Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FURNACE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Potential Heating Energy and Cost Savings of Dual Fuel Heat Pump Controls as a Residential Building Equipment Retrofit in the U.S.

This study investigated the energy and cost savings potential by modeling a dual fuel heat pump system with its control for a residential building in (5A) cold climate in U.S. The simulation analysis showed that the application of the DFHP system and its control to the target building can save the heating energy by 42% over a gas furnace system (baseline system). Although the HP-only system can save more heating energy (i.e., 53%) over the baseline system than DFHP system does, the DFHP with its control demonstrated the higher cost savings when a time of use electricity rate was considered.

Yoon, Yeobeom↗
DOE OSTI2023

Fiber-Optic Raman Probe for On-line EAF Slag Analysis

Here, in Electric Arc Furnace (EAF) steelmaking, the push for improved efficiency requires accurate analysis of the chemical composition of its slag system to control slag foaming, provide refractory protection, and maintain high furnace iron yield. Therefore, the ability to obtain real-time slag chemistry data would provide a useful tool to improve the control and efficiency of the process. The work reported here aims to assess the structure and chemistry of EAF slags at high temperatures using a portable fiber-optic Raman probe. As a result, the ability to relate Raman spectra peaks to chemistry and structure is demonstrated in experimental result with EAF slags at 1550°C.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Characterization and Electrochemical Analysis of Acidic Condensate-Induced Corrosion on Aluminized Coating on Steel in Residential Heaters

Condensing furnace residential heaters are starting to replace outdated and less efficient non-condensing units in homes across the US. However, the burning of natural gas in these new units produces acidic gases, which can form acid droplets (H 2 SO 4 , HNO 3 , H 2 CO 3 , etc.) that are corrosive to low-grade heat exchanger metallic materials. Type-1 aluminized steel has been used in industrial applications, such as marine, heating, and automobile parts, due to its resistance to oxidation at elevated temperature. Many components of the condensing furnaces, including heat exchangers, are made from type-1 aluminized steel. We investigated the interaction of type-1 aluminized steel substrates with two acidic condensate liquids by 500 h corrosion exposures as well as short-term electrochemical impedance measurements. SEM plan and cross-sectional view images revealed damage to the Al-Si rich layer and exposure of the steel substrate. The non-uniform damage in the Al-Si rich layer was likely attributed to a pitting corrosion mechanism and induced by high acidity of the condensate liquid. Electrochemical impedance measurements in an acidic condensate revealed lower corrosion resistance of the aluminized steel surface with a weld line, identifying welded sections as preferential corrosion initiation sites.

36 MATERIALS SCIENCE↗
DOE OSTI2025

A Preferences Corpus and Annotation Scheme for Human-Guided Alignment of Time-Series GPTs

The process of time-series forecasting such as predicting trajectories of silicon content in blast furnaces is a difficult task. Most time-series approaches today focus on scalar-type MSE loss optimization. This optimization approach, while widely common, could benefit from the use of human expert or process-level preferences. In this paper, we introduce a novel alignment and fine-tuning approach that involves learning from a corpus of preferred and dis-preferred time-series prediction trajectories. Our contributions include (1) a preference annotation pipeline for time-series forecasts, (2) the application of Score-based Preference Optimization (SPO) to train decoder-only transformers from preferences, and (3) results showing improvements in forecast quality. The approach is validated on both proprietary blast furnace data and the UCI Appliances Energy dataset. The proposed preference corpus and training strategy offer a new option for fine-tuning sequence models in industrial settings.

DPO↗
DOE OSTI2026

Techno-Economic Comparison of Molten-Salt Electrolysis and Carbothermic Reduction for the Production of Metallurgical-Grade Silicon

Metallurgical-grade silicon (MG-Si) is an important source material for many industrial applications, including the manufacture of alloys, solar photovoltaics, and electronics. The process to refine raw materials into MG-Si is energy-intensive, with the predominant method of submerged-arc furnaces requiring energy consumption of approximately 11–13 kWh/kg Si. Recent research has discussed promising methods for reducing the energy required for the silicon production process, including the use of molten-salt electrolysis (MSE), a technique that offers potential savings in energy consumption without requiring carbon inputs for the process. This paper presents a techno-economic study of a potential industrial-scale MSE plant for MG-Si production to evaluate the trade-offs between capital and operating costs of the system. Capital costs are sourced from recent MG-Si plants and an existing cost model developed for MSE processes that includes the size of the plant and the operating temperature among its inputs. The results show that MSE technology has the potential to be an economically cost-competitive option for MG-Si production if the technology successfully scales to industrial production and matures enough to allow for financing costs similar to that of a comparably sized submerged-arc furnace plant.

14 SOLAR ENERGY↗
DOE OSTI2023

A Field Study of Nonintrusive Load Monitoring Devices and Implications for Load Disaggregation

Evaluations of nonintrusive load monitoring (NILM) algorithms and technologies have mostly occurred in constrained, artificial environments. However, few field evaluations of NILM products have taken place in actual buildings under normal operating conditions. This paper describes a field evaluation of a state-of-the-art NILM product, tested in eight homes. The match rate metric—a technique recommended by a technical advisory group—was used to measure the NILM’s success in identifying specific loads and the accuracy of the energy consumption estimates. A performance assessment protocol was also developed to address common issues with NILM mislabeling and ground-truth comparisons that have not been sufficiently addressed in past evaluations. The NILM product’s estimates were compared to the submetered consumption of eight major appliances. Overall, the product had good performance in disaggregating the energy consumption of the electric water heaters, which included both electric resistance and heat-pump water heaters, but only a fair accuracy with refrigerators, dryers, and air conditioners. The performance was poor for cooking equipment, furnace fans, clothes washers, and dishwashers. Moreover, the product was often unable to detect major loads in homes. Typically, two or more appliances were not detected in a home. At least two dryers, furnace fans, and air conditioners went undetected across the eight homes. On the other hand, the dishwasher was detected in all homes where available or monitored. The key findings were qualitatively compared to those of past field evaluations. Potential areas for improvement in NILM product performance were determined along with areas where complementary technologies may be able to aid in load-disaggregation applications.

47 OTHER INSTRUMENTATION↗
NASA NTRS1964

Rapid billet loader aids extrusion of refractory metals

A combination gravity and manually powered rapid billet loader reduces the time required for transferring hot metal billets from a heating furnace to an extrusion press. Positioned between the furnace and extrusion press, this loader is a simple slide-delivery device.

Dolinshek, A. F.↗
NASA NTRS1971

Oxidation resistant claddings for superalloys.

The oxidation protection afforded IN-100 and WI-52 superalloys by thin claddings of NiCrAlSi and FeCrAlY alloys was examined primarily at 1090 C. Comparisons were made with commercial aluminide coatings using cyclic furnace and high velocity burner rig tests. In furnace tests, NiCrAlSi on IN-100 and FeCrAlY on WI-52 performed as well or better than two aluminide coatings. Burner rig performance of the FeCrAlY cladding was better than that of the NiCrAlSi cladding on IN-100 and the aluminide coating on WI-52, but less than the aluminide coating on IN-100. An aluminized NiCrAlSi cladding performed better than any coating or cladding.

Gedwill, M. A.↗
NASA NTRS1972

Oxidation resistant claddings for superalloys.

The oxidation protection afforded IN-100 and WI-52 superalloys by thin claddings of NiCrAlSi and FeCrAlY alloys was examined primarily at 1090 C. Comparisons were made with commercial aluminide coatings, using cyclic furnace and high-velocity burner rig tests. In furnace tests, NiCrAlSi on IN-100 and FeCrAlY on WI-52 performed as well as or better than two aluminide coatings. Burner rig performance of the FeCrAlY cladding was better than that of the NiCrAlSi cladding on IN-100 and the aluminide coating on WI-52, but less than the aluminide coating on IN-100. An aluminized NiCrAlSi cladding performed better than any coating or cladding.

Gedwill, M. A.↗
NASA NTRS1972

Investigation of gaseous nuclear rocket technology

The experimental and theoretical investigations conducted during the period from September 1969 through September 1972 are reported which were directed toward obtaining information necessary to determine the feasibility of the full-scale nuclear light bulb engine, and of small-scale nuclear tests involving fissioning uranium plasmas in a unit cell installed in a driver reactor, such as the Nuclear Furnace. Emphasis was placed on development of RF simulations of conditions expected in nuclear tests in the Nuclear Furnace. The work included investigations of the following: (1) the fluid mechanics and containment characteristics of one-component and two-component vortex flows, both unheated and RF-induction heated; (2) heating of particle-seeded streams by thermal radiation from a dc arc to simulate propellant heating; (3) condensation and separation phenomena for metal-vapor/heated-gas mixtures to provide information for conceptual designs of components of fuel exhaust and recycle systems; (4) the characteristics of the radiant energy spectrum emitted from the fuel region, with emphasis on definition of fuel and buffer-gas region seed systems to reduce the ultraviolet radiation emitted from the nuclear fuel; and (5) the effects of nuclear radiation on the optical transmission characteristics of transparent materials.

Kendall, J. S.↗
NASA NTRS1972

A Study of the Growth of Single Crystals

Research on the growth of single crystals of the III-V compound indium antimonide was pursued in order to gain a firsthand knowledge of some factors which govern the growth of single crystals of this compound. These studies were conducted using a standard Czochralski crystal pulling furnace. This type of furnace allows crystals to be formed without being constrained to a crucible. Several factors were found to have a large detrimental effect on the growth of single crystals of indium antimonide, the most important of which seems to be the degree to which the environment surrounding the crystal during growth can be controlled. Ways to overcome these effects were determined and are outlined.

Desmet, D. J.↗
NASA NTRS1972

Eutectic Experiment Development for Space Processing

A ground base test plan and a specimen evaluation scheme have been developed for the aluminum-copper eutectic solidification experiment to be run in the M518 multipurpose electric furnace during the Skylab mission. Besides thermal and solidification studies a detailed description is given of the quantitative metallographic technique which is appropriate for characterizing eutectic structures. This method should prove a key tool for evaluating specimen microstructure which is the most sensitive indicator of changes produced during solidification. It has been recommended that single grain pre-frozen eutectic specimens be used to simplify microstructural evaluation and to eliminate any porosity in the as-cast eutectic specimens. High purity (99.999%) materials from one supplier should be employed for all experiments. Laboratory studies indicate that porosity occurs in the MRC as-cast eutectic ingots but that this porosity can be eliminated by directional freezing. Chemical analysis shows that the MRC ingots are slightly Al rich and contain about .03% impurity. Because of the impurity content the lower cooldown rate (1.2 C/min) should be used for eutectic freezing if MRC material is used in the M518 furnace.

Hopkins, R. H.↗
NASA NTRS1973

Cyclic oxidation evaluation: Approaching application conditions

A survey is presented of the cyclic furnace and burner rig oxidation facilities at NASA-Lewis Research Center together with a review of selected test results and an initial interpretation of the data obtained. Cyclic furnace tests are used to conveniently screen alloy oxidation resistance and spall tendency; high velocity tests further indicate dynamic environmental resistance. Alloys which form scales predominantly of Cr2O3/chromite spinel spall much more than those forming alpha Al2O3/aluminate spinel scales. Weight changes due to scale spalling were used to estimate alloy depletion/thickness losses.

Barrett, C. A.↗
NASA NTRS1973

The thermal and mechanical properties of a low density elastomeric ablation material

Thermal and mechanical properties data were obtained for a low density elastomeric resin based ablation material with phenolic-glass honeycomb reinforcement. Data were obtained for the material in the charred and uncharred state. Ablation material specimens were charred in a laboratory furnace at temperatures in the range from 600 K to 1700 K to obtain char specimens representative of the ablation char layer formed during reentry. These specimens were then used to obtain effective thermal conductivity, heat capacity, porosity, and permeability data at the char formation temperature. This provided a boxing of the data which enables the prediction of the transient response of the material during ablation. Limited comparisons were made between the furnace charred specimens and specimens which had been exposed to simulated reentry conditions.

Engelke, W. T.↗
NASA NTRS1972

Studies of the performance of W-Re type thermocouples.

The effect of exposure of bare-wire and BeO-insulated commercial W-Re thermocouple materials to high temperatures in gaseous environments was investigated. The temperature range of interest was primarily 2000 to 2400 K, and the investigations were confined to thermocouple wires of 0.25 mm diameter. Thermoelements were examined for metallurgical structural changes and chemical changes by conventional methods. In the temperature range of interest, grain growth was inhibited in the chemically doped W-3% Re alloy, and excellent room-temperature ductility was retained subsequent to the exposure. The compatibility of high purity (in excess of 99.8%), sintered BeO insulators with the thermoelements differed, depending upon whether the BeO-insulated thermoelement assemblies were self-heated electrically or heated in a furnace; in tests in argon environments, highly reliable performance occurred when the assemblies were heated in a furnace. BeO-insulated W-3% Re vs W-25% Re thermocouples, constructed with degassed and aged materials, exhibited drifts equivalent to about 3 mK/hr during 1000 hours of exposure at 2073 K in argon while in the presence of tantalum.

Burns, G. W.↗
NASA NTRS1974

Fused silicon-rich coatings for superalloys

Various compositions of nickel-silicon and aluminum-silicon slurries were sprayed on IN 100 specimens and fusion-sintered to form fully dense coatings. Cyclic furnace oxidation tests in 1 atm air at 1100 C showed all the coatings to be protective for at least 600 hours, and one slurry, Al-60Si, was protective for 1000 hours. This coating also protected NASA TAZ 8A and NASA-TRW VIA for 1000 hours in the same furnace test. Alloys B 1900, TD-NiCr, and Mar-M200 were protected for lesser times, while NX 188 and NASA WAZ 20 were scarcely protected at all. Limited stress-rupture testing on 0.64-cm-diam IN 100 specimens detected no degradation of mechanical properties due to silicon diffusion.

Smialek, J. L.↗
NASA NTRS1974

The thermal and mechanical properties of a low-density glass-fiber-reinforced elastomeric ablation material

An evaluation of the thermal and mechanical properties was performed on a molded low-density elastomeric ablation material designated as Material B. Both the virgin and charred states were examined to provide meaningful inputs to the design of a thermal protection system. Chars representative of the flight chars formed during ablation were prepared in a laboratory furnace from 600 K to 1700 K and properties of effective thermal conductivity, heat capacity, porosity and permeability were determined on the furnace chars formed at various temperature levels within the range. This provided a boxing of the data which will enable the prediction of the transient response of the material during flight ablation.

Engelke, W. T.↗
NASA NTRS1973

Arc melting and homogenization of ZrC and ZrC + B alloys

A description is given of the methods used to arc-melt and to homogenize near-stoichiometric ZrC and ZrC-boron alloys, giving attention to the oxygen contamination problem. The starting material for the carbide preparation was ZrC powder with an average particle size of 4.6 micron. Pellets weighing approximately 3 g each were prepared at room temperature from the powder by the use of an isostatic press operated at 50,000 psi. These pellets were individually melted in an arc furnace containing a static atmosphere of purified argon. A graphite resistance furnace was used for the homogenization process.

Darolia, R.↗