Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FILAMENTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

The Crab Nebula. I - Spectrophotometry of the filaments

Relative line intensities in the 3700-7400 A region are obtained from new spectrophotometric measurements of ten positions in the Crab Nebula. O III forbidden line intensities imply electron temperatures of 11,000-18,300 K, while generally lower temperatures are indicated by the O II, N II and S II forbidden lines. The 6717 and 6731 A forbidden S II line ratio yields electron density estimates of 550-3500/cu cm, with a typical filament value of 1300 cu cm. While Balmer decrements are generally consistent with pure recombination, some filaments show steeper decrements. He line intensities are found to have significant variation. The presence of a moderately strong line at 7378 A, which may be due to the Ni II forbidden line is confirmed. Some filaments are found to exhibit a wide range of ionization states.

Fesen, R. A.↗
NASA NTRS1983

The shape of cooling filaments in old supernova remnants

The evolution of a filament in an old supernova remnant is investigated in two dimensions using analytical methods to determine its structure and stability and to show whether it collapses into a sheet or a cylinder. All parameters are assumed constant along the length of the feature. The cross section of the filament is found to flatten as it cools, and to degenerate into a thin sheet which is unstable to asymmetric warping disturbances. This probably leads to a number of parallel striations as the filament splits up, consistent with observations in the Cygnus Loop. The ratio of depth to width is typically 10:1, and so the feature may appear to be tubelike or a sheet, depending on perspective. The application to Vela and Puppis, IC 443, S 147, and CTB 1 is pointed out.

Smith, M. D.↗
NASA NTRS1984

Oscillations and stationary motions in filaments

Observations of oscillations in filaments, which are cold magnetic structures suspended in the corona, are used to test theories of coronal heating by acoustic waves high in the atmosphere. Long lived stationary motions observed in filaments suggest exchanges of material between them and the surrounding corona. A coupling between upflows in filaments and subphotospheric convective motions, dragging the field lines of the prominence magnetic support, is possible.

Schmieder, B.↗
NASA NTRS1985

Filamental quenching of the current-driven ion-cyclotron instability

Since their discovery by D'Angelo and Motley (1962), ion-cyclotron waves have been an area of active research. Drummond and Rosenbluth (1962) have first conducted a theoretical analysis of the current-driven ion-cyclotron wave instability, taking into account a uniform, magnetized plasma, without magnetic shear, in which electrons drift along B field lines with the same drift velocity at all points in the plasma. Bakshi et al. (1983) have found conditions for which the instability is completely quenched. This phenomenon has been referred to as filamental quenching. The present investigation is concerned with a systematic test of the filamental quenching effect. It is found that filamental quenching operates at widths of the current channel comparable to the local Larmor radius, in agreement with the conclusions of Bakshi et al.

Cartier, S. L.↗
NASA NTRS1986

Filament disappearances

The phenomenon of the sudden filament disappearance (Disparition Brusque) is a familiar one to observers at H alpha telescopes. Nevertherless, the importance in Disparition Brusques (DB) continues to grow for several reasons which are cited in the discussion. It is reported that there seems to be more interest on building and maintain filaments than in destroying them. As a consequence, this sub-group is smaller than most of the others. All the same, progress in this area of filament disapperences seems steady and assured. The importance and interest in DBs is discussed and future directions are indicated.

Wagner, William J.↗
NASA NTRS1986

Interplanetary shocks preceded by solar filament eruptions

The solar and interplanetary characteristics of six interplanetary shock and energetic particle events associated with the eruptions of solar filaments lying outside active regions are discussed. The events are characterized by the familiar double-ribbon H-alpha brightenings observed with large flares, but only very weak soft X-ray and microwave bursts. Both impulsive phases and metric type II bursts are absent in all six events. The energetic particles observed near the earth appear to be accelerated predominantly in the interplanetary shocks. The interplanetary shock speeds are lower and the longitudinal extents considerably less than those of flare-associated shocks. Three of the events were associated with unusual enhancements of singly-ionized helium in the solar wind following the shocks. These enhancements appear to be direct detections of the cool filament material expelled from the corona. It is suggested that these events are part of a spectrum of solar eruptive events which include both weaker events and the large flares. Despite their unimpressive and unreported solar signatures, the quiescent filament eruptions can result in substantial space and geophysical disturbances.

Cane, H. V.↗
NASA NTRS1987

A method for overcoming the velocity space filamentation problem in collisionless plasma model solutions

The solution of filtered Vlasov-Maxwell equations, rather than the Vlasov-Maxwell equations themselves, is shown to ameliorate the velocity space filamentation problem in collisionless plasma models. Exact field solutions and filtered velocity distribution functions are obtained without introducing errors. Proper selection of the filter width is demonstrated to inhibit development of velocity space filamentation and, it is conjectured, position space filamentation. The results of sample calculations of both filtered and nonfiltered field solutions illustrate a high degree of agreement between both solutions, with significant savings in computational time and memory requirements with the filtered solutions.

Klimas, Alexander J.↗
NASA NTRS1987

Dynamics of solar filaments. V - Oscillations in the H-alpha and 1548 A C IV lines

The Multichannel Subtractive Double Pass (MSDP) Spectrograph operating in the Meudon solar tower and the Ultraviolet Spectrometer and Polarimeter (UVSP) aboard the Solar Maximum Mission (SMM) satellite are used to analyze, by Fourier transform technique, time sequence observations of filaments in both the H-alpha line and in the 1548 A C IV line. The H-alpha data confirm previous findings that there are no oscillations at the location of the filament in the observed range 1-10 mHz. In the C IV line, power is observed in some parts of the filament where a steady velocity gradient is present, e.g. in the footpoints. The energy is probably due to convection motions rather than pressure oscillations.

Malherbe, J. M.↗
NASA NTRS1988

Diamond film by hot filament CVD method

Diamond synthesis by the hot filament CVD method is discussed. A hot filament decomposes gas mixtures and oxygen containing organic compounds such as alcohols. which are carbon sources. The resulting thin films, growth mechanisms, and characteristics and problems associated with the hot filament CVD method are analyzed and evaluated.

Hirose, Y.↗
NASA NTRS1988

Interaction and merging of vortex filaments

The asymptotic solutions of Navier-Stokes equations for vortex filaments of finite strength with small effective vortical cores are summarized with special emphasis placed on the physical meaning and the practical limit to the applicability of the asymptotic solution. Finite-difference solutions of Navier-Stokes equations for the marging of the filament(s) are described with a focus on the development of the approximate boundary conditions for the computational domain. An efficiency study employing a model problem is used to assess the advantages of the present approximate boundary condition method over previously used techniques. Applications of the present method are presented for the motion and decay of a 3:1 elliptic vortex ring, and for the merging process of a pair of coaxial vortex rings. A numerical procedure for the problem of local merging of vortex filaments, which requires the asymptotic analysis as well as the numerical Navier-Stokes solver, is also presented.

Liu, C. H.↗
NASA NTRS1988

Filamentation instability of large-amplitude Alfven waves

An instability that leads to the filamentation of large-amplitude Alfven waves and gives rise to purely growing density and magnetic field fluctuations is studied. The dispersion relation of the instability is derived, from which the threshold conditions and the growth rates of the instability are analyzed quantitatively for applications to the solar wind plasma. Their dependence on the filamentation spectrum, the plasma beta, and the pump frequency and intensity was examined for both right-hand and left-hand circularly polarized Alfven waves. The excitation of filamentation instability for certain cases of interest is discussed and compared with that of the parametric decay and modulation instability. The relevance of the proposed instability to some observations is discussed.

Kuo, S. P.↗
NASA NTRS1988

The vertical structure of arch filament systems in solar emerging flux regions

The paper studies the vertical velocity of arch filaments in emerging flux regions by measuring their proper motion near the limb in H-alpha filtergrams and their radial velocity near the disk center in H-alpha spectrograms. Both show that arch filaments rise at a velocity between 10 and 15 km/s. The possible mechanisms producing this high velocity are discussed. None of them is satifactory, but it appears that the unloading of the arches by outflow must play a role. From the strength of H-alpha emission and D3 absorption, the temperature of arch filaments is estimated at 6000-15,000 K and the density at 10 to the 11th-12th/cu cm.

Chou, Dean-Yi↗
NASA NTRS1988

Spur-type instability observed on numerically simulated vortex filaments

An instability observed on vortex filaments during numerical simulations of the three-dimensional, time-dependent dynamics of vortex wakes is studied to determine when and why it occurs. It is concluded that the observed instability is a consequence of the use of straight-line vortex segments of finite length to model continuously curving vortex filaments. The instability appears to occur only when the link length is a sizable fraction of the vortex span and, therefore, is not expected in an experiment. Guidelines are then given that help avoid numerical instabilities when vortex filaments are used in flow simulations.

Rossow, Vernon J.↗
NASA NTRS1989

Microwave evidence for large-scale changes associated with a filament eruption

VLA observations at 6 and 20 cm wavelengths taken on August 3, 1985 are presented, showing an eruptive filament event in which microwave emission originated in two widely separated regions during the disintegration of the filament. The amount of heat required for the enhancement is estimated. Near-simultaneous changes in intensity and polarization were observed in the western components of the northern and southern regions. It is suggested that large-scale magnetic interconnections permitted the two regions to respond similarly to an external energy or mass source involved in the disruption of the filament.

Kundu, M. R.↗
NASA NTRS1990

Hot filament technique for measuring the thermal conductivity of molten lithium fluoride

Molten salts, such as lithium fluoride, are attractive candidates for thermal energy storage in solar dynamic space power systems because of their high latent heat of fusion. However, these same salts have poor thermal conductivities which inhibit the transfer of heat into the solid phase and out of the liquid phase. One concept for improving the thermal conductivity of the thermal energy storage system is to add a conductive filler material to the molten salt. High thermal conductivity pitch-based graphite fibers are being considered for this application. Although there is some information available on the thermal conductivity of lithium fluoride solid, there is very little information on lithium fluoride liquid, and no information on molten salt graphite fiber composites. This paper describes a hot filament technique for determining the thermal conductivity of molten salts. The hot filament technique was used to find the thermal conductivity of molten lithium fluoride at 930 C, and the thermal conductivity values ranged from 1.2 to 1.6 W/mK. These values are comparable to the slightly larger value of 5.0 W/mK for lithium fluoride solid. In addition, two molten salt graphite fiber composites were characterized with the hot filament technique and these results are also presented.

Jaworske, Donald A.↗
NASA NTRS1989

On the mechanics of filament winding. I - A generalized model

In this paper the filament winding process was analyzed to relate process variables to structural parameters. An analytical model has been developed for a filament wound preform by determining the necessary geometric and kinematic conditions. An equation of motion of winding was developed to predict layer by layer geometry using the mandrel shape as the initial boundary condition. This model provides the laws of motion of the traverse stroke relative to the mandrel to ensure that the filament laydown is of the predetermined geodesic path over the mandrel, that the winding density is distributed over the mandrel in the prearranged manner, and that the winding build is being formed to reproduce the preassigned shape or contour of the preform. From this analysis, the winding process parameters can be controlled accordingly to produce any given shape. The analytical model was used to produce computer simulation of the winding process. The dynamic simulation of the winding process visualizes and inspects the layer by layer path of the tow and provides process variables required to produce preforms of optimum structural parameters.

Hamouda, Hechmi↗
NASA NTRS1992

Making Crystal Filaments From Extruded Ceramic Rods

New process produces single-crystal fibers of ceramic or metal at lower cost. Single-crystal filament drawn from tip of extruded polycrystalline rod. Extrusion produces longer rods from which longer fibers drawn. Potentially feeds single fiber drawing process directly. Continuous filaments made, and material not subjected to contamination from storage and transfer to drawing machine. Filaments used as reinforcing fibers in composite materials.

Westfall, Leonard J.↗
NASA NTRS1991

Filament disappearances and associated shocks of May 1979

In late May 1979 a shock was seen at each of two locations separated by about 90 deg in heliolongitude and at about the same time. A shock was detected near the earth, and a shock was detected at Helios 1 when it was off the sun's west limb. Some authors have considered that these shocks were part of the same event, which originated with a filament disappearance near 65 deg W. The paper discusses the observations which show that a large complex filament, extending from 20 deg to 70 deg W, disappeared in several places, probably generating more than one shock. The shock detected near earth was probably associated with a filament section which disappeared near the central meridian. If this is the case, then the interplanetary scintillation observations of this time period can be explained without invoking highly anisotropic shock propagation.

Cane, H. V.↗