SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A solidified pendant drop technique is presently used in the measurement of surface tension of a 62 mol pct ZrF4, 33 mol pct BaF2, 5 mol pct LaF3 heavy metal-fluoride glass, in keeping with a requirement from a comparison experiment planned for microgravity conditions aboard the Space Shuttle. The surface tension at 550 C is 0.174 + or - 0.005 J/sq m.
The objectives of this investigation were to determine the characteristics of semiconductor devices at low temperatures. The output characteristics of several currently available semiconductor devices and devices fabricated at Marshall Space Flight Center were measured over a range of gate voltages. Large variations in low-temperature performance, not only from type to type, but from field effect transistor (FET) to FET of the same type were obtained. By increasing the carrier concentrations at low temperatures through extra heavy doping, metal oxide semiconductor field effect transistor (MOSFET) device was fabricated that operated at 4.2K. To verify the low-temperature operation of a heavily doped device, this procedure was repeated. Their noise spectrum was analyzed at 4.2K. Suggestions were made as to possible fabrication methods, techniques, and other semiconductor materials that might improve the device charactersitics at low temperatures. A procedure for using an electric field to drift dopants through the insulating oxide to produce a very thin, heavily doped region under the gate of a MOSFET was initiated. Capacitance s a function of voltage plots was suggested as a method for determining the level of dopant drift.
This paper summarizes neutron dosimetry measurements made by the USF Physics Research Laboratory aboard US and Russian LEO spacecraft over the past 20 years using two types of passive detector. Thermal/resonance neutron detectors exploiting the 6Li(n,T) alpha reaction were used to measure neutrons of energies <1 MeV. Fission foil neutron detectors were used to measure neutrons of energies above 1 MeV. While originally analysed in terms of dose equivalent using the NCRP-38 definition of quality factor, for the purposes of this paper the measured neutron data have been reanalyzed and are presented in terms of ambient dose equivalent. Dose equivalent rate for neutrons <1 MeV ranged from 0.80 microSv/d on the low altitude, low inclination STS-41B mission to 22.0 microSv/d measured in the Shuttle's cargo bay on the highly inclined STS-51F Spacelab-2 mission. In one particular instance a detector embedded within a large hydrogenous mass on STS-61 (in the ECT experiment) measured 34.6 microSv/d. Dose equivalent rate measurements of neutrons >1 MeV ranged from 4.5 microSv/d on the low altitude STS-3 mission to 172 microSv/d on the ~6 year LDEF mission. Thermal neutrons (<0.3 eV) were observed to make a negligible contribution to neutron dose equivalent in all cases. The major fraction of neutron dose equivalent was found to be from neutrons >1 MeV and, on LDEF, neutrons >1 MeV are responsible for over 98% of the total neutron dose equivalent. Estimates of the neutron contribution to the total dose equivalent are somewhat lower than model estimates, ranging from 5.7% at a location under low shielding on LDEF to 18.4% on the highly inclined (82.3 degrees) Biocosmos-2044 mission. c2001 Elsevier Science Ltd. All rights reserved.
We present an overview of the Long Duration Exposure Facility (LDEF) induced activation measurements. The LDEF, which was gravity-gradient stabilized, was exposed to the low Earth orbit (LEO) radiation environment over a 5.8 year period. Retrieved activation samples and structural components from the spacecraft were analyzed with low and ultra-low background HPGe gamma spectrometry at several national facilities. This allowed a very sensitive measurement of long-lived radionuclides produced by proton- and neutron-induced reactions in the time-dependent, non-isotropic LEO environment. A summary of major findings from this study is given that consists of directionally dependent activation, depth profiles, thermal neutron activation, and surface beryllium-7 deposition from the upper atmosphere. We also describe a database of these measurements that has been prepared for use in testing radiation environmental models and spacecraft design.
Human exploration off planet is severely limited by the cost of launching materials into space and by re-supply. Thus materials brought from Earth must be light, stable and reliable at destination. Using traditional approaches, a lunar or Mars base would require either transporting a hefty store of metals or heavy manufacturing equipment and construction materials for in situ extraction; both would severely limit any other mission objectives. Long-term human space presence requires periodic replenishment, adding a massive cost overhead. Even robotic missions often sacrifice science goals for heavy radiation and thermal protection. Biology has the potential to solve these problems because life can replicate and repair itself, and perform a wide variety of chemical reactions including making food, fuel and materials. Synthetic biology enhances and expands life's evolved repertoire. Using organisms as feedstock, additive manufacturing through bioprinting will make possible the dream of producing bespoke tools, food, smart fabrics and even replacement organs on demand. This new approach and the resulting novel products will enable human exploration and settlement on Mars, while providing new manufacturing approaches for life on Earth.
Human exploration off planet is severely limited by the cost of launching materials into space and re-supply. Thus materials brought from earth must be light, stable and reliable at destination. Using traditional approaches a lunar or Mars base would require either transporting a hefty store of metals or heavy manufacturing equipment and construction materials for in situ extraction; both would severely limit any other mission objectives. Long-term human space presence requires periodic replenishment, adding a massive cost overhead. Even robotic missions often sacrifice science goals for heavy radiation and thermal protection. Biology has the potential to solve these problems because it can replicate and repair itself, and do a wide variety of chemical reactions including making food, fuel and materials. Synthetic biology can greatly enhance and expand life's evolved repertoire. Using natural and synthetically altered organisms as the feedstock for additive manufacturing could one day make possible the dream of producing bespoke tools, food, smart fabrics and even replacement organs on demand. To this end our lab has produced a proof-of-concept bioprinter with nearly one-cell resolution. Genetically engineering yeast cells to secrete bioproducts subsequent to printing allows the potential to make biomaterials with a fine microstructure. Imagine a production system that, at a few micron scale resolution, can add mollusk shell for compressive strength per unit mass, spider silk or collagen for tensile strength per unit mass, and potentially biologically-deposited wires. Now imagine what new products can be enabled by such a technology, on earth or beyond.
Explore the source record for details and available documents.
Lanthanides (Ln) are a new group of life metals, and many questions remain regarding how they are acquired and used in biology. Methylotrophic bacteria can acquire, transport, biomineralize, and use Ln as part of a cofactor complex with pyrroloquinoline quinone (PQQ) in alcohol dehydrogenases. For most methylotrophic bacteria use is restricted to the light Ln, which range from lanthanum to samarium (atomic numbers 57–62). Understanding how the cell differentiates between light and heavy Ln, and the impacts of these metals on the metabolic network, will advance the field of Ln biochemistry and give insights into enzyme catalysis, stress homeostasis, and metal biomineralization and compartmentalization. We report robust methanol growth with the heavy Ln gadolinium by a genetic variant of the model methylotrophic bacterium Methylorubrum extorquens AM1, named evo -HLn, for “ evo lved for H eavy L antha n ides.” A non-synonymous single nucleotide polymorphism in a cytosolic hybrid histidine kinase/response regulator allowed for sweeping transcriptional alterations to heavy metal stress response, methanol oxidation, and central metabolism. Increased expression of genes for Ln acquisition and uptake, production of the Ln-chelating lanthanophore, PQQ biosynthesis, and phosphate transport and metabolism resulted in gadolinium hyperaccumulation of 36-fold with a trade-off for light Ln accumulation. Gadolinium was hyperaccumulated in an enlarged acidocalcisome-like compartment. This is the first evidence of a bacterial intracellular Ln-containing compartment that we name the “lanthasome.” Carotenoid and toblerol biosynthesis were also upregulated. Due to its unique capabilities, evo -HLn can be used to further magnetic resonance imaging (MRI) and bioremediation technologies. In this regard, we show that gadolinium hyperaccumulation was sufficient to produce MRI contrast in whole cells, and that evo -HLn was able to readily acquire the metal from the MRI contrast agent gadopentetic acid. Finally, hyperaccumulation of gadolinium, differential uptake of light and heavy Ln, increased PQQ levels, and phosphate transport provide new insights into strategies for Ln recovery.
In this work, we introduce an effective theory for quantum critical points (QCPs) in heavy-fermion systems, involving a change in carrier density without symmetry breaking. Our theory captures a strongly coupled metallic QCP, leading to robust marginal Fermi-liquid transport phenomenology, and associated linear in temperature (T) "strange metal" resistivity, all within a controlled large-N limit. In the parameter regime of strong damping of emergent bosonic excitations, the QCP also displays a near-universal "Planckian" transport lifetime τ tr ~ℏ/(k B T). This is contrasted with the conventional so-called "slave boson" theory of the Kondo breakdown, where the large-N limit describes a weak coupling fixed point and nontrivial transport behavior may only be obtained through uncontrolled 1/N corrections. We also compute the weak-field Hall coefficient within the effective model as the system is tuned across the transition. We then find that, between the two plateaus reflecting the different carrier densities in the two Fermi-liquid phases, the Hall coefficient can develop a peak in the critical crossover regime, like in recent experimental findings, in the parameter regime of weak boson damping.
This disclosure provides polyamine sorbent compositions for the separation of metals from aqueous solutions. The polyamine sorbent compositions comprise a silica support, an aminosilane bound to the silica support, an epoxysilane bound to the silica support, and a polyamine where the polyamine is chemically tethered onto a solid silica support through via the epoxysilane. The polyamine may be further stabilized within the bulk sorbent through hydrogen bonding interactions with the aminosilane. The sorbent compositions resist leaching by H 2 O in an aqueous stream containing heavy oxyanion-based (and other) metals and demonstrate stability over a pH range of 2-14. The sorbent compositions are useful for the separation of metals from aqueous solutions. The cationic heavy metals are captured by the co-existing amine groups (—NH 2 , —NH, —N) from the polymeric network while additional metal capture capacity is derived from the introduction of a secondary silane linker.
As hosts of living high-mass stars, Wolf-Rayet (WR) regions or WR galaxies are ideal objects for constraining the high-mass end of the stellar initial mass function (IMF). We construct a large sample of 910 WR galaxies/regions that cover a wide range of stellar metallicity (from Z ~ 0.001 to 0.03) by combining three catalogs of WR galaxies/regions previously selected from the SDSS and SDSS-IV/MaNGA surveys. We measure the equivalent widths of the WR blue bump at ~4650 Å for each spectrum. They are compared with predictions from stellar evolutionary models Starburst99 and BPASS, with different IMF assumptions (high-mass slope α of the IMF ranging from 1.0 to 3.3). Both singular evolution and binary evolution are considered. We also use a Bayesian inference code to perform full spectral fitting to WR spectra with stellar population spectra from BPASS as fitting templates. We then make a model selection among different α assumptions based on Bayesian evidence. These analyses have consistently led to a positive correlation of the IMF high-mass slope α with stellar metallicity Z, i.e., with a steeper IMF (more bottom-heavy) at higher metallicities. Specifically, an IMF with α = 1.00 is preferred at the lowest metallicity (Z ~ 0.001), and an Salpeter or even steeper IMF is preferred at the highest metallicity (Z ~ 0.03). These conclusions hold even when binary population models are adopted.
Abstract We analyze recent measurements of C / T , specific heat C divided by temperature T , of a recently observed ultra spin liquid. The measurements are carried out in magnetic fields on the triangular lattice compound . We show that the obtained heat capacity formed by the ultra spin liquid as a function of temperature T vs. magnetic field B behaves very similar to the electronic specific heat of the HF metal and the quantum magnet . We demonstrate that the effective mass of spinon exhibits the universal scaling coinciding with scaling observed in heavy-fermion (HF) metals and in . Based on these observations we conclude that a strongly correlated spin liquid determines the thermodynamic properties of the ultra spin liquid of .
Shot noise measures out-of-equilibrium current fluctuations and is a powerful tool to probe the nature of current-carrying excitations in quantum systems. Recent shot-noise measurements in the heavy-fermion strange metal YbRh 2 Si 2 exhibit a strong suppression of the Fano factor ( F )—the ratio of the current noise to the average current in the dc limit. This system is representative of metals in which electron correlations are extremely strong. Here we carry out the first theoretical study on the shot noise of diffusive metals in the regime of strong correlations. A Boltzmann-Langevin equation formulation is constructed in a quasiparticle description in the presence of strong correlations. We find that F = 3 / 4 in such a correlation regime. Thus, we establish the aforementioned Fano factor as universal to Fermi liquids, and we show that the Fano factor suppression observed in experiments on YbRh 2 Si 2 necessitates a loss of the quasiparticles. Our work opens the door to systematic theoretical studies of shot noise as a means of characterizing strongly correlated metallic phases and materials. Published by the American Physical Society 2024
Explore the source record for details and available documents.
Explore the source record for details and available documents.
It has long been recognized that solar wind bombardment onto exposed surfaces in the solar system will produce an energetic component to the exospheres about those bodies. Laboratory experiments have shown that there is no increase in the sputtering yield caused by highly charged heavy ions for metallic and for semiconducting surfaces, but the sputter yield can be noticeably increased in the case of a good insulating surface. Recently measurements of the solar wind composition have become available. It is now known that the solar wind composition is highly dependent on the origin of the particular plasma. Using the measured composition of the slow wind, fast wind, solar energetic particle (SEP) population, and coronal mass ejection (CME), broken down into its various components, we have estimated the total sputter yield for each type of solar wind. Whereas many previous calculations of sputtering were limited to the effects of proton bombardment. we show that the heavy ion component. especially the He++ component. can greatly enhance the total sputter yield during times when the heavy ion population is enhanced. We will discuss sputtering of both neutrals and ions.
Ammonium coordinated exchanger (ACE) sorbents recovery/remove anionic contaminant/critical metals from water. Heavy reliance of the U.S. on foreign critical mineral (CM) supplies presents national security and economics risks. This prompted government action. Domestically recovering CM from unconventional water sources, largely through adsorption processes, could alleviate this problem. Acid mine drainage and mineral leachates are viable sources