Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FOSSIL FUELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Operating experience of a 50kWth methane chemical looping reactor

Chemical Looping Combustion (CLC) has the potential to efficiently capture CO2 from the combustion of fossil fuels at an affordable price. CLC is a process that produces a flue gas primarily consisting of CO2 and H2O. The CO2 can be easily separated and captured by condensing the H2O, similar to an oxy-fuel process. Although the process looks promising on paper, the challenge of making chemical looping a reality involves demonstrating that the process is technically feasible. To help achieve this goal, the U.S. Department of Energy’s (DOE) National Energy Technology Laboratory (NETL), has constructed and tested a 50kWth chemical looping reactor (CLR). The general arrangement of the process consists of a bubbling fluidized bed fuel reactor and a fluidized bed/riser air reactor. This paper will describe the results from a hematite ore that has been tested during a week-long test campaign.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2012

Ultra Thin Quantum Well Materials

This project has enabled Hi-Z technology Inc. (Hi-Z) to understand how to improve the thermoelectric properties of Si/SiGe Quantum Well Thermoelectric Materials. The research that was completed under this project has enabled Hi-Z Technology, Inc. (Hi-Z) to satisfy the project goal to understand how to improve thermoelectric conversion efficiency and reduce costs by fabricating ultra thin Si/SiGe quantum well (QW) materials and measuring their properties. In addition, Hi-Z gained critical new understanding on how thin film fabrication increases the silicon substrate's electrical conductivity, which is important new knowledge to develop critical material fabrication parameters. QW materials are constructed with alternate layers of an electrical conductor, SiGe and an electrical insulator, Si. Film thicknesses were varied, ranging from 2nm to 10nm where 10 nm was the original film thickness prior to this work. The optimum performance was determined at a Si and SiGe thickness of 4nm for an electrical current and heat flow parallel to the films, which was an important conclusion of this work. Essential new information was obtained on how the Si substrate electrical conductivity increases by up to an order of magnitude upon deposition of QW films. Test measurements and calculations are accurate and include both the quantum well and the substrate. The large increase in substrate electrical conductivity means that a larger portion of the electrical current passes through the substrate. The silicon substrate's increased electrical conductivity is due to inherent impurities and thermal donors which are activated during both molecular beam epitaxy and sputtering deposition of QW materials. Hi-Z's forward looking cost estimations based on future high performance QW modules, in which the best Seebeck coefficient and electrical resistivity are taken from separate samples predict that the electricity cost produced with a QW module could be achieved at < $\$$ 0.35/W. This price would open many markets for waste heat recovery applications. By installing Hi-Z's materials in applications in which electricity could be produced from waste heat sources could result in significant energy savings as well as emissions reductions. For example, if QW thermoelectric generators could be introduced commercially in 2015, and assuming they could also capture an additional 0.1%/year of the available waste heat from the aluminum, steel, and iron industries, then by 2020, their use would lead to a 2.53 trillion Btu/year reduction in energy consumption. This translates to a $\$$ 12.9 million/year energy savings, and 383.6 million lb's of CO 2 emissions reduction per year. Additionally, Hi-Z would expect that the use of QW TE devices in the automotive, manufacturing, and energy generation industries would reduce the USA's petroleum and fossil fuel dependence, and thus significantly reduce emissions from CO 2 and other polluting gasses such as NOx, SOx, and particulate matter (PM), etc.

02 PETROLEUM↗
DOE OSTI2012

Thermodynamics and Transport Phenomena in High Temperature Steam Electrolysis Cells

Hydrogen can be produced from water splitting with relatively high efficiency using high temperature electrolysis. This technology makes use of solid-oxide cells, running in the electrolysis mode to produce hydrogen from steam, while consuming electricity and high temperature process heat. The overall thermal-to-hydrogen efficiency for high temperature electrolysis can be as high as 50%, which is about double the overall efficiency of conventional low-temperature electrolysis. Current large-scale hydrogen production is based almost exclusively on steam reforming of methane, a method that consumes a precious fossil fuel while emitting carbon dioxide to the atmosphere. An overview of high temperature electrolysis technology will be presented, including basic thermodynamics, experimental methods, heat and mass transfer phenomena, and computational fluid dynamics modeling.

03 NATURAL GAS↗
DOE OSTI2017

Using Dynamic Line Rating to Enhance Flexibility of Wind-involved Hybrid Energy System

By providing real-time overhead line ampacity, Dynamic Line Rating (DLR) is a potential technique to solve the transmission congestion issues that are threatening NPPs, especially when a nuclear plant is coupled with wind turbine generators. First, DLR can utilize the concurrent cooling effect and dynamic monitors on transmission lines to increase the line carry capacity and reduce congestion. Second, more frequent interactions between transmission lines and operators can increase the flexibility and create a more dynamic and responsive hybrid system. In general, DLR can increase the flexibility and optimize the efficiency of a hybrid system utilizing wind energy. DLR helps meet continuously fluctuating electricity demands with real-time observation of transmission lines for more accurate estimation of line carry capacity. For the fuel energy, DLR can contribute greatly in saving fuels and reducing carbon emission by providing timely information for adjusting generation levels. For HES's including NPPs, transmission congestion could be more serious and needs attention. Therefore, by providing additional transmission capacity, DLR can contribute to alleviate the congestion and congestion pricing impact that is threatening the current NPPs and prevent potential congestion that may constrain the operation of future hybrid system involved with a nuclear plant. However, either a fuel plant or nuclear plant is better coupled with a wind turbine to take advantage of the concurrent cooling effect and dynamic monitoring. The research team at Idaho National Laboratory, currently focused on the benefit of DLR technology to assist wind generation, is now exploring the feasibility of implementing the same technology into such HES and NPP. Future work will focus on the analysis of technique feasibility, challenges and benefit-cost analysis of integrating DLR into HES. Detailed studies are anticipated to evaluate the benefits of DLR on HES and NPP with transmission constraints. This paper explores a potential utilization of DLR in hybrid energy systems, especially those involving traditional fossil fuels or nuclear power coupled with wind energy. The goal is to increase the efficiency and flexibility of these types of hybrid systems in order to provide more secure, reliable and low-carbon energy.

17 WIND ENERGY↗
DOE OSTI2017

Maintaining Balance: The Increasing Role of Energy Storage for Renewable Integration

For nearly a century, global power systems have focused on three key functions: generating, transmitting, and distributing electricity as a real-time commodity. Physics requires that electricity generation always be in real-time balance with load-despite variability in load on time scales ranging from subsecond disturbances to multiyear trends. With the increasing role of variable generation from wind and solar, the retirement of fossil-fuel-based generation, and a changing consumer demand profile, grid operators are using new methods to maintain this balance.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

Mid-infrared trace detection with parts-per-quadrillion quantitation accuracy: Expanding frontiers of radiocarbon sensing

Detection sensitivity is a critical characteristic to consider during selection of spectroscopic techniques. However, high sensitivity alone is insufficient for spectroscopic measurements in spectrally congested regions. Two-color cavity ringdown spectroscopy (2C-CRDS), based on intra-cavity pump–probe detection, simultaneously achieves high detection sensitivity and selectivity. This combination enables mid-infrared detection of radiocarbon dioxide ( 14 CO 2 ) molecules in room-temperature CO 2 samples, with 1.4 parts-per-quadrillion (ppq, 10 − 15 ) sensitivity (average measurement precision) and 4.6-ppq quantitation accuracy (average calibrated measurement error for 21 samples from four separate trials) demonstrated on samples with 14 C/C up to ∼ 1.5 × natural abundance ( ∼ 1,800 ppq). These highly reproducible measurements, which are the most sensitive and quantitatively accurate in the mid-infrared, are accomplished despite the presence of orders-of-magnitude stronger, one-photon signals from other CO 2 isotopologues. This is a major achievement in laser spectroscopy. A room-temperature-operated, compact, and low-cost 2C-CRDS sensor for 14 CO 2 benefits a wide range of scientific fields that utilize 14 C for dating and isotope tracing, most notably atmospheric 14 CO 2 monitoring to track CO 2 emissions from fossil fuels. The 2C-CRDS technique significantly enhances the general utility of high-resolution mid-infrared detection for analytical measurements and fundamental chemical dynamics studies.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2012

Understanding Nitrogen Fixation

The purpose of our program is to explore fundamental chemistry relevant to the discovery of energy efficient methods for the conversion of atmospheric nitrogen (N 2 ) into more value-added nitrogen-containing organic molecules. Such transformations are key for domestic energy security and the reduction of fossil fuel dependencies. With DOE support, we have synthesized families of zirconium and hafnium dinitrogen complexes with elongated and activated N-N bonds that exhibit rich N 2 functionalization chemistry. Having elucidated new methods for N-H bond formation from dihydrogen, C-H bonds and Broensted acids, we have since turned our attention to N-C bond construction. These reactions are particularly important for the synthesis of amines, heterocycles and hydrazines with a range of applications in the fine and commodity chemicals industries and as fuels. One recent highlight was the discovery of a new N 2 cleavage reaction upon addition of carbon monoxide which resulted in the synthesis of an important fertilizer, oxamide, from the diatomics with the two strongest bonds in chemistry.

03 NATURAL GAS↗
DOE OSTI2023

Unique nanotechnology converts carbon dioxide to valuable products

Carbon capture and management are increasing challenges associated with global warming. Current commercial-scale carbon dioxide (CO 2 ) capture technologies are associated with a heavy economic penalty – they require at least one-third of the plant’s steam and power to operate. The objective of this project was to develop and test an innovative nanotechnology that can utilize CO 2 , from coal-based power systems or other industrial sources, as the primary feedstock to produce commercially valuable products to potentially offset the cost of CO 2 capture. The scope of this project includes conversion of CO 2 to nanomaterials using two unique amino acids in synthetic flue gases and the completion of a process design and techno-economic and lifecycle analyses to demonstrate the economic feasibility and environmental impact of the developed technology. The International Energy Agency predicts that fossil fuels will continue to play a significant role in meeting global energy demand. The goal of the research is to lead to an affordable and transformational CO 2 capture and reuse technology that will reduce the release of CO 2 thereby reducing global climate variability and its enormous impact on our daily lives.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2012

Gaseous fission product management for molten salt reactors and vented fuel systems

Fission gas disposal is one of the unresolved difficulties for Molten Salt Reactors (MSRs) and advanced reactors with vented fuel systems. As these systems operate, they produce many radioactive isotopes of xenon and krypton (e.g. {sup 135}Xe t{sub 1/2} = 9.14 hours and {sup 85}Kr t{sub 1/2}= 10.73 years). Removing these gases proves vital to the success of such reactor designs for two reasons. First, the gases act as large neutron sinks which decrease reactivity and must be counterbalanced by increasing fuel loading. Second, for MSRs, inert fission product gases naturally separate quickly from high temperature salts, thus creating high vapor pressure which poses safety concerns. For advanced reactors with solid vented fuel, the gases are allowed to escape into an off-gas system and thus must be managed. Because of time delays in transport of fission product gases in vented fuel systems, some of the shorter-lived radionuclides will decay away thereby reducing the fission gas source term relative to an MSR. To calculate the fission gas source term of a typical molten salt reactor, we modeled a 1000 MWe graphite moderated thorium MSR similar to that detailed in Mathieu et al. [1]. The fuel salt used in these calculations was LiF (78 mole percent) - (HN)F 4 (22 mole percent) with a heavy nuclide composition of 3.86% {sup 233}U and 96.14% {sup 232}Th by mass. Before we can remove the fission product gases produced by this reactor configuration, we must first develop an appropriate storage mechanism. The gases could be stored in pressurized containers but then one must be concerned about bottle failure. Methods to trap noble gases in matrices are expensive and complex. Alternatively, there are direct storage/disposal options: direct injection into the Earth or injecting a grout-based product into the Earth. Advances in drilling technologies, hydro fracture technologies, and methods for the sequestration of carbon dioxide from fossil fuel plants are creating new options for disposal of fission gas wastes. In each option, lithostatic pressure, a kilometer or more underground, eliminates the pressure driving force for noble gas release and dissolves any untrapped gas in deep groundwater or into incorporated solid waste forms. The options, challenges, and potential for these methods to dispose of gaseous fission products are described. With this research, we hope to help both MSRs and other advanced reactors come one step closer to commercialization. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2023

Cost and Performance Projections for Coal- and Natural Gas-Fired Power Plants

This report provides quantitative estimates of future cost and performance improvements for fossil-fueled power plants equipped with carbon capture developed through the adaption/modification of relevant Aspen Plus ® case study models from published NETL techno-economic analyses. The cost and performance estimates in this report are meant to represent prospective improvements that may be realized for low-carbon-emitting PC and NGCC power plants through robust commercial deployment (e.g., learning by doing) of high TRL technologies as well as additional investments in targeted RD&D activities. The methodology used to develop the estimates in this report is intended to allow direct comparison of the technology improvements with the SOA baseline published in NETL’s Fossil Energy Baseline (Rev 4a) Report.

20 FOSSIL-FUELED POWER PLANTS↗
NASA NTRS2013

Response to Comment on 'Prevented Mortality and Greenhouse Gas Emissions from Historical and Projected Nuclear Power'

Sovacool et al.'s analysis of our paper contains numerous errors, misinterpretations, and dubious assumptions. For instance, we make no presumption in our paper that nuclear power is the only major option to replace fossil fuels nor have we in the past, as evidenced by our other peer-reviewed publications. Furthermore, all of our results are based on complete fuel cycle analysis and are presented as mean values along with their ranges. Thus it is incorrect to claim that we single out the worst estimates for coal mortality. Contrary to Sovacool et al.'s assertions, our only bias is our belief that humanity's best chance of success for mitigating the daunting challenge of climate change is to utilize all available and proven means.

coal↗
DOE OSTI2018

Potential impacts of China's climate policies on energy security

Highlights: • We develop an energy security assessment framework in a 3E-integrated system model. • The potential relations between climate targets and energy security are examined. • Climate policy reduces risks of energy system in terms of main safety metrics. • The impact of emission budgets on energy diversity relies on the time scale options. • Co-benefits of energy security would improve the economics of climate policies. - Abstract: Energy security, as an indispensable constituent of economic security, has long been a top research priority, and the dynamics of energy security become particularly complicated with the involvement of climate change. In this work, we combined a one-sector integrated assessment framework with a series of well-proposed energy security metrics to extensively explore the unidirectional consistency between climate policy and energy security from the national perspective. Implementation of climate policy is generally beneficial for improving energy security. Specifically, climate policy helps to reduce the systematic risk of China's energy system according to the metrics of energy (oil) intensity, energy (oil) expenditures and per capita energy (oil) consumption independent of time scale options. As observed from the perspective of energy diversity, co-benefits arising from climate policy primarily emerge in the first half of this century, and they may gradually decline as emission constraints and the phasing out of fossil fuels are enhanced. Additionally, the macroeconomic costs required to reach China's committed carbon-peaking target might be far lower than the costs required to fulfill the emission budgets under the global 2-degree warming rise threshold. If the co-benefits of energy security are considered, the economics of climate policy is expected to significantly improve.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2014

Implementation of optimum solar electricity generating system

Under the 10{sup th} Malaysian Plan, the government is expecting the renewable energy to contribute approximately 5.5% to the total electricity generation by the year 2015, which amounts to 98MW. One of the initiatives to ensure that the target is achievable was to establish the Sustainable Energy Development Authority of Malaysia. SEDA is given the authority to administer and manage the implementation of the feed-in tariff (FiT) mechanism which is mandated under the Renewable Energy Act 2011. The move to establish SEDA is commendable and the FiT seems to be attractive but there is a need to create awareness on the implementation of the solar electricity generating system (SEGS). In Malaysia, harnessing technologies related to solar energy resources have great potential for implementation. However, the main issue that plagues the implementation of SEGS is the intermittent nature of this source of energy. The availability of sunlight is during the day time, and there is a need for electrical energy storage system, so that there is electricity available during the night time as well. The meteorological condition such as clouds, haze and pollution affects the SEGS as well. The PV based SEGS is seems to be promising electricity generating system that can contribute towards achieving the 5.5% target and will be able to minimize the negative effects of utilizing fossil fuels for electricity generation on the environment. Malaysia is committed to Kyoto Protocol, which emphasizes on fighting global warming by achieving stabilization of greenhouse gas concentrations in the atmosphere at a level that would prevent dangerous anthropogenic interference with the climate system. In this paper, the technical aspects of the implementation of optimum SEGS is discussed, especially pertaining to the positioning of the PV panels.

14 SOLAR ENERGY↗
DOE OSTI2024

Enabling the Next Generation of Smart Sensors in Coal Fired Power Plants using Cellular 5G Technology

An important need for coal fired power plants is the ability to monitor multiple systems with ease and accuracy. Common implementations of these monitoring systems come with drawbacks due to the nature of coal fired power plants. Harsh environments, High Temperatures, and lots of RF (Radio Frequency) noise can create issues for accurately recording and transmitting data across wireless signals. In addition, as renewable energy sources come online, existing fossil fueled plants will need to operate more flexibly with their maintenance schedules outside of standard conditions. Therefore, additional sensing and control mechanisms need placed in existing plants to provide operators with more information such that maintenance decisions can be made well in advance of failures. A solution to this problem is the Next Generation of Smart Sensors, which leverages the power of 5G cellular signals and machine learning to overcome the myriad of problems with current implementations

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2025

Low-Cost, Scalable Sorbents with Balanced Capacity-Kinetics-Thermodynamics for H2 Storage

The goal of this project is to utilize cutting-edge materials science, chemistry, and process engineering to demonstrate the feasibility of a new class of scalable sorbents with unprecedented balance of capacity-kinetics-thermodynamics for H 2 storage in fossil fuel power plants . The core fabrication leverages the unique exotic properties (e.g., high H 2 affinity, ultrahigh surface area, and exceptional thermal, mechanical and chemical stability) of the emerging 2D materials i.e. hexagonal boron nitride (hBN) followed by strategic coupling with alkali metals (Li, Na) dopants and optimal interlayer distance to deliver a stable, long-term energy storage for the grid. Figure 1 shows how this technology works.

08 HYDROGEN↗
DOE OSTI2024

Environmental Validation of Materials and Design Concepts to Enable Operational Flexibility of Existing Coal Power Plants

Increasingly, coal-fired power plants are required to balance power grids by compensating for the variable electricity supply from renewable energy sources. Fossil-fueled power plants, originally designed to be base loaded, will increasingly need to operate on a load following or cyclic basis. This demanding requirement for operational flexibility will need to be evaluated for resilience to frequent start-ups, meeting major and rapid load changes, and providing frequency control duties. Our research objective was to evaluate and improve flexibility of existing power plants by improving and redesigning components and defining new operational strategies, with acceptable impacts on component life, efficiency and emissions.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2012

Diffusion Welding of Alloys for Molten Salt Service – Status Report

The present work is concerned with heat exchanger development for molten salt service, including the proposed molten salt reactor (MSR), a homogeneous reactor in which the fuel is dissolved in a circulating fluid of molten salt. It is an outgrowth of recent work done under the Next Generation Nuclear Plant (NGNP) program; what the two reactor systems have in common is an inherently safe nuclear plant with a high outlet temperature that is useful for process heat as well as more conventional generation The NGNP program was tasked with investigating the application of a new generation of nuclear power plants to a variety of energy needs. One baseline reactor design for this program is a high temperature, gas-cooled reactor (HTGR), which provides many options for energy use. These might include the conventional Rankine cycle (steam turbine) generation of electricity, but also other methods: for example, Brayton cycle (gas turbine) electrical generation, and the direct use of the high temperatures characteristic of HTGR output for process heat in the chemical industry. Such process heat is currently generated by burning fossil fuels, and is a major contributor to the carbon footprint of the chemical and petrochemical industries. The HTGR, based on graphite fuel elements, can produce very high output temperatures; ideally, temperatures of 900°C or even greater, which has significant energy advantages. Such temperatures are, of course, at the frontiers of materials limitations, at the upper end of the performance envelope of the metallic materials for which robust construction codes exist, and within the realm of ceramic materials, the fabrication and joining of which, on the scale of large energy systems, are at an earlier stage of development. A considerable amount of work was done in the diffusion welding of materials of interest for HTGR service with alloys such as 617 and 800H. The MSR output temperature is also materials limited, and is projected at about 700°C. (RR E) A different set of alloys, such as Alloy N and 242, are needed to handle molten salts at this temperature. The diffusion welding development work described here builds on techniques developed during the NGNP work, as applied to these alloys. There is also the matter of dissimilar metal welding, since alloys suitable for salt service are generally not suited for service in gaseous oxidizing environments, and vice versa, and welding is required for the Class I boundaries in these systems, as identified in the relevant ASME codes.

02 PETROLEUM↗
DOE OSTI2019

"250 kWt Pilot Testing in Support of a 10 MWe Coal-Direct Chemical Looping Demonstration Feasibility Study

The Babcock & Wilcox Company and The Ohio State University are developing iron-based metal oxide chemical looping technology for power generation and conversion of fossil fuels to chemicals and liquid fuels. A 250 kWt pilot facility has been constructed at the Babcock & Wilcox Research Center in Barberton, Ohio. Testing was conducted on the facility to support scale-up of the technology for implementation in a 10 MWe coal direct chemical looping large pilot plant at Dover Light & Power in Dover, Ohio. The paper discusses the results of the pilot test and the impact of the results on the design of the large pilot facility.

20 FOSSIL-FUELED POWER PLANTS↗