Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Experimental physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Isomeric Cross Sections For 87 Y(n,$γ$) From Surrogate (p,d$γ$) Data

Cross sections for compound-nuclear reactions involving unstable targets are important for many applications, but can often not be measured directly. Recently, I developed a method for extracting cross sections for neutron-capture on unstable isotopes from indirect (surrogate) reaction data. I applied the method to $89$ Y(p,$γ$) data, which were supplied by the LLNL experimental nuclear physics program, to determine the $87$ Y(n,$γ$) (activation) cross section. Here, I extend the approach further, in order to determine cross sections for reactions that start and/or end at isomeric states. In particular, I determine cross sections, along with uncertainties, for seven additional reactions: $87$ Y(n,$γ$) $88gs$ Y, $87$ Y(n,$γ$) $88m1$ Y, $87$ Y(n,$γ$) $88m2$ Y, $87m$ Y(n,$γ$) $88$ Y (activation), $87m$ Y(n,$γ$) $88gs$ Y, $87m$ Y(n,$γ$) $88m1$ Y, $87m$ Y(n,$γ$) $88m2$ Y. These cross sections cannot be measured directly.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Measurements of fission gas release from nuclear fuel in support of BISON fuel performance analysis

This project established a fuel irradiation and fission gas release (FGR) loop that has been designed for implementation at the PULSTAR reactor of North Carolina State University (NCSU). The FGR loop is capable of analyzing various types of fuel samples including, e.g., uranium dioxide fuel (UO 2 ) and uranium silicide (U 3 Si 2 ) samples. The fuel samples were produced and characterized at Idaho National Laboratory (INL) and shipped NCSU. The samples are ready for irradiation in the FGR loop to a given total thermal neutron fluence and under controlled temperature conditions. An innovative high resolution gamma-ray spectrometry approach and instrumentation have been established to monitor the loop’s sweep gas and perform high accuracy measurements of the gas release rates relative to predicted birth rates to establish the release-to-birth ratio (R/B) for a given radionuclide. In addition, uncertainty minimization is achieved through the formulation of the measurement observables into relative release-to-birth indicators for selected radionuclides. The experimental findings will be utilized to enhance and validate the fission gas release models that are currently implemented in the BISON fuel performance code. The experimentally deduced physical parameters will be incorporated in BISON’s fission gas release models. Atomistic simulations of fuel behavior have been performed to investigate the mechanisms of fission gas migration in the fuel. At this stage, performance of the fuel irradiation experiments awaits licensing approval by the US NRC.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Results of the Collaborative International Evaluated Library Organization (CIELO) Project

Simulation of nuclear systems requires complete data that represents the relevant nuclear physics. This requires many types of experimental measurements, theoretical physics, semi-empirical models and software systems, as well as experts to integrate and guide the process. This discipline is collectively known as nuclear data, and separate programmes within various European countries, the USA, Japan, Russia, and other OECD Nuclear Energy Agency (NEA) member countries have been operating for many decades. The NEA Working Party on International Nuclear Data Evaluation Co-operation (WPEC) exists to improve the quality and completeness of nuclear data by bringing together representatives of the major nuclear data evaluation projects of NEA member countries and selected Invitees. The Sub- and Expert Groups of the WPEC typically focus on specific technical topics, while the Collaborative International Evaluated Library Organisation Pilot Project (CIELO) was established to generate complete evaluations for a selection of the most important isotopes for criticality in nuclear technologies: 235,238 U, 239 Pu, 56 Fe, 16 O and 1 H.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Growth of New High-Quality and Large-Size Single Crystals via High Pressure Floating-Zone Technique

This award supports experimental materials physics research on a class of technologically relevant materials that cannot form under ambient conditions. With the complementary expertise at Louisiana State University (LSU) and infrastructure at Oak Ridge National Laboratory (ORNL), single crystals of these materials will be synthesized using the high-pressure floating-zone technique. Our ability to grow high-quality single crystals will facilitate advanced characterization of these materials and improve the scientific outcomes. In addition to in-house material characterization, the principle investigator will partner with scientists at ORNL and Brookhaven National Laboratory (BNL) to tackle materials problems using the state-of-the-art characterization techniques. This will allow us to explore the fundamental physics underlying the emergent phenomena only seen in materials prepared under extreme conditions. Our ultimate goal is to address one of the grand challenges of materials science: how do complex phenomena emerge from simple ingredients? The proposed project will also spearhead a unique opportunity to train “new breed” scientists, co-advised by experts at both LSU and U. S. Department of Energy National Laboratories. They will be essential for expanding materials physics research with ability to grow crystals, characterize their properties, and design new materials -- an imperative skill that is scarce in the U. S. scientific community.

36 MATERIALS SCIENCE↗

JANA2 LDRD (Final Project Report)

The project sought to develop a second generation of the JANA reconstruction framework that leverages modern programming features (C++11 and C++14) while maintaining its basic user centric design. The goals included making the project easy to deploy to large HPC facilities such as NERSC and to include detailed documentation to allow scientists outside of Jefferson Lab to use it at such a facility. This would position JLab to play a key role in the larger Laboratory based computing ecosystem under the ASCR initiative. The experience gained will help inform the design of Exascale class applications for experimental nuclear physics. Developing a next generation JANA provides an advantage over older serial frameworks or ones retro-fitted to provide some multi-threading support. That technique requires significantly more memory than multi-threading which leads to compute jobs being limited by available RAM, and not fully utilizing the available CPU. The smaller memory footprint of multi-threaded programs also leads to increased efficiency due to fewer cache misses. It is for these and other reasons that multi-threading is the more accepted industry standard in the modern era.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Measuring Electron Diffusion and Constraining the Neutral Current $\pi^0$ Background for Single-Photon Events in MicroBooNE

Liquid Argon Time Projection Chambers (LArTPCs) are a rising technology in the field of experimental neutrino physics. LArTPCs use ionization electrons and scintillation light to reconstruct neutrino interactions with exceptional calorimetric and position resolution capabilities. Here, I present two analyses conducted in the MicroBooNE LArTPC at Fermilab: a measurement of the longitudinal electron diffusion coefficient, $D_L$, in the MicroBooNE detector and a constraint of the systematic uncertainty on MicroBooNE's single-photon analysis due to the dominant neutral current (NC) \piz{} background. Longitudinal electron diffusion modifies the spatial and timing resolution of the detector, and measuring it will help correct for these effects. Furthermore, current measurements of $D_L$ in liquid argon are sparse and in tension with one another, making the MicroBooNE measurement especially valuable. We report a measurement of $3.74^{+0.28}_{-0.29}$ cm$^2$/s. MicroBooNE is searchin g for si ngle-photon events as a potential explanation for the MiniBooNE low-energy excess (LEE) of electron neutrino-like events, which has been interpreted as evidence for low-mass sterile neutrinos. However, this search is overwhelmed by a large NC \piz{} background. By performing a sideband selection of NC \piz{} events, we apply a data-driven rate constraint to the single-photon analysis to reduce the systematic uncertainties. At present, this constraint improves the single-photon analysis' median sensitivity to the LEE-like signal from 0.9$\sigma$ to $1.5\sigma$. This sensitivity is expected to improve significantly as more data become available. Both of these measurements will not only benefit MicroBooNE, but also inform future LArTPC experiments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Disruption Prediction and Avoidance in High Beta Long Pulse KSTAR Plasmas

This research is a concentrated and coordinated experimental and physics analysis program by a small U.S. team, focused on the topical area of “Long Pulse Control” as stated in the proposal solicitation. The overall goal of the research is to produce world-class analysis regarding forecasting and avoidance of disruptions in a long-pulse, superconducting tokamak at high stability parameters (e.g. normalized beta) with direct, quantifiable figures of merit (i.e. plasma disruption rate - “disruptivity”) and its reduction based on improved stability physics and control. The research targets the backbone of the problem – the basic, main issues – to produce this quantitative analysis by: (1) Creating and applying a new physics-based paradigm to understand how to eliminate disruptions: disruption event characterization, and event chain analysis – a direct manifestation of the approach suggested in the DOE Transients Report, (2) Ensuring that the components required to produce high-quality measurements and analysis needed for disruption event characterization for the tokamak in question (here, KSTAR) exist (e.g. pressure profile peaking, high-accuracy pitch angle data, compensated low frequency toroidal mode number n = 1 mode measurement) to create a primarily physics-based disruption forecasting capability, and (3) Addressing disruption avoidance for the first time in KSTAR by attacking primary disruption ‘event chains’, utilizing the most important associated plasma measurements (dynamic n = 1 field). The focus of this work will be avoidance of macroscopic instabilities, especially global modes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High Energy Experimental Research Effort: Intensity Frontier Physics with Liquid Argon Time Projection Chambers (Final Technical Report DE-SC0017925)

The proposal “University of Florida High Energy Physics Intensity Frontier Research: Liquid Argon Detectors” requested one year of funding support for the PI, one postdoc and one graduate student to start their involvement in ongoing and upcoming experiments that use Liquid Argon Time Projection Chambers (LAr TPCs) to reconstruct neutrino interactions. Specifically, it was proposed that the group join the Short Baseline Near Detector (SBND) at Fermilab and that the PI continue their involvement in the Deep Underground Neutrino Detector (DUNE).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Improving Predictive Capability in REHEDS Simulations with Fast, Accurate, and Consistent Non-Equilibrium Material Properties

Predictive design of REHEDS experiments with radiation-hydrodynamic simulations requires knowledge of material properties (e.g. equations of state (EOS), transport coefficients, and radiation physics). Interpreting experimental results requires accurate models of diagnostic observables (e.g. detailed emission, absorption, and scattering spectra). In conditions of Local Thermodynamic Equilibrium (LTE), these material properties and observables can be pre-computed with relatively high accuracy and subsequently tabulated on simple temperature-density grids for fast look-up by simulations. When radiation and electron temperatures fall out of equilibrium, however, non-LTE effects can profoundly change material properties and diagnostic signatures. Accurately and efficiently incorporating these non-LTE effects has been a longstanding challenge for simulations. At present, most simulations include non-LTE effects by invoking highly simplified inline models. These inline non-LTE models are both much slower than table look-up and significantly less accurate than the detailed models used to populate LTE tables and diagnose experimental data through post-processing or inversion. Because inline non-LTE models are slow, designers avoid them whenever possible, which leads to known inaccuracies from using tabular LTE. Because inline models are simple, they are inconsistent with tabular data from detailed models, leading to ill-known inaccuracies, and they cannot generate detailed synthetic diagnostics suitable for direct comparisons with experimental data. This project addresses the challenge of generating and utilizing efficient, accurate, and consistent non-equilibrium material data along three complementary but relatively independent research lines. First, we have developed a relatively fast and accurate non-LTE average-atom model based on density functional theory (DFT) that provides a complete set of EOS, transport, and radiative data, and have rigorously tested it against more sophisticated first-principles multi-atom DFT models, including time-dependent DFT. Next, we have developed a tabular scheme and interpolation methods that compactly capture non-LTE effects for use in simulations and have implemented these tables in the GORGON magneto-hydrodynamic (MHD) code. Finally, we have developed post-processing tools that use detailed tabulated non-LTE data to directly predict experimental observables from simulation output.

36 MATERIALS SCIENCE↗

Understanding the EMC effect with tagged DIS measurements

Understanding the modification of quarks in nucleons within nuclei (EMC effect) is a longstanding open question in nuclear physics. Recent experimental results from electron scattering at Jefferson Lab strengthen the correlation between the EMC effect and short- range correlated pairs (SRC) of nucleons in nuclei. That means that the EMC effect is probably driven by the high-momentum highly-virtual nucleons of the SRC pairs. This connection can be tested experimentally by measuring electron deep inelastic scattering from a nucleon and detecting its correlated SRC partner nucleon (tagging). This allows us to measure the quark modification of high-momentum nucleons. Two tagged experiments on deuterium are underway at Jefferson Lab of which one already took data and the other will take data in the upcoming years. In my talk, I will present the current knowledge of the EMC effect and its correlation to SRC pair and the status of the tagged measurements at Jefferson Lab.

Hauenstein, Florian↗

Multi-threaded Event Reconstruction with JANA

JANA2 is a multi-threaded event reconstruction framework being developed for Experimental Nuclear Physics. It is an LDRD funded project that will be the successor of the original JANA framework. JANA2 is a near complete rewrite emphasizing C++ language features that have only become available since the C++11 standard. features such as shared pointers, language native threading, and atomics. This paper outlines the status of the project.

Lawrence, David↗

Understanding the EMC effect with tagged DIS measurements

Understanding the modification of quarks in nucleons within nuclei (EMC effect) is a longstanding open question in nuclear physics. Recent experimental results from electron scattering at Jefferson Lab strengthen the correlation between the EMC effect and short- range correlated pairs (SRC) of nucleons in nuclei. That means that the EMC effect is probably driven by the high-momentum highly-virtual nucleons of the SRC pairs. This connection can be tested experimentally by measuring electron deep inelastic scattering from a nucleon and detecting its correlated SRC partner nucleon (tagging). This allows us to measure the quark modification of high-momentum nucleons. Two tagged experiments on deuterium are underway at Jefferson Lab of which one already took data and the other will take data in the upcoming years. In my talk, I will present the current knowledge of the EMC effect and its correlation to SRC pairs, the status of the tagged measurements at Jefferson Lab, and simulation results for tagged measurements at the EIC.

Hauenstein, Florian↗

Search for CP-violating Neutrino Non-Standard Interactions with the NOvA Experiment

The phenomenon of neutrino oscillations is the most significant evidence in experimental particle physics that points to the existence of Physics Beyond the Standard Model, and it opened a window for several and interesting new investigations in the field of neutrino physics. Among the possibilities, Non-Standard Interactions (NSI) are an extension of the neutrino matter effect leading to a rich phenomenology. These NSI are expected to modify the propagation of neutrinos through matter. The current open questions in the neutrino oscillation model rely heavily on how neutrinos interact with matter, and NSI could induce possible effects. This talk reports the preliminary search for CP-violating NSI of neutrinos with matter at the NOvA Experiment. Data from $\nu_{\mu}(\bar{\nu}_{\mu})\rightarrow\nu_{\mu}(\bar{\nu}_{\mu})$ and $\nu_{\mu}(\bar{\nu}_{\mu})\rightarrow\nu_{e}(\bar{\nu}_{e})$ oscillation channels are used to measure the effect of the NSI parameters $\varepsilon_{e\mu}$ or $\v arepsilon_{e\tau}$ over the 810 km baseline of the experiment.

43 PARTICLE ACCELERATORS↗

Progress of the CHILLAX Experiment (HEPCAT Year 1 Report)

A significant facet of modern experimental particle physics research is that of searching for hypothetical rare events. In this context, “rare” means “unusual to detect in the laboratory”, and can be a confirmed phenomenon (e.g. coherent elastic neutrino-nucleus scattering, which has a high cross section at low, difficult to detect energies), or an as-of-yet unobserved phenomenon that may not exist (e.g. dark matter - standard model matter non-gravitational interaction). A salient challenge for experimentalists is to devise detectors optimized for observing such rare events.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Toward a long-lifetime polarized photoelectron gun for the Ce+BAF positron source

The addition of spin-polarized, continuous-wave (c.w.) positron beams to the 12 GeV Continuous Electron Beam Accelerator Facility (CEBAF) would provide a significant capability to the experimental nuclear physics program at Jefferson Lab. Based on bremsstrahlung and pair-production in a high-Z target, the positron source requires a 120 MeV spin-polarized c.w. electron beam of several milliamperes. While the beam dynamics of the high-current electron beam are tenable, sustaining this current for weeks of user operations requires an unprecedented charge lifetime from a high-polarization GaAs-based photocathode. A promising approach to exceed the kilocoulomb charge lifetime barrier is reducing the ion back-bombardment fluence at the photocathode. By increasing the laser size and managing the emittance growth with an adequate cathode/anode design, significantly enhanced charge lifetime may be achieved. Based upon a new simulation model that qualitatively explains the lifetime data previously measured at different spot sizes, we describe the practical implications on the parameter space available for a kilocoulomb-lifetime polarized photogun design.

Bruker, M.↗

Flexible Pilot Jobs Framework for Distributed High Throughput Computing

Experimental particle physics has been at the forefront of analyzing the world’s largest datasets for decades. The high-energy physics (HEP) community was among the first to develop suitable software and computing tools for this purpose. GlideinWMS is a Glidein-based workload management system whose purpose is to provide experiments like CMS at CERN, DUNE at Fermilab, and others, a way to access and efficiently use vast amounts of computing resources. This system wants to provide a simple way to submit jobs to a set of computing resources, that will be provided to users behind the scenes. Glideins are the pilot jobs executed on the worker nodes at the grid sites, performing operations such as hardware detection, environment setup, and error handling. After all these operations, they will launch the actual user job. Many grid sites are supported, such as shared clusters, Google CE, and AWS. My internship aimed to design and code a flexible pilot jobs framework that will replace the one used by GlideinWMS, developing a modular and flexible skeleton of the Glidein and adding further functionalities. My project also focused on the application of machine learning techniques as support to this management system.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Advancements in High-Q development for novel medium-velocity 644 MHz 5-cell elliptical superconducting RF cavities for continuous-wave operation in heavy-ion linacs

The Facility for Rare Isotope Beams is a world-leading center for experimental nuclear physics research, and relies on a first-in-kind superconducting RF driver linac to supply 400 kW beams of a uniquely large range of particles, from protons through the heaviest uranium ions. The FRIB400 project proposes to double the end energy of the current superconducting FRIB linac for the heaviest uranium ions from 200 MeV per nucleon (MeV/u) to 400 MeV/u, which equates to approximately 1 GeV for protons. The increased rare isotope production from higher-energy drive beams would deliver new and exciting capabilities to FRIB users, which include extending the facility's reach along the neutron drip-line, greatly increasing the facility's rare isotope yield, and significantly improving the precision of parameter measurements for the nuclear matter equation of state, which is a particularly timely complement to the recent advent of multi-messenger astronomy, and the study of neutron star mergers. The unique set of design parameters defined by the 400 MeV/u (uranium) energy goal, the physical size, continuous-wave operation, and cryogenic capacity of the extant facilities at FRIB, requires development of a first-in-kind beta = v/c = 0.65, 644 MHz 5-cell elliptical superconducting RF (SRF) cavity, with field-leading efficiency, measured by the cavity's intrinsic quality factor, Q_0. The field of SRF has recently experienced a very active period of development, which demonstrated the potential to raise the Q_0 of 1.3 GHz cavities by factors of two to three or more. In addition to uncovering fascinating new properties of the fundamental physics of superconducting RF phenomena, these improvements suggest substantial improvements could be made over the minimum Q_0 of the proposed FRIB400 upgrade SRF cavities, if these new techniques can be adapted to the beta = 0.65, 644 MHz regime. This work presents the first validation of the the novel beta = 0.65, 644 MHz 5-cell elliptical superconducting RF cavity design, and the first results of both conventional and advanced RF surface preparation techniques. In particular, this work focuses on two recently-developed high-Q_0 recipes: N-doping, and furnace baking, setting the current world-record Q_0 for this type of resonant cavity at 3.8 x 10^10 at the FRIB400 operating gradient of 17.5 MV/m. We also find evidence that these results may be further improved upon, and make the case for further RF surface preparation recipe optimization. We then pair these high-power RF investigations with techniques borrowed from material science to try to better understand the ways in which specific properties of the niobium material, such as grain structure and superconducting flux pinning force, can be related to its superconducting RF performance. These experiments better elucidate the effects of high-temperature annealing on niobium samples, which suggest methods of further optimizing cavity flux expulsion and thus SRF performance.Read

McGee, Kellen E.↗