SEARCH · Engineering Papers

Results for “Grid Generation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

All sources NASA NTRS DOE OSTI

NASA NTRS1986

Three-dimensional grids as solutions of elliptic systems

An elliptic grid generation scheme is described which produces a curvilinear, boundary-fitted grid for highly swept wings with sharp leading edges. The three-dimensional integration domain is segmented in successive crossflow sections wherein the physical coordinates are transformed to computational coordinates by solving an elliptic set of two quasi-linear differential equations. Grid points are clustered in the vicinity of the wing surface, especially in the neighborhood of the leading edges. The formulation of the source terms in the equations governing the transformation contains adjustable parameters which are determined from limiting forms of the elliptic equations along the boundaries. The source terms are assigned to each grid point by interpolation of these parameters into the interior domain. The formulation does not depend on the boundary shape or on the distribution of the grid points along the boundaries. For the first time, the discretized governing equations have been solved using a fast AF1 iteration scheme.

Hartwich, P.-M.↗

NASA NTRS1989

Local grid refinement for transonic flow problems

The present use of locally refined Cartesian grids to solve transonic flow problems about three-dimensional aircraft configurations obviates surface-conforming grid generation through an embedding of surface-geometry paneling in the grid. Accurate resolution of flow close to the boundary, and in regions with strong velocity gradients, is achieved via hierarchical local refinement which subdivides a given grid cell into eight cells. Fast and reliable convergence is obtained by combining several preconditioners and damping strategies. Methods are suggested for preclusion of global convergence problems.

Melvin, Robin G.↗

NASA NTRS1995

A guide to the use of the pressure disk rotor model as implemented in INS3D-UP

This is a guide for the use of the pressure disk rotor model that has been placed in the incompressible Navier-Stokes code INS3D-UP. The pressure disk rotor model approximates a helicopter rotor or propeller in a time averaged manner and is intended to simulate the effect of a rotor in forward flight on the fuselage or the effect of a propeller on other aerodynamic components. The model uses a modified actuator disk that allows the pressure jump across the disk to vary with radius and azimuth. The cyclic and collective blade pitch angles needed to achieve a specified thrust coefficient and zero moment about the hub are predicted. The method has been validated with experimentally measured mean induced inflow velocities as well as surface pressures on a generic fuselage. Overset grids, sometimes referred to as Chimera grids, are used to simplify the grid generation process. The pressure disk model is applied to a cylindrical grid which is embedded in the grid or grids used for the rest of the configuration. This document will outline the development of the method, and present input and results for a sample case.

Chaffin, Mark S.↗

NASA NTRS1995

Numerical Study of Boundary Layer Interaction with Shocks: Method Improvement and Test Computation

The objective is the development of a high-order and high-resolution method for the direct numerical simulation of shock turbulent-boundary-layer interaction. Details concerning the spatial discretization of the convective terms can be found in Adams and Shariff (1995). The computer code based on this method as introduced in Adams (1994) was formulated in Cartesian coordinates and thus has been limited to simple rectangular domains. For more general two-dimensional geometries, as a compression corner, an extension to generalized coordinates is necessary. To keep the requirements or limitations for grid generation low, the extended formulation should allow for non-orthogonal grids. Still, for simplicity and cost efficiency, periodicity can be assumed in one cross-flow direction. For easy vectorization, the compact-ENO coupling algorithm as used in Adams (1994) treated whole planes normal to the derivative direction with the ENO scheme whenever at least one point of this plane satisfied the detection criterion. This is apparently too restrictive for more general geometries and more complex shock patterns. Here we introduce a localized compact-ENO coupling algorithm, which is efficient as long as the overall number of grid points treated by the ENO scheme is small compared to the total number of grid points. Validation and test computations with the final code are performed to assess the efficiency and suitability of the computer code for the problems of interest. We define a set of parameters where a direct numerical simulation of a turbulent boundary layer along a compression corner with reasonably fine resolution is affordable.

Adams, N. A.↗

NASA NTRS1995

Blocked Grid Technologies as Applied to Aerodynamic Configurations

The advantages and disadvantages of the blocked grid methodology are discussed using results from ENSAERO, CNS, and CNS-FV. The first two codes are based on finite differences and the last on cell-centered finite volume formulation. Techniques that enhance the utility of the blocked (or patched) grid methodology are described. These techniques include mesh discontinuous zonal interfaces, sliding zonal interfaces, fast search procedures, and virtual zones. All of these methods are designed with two goals; namely extend the use of patched grids to unsteady aerodynamics, e.g. oscillating control flaps, and provide the user more flexibility in the grid topologies available for gridding complex aerodynamic configurations. For example, the use of virtual zones allows the user the choice of using one grid topology for surface grids, and another for the volume grids. This additional flexibility has a large impact in the amount of calendar time required to block and grid a complex aerodynamic configuration. Several examples are shown demonstrating the new features. Other issues involving grid generation are also discussed. In particular the existing problems of defining grid quality measures which are relevant are also described.

Klopfer, Goetz↗

NASA NTRS2003

Toward Immersed Boundary Simulation of High Reynolds Number Flows

In the immersed boundary (IB) method, the surface of an object is reconstructed with forcing terms in the underlying flow field equations. The surface may split a computational cell removing the constraint of the near wall gridlines to be aligned with the surface. This feature greatly simplifies the grid generation process which is cumbersome and expensive in particular for structured grids and complex geometries. The IB method is ideally suited for Cartesian flow solvers. The flow equations written in Cartesian coordinates appear in a very simple form and several numerical algorithms can be used for an efficient solution of the equations. In addition, the accuracy of numerical algorithms is dependent on the underlying grid and it usually deteriorates when the grid deviates from a Cartesian mesh. The challenge for the IB method lies in the representation of the wall boundaries and in providing an adequate near wall flow field resolution. The issue of enforcing no-slip boundary conditions at the immersed surface has been addressed by several authors by imposing a local reconstruction of the solution. Initial work by Verzicco et al. was based on a simple linear, one-dimensional operator and this approach proved to be accurate for boundaries largely aligned with the grid lines. Majumdar et al. used various multidimensional and high order polynomial interpolations schemes. These high order schemes, however, are keen to introduce wiggles and spurious extrema. Iaccarino & Verzicco and Kalitzin & Iaccarino proposed a tri-linear reconstruction for the velocity components and the turbulent scalars. A modified implementation that has proven to be more robust is reported in this paper. The issue of adequate near wall resolution in a Cartesian framework can initially be addressed by using a non-uniform mesh which is stretched near the surface. In this paper, we investigate an unstructured approach for local grid refinement that utilizes Cartesian mesh features. The computation of high Reynolds number wall bounded flows is particularly challenging as it requires the consideration of thin turbulent boundary layers, i.e. near wall regions with large gradients of the flow field variables. For such flows, the representation of the wall boundary has a large impact on the accuracy of the computation. It is also critical for the robustness and convergence of the flow solver.

Kalitzin, Georgi↗

NASA NTRSDate not supplied

Exploring the Accuracy of RANS Simulations for Mars Entry Vehicles

Accurate yet inexpensive predictions of aerodynamic coefficients for Mars entry vehicles have remained a consistent challenge over the past five decades. Below Mach 6, drag on the backshell becomes significant and must be accurately predicted. Steady Reynolds-averaged Navier-Stokes (RANS) models are commonly used, despite their poor predictions of backshell pressure. While scale-resolving simulations have shown promise in the past decade, there is still a need for cheap, accurate RANS predictions for large aerodynamic databases. The Mars Science Laboratory (MSL) is used as a case study to examine predictive accuracy and known shortcomings for RANS predictions of Mars entry vehicles. Several different grid generation techniques are compared, including a comparison between prismatic boundary layer grids and fully unstructured, tetrahedral grids. Comparisons are made to experimental data for Mach 2.5, 3.5, and 4.5. The accuracy of predicted aerodynamic coefficients is examined. Overpredictions in axial force and drag are explained by a closer examination of the surface pressure. These findings document sensitivities and best practices for future RANS database development of Mars entry vehicles.

RANS↗

NASA NTRSDate not supplied

Exploring the Accuracy of RANS Simulations for Mars Entry Vehicles

CFD↗

NASA NTRS1994

Experimental Study of Vane Heat Transfer and Aerodynamics at Elevated Levels of Turbulence

A four vane subsonic cascade was used to investigate how free stream turbulence influences pressure surface heat transfer. A simulated combustor turbulence generator was built to generate high level (13 percent) large scale (Lu approximately 44 percent inlet span) turbulence. The mock combustor was also moved upstream to generate a moderate level (8.3 percent) of turbulence for comparison to smaller scale grid generated turbulence (7.8 percent). The high level combustor turbulence caused an average pressure surface heat transfer augmentation of 56 percent above the low turbulence baseline. The smaller scale grid turbulence produced the next greatest effect on heat transfer and demonstrated the importance of scale on heat transfer augmentation. In general, the heat transfer scaling parameter U(sub infinity) TU(sub infinity) LU(sub infinity)(exp -1/3) was found to hold for the turbulence. Heat transfer augmentation was also found to scale approximately on Re(sub ex)(exp 1/3) at constant turbulence conditions. Some evidence of turbulence intensification in terms of elevated dissipation rates was found along the pressure surface outside the boundary layer. However, based on the level of dissipation and the resulting heat transfer augmentation, the amplification of turbulence has only a moderate effect on pressure surface heat transfer. The flow field turbulence does drive turbulent production within the boundary layer which in turn causes the high levels of heat transfer augmentation. Unlike heat transfer, the flow field straining was found to have a significant effect on turbulence isotropy. On examination of the one dimensional spectra for u' and v', the effect to isotropy was largely limited to lower wavenumber spectra. The higher wavenumber spectra showed little or no change. The high level large scale turbulence was found to have a strong influence on wake development. The free stream turbulence significantly enhanced mixing resulting in broader and shallower wakes than the baseline case. High levels of flow field turbulence were found to correlate with a significant increase in total pressure loss in the core of the flow. Documenting the wake growth and characteristics provides boundary conditions for the downstream rotor.

Ames, Forrest E.↗

DOE OSTI2026

Generative AI for Grid Operations [Slides]

In the last few years, the development and use of generative artificial intelligence (AI) and large-language models (LLMs) have changed the landscape of how AI and machine learning (ML) are being used in power systems. LLMs are built on foundational models based on large data sets that can be trained to provide information rapidly and through simple natural language prompts. Generative AI can then perform human-like tasks using ML models to identify and mimic pattens in the data sets. This presentation explores how generative AI can enhance grid operations by improving forecasts, enabling rapid contingency analyses, and offering real-time operational suggestions. By providing grid operators with valuable insights, generative AI will empower them to manage power systems more effectively.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2026

Dust Survival in Galactic Winds

This repository contains three-dimensional volumetric data from an Eulerian hydrodynamical simulation (conducted on a uniform Cartesian grid) generated by the Cholla hydrodynamics code. The datasets contain snapshots (full-grid, projections, and slices) in the HDF5 format of a multi-phase medium in which a hot, diffuse, dust-free background wind accelerates a cool, dense cloud of gas and dust. This scenario is intended to represent a supernova-driven galactic outflow, in which hot supernova winds are thought to accelerate cool interstellar medium material out of the galactic disk into the surrounding circumgalactic medium. There are three separate datasets for simulations corresponding to three cloud evolutionary scenarios: long-term cloud survival (surv), marginal cloud survival (disr), and cloud destruction (dest). Projection and slice images of the simulations are also included in this repository.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS1991

Computational study of the aerodynamics and control by blowing of asymmetric vortical flows over delta wings

Some of the work is described which was done in a study of the flow field produced by tangential leading edge blowing on a 60 deg. delta wing. The flow is studied computationally by solving the Thin Layer Navier-Stokes equations. Steady state flow fields are calculated for various angles of attack and yaw, with and without the presence of tangential leading edge blowing. The effectiveness of blowing as a rolling moment control mechanism to extend the envelope of controllability is illustrated at pre- and post-stall angles of attack. The numerical grid is generated using algebraic grid generation and various interpolation and blending techniques. The jet emanates from a slot with linearly varying thickness and is introduced into the flow field using the concept of an actuator plane, thereby not requiring resolution of the jet slot geometry. The Baldwin-Lomax algebraic turbulence model is used to provide turbulent closure. The computational results are compared with those of experiments.

Craig, Ken↗

NASA NTRS2000

Application of Overset Technology on SIMPLEX Turbopump Design

A viewgraph presentation shows computer generated images of the Simplex Turbopump. Machine schematics are shown with scaled details of the nozzle ring assay and the turbine gas flow path. Grid generation is used to show nozzle grids, blade contours, blade grids and simplex full configuration and geometry. A flow simulation shows mach contours in absolute and relative frames.

Vu, Bruce↗

NASA NTRS1993

Unstructured Grids on NURBS Surfaces

A simple and efficient computational method is presented for unstructured surface grid generation. This method is built upon an advancing front technique combined with grid projection. The projection technique is based on a Newton-Raphson method. This combined approach has been successfully implemented for structured and unstructured grids. In this paper, the implementation for unstructured grid is discussed.

Samareh-Abolhassani, Jamshid↗

NASA NTRS1994

Direct Replacement of Arbitrary Grid-Overlapping by Non-Structured Grid

A new approach that uses nonstructured mesh to replace the arbitrarily overlapped structured regions of embedded grids is presented. The present methodology uses the Chimera composite overlapping mesh system so that the physical domain of the flowfield is subdivided into regions which can accommodate easily-generated grid for complex configuration. In addition, a Delaunay triangulation technique generates nonstructured triangular mesh which wraps over the interconnecting region of embedded grids. It is designed that the present approach, termed DRAGON grid, has three important advantages: eliminating some difficulties of the Chimera scheme, such as the orphan points and/or bad quality of interpolation stencils; making grid communication in a fully conservative way; and implementation into three dimensions is straightforward. A computer code based on a time accurate, finite volume, high resolution scheme for solving the compressible Navier-Stokes equations has been further developed to include both the Chimera overset grid and the nonstructured mesh schemes. For steady state problems, the local time stepping accelerates convergence based on a Courant - Friedrichs - Leury (CFL) number near the local stability limit. Numerical tests on representative steady and unsteady supersonic inviscid flows with strong shock waves are demonstrated.

Kao, Kai-Hsiung↗

NASA NTRS1985

Numerical solution of the Euler equations for high-speed, blended wing-body configurations

Simulation of high-speed three-dimensional flow about blended wing-body combinations is investigated. A finite-volume explicit scheme with Runge-Kutta time integration is used to solve the compressible Euler equations in order to simulate the flow. The method, augmented by carefully chosen dissipative terms and convergence accelerators such as enthalpy damping and maximum local time-stepping, has been found to be very efficient in solving high-speed flows involving strong shocks. An analytic method for generating the body geometry and an algebraic method for quasi-three-dimensional grid generation are described. Results are presented for various blended wing-body configurations at different Mach numbers and angles of attack.

Moitra, A.↗

NASA NTRS1988

Control of supersonic intersection flowfields through filleting and sweep

The problem of supersonic flow control using fillets and sweep for a wing/body junction has been investigated numerically using a three-dimensional Navier-Stokes code which employs the MacCormack time-split finite-volume technique. An elliptic grid generation technique with direct control over spacing has been incorporated for constructing the grid at a filleted wing/body junction. The computed results for pressure distribution, particle paths, and limiting streamlines on the flat plate and fin surface for a swept fin show a decrease in the peak pressure on the fin leading edge and in the extent of the separated flow region. Moreover, the results for the filleted juncture clearly show that the flow streamline patterns lose much of their vortical character with proper filleting. It is demonstrated that fillets with a radius of 3.5 times the fin leading edge diameter are required to weaken the usual necklace vortex interaction.

Lakshmanan, B.↗

NASA NTRS1993

Study of supersonic intersection flowfield at modified wing-body junctions

The problem of supersonic flow control using fillets and sweep for a wing-body junction has been investigated numerically using a three-dimensional Navier-Stokes code, which employs the MacCormack's time-split finite volume technique. An elliptic grid generation technique with direct control over spacing has been developed for constructing the grid at a filleted wing-body junction. The computed results for pressure distribution, particle paths, and limiting streamlines on the flat plate and fin surface for a swept fin show a decrease in the peak pressure on the fin leading edge and in the extent of the separated flow region. Moreover, the results for filleted juncture clearly show that the flow streamline patterns lose much of their vortical character with proper filleting. It has been demonstrated that fillets with a radius of three-and-one-half times the fin leading-edge diameter are required to weaken the vorticity in the horseshoe vortex by a factor of three for the Mach number and Reynolds number considered in the present study.

Lakshmanan, B.↗