterize nuclear materials as an alternative or complementary method to mass spectrometers. The five samples used in this study contained nominal compositions of 0, 0.004, 0.04, 0.4 and 4 wt.% Ni. They were analyzed by both an Agilent 7900 Q-ICP-MS at SRNL and the JEOL JXA8530F Plus EPMA at the University of Minnesota. In addition to EPMA results (calibrated with high-precision Q-ICP-MS analyses) suggesting that the EPMA could address outstanding nuclear material characterization needs, these samples 1) showcase the ability of the EPMA to quantify not just trace concentrations, but trace concentrations in microparticles (1 m diameter, Fig. 1), and 2) offer a unique opportunity to evaluate the methodology for assessing the minimum detection limits of EPMA analyses.

McSwiggen, Peter [JEOL USA, 11 Dearborn Road, Peab↗
DOE OSTI2024

Multi deep learning-based stochastic microstructure reconstruction and high-fidelity micromechanics simulation of time-dependent ceramic matrix composite response

A multi deep learning-based framework is developed for efficient, automated microstructure reconstruction and generation of stochastic representative volume elements (SRVEs) with periodic boundary conditions (PBCs) for accurate modeling of ceramic matrix composite (CMC) response. The methodology comprises a convolutional neural network coupled with regression layers to act as a vanilla regression network for semantic segmentation of the microstructure, allowing accurate characterization of the phases and their distributions at the microscale. Scanning electron microscope and confocal microscope are used to obtain C/SiNC and SiC/SiNC CMCs micrographs for vanilla regression testing. Microstructure variability in terms of fiber volume fraction and porosity are quantified through the output regression layer, ensuring accurate representation of material variability in SRVE construction. Generative adversarial network (GAN) and its variants are designed to produce high-fidelity SRVE, spanning CMCs microstructure variability space. A circular padding algorithm is developed to generate SRVEs with PBCs during training of GANs. The accuracy of the generated SRVEs is established through micromechanics simulations, where an efficient formulation of the high-fidelity generalized methods of cells (HFGMC) approach is used to compute the effective mechanical properties. Furthermore, an iterative algorithm is implemented in the HFGMC solver to simulate time-dependent deformation of SiC/SiNC subjected to creep loading conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Elucidating the Onset of Plasticity in Sliding Contacts Using Differential Computational Orientation Tomography

Abstract Depending on the mechanical and thermal energy introduced to a dry sliding interface, the near-surface regions of the mated bodies may undergo plastic deformation. In this work, we use large-scale molecular dynamics simulations to generate “differential computational orientation tomographs” (dCOT) and thus highlight changes to the microstructure near tribological FCC alloy surfaces, allowing us to detect subtle differences in lattice orientation and small distances in grain boundary migration. The analysis approach compares computationally generated orientation tomographs with their undeformed counterparts via a simple image analysis filter. We use our visualization method to discuss the acting microstructural mechanisms in a load- and time-resolved fashion, focusing on sliding conditions that lead to twinning, partial lattice rotation, and grain boundary-dominated processes. Extracting and laterally averaging the color saturation value of the generated tomographs allows us to produce quantitative time- and depth-resolved maps that give a good overview of the progress and severity of near-surface deformation. Corresponding maps of the lateral standard deviation in the color saturation show evidence of homogenization processes occurring in the tribologically loaded microstructure, frequently leading to the formation of a well-defined separation between deformed and undeformed regions. When integrated into a computational materials engineering framework, our approach could help optimize material design for tribological and other deformation problems. Graphic Abstract .

36 MATERIALS SCIENCE↗
DOE OSTI2025

Water reactive polyurethane grouting for deep vadose zone contaminant immobilization

Contaminants in the deep vadose zone (DVZ) pose a long-term threat to groundwater, human health, and the environment. Polyurethane grouting is a type of chemical grouting that is potentially advantageous in immobilizing contaminants in DVZs. Polyurethane resin has low viscosity that makes it feasible to penetrate and fill the pore space between fine particles. Here, in this study a series of laboratory pressure grouting and leaching tests were conducted to simulate and assess the effectiveness of polyurethane grouting for immobilizing contaminants in DVZs. Soil with fine particles was prepared with 127 I (as iodide) that served as a non-radioactive surrogate for radioactive 129 I. After grouting and curing, leaching tests were used to measure and compare contaminant diffusivity and leachability index values. Additionally, changes in porosity and saturated hydraulic conductivity of grouted soil were measured. X-Ray Computer Tomography (XCT) results showed that the cured polyurethane was distributed nearly homogeneously and approximately half of the voids were filled with cured polyurethane. Grouting reduced the saturated hydraulic conductivity of soil by 37 %. The effective diffusivity decreased by more than 80 % as compared with the ungrouted soil. The leachability index of the grouted soil was 6.5; meeting the criteria established by the U.S. Nuclear Regulatory Commission (NRC) standard. The results obtained in this study provide a valuable assessment of polyurethane grouting for iodide immobilization in the DVZ and indicate this approach may be a viable method for contaminant remediation in DVZ soils.

Contaminant Diffusion↗
DOE OSTI2024

Exploring constituent redistribution in irradiated U-19Pu-14Zr fuel via electron probe microanalysis

Here, the phenomena of constituent redistribution, wherein a previously homogeneous metallic fuel forms discrete, radially concentric compositional zones upon irradiation was investigated by examining an irradiated U-19Pu-14Zr fuel (where numbers represent wt. %) with a burnup of 11.5 at.% with electron probe microanalysis (EPMA) and quadruple inductively coupled plasma mass spectroscopy (Q-ICP-MS). EPMA-generated U, Pu, and Zr compositional data obtained from a diameter traverse of the sample was converted to mass and was used to: 1) compare the overall fuel element analysis results between the two methods, 2) determine the number of compositionally distinct zones forming as a result of constituent redistribution; and 3) quantify the post-irradiation loss or gain of U, Pu, and Zr atoms in each distinct compositional zone. Weight percent concentrations of U, Pu, and Zr for the overall cross section compare favorably between the two analytical methods, suggesting that the spatially resolved EPMA analysis complements bulk chemical analysis. Among the four identified compositional zones, post-irradiation quantification of U, Pu, and Zr elemental atom content changes shows that the quantity of U atoms lost from the innermost zone is slightly less than the quantity of U atoms gained by the middle two zones, and the quantity of Zr atoms lost from the high-U third zone is slightly less than is gained by the two innermost zones. Pu is lost from all four zones, although the innermost zone and the high-U third zone lose a significantly higher percentage (> 22 %) of their initial Pu atoms than the other two zones. For all three elements, EPMA cannot distinguish between atoms lost due to transport to a different zone from atoms lost due to nuclear processes; however, the insight gained from using this process can be used to experiment with new modeling techniques to predict constituent redistribution in U-Pu-Zr fuels.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Quantum simulations of hydrodynamics via the Madelung transformation

Developing numerical methods to simulate efficiently nonlinear fluid dynamics on universal quantum computers is a challenging problem. In this paper, a generalization of the Madelung transform is defined to solve quantum relativistic charged fluid equations interacting with external electromagnetic forces via the Dirac equation. The Dirac equation is discretized into discrete-time quantum walks which can be efficiently implemented on universal quantum computers. A variant of this algorithm is proposed to implement simulations using current noisy intermediate scale quantum (NISQ) devices in the case of homogeneous external forces. High resolution (up to N=2 17 grid points) numerical simulations of relativistic and nonrelativistic hydrodynamical shocks on current IBM NISQs are performed with this algorithm. Here, this paper demonstrates that fluid dynamics can be simulated on NISQs, and opens the door to simulating other fluids, including plasmas, with more general quantum walks and quantum automata.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Ferroelectric HfO 2 and the importance of strain

Ferroelectric oxides based on HfO 2 show tremendous promise for the next generation of memory and logic devices. The ferroelectric polymorph is one of several that can be derived from the high symmetry cubic fluorite structure of HfO 2 . A single grain of HfO 2 may consist of a coherent mixture of multiple orientational and translational variants of different polymorphs. Here, we use symmetry-adapted strain-order parameters to elucidate the relationship between the different HfO 2 polymorphs and their symmetrically equivalent variants. We use first-principles electronic structure methods to identify minimum energy pathways and map them in subspaces of the symmetry-adapted strain order parameters. We next investigate the atomic structure of domain boundaries that separate coexisting variants of ferroelectric HfO 2 . Further, we rely on Gibbsian excess quantities and a precise specification of mechanical boundary conditions to describe the thermodynamic properties of domain boundaries. Our first-principles calculations show that the O and Hf shuffle arrangement within a domain boundary is closely related to the intermediate shuffle patterns of the homogeneous pathways between ferroelectric variants. Furthermore, the preferred structure within a boundary is very sensitive to local strain constraints imposed by the adjacent ferroelectric variants, leading to highly anisotropic domain boundary energies.

36 MATERIALS SCIENCE↗
DOE OSTI2023

11-th order of accuracy for numerical solution of 3-D Poisson equation with irregular interfaces on unfitted Cartesian meshes

For the first time the optimal local truncation error method (OLTEM) with 125-point stencils and unfitted Cartesian meshes has been developed in the general 3-D case for the Poisson equation for heterogeneous materials with smooth irregular interfaces. The 125-point stencils equations that are similar to those for quadratic finite elements are used for OLTEM. The interface conditions for OLTEM are imposed as constraints at a small number of interface points and do not require the introduction of additional unknowns, i.e., the sparse structure of global discrete equations of OLTEM is the same for homogeneous and heterogeneous materials. The stencils coefficients of OLTEM are calculated by the minimization of the local truncation error of the stencil equations. These derivations include the use of the Poisson equation for the relationship between the different spatial derivatives. Such a procedure provides the maximum possible accuracy of the discrete equations of OLTEM. In contrast to known numerical techniques with quadratic elements and third order of accuracy on conforming and unfitted meshes, OLTEM with the 125-point stencils provides 11-th order of accuracy, i.e., an extremely large increase in accuracy by 8 orders for similar stencils. The numerical results show that OLTEM yields much more accurate results than high-order finite elements with much wider stencils. The increased numerical accuracy of OLTEM leads to an extremely large increase in computational efficiency. Additionally, a new post-processing procedure with the 125-point stencil has been developed for the calculation of the spatial derivatives of the primary function. The post-processing procedure includes the minimization of the local truncation error and the use of the Poisson equation. It is demonstrated that the use of the partial differential equation (PDE) for the 125-point stencils improves the accuracy of the spatial derivatives by 6 orders compared to post-processing without the use of PDE as in existing numerical techniques. At an accuracy of 0.1% for the spatial derivatives, OLTEM reduces the number of degrees of freedom by 900 - 4∙10 6 times compared to quadratic finite elements. The developed post-processing procedure can be easily extended to unstructured meshes and can be independently used with existing post-processing techniques (e.g., with finite elements).

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Theoretical Modeling of Electrochemical Proton-Coupled Electron Transfer

Proton-coupled electron transfer (PCET) plays an essential role in a wide range of electrocatalytic processes. Here, a vast array of theoretical and computational methods have been developed to study electrochemical PCET. These methods can be used to calculate redox potentials and pKa values for molecular electrocatalysts, proton-coupled redox potentials and bond dissociation free energies for PCET at metal and semiconductor interfaces, and reorganization energies associated with electrochemical PCET. Periodic density functional theory can also be used to compute PCET activation energies and perform molecular dynamics simulations of electrochemical interfaces. Various approaches for maintaining a constant electrode potential in electronic structure calculations and modeling complex interactions in the electric double layer (EDL) have been developed. Theoretical formulations for both homogeneous and heterogeneous electrochemical PCET spanning the adiabatic, nonadiabatic, and solvent-controlled regimes have been developed and provide analytical expressions for the rate constants and current densities as functions of applied potential. The quantum mechanical treatment of the proton and inclusion of excited vibronic states have been shown to be critical for describing experimental data, such as Tafel slopes and potential dependent kinetic isotope effects. The calculated rate constants can be used as input to microkinetic models and voltammogram simulations to elucidate complex electrocatalytic processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

“Seeing Is Believing”—In-Depth Analysis by Co-Imaging of Periodically-Poled X-Cut Lithium Niobate Thin Films

Nonlinear and quantum optical devices based on periodically-poled thin film lithium niobate (PP-TFLN) have gained considerable interest lately, due to their significantly improved performance as compared to their bulk counterparts. Nevertheless, performance parameters such as conversion efficiency, minimum pump power, and spectral bandwidth strongly depend on the quality of the domain structure in these PP-TFLN samples, e.g., their homogeneity and duty cycle, as well as on the overlap and penetration depth of domains with the waveguide mode. Hence, in order to propose improved fabrication protocols, a profound quality control of domain structures is needed that allows quantifying and thoroughly analyzing these parameters. In this paper, we propose to combine a set of nanometer-to-micrometer-scale imaging techniques, i.e., piezoresponse force microscopy (PFM), second-harmonic generation (SHG), and Raman spectroscopy (RS), to access the relevant and crucial sample properties through cross-correlating these methods. Based on our findings, we designate SHG to be the best-suited standard imaging technique for this purpose, in particular when investigating the domain poling process in x-cut TFLNs. While PFM is excellently recommended for near-surface high-resolution imaging, RS provides thorough insights into stress and/or defect distributions, as associated with these domain structures. In this context, our work here indicates unexpectedly large signs for internal fields occurring in x-cut PP-TFLNs that are substantially larger as compared to previous observations in bulk LN.

Reitzig, Sven (ORCID:0000000286970379)↗
DOE OSTI2025

Cathode Upcycling for Direct Recycling of Lithium‐Ion Batteries Using a Precipitation Approach

With the increased production of electric vehicles to reduce carbon emissions, the lithium-ion battery market to supply those vehicles has grown dramatically. To enhance battery sustainability and circularity, direct recycling methods aim to recover intact cathode materials. However, end-of-life cathode materials are typically 15–20 years old and often have lower energy density compared to current cathode materials. To address this challenge, a rapid precipitation process is developed to boost energy density by converting low Ni-compositions, LiNi 0.33 Co 0.33 Mn 0.33 O 2 (NMC111), into higher Ni-compositions (NMC622). This process forms a Ni-rich coating on cathode particles that diffuses into the core upon high-temperature relithiation, increasing compositional homogeneity. The upcycling process leverages existing infrastructure, offering low capital cost and minimal additional chemical input. Through ex situ tomographic transmission X-ray microscopy (TXM), 3D Ni:Co elemental mixing is quantified, confirming that elemental content evens at the secondary particle level with a mean NMC622 composition upon relithiation. However, elemental gradients remain in the single crystalline primary particles. Ex situ high-resolution and in situ wide-angle X-ray diffraction reveals concurrent structural changes during the relithiation process. These findings provide key insights into the structural and chemical mechanisms of elemental diffusion to obtain further improvements of increased capacity and retention through compositional conversion of cathode materials.

Cathode Upcycling↗