Magnetically launched flyer plate technique for probing electrical conductivity of compressed copper
Not Available
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not Available
Plate-like crystals of the polyvanadate (H{sub 3}N(CH{sub 2}){sub 4}NH{sub 3})[V{sub 6}O{sub 14}] have been synthesized via an hydrothermal treatment. X-ray powder diffraction, scanning electron microscope, Fourier transform infrared spectroscopy, electron spin resonance and complex impedance spectroscopy were used to analyze the hybrid material. The frequency dependence of AC conductivity at different temperatures indicates that the CBH model is the probable mechanism for the AC conduction behavior. The conductivity was measured by complex impedance spectroscopy which is equal to 31.10{sup -3} {Omega}{sup -1} m{sup -1} at 443 K. The Arrhenius diagram is not linear, it presents a rupture situated at 357 K and the activation energies' average values are 0.22 eV and 0.14 eV, deduced from the Arrhenius relation. - Graphical abstract: At high temperature {epsilon} Double-Prime increases more rapidly which is due to the increasing conduction loss which rises with the increment in the DC conductivity. Highlights: Black-Right-Pointing-Pointer Rectangular plate-like crystals (H{sub 3}N(CH{sub 2}){sub 4}NH{sub 3})[V{sub 6}O{sub 14}] were synthesized. Black-Right-Pointing-Pointer frequency and temperature dependence of AC conductivity indicate CBH model. Black-Right-Pointing-Pointer The temperature dependence of DC conductivity exhibits two conduction mechanisms.
Highlights: Black-Right-Pointing-Pointer Ac conductivity measurements and its analysis has been performed on Bi{sub 2}O{sub 3}-Li{sub 2}O-ZnO-B{sub 2}O{sub 3} glasses in the temperature range 30-300 Degree-Sign C and a frequency range of 100 Hz to 1 MHz. Black-Right-Pointing-Pointer The dc conductivity increased and the activation energy decreased with lithium content. Black-Right-Pointing-Pointer The frequency dependent conductivity has been analyzed employing conductivity and modulus formalisms. Black-Right-Pointing-Pointer The onset of conductivity relaxation shifts towards higher frequencies with temperature. Black-Right-Pointing-Pointer The Almond-West conductivity formalism is used to explain the scaling behavior, and the relaxation mechanism is independent of temperature. -- Abstract: Ac conductivity measurements and its analysis has been performed on xBi{sub 2}O{sub 3}-(65-x)Li{sub 2}O-20ZnO-15B{sub 2}O{sub 3} (0 {<=} x {<=} 20) glasses in the temperature range 30-300 Degree-Sign C and a frequency range of 100 Hz to 1 MHz. The dc conductivity increased and the activation energy decreased with lithium content. The frequency dependent conductivity has been analyzed employing conductivity and modulus formalisms. The onset of conductivity relaxation shifts towards higher frequencies with temperature. The Almond-West conductivity formalism is used to explain the scaling behavior, and the relaxation mechanism is independent of temperature.
Conductivity of potassium-seeded argon plasma, assuming variable collision cross sections and Maxwellian distribution for electrons
Polymer nanocomposites based on metal oxide (ceramic) nanoparticles are a new class of materials with unique properties and designed for various applications such as electronic device packaging, insulation, fabrication and automotive industries. Poly(ethylene terephthalate) (PET)/alumina (Al{sub 2}O{sub 3}) nanocomposites with filler content between 1 wt% and 5 wt% were prepared by melt compounding method using co-rotating twin screw extruder and characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and precision LCR meter techniques. The results revealed that proper uniform dispersion at lower content up to 2 wt% of nano-alumina observed by using TEM. Aggregation of nanoparticles was observed at higher content of alumina examined by using SEM and TEM. The frequency dependences of the alternating current (AC) conductivity (σ{sub AC}) of PET/alumina nanocomposites on the filler content and DC bias were investigated in the frequency range of 20Hz - 1MHz. The results showed that the AC and direct current (DC) conductivity increases with increasing DC bias and nano-alumina content upto 3 wt%. It follows the Jonscher’s universal power law of solids. It revealed that σ{sub AC} of PET/alumina nanocomposites can be well characterized by the DC conductivity (σ{sub DC}), critical frequency (ω{sub c}), critical exponent of the power law (s). Roll of DC bias potential led to an increase of DC conductivity (σ{sub DC}) due to the creation of additional conducting paths with the polymer nanocomposites and percolation behavior achieved through co-continuous morphology.
A freeze-drying precursor method has been used to prepare polycrystalline materials of the new SOFC anode, Sr{sub 2}MgMoO{sub 6-{delta}}. The optimal synthesis conditions were studied in order to avoid secondary phase segregations. These materials were characterised by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), thermal analysis (TG/DTA) and scanning electron microscopy (SEM). The as-synthesised polycrystalline powders showed homogeneous particle size distribution in the submicrometric range. The stability studies demonstrated that this phase is stable up to 1200 deg. C under 5% H{sub 2}-Ar. In addition, impedance spectroscopy was used to determine the conductivity of ceramic pellets prepared under oxidising and reducing atmosphere. Samples sintered in reducing atmosphere exhibit higher conductivity values than those prepared in air.
The current–voltage characteristics of TlInSe{sub 2} crystals under photoexcitation and X-ray excitation are studied. The parameters of the trap, which are equal to N{sub t} = 5 × 10{sup 16} cm{sup –3}, n{sub t} = 4.5 × 10{sup 12} cm{sup –3}, and ΔE{sub t} = 0.42 eV, are calculated. The calculated values of N{sub t} and n{sub t} before and after X-ray excitation are equal to 3 × 10{sup 16} cm{sup –3} and 3.2 × 10{sup 12} cm{sup –3}, respectively. The dependences of the X-ray conductances on the radiation intensity are studied for TlInSe{sub 2} crystals at various accelerating voltages V{sub a} and it is determined that the X-ray conductance K{sub σ} decreases exponentially as the accelerating voltage V{sub a} and radiation dose increase.
Not Available
New La-deficient double perovskites with P2{sub 1}/n symmetry, La{sub ∼1.90}(Co{sup 2+}{sub 1−x}Mg{sup 2+}{sub x})(Co{sup 3+}{sub 1/3}Nb{sup 5+}{sub 2/3})O{sub 6} with x=0, 0.13 and 0.33, and La{sub 2}(Co{sup 2+}{sub 1/2}Mg{sup 2+}{sub 1/2}) (Co{sup 3+}{sub 1/2}Nb{sup 5+}{sub 1/2})O{sub 6} were prepared by solid state reaction at 1450 °C. Their crystal structures were refined using time-of-flight neutron powder diffraction data. Our results show that certain cations such as Nb{sup 5+}, with very strong B–O bonds in the perovskite structure, can induce A-site vacancies in double perovskites. Upon heating in N{sub 2} gas atmosphere at 1200 °C ∼1% O atom vacancies are formed together with a partial reduction of the Co{sup 3+} content. The average thermal expansion coefficient between 25 and 900 °C of La{sub 1.90}(Co{sup 2+}{sub 2/3}Mg{sup 2+}{sub 1/3})(Co{sup 3+}{sub 1/3}Nb{sup 5+}{sub 2/3})O{sub 6} was determined to be 17.4 ppm K{sup −1}. Four-point electronic conductivity measurements showed that the compounds are semiconductors, with conductivities varying between 3.7·10{sup −2} and 7.7·10{sup −2} S cm{sup −1} at 600 °C and activation energies between 0.77 and 0.81 eV. Partial replacement of La{sup 3+} with Sr{sup 2+} does not lead to any increase of conductivity, while replacement of Mg{sup 2+} with Cu{sup 2+} in La{sub 1.9}CoCu{sub 1/3}Nb{sub 2/3}O{sub 6} and La{sub 1.8}CoCu{sub 1/2}Nb{sub 1/2}O{sub 6} leads to ∼100 times larger conductivities at 600 °C, 0.35 and 1.0 S cm{sup −1}, respectively, and lower activation energies, 0.57 and 0.73 eV, respectively. - Highlights: • Double perovskites, P2{sub 1}/n, La{sub 2−z}(Co{sup 2+}{sub 1−x}Mg{sup 2+}{sub x})(Co{sup 3+}{sub 1/3}Nb{sup 5+}{sub 2/3})O{sub 6} have been synthesized. • Crystal structures have been refined using neutron powder diffraction data. • Strong Nb–O bond and size ordering of Mg{sup 2+}/Co{sup 2+} and Nb{sup 5+}/Co{sup ~3+} leads to La-deficiency. • The compounds are semi conductors (~10{sup −2} S cm{sup −1}) at 600 °C. • Replacement of Mg{sup 2+} with Cu{sup 2+} leads to higher conductivity (~1.0 S cm{sup −1}) at 600 °C.
In recent years, the development of inert anode materials has gained considerable attention because such materials are capable of producing only environment-friendly O{sub 2} and saving energy during aluminum electrolysis. Nickel ferrite was prepared by a solid-state reaction as the inert anode in this study and its microstructures and direct current conductivities were analyzed in detail regarding the effects of different sintering atmospheres. A single-phase spinel structure was confirmed for all samples by X-ray powder diffraction. The grain sizes and the relative densities of the samples sintered in nitrogen increased by over 7 {mu}m and 10.8%, respectively, compared to those sintered in air. The direct current conductivities of the samples sintered in nitrogen showed a drastic increase compared to those sintered in air, believed to be due to the effects of increased Fe{sup 2+} ion concentration at octahedral sites and the increase of the relative density.
Conductivity in Fe{sub 7}Pd{sub 3} is characterized by an anomalous increase when traversing the face–centered–cubic (fcc) austenite to face–centered–tetragonal (fct) martensite transition, contrary to most other conventional and ferromagnetic shape memory alloys. Experiments on molecular– beam–epitaxy–grown single crystals indicate a resistivity change of ≈20% during the transformation on top of a quadratic temperature dependence reaching up to room temperature. The physical foundations of residual resistivity changes along the full Bain path are addressed by a Kubo– Greenwood approach within the framework of density functional theory. To do so, a concept to reliably extract the DC conductivities is proposed that yields reproducible results consistent with experiments. Finding that conductivity peaks in the fct phase, we identify a large density of states paired with high velocities at the Fermi level in the majority spin sub–bands in presence of minimum s–d electron scattering as underlying physical origin.
We have synthesized samples based on the layered compound TlGaSe{sub 2} and containing thulium: (1–x)TlGaSe{sub 2} · xTm with x = 0.001, 0.005, 0.01, and 0.02. The polycrystalline samples have been used as charges for growing crystals with the corresponding compositions by the Bridgman method. The phase composition of the (1–x)TlGaSe{sub 2} · xTm samples has been determined by X-ray diffraction analysis. Their dielectric properties have been studied in ac electric fields at frequencies in the range f = 5 × 10{sup 4} to 3.5 × 10{sup 7} Hz. We have identified the relaxation character of the dielectric permittivity, the nature of the dielectric loss, and the hopping mechanism of charge transport in the (1–x)TlGaSe{sub 2} · xTm crystals. Our results demonstrate that increasing the thulium concentration in the crystals reduces the mean hop distance and time of charge carriers and increases the ac conductivity and the density of localized states near the Fermi level in the crystals.
Topological defects in ferroic materials are attracting much attention both as a playground of unique physical phenomena and for potential applications in reconfigurable electronic devices. Here, we explore electronic transport at artificially created ferroelectric vortices in BiFeO{sub 3} thin films. The creation of one-dimensional conductive channels activated at voltages as low as 1 V is demonstrated. We study the electronic as well as the static and dynamic polarization structure of several topological defects using a combination of first-principles and phase-field modelling. The modelling predicts that the core structure can undergo a reversible transformation into a metastable twist structure, extending charged domain walls segments through the film thickness. The vortex core is therefore a dynamic conductor controlled by the coupled response of polarization and electron-mobile-vacancy subsystems with external bias. This controlled creation of conductive one-dimensional channels suggests a pathway for the design and implementation of integrated oxide electronic devices based on domain patterning.
The conductivity of a neodymium-based arti ficial honeycomb lattice undergoes dramatic changes upon application of magnetic fi elds and currents. We attribute these changes to a redistribution of magnetic charges that are formed at the vertices of the honeycomb due to the nonvanishing net flux of magnetization from adjacent magnetic elements. We suggest that the application of a large magnetic fi eld or a current causes a transition from a disordered state, in which magnetic charges are distributed at random, to an ordered state, in which they are regularly arranged on the sites of two interpenetrating triangular Wigner crystals. The field and current tuning of electrical properties are greatly desirable functionalities for spintronics applications. As a result, a new spintronics research platform can be envisaged in arti cial magnetic honeycomb lattice.
The radiation-induced conductivity of a nanocomposite with the inclusion of spherical nanoparticles as a function of intensity and time of action of gamma-radiation and the concentration and size of inclusions has been studied using the Rose–Fowler–Weisberg model. The energy spectrum of localized states associated with the nanoparticle inclusion has been determined. The numerical experiments have been made for polymethyl methacrylate (PMMA) nanocomposites with inclusion of CdS and α-Al{sub 2}O{sub 3} nanoparticles as well as SrO nanoparticles.
Multiferroic xBa{sub 0.95}Sr{sub 0.05}TiO{sub 3}-(1-x)BiFe{sub 0.90}Gd{sub 0.10}O{sub 3} [xBST-(1-x)BFGO] (x = 0.00, 0.10 and 0.20) ceramics were prepared by the standard solid-state reaction technique. Crystal structure of the ceramics was determined by X-ray diffraction pattern. All the compositions exhibited rhombohedral crystal structure. The tolerance factor ‘t’ varied from 0.847 to 0.864. The AC conductivity spectrum followed the Jonscher’s power law. The Nyquist plots indicated that only grains have the contribution to the resistance in this material and the values of grain resistance (R{sub g}) increased with BST content. The real part of complex initial permeability decreased with the increase in frequency and increased with increasing BST content. Magnetoelectric coefficient was determined for all compositions. The maximum value of magnetoelectric coefficient was found to be 1.467 mV.cm{sup −1}.Oe{sup −1} for x = 0.20.
The properties of the Cr–p-Si potential barrier near the temperature of the antiferromagnetic–paramagnetic phase transition in chromium are investigated. A significant change in the potential barrier and an anomalous increase in the conductivity in the Cr–p-Si–Au structure are observed near the temperature of the second-order antiferromagnetic–paramagnetic phase transition in chromium. It is established that current fluctuations in the structure are enhanced when approaching the phase-transition point. The experimental results are interpreted based on the assumption that the observed change in the electron-transport properties of the Cr–Si interface is due to a shift of the Fermi quasi-level in chromium as a result of the second-order phase transition.
A generalized Ohm's law is derived to treat strongly magnetized plasmas in which the electron gyrofrequency significantly exceeds the electron plasma frequency. Here, strong magnetization of electrons causes the frictional drag between electrons and ions due to Coulomb collisions to shift, producing an additional transverse resistivity term in the generalized Ohm's law that is perpendicular to both the current ($J$) and the Hall ($JxB$) direction. In the limit of very strong magnetization the parallel resistivity is found to increase by a factor of 3/2, and the perpendicular resistivity by a factor of $\frac{3}{4} \ln (m_i/m_e)$, where $m_i$ and $m_e$ are the ion and electron masses. These results suggest that strong magnetization significantly changes the magnetohydrodynamic evolution of a plasma.