Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Entry Systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Effect of reaction control system jet-flow field interactions on a 0.015 scale model space shuttle orbiter aerodynamic characteristics

The effects of the reaction control system (RCS) jet-flow field interactions on the space shuttle orbiter system during entry are discussed. The primary objective of the test program was to obtain data for the shuttle orbiter configuration to determine control amplification factors resulting from jet interaction between the RCS plumes and the external flow over the vehicle. A secondary objective was to provide data for comparison and improvement of analytic jet interaction prediction techniques. The test program was divided into two phases; (1) force and moment measurements were made with and without RCS blowing, investigating environment parameters (R sub e, Alpha, Beta), RCS plume parameters (Jet pressure ratio, momentum ratio and thrust level), and geometry parameters (RCS pod locations) on the orbiter model, (2) oil flow visualization tests were conducted on a dummy balance at the end of the test.

Monta, W. J.↗
NASA NTRS1975

Apollo experience report: Guidance and control systems: Command and service module entry monitor subsystem

The conceptual aspects of the command and service module entry monitor subsystem, together with an interpretation of the displays and their associated relationship to entry trajectory control, are presented. The entry monitor subsystem is described, and the problems encountered during the developmental phase and the first five manned Apollo flights are discussed in conjunction with the design improvements implemented.

Reina, B., Jr.↗
NASA NTRS1978

Shuttle orbital flight test

The initial orbital flight of the shuttle vehicle will involve several operational aspects which differ from previous manned space programs. The asymmetrical shuttle launch configuration undergoes unique aero and thrust loads. The orbiter requires a complex interactive control system during entry. Techniques are described which will be used to minimize the ascent loads. Procedures are outlined which should maximize the entry control margins. The primary objective of the first shuttle flight is to obtain data from which to extract the loads and stability derivatives. Accomplishment of this objective will enable relaxation of constraints on launch winds, entry center of gravity, and crossrange during subsequent flights.

North, W. J.↗
NASA NTRS1983

Space Shuttle Orbiter Venting: Lessons Learned

The orbiter vent system provides dedicated vent areas to permit the gases trapped inside the vehicle to escape during accent. The same vent system also repressurizes the vehicle during entry. The vent system is one of six systems that constitutes the purge, vent and drain subsystem. The orbiter active vent system has been very adaptable to the changing requirements that have occurred during the development of the Space Shuttle orbiter. Good correlation has been obtained between predicted and measured compartment pressures during the orbital flight test (OFT) program. An investigation of the flight data showed that the difference between preflight prediction and the measured values were primarily due to the difference between the baseline external pressures, which was based on subscale wind tunnel test data, and the actual vehicle local external pressures measured during the flight. The current predictions are based on flight derived vent port pressure coefficients since the wind tunnel data does not adequately define the orbiter ascent pressure environment.

H S Lutfi↗
NASA NTRS1986

Independent Orbiter Assessment (IOA): Analysis of the rudder/speed brake subsystem

The results of the Independent Orbiter Assessment (IOA) of the Failure Modes and Effects Analysis (FMEA) and Critical Items List (CIL) are presented. The IOA approach features a top-down analysis of the hardware to determine failure modes, criticality, and potential critical items. To preserve independence, this analysis was accomplished without reliance upon the results contained within the NASA FMEA/CIL documentation. The independent analysis results for the Orbiter Rudder/Speedbrake Actuation Mechanism is documented. The function of the Rudder/Speedbrake (RSB) is to provide directional control and to provide a means of energy control during entry. The system consists of two panels on a vertical hinge mounted on the aft part of the vertical stabilizer. These two panels move together to form a rudder but split apart to make a speedbrake. The Rudder/Speedbrake Actuation Mechanism consists of the following elements: (1) Power Drive Unit (PDU) which is composed of hydraulic valve module and a hydraulic motor-powered gearbox which contains differentials and mixer gears to provide PDU torque output; (2) four geared rotary actuators which apply the PDU generated torque to the rudder/speedbrake panels; and (3) ten torque shafts which join the PDU to the rotary actuators and interconnect the four rotary actuators. Each level of hardware was evaluated and analyzed for possible failures and causes. Criticality was assigned based upon the severity of the effect for each failure mode. Critical RSB failures which result in potential loss of vehicle control were mainly due to loss of hydraulic fluid, fluid contaminators, and mechanical failures in gears and shafts.

Wilson, R. E.↗
NASA NTRS1992

Prediction of ice accretion on a swept NACA 0012 airfoil and comparisons to flight test results

In the winter of 1989-90, an icing research flight project was conducted to obtain swept wing ice accretion data. Utilizing the NASA Lewis Research Center's DHC-6 DeHavilland Twin Otter aircraft, research flights were made into known icing conditions in Northeastern Ohio. The icing cloud environment and aircraft flight data were measured and recorded by an onboard data acquisition system. Upon entry into the icing environment, a 24 inch span, 15 inch chord NACA 0012 airfoil was extended from the aircraft and set to the desired sweep angle. After the growth of a well defined ice shape, the airfoil was retracted into the aircraft cabin for ice shape documentation. The ice accretions were recorded by ice tracings and photographs. Ice accretions were mostly of the glaze type and exhibited scalloping. The ice was accreted at sweep angles of 0, 30, and 45 degrees. A 3-D ice accretion prediction code was used to predict ice profiles for five selected flight test runs, which include sweep angle of zero, 30, and 45 degrees. The code's roughness input parameter was adjusted for best agreement. A simple procedure was added to the code to account for 3-D ice scalloping effects. The predicted ice profiles are compared to their respective flight test counterparts. This is the first attempt to predict ice profiles on swept wings with significant scalloped ice formations.

Reehorst, Andrew L.↗
NASA NTRS1992

Prediction of ice accretion on a swept NACA 0012 airfoil and comparisons to flight test results

In the winter of 1989-90, an icing research flight project was conducted to obtain swept wing ice accretion data. Utilizing the NASA Lewis Research Center's DHC-6 DeHavilland Twin Otter aircraft, research flights were made into known icing conditions in Northeastern Ohio. The icing cloud environment and aircraft flight data were measured and recorded by an onboard data acquisition system. Upon entry into the icing environment, a 24 inch span, 15 inch chord NACA 0012 airfoil was extended from the aircraft and set to the desired sweep angle. After the growth of a well defined ice shape, the airfoil was retracted into the aircraft cabin for ice shape documentation. The ice accretions were recorded by ice tracings and photographs. Ice accretions were mostly of the glaze type and exhibited scalloping. The ice was accreted at sweep angles of 0, 30, and 45 degrees. A 3-D ice accretion prediction code was used to predict ice profiles for five selected flight test runs, which include sweep angle of zero, 30, and 45 degrees. The code's roughness input parameter was adjusted for best agreement. A simple procedure was added to the code to account for 3-D ice scalloping effects. The predicted ice profiles are compared to their respective flight test counterparts. This is the first attempt to predict ice profiles on swept wings with significant scalloped ice formations.

Reehorst, Andrew L.↗
NASA NTRS1992

Neptune atmospheric probe mission

A feasibility study of a 'Galileo-like' atmospheric probe mission to Neptune aimed at obtaining in situ measurements of atmospheric and cloud composition and structure is presented. The main scientific desire is to obtain in situ measurements down to a pressure level of 75-100 bars to completely penetrate the CH4, NH3, H2S, NH4SH, and H2O clouds. The probe mission should be based on a Galileo complement of instruments with the addition of a gas chromatograph. Particular attention is given to the deployment design, and operation of the atmospheric entry probe system to accomplish the above mission objective.

Swenson, Byron L.↗
NASA NTRS1998

STS-88 Day 12 Highlights

On this twelth day of the STS-88 mission, the flight crew, Commander Robert D. Cabana, Pilot Frederick W. Sturckow, and Mission Specialists Nancy J. Currie, James H. Newman, Jerry L. Ross, and Sergei Krikalev are awakened by the sounds of James Brown's "I Got You (I Feel Good)". Crew members focus their activities today on preparing for their scheduled return to the Kennedy Space Center. Cabana and Sturckow spend a good part of the day checking out spacecraft systems for entry and landing.

Source record↗
NASA NTRS1995

Exopaleontology at The Pathfinder Landing Site

The Mars Pathfinder Mission is a Discovery Class mission that will place a small lander and rover on the surface of Mars in July of 1997. It is primarily a technology demonstration to test the feasibility of a direct entry-delivery system, but carries a nominal scientific payload that includes rover-lander and instrumentation for limited mineralogical analysis. The nominal landing site was selected by the Pathfinder Team under the leadership of Dr. Matthew Golombek (JPL) based input from 60 participants at a Landing Site Workshop held last Spring at the Lunar Planetary Institute in Houston. The mission constraints for the landing site were 0-30 deg. N latitude, and below the 0.0 elevation datum. Over 20 landing sites were proposed and a nominal site was selected on southern Chryse Planitia near the terminae of the Ares and Tui outflow channels. In part, the decision to land at this location was based on the opportunity to sample a potentially large number lithologies in a small area (the rover will have a range of a few tens of meters from the lander). The purpose here is to review the general geological context of the landing site and the rationale for Exobiology's recommendation of the Ares site given at the workshop last spring. Because Ares and Tui Valles are sourced within terranes that may have originated by thermokarst processes, hydrothermal processes could have operated there for some time. Hydrothermal systems are presently regarded as important sites for a fossil record on Mars. Models for the formation of the outflow channels suggest that thermal spring sinters and associated aqueous mineral deposits, high priority targets for Mars Exopaleontology, could have formed in association with thermokarst processes and subsequently been delivered to the landing site in large quantities during the periodic cataclysmic outflows that created the channels.

Farmer, Jack D.↗
NASA NTRS2006

Visualization of a Capsule Entry Vehicle Reaction-Control System (RCS) Thruster

Planar laser-induced fluorescence (PLIF) was used to visualize the reaction control system (RCS) jet flow emanating from the aft-body of an Apollo-geometry capsule test article in the NASA Langley Research Center 31-Inch Mach 10 Air wind tunnel. The RCS jet was oriented normal to the aft surface of the model and had a nominal Mach number of 2.94. The composition of the jet gas by mass was 95% nitrogen (N2) and 5% nitric oxide (NO). The RCS jet flowrate varied between zero and 0.5 standard liters per minute and the angle of attack and tunnel stagnation pressure were also varied. PLIF was used to excite the NO molecules for flow visualization. These flow visualization images were processed to determine the trajectory and to quantify the flapping of the RCS jet. The spatial resolution of the jet trajectory measurement was about 1 mm and the single-shot precision of the measurement was estimated to be 0.02 mm in the far field of the jet plume. The jet flapping, measured by the standard deviation of the jet centerline position was as large as 0.9 mm, while the jet was 1.5-4 mm in diameter (full width at half maximum). Schlieren flow visualization images were obtained for comparison with the PLIF. Surface pressures were also measured and presented. Virtual Diagnostics Interface (VIDI) technology developed at NASA Langley was used to superimpose and visualize the data sets. The measurements demonstrate some of the capabilities of the PLIF method while providing a test case for computational fluid dynamics (CFD) validation.

Danehy, P. M.↗
NASA NTRS2011

An Interim Report on NASA's Draft Space Technology Roadmaps

NASA has developed a set of 14 draft roadmaps to guide the development of space technologies under the leadership of the NASA Office of the Chief Technologist (OCT). Each of these roadmaps focuses on a particular technology area (TA). The roadmaps are intended to foster the development of advanced technologies and concepts that address NASA's needs and contribute to other aerospace and national needs. OCT requested that the National Research Council conduct a study to review the draft roadmaps, gather and assess relevant community input, and make recommendations and suggest priorities to inform NASA's decisions as it finalizes its roadmaps. The statement of task states that "based on the results of the community input and its own deliberations, the steering committee will prepare a brief interim report that addresses high-level issues associated with the roadmaps, such as the advisability of modifying the number or technical focus of the draft NASA roadmaps." This interim report, which does not include formal recommendations, addresses that one element of the study charge. NASA requested this interim report so that it would have the opportunity to make an early start in modifying the draft roadmaps based on feedback from the panels and steering committee. The final report will address all other tasks in the statement of task. In particular, the final report will include a prioritization of technologies, will describe in detail the prioritization process and criteria, and will include specific recommendations on a variety of topics, including many of the topics mentioned in this interim report. In developing both this interim report and the final report to come, the steering committee draws on the work of six study panels organized by technical area, loosely following the organization of the 14 roadmaps, as follows: A Panel 1: Propulsion and Power TA01 Launch Propulsion Systems TA02 In-Space Propulsion Technologies TA03 Space Power and Energy Storage Systems TA13 Ground and Launch Systems Processing B Panel 2: Robotics, Communications, and Navigation TA04 Robotics, TeleRobotics, and Autonomous Systems TA05 Communication and Navigation Systems C Panel 3: Instruments and Computing TA08 Science Instruments, Observatories, and Sensor Systems TA11 Modeling, Simulation, Information Technology, and Data Processing D Panel 4: Human Health and Surface Exploration TA06 Human Health, Life Support, and Habitation Systems TA07 Human Exploration Destination Systems E Panel 5: Materials Panel TA10 Nanotechnology TA12 Materials, Structures, Mechanical Systems, and Manufacturing TA14 Thermal Management Systems F Panel 6: Entry, Descent, and Landing Panel TA09 Entry, Descent, and Landing Systems In addition to drawing on the expertise represented on the steering committee and panels, the committee obtained input from each of 14 public workshops held on each of the 14 roadmaps. At these 1-day workshops, invited speakers, guests, and members of the public engaged in discussions on the different technology areas and their value to NASA. Broad community input was also solicited from a public website, where more than 240 public comments were received on the draft roadmaps in response to application of criteria (such as benefit, risk and reasonableness, and alignment with NASA and national goals) that the steering committee established. This interim report reflects the results of deliberations by the steering committee in light of these public inputs as well as additional inputs from the six panels. The steering committee's final report will be completed early in 2012. That report will prioritize the technologies that span the entire scope of the 14 roadmaps and provide additional guidance on crosscutting themes and other relevant topics.

Source record↗
NASA NTRS2014

Mary Poppin's Approach to Human Mars Mission Entry, Descent and Landing

This is a talk on Human Mars Mission Challenges and the effort that is on-going at NASA ARC. The presentation will be used as part of the talk I will give at Purdue University on 8th April, 2016. This talk is based on the Director's colloquium I gave in 2014 at Ames, as part of the Center Director's Colloquium Series of the 75th Anniversary of Ames. Few additional charts have been added and these were from presentation made by Brandon Smith at the IEEE Aerospace Sciences 2016 meeting in Big Sky Montana, March, 2016.

Deploayble↗
NASA NTRS2016

PICA Status: New Frontiers and Discovery Missions

This is a set of slides for a 2 min talk at the OPAG meeting to update the community on the current status of PICA and future needs. The current vendor for manufacturing rayon for the heritage PICA has discontinued the production and as a result, the community needs to be aware of the efforts underway to consider options and demonstrate manufacturing as well as obtain properties and thermal response model of an alternate rayon based PICA that is sustainable for missions in support of upcoming New Frontiers and future Discovery Missions of Opportunity.

Thermal Protection System↗
NASA NTRS2015

Status of Shock Layer Radiation Validation Studies

This paper presents a status update for the shock layer radiation validation studies conducted at NASA. A review of the present capability for the simulation and validation of shock layer radiation is presented as well as providing an overview of the data obtained from the Electric Arc Shock Tube (EAST). The paper will include details covering updated convective and radiative heating correlations, provide an overview of the development of new kinetics for Mars entry and detail some recent work calculating after-body radiation. Furthermore, the paper will highlight conditions where there is high confidence in the validation of EAST data (e.g. Earth entry for speeds greater than approximately 10 kms and for many Mars entry conditions) and where further experimental data would be highly beneficial (e.g. lower speed Earth entry around 7.5 to 10 kms and higher speed CO2 entries relevant to Venus). Nominal test conditions for both Earth and Mars are provided for future potential facility-to-facility comparisons.

Entry systems modeling↗