Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electric polarization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Hollow plasma structure during the breakdown phase of nanosecond pulsed pin–pin discharges generated with overvoltage

Atmospheric pressure nanosecond repetitive pulsed discharges are of interest for applications in combustion, material processing, plasma medicine and gas treatment. Here, the observation of a hollow structure at the ignition stage of such discharge in a pin–pin geometry is reported. Plasma images show that the phenomenon occurs in a variety of gases (helium, humid helium, argon and air) suggesting that it is in first approximation non-species specific. The phenomenon is investigated in detail in pure helium discharges for peak applied voltages between 3 and 6 kV and 200 ns voltage pulse duration by performing time-resolved optical emission spectroscopy measurements of electron density, gas temperature and electric field. All the measurements were performed at the mid-gap during the early stages of the discharge, near the breakdown. The transition from a homogeneous filament to a hollow structure occurs between 4 and 5 kV in helium. Electron density measurements by Stark broadening of the He I line at 492.2 nm show no significant difference in electron densities for the applied voltage between 3 and 6 kV. In all cases, a maximum electron density of about 3.5 × 10 21 m –3 was found. Electric field measurements performed by Stark polarization spectroscopy of the He I transition at 492.2 nm and of its forbidden counterpart show electric field strengths higher than the DC breakdown field of helium at atmospheric pressure consistent with the generation of the discharges with overvoltage. Moreover, a correlation between electric field values and the appearance of the hollow structure is observed and, remarkably, the phenomenon is not sensitive to the pre-ionization level (memory effect). Possible mechanisms for the phenomenon are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1975

Rocket-borne particle, field, and plasma observations in the cleft region

Results are reported for comprehensive observations of magnetic and electric fields together with ambient and suprathermal plasmas above the dayside auroral oval with rocket-borne instrumentation which penetrated the cleft region. Measurements were also obtained equatorward and poleward of the cleft. Convection velocities as inferred from electric-field measurements were generally toward noon equatorward of the cleft and were antisunward over the polar cap. Observations of electron temperatures, electric fields, and low-frequency electrostatic noise provide strong evidence of a plasma instability (Farley-Buneman) in the E-layer associated with the appearance of the 'slant E condition' identified in ground-acquired ionograms. The positions of these measurements relative to that of the cleft were firmly established via the determination of the plasma environment with an electrostatic analyzer.

Ungstrup, E.↗
NASA NTRS1995

Satellite observations of zonal electric fields near sunrise in the equatorial ionosphere

We report here on a number of examples of anomalous enhancements of eastward electric fields near sunrise in the equatorial ionospheric F-region. These examples were selected from the data base of the equatorial satellite, San Marco D (1988), which measured ionospheric electric fields during a period of solar minimum. The eastward electric fields reported correspond to vertical plasma drifts. The examples studied here are similar in signature and polarity to the pre-reversal electric field enhancements seen near sunset from ground-based radar systems. The morphology of these sunrise events, which are observed on about 14% of the morning-side satellite passes, are studied as a function of local zonal velocity, magnetic activity, geographic longitude and altitude. The nine events studied occur at locations where the zonal plasma flow is generally measured to be eastward, but reducing as a function of local time and at satellite longitudes where the magnetic declination has the opposite polarity as the declination of the sunrise terminator.

Aggson, T. L.↗
DOE OSTI2025

Unconventional Spintronics from Chiral Perovskites

Spintronic devices typically employ heterostructures with ferromagnets which break time-reversal symmetry and have non-vanishing magnetization. With the growing class of materials that support spin-polarized carriers, current, and excitations, it is possible to envision emerging spintronic applications that are not limited to magnetoresistance. Here, chiral perovskites with no net magnetization are considered, where the space-inversion and mirror symmetries are broken to induce chiral structure. The known importance of these perovskites is further expanded by the demonstration of the chiral-induced spin selectivity (CISS). However, the generation of the spin-polarized carriers across the interface with these chiral perovskites remains to be fully understood. These first-principles studies for 2D PbBr4-based chiral perovskites provide their electronic structure and an orbital-based symmetry analysis, which allows to establish an effective Hamiltonian to elucidate the underlying origin of their chirality. The same analysis is used for the Edelstein effect, responsible for electrical generation of the nonequilibrium spin polarization in many materials, which in chiral perovskites can be a mechanism contributing to CISS. Furthermore, by examining optical properties of chiral perovskites and the opportunity to use them to realize tunable altermagnets, another class of zero-magnetization spintronic materials, a versatile materials platform is put forth for unconventional spintronics.

14 SOLAR ENERGY↗
DOE OSTI2023

Effects of fast and thermal neutron irradiation on Ga-polar and N-polar GaN diodes

Studies of the radiation tolerance and electrical behavior of gallium nitride (GaN) based devices are important for the next generation of high-power and high-voltage electronics that may be subjected to harsh environments such as nuclear reactor and fusion facilities, particle accelerators, and post-denotation environments. Here, in this work, we study the behavior of Ga-polar and N-polar GaN Schottky diodes before and after exposure to fast and thermal + fast neutrons. Temperature-dependent current–voltage (I–V) and circular transmission line method (CTLM) measurements were used to study the electrical characteristics. A strong reduction in reverse leakage current and an increase in differential resistance in forward bias were observed after neutron irradiation. Thermionic emission (TE), Frenkel–Poole (FP) emission, and Fowler–Nordheim (FN) tunneling models were used to explain the forward and reverse I–V characteristics pre- and post-irradiation. The study confirms that Ga-polar and N-polar GaN Schottky diodes exhibit different electrical responses to fast and thermal neutron irradiations. The reverse bias characteristics of N-polar diodes are less affected after the fast neutron irradiation compared to Ga-polar diodes, while in the forward bias region, the electrical behavior after fast and thermal neutron irradiations is similar in Ga-polar and N-polar diodes. The results indicate that the role of orientation should be considered in the design of GaN-based radiation-tolerant electronics.

42 ENGINEERING↗
DOE OSTI2020

Data for “Lightning Interferometry Uncertainty, “Focused Interferometry”, and Evidence of Lightning being Ignited by a Cosmic-ray Shower” by Shao et al.

This summarizes the data from our broadband RF interferometric mapping and polarization (BIMAP) system used to produce the figures in the revised manuscript “Lightning Interferometry Uncertainty, “Focused Interferometry”, and Evidence of Lightning being Ignited by a Cosmic-ray Shower” that was originally submitted to Journal of Geophysical Research (JGR) for publication. Note that the original manuscript was titled ““Focused Interferometry” and Fine Structure of Lightning-Initiating Fast Positive Streamers” and was released with LA-UR-19-32549. In accordance with JGR’s data policy (https://www.agu.org/Publish-withAGU/Publish/Author-Resources/Policies/Data-policy), it is the intention to make this data publicly available at the time of article submission. The data set includes raw BIMAP RF data and processed results for two lightning flashes. The data is available in two files (“FPS_data_20170606_361.sav” and “Small_IC_20180520_205644_408.sav”) located at “/home/xshao/HEPL/Analysis” which were packaged with IDL save commend. The raw data includes 3 channels of RF data, 2 channels of RF polarization data, and 1 channel of electric field change data. The processed data includes the RF source positions, source position uncertainties, and the polarization analysis.

58 GEOSCIENCES↗
NASA NTRS1982

Relationships between the Birkeland currents, ionospheric currents, and electric fields

Currents and electric fields in the ionosphere are calculated using a global model of the electron density including conjugate coupling along field lines. Incoherent scatter and rocket measurements of high-latitude electron densities are used to derive realistic variations of the polar conductivities as a function of magnetic activity. The Birkeland currents are specified in terms of three indices, and the relationship between these parameters and the auroral electrojets indices is examined along with the polar cap potential and the electric field at lower latitudes. A mathematical model of the currents, electric fields, and energy inputs produced by field aligned currents is developed, which is consistent with and specifiable in terms of measured geophysical indices.

Bleuler, E.↗
NASA NTRS1985

Three-dimensional calculation of shuttle charging in polar orbit

The charged particles environment in polar orbit can be of sufficient intensity to cause spacecraft charging. In order to gain a quantitative understanding of such effects, the Air Force is developing POLAR, a computer code which simulates in three dimensions the electrical interaction of large space vehicles with the polar ionospheric plasma. It models the physical processes of wake generation, ambient ion collection, precipitating auroral electron fluxes, and surface interactions, including secondary electron generation and backscattering, which lead to vehicle charging. These processes may be followed dynamically on a subsecond timescale so that the rapid passage through intense auroral arcs can be simulated. POLAR models the ambient plasma as isotropic Maxwellian electrons and ions (0+, H+), and allows for simultaneous precipitation of power-law, energetic Maxwellian, and accelerated Gaussian distributions of electrons. Magnetic field effects will be modeled in POLAR but are currently ignored.

Cooke, D. L.↗
NASA NTRS1988

A model for multiple throat structures in the polar cap flow entry region

A two-dimensional ionospheric convection model has been developed to produce convection patterns for southward interplanetary magnetic field (IMF) and a positive or negative IMF y component. The model consists of a movable, shear convection reversal boundary with a gap in it where flux enters the polar cap. The sign of IMF B(y) determines the dayside gap geometry. This simple model is used to simulate measured ionospheric flows from the DE 2 satellite. Roughly 35 percent of DE 2 passes that cross the dayside between 0800 and 1400 hours MLT cannot be modeled with a single narrow flow entry region. By comparing model calculations and the measured ion flows, it is shown that the dayside flow entry region to the polar cap typically spans several hours in local time. The electric field can concentrate along portions of the polar cap entrance and weaken between the concentrated regions, thus forming multiple 'throats'.

Moses, J. J.↗
NASA NTRS1990

Electron plasma oscillations in the Venus foreshock

Plasma waves are observed in the solar wind upstream of the Venus bow shock by the Pioneer Venus Orbiter. These wave signatures occur during periods when the interplanetary magnetic field through the spacecraft position intersects the bow shock, thereby placing the spacecraft in the foreshock region. The electron foreshock boundary is clearly evident in the data as a sharp onset in wave activity and a peak in intensity. Wave intensity is seen to drop rapidly with increasing penetration into the foreshock. The peak wave electric field strength at the electron foreshock boundary is found to be similar to terrestrial observations. A normalized wave spectrum was constructed using measurements of the electron plasma frequency and the spectrum was found to be centered about this value. These results, along with polarization studies showing the wave electric field to be field aligned, are consistent with the interpretation of the waves as electron plasma oscillations.

Crawford, G. K.↗
NASA NTRS2001

A Multispacecraft/Instrument Case Study of the Relationship Between the Solar Wind and Ionospheric Plasma Outflow

The study of the relationship between the solar wind and ionospheric plasma outflows is fundamental to understanding the solar- terrestrial relationship. A multi-spacecraft/instrument case study has been carried out to address this relationship. On 11-26-00 the Polar spacecraft made a pass through the southern cleft region near perigee where the Thermal Ion Dynamics Experiment (TIDE) instrument observed a classic Cleft Ion Fountain/upwelling ion signature. These observations followed several pressure pulses from the solar wind as evidenced by observations from the Magnetic Field Instrument (MFI) on the WIND spacecraft. Several interesting electric field features were observed by the Electric Field Instrument (EFI) as Polar appeared to pass through a narrow region of strong currents into a region with significant oscillations at a large range of frequencies. In addition, coincident with the TIDE observations of ion outflow, the low-energy edge of the characteristic V-shape of cusp ion injections was also observed. During this same time frame the Cluster spacecrafts crossed the magnetopause in the dusk sector and observed the electric field signatures associated with this region on all three satellites. This event is addressed in detail to further detail cleft ion fountain source characteristics, to add additional data regarding the hypothesis that solar wind pressure pulses are a trigger for cleft outflow, and to investigate possible interactions among waves, ionospheric plasma, and cusp injected plasma.

Craven, Paul D.↗
DOE OSTI2023

Atomic-scale polarization switching in wurtzite ferroelectrics

Ferroelectric wurtzites have the potential to revolutionize modern microelectronics because they are easily integrated with multiple mainstream semiconductor platforms. However, the electric fields required to reverse their polarization direction and unlock electronic and optical functions need substantial reduction for operational compatibility with complementary metal-oxide semiconductor (CMOS) electronics. To understand this process, we observed and quantified real-time polarization switching of a representative ferroelectric wurtzite (Al 0.94 B 0.06 N) at the atomic scale with scanning transmission electron microscopy. The analysis revealed a polarization reversal model in which puckered aluminum/boron nitride rings in the wurtzite basal planes gradually flatten and adopt a transient nonpolar geometry. Independent first-principles simulations reveal the details and energetics of the reversal process through an antipolar phase. Furthermore, this model and local mechanistic understanding are a critical initial step for property engineering efforts in this emerging material class.

36 MATERIALS SCIENCE↗
NASA NTRS2010

Dynamics of Ring Current and Electric Fields in the Inner Magnetosphere During Disturbed Periods: CRCM-BATS-R-US Coupled Model

We present simulation results from a one-way coupled global MHD model (Block-Adaptive-Tree Solar-Wind Roe-Type Upwind Scheme, BATS-R-US) and kinetic ring current models (Comprehensive Ring Current Model, CRCM, and Fok Ring Current, FokRC). The BATS-R-US provides the CRCM/FokRC with magnetic field information and plasma density/temperature at the polar CRCM/FokRC boundary. The CRCM uses an electric potential from the BATS-R-US ionospheric solver at the polar CRCM boundary in order to calculate the electric field pattern consistent with the CRCM pressure distribution. The FokRC electric field potential is taken from BATS-R-US ionospheric solver everywhere in the modeled region, and the effect of Region II currents is neglected. We show that for an idealized case with southward-northward-southward Bz IMF turning, CRCM-BATS-R-US reproduces well known features of inner magnetosphere electrodynamics: strong/weak convection under the southward/northward Bz; electric field shielding/overshielding/penetration effects; an injection during the substorm development; Subauroral Ion Drift or Polarization Jet (SAID/PJ) signature in the dusk sector. Furthermore, we find for the idealized case that SAID/PJ forms during the substorm growth phase, and that substorm injection has its own structure of field-aligned currents which resembles a substorm current wedge. For an actual event (12 August 2000 storm), we calculate ENA emissions and compare with Imager for Magnetopause-to-Aurora Global Exploration/High Energy Neutral Atom data. The CRCM-BATS-R-US reproduces both the global morphology of ring current and the fine structure of ring current injection. The FokRC-BATS-R-US shows the effect of a realistic description of Region II currents in ring current-MHD coupled models.

Buzulukova, N.↗
NASA NTRS2009

The Thermal Electrical Conductivity Probe (TECP) for Phoenix

The Thermal and Electrical Conductivity Probe (TECP) is a component of the Microscopy, Electrochemistry, and Conductivity Analyzer (MECA) payload on the Phoenix Lander. TECP will measure the temperature, thermal conductivity and volumetric heat capacity of the regolith. It will also detect and quantify the population of mobile H2O molecules in the regolith, if any, throughout the polar summer, by measuring the electrical conductivity of the regolith, as well as the dielectric permittivity. In the vapor phase, TECP is capable of measuring the atmospheric H2O vapor abundance, as well as augment the wind velocity measurements from the meteorology instrumentation. TECP is mounted near the end of the 2.3 m Robotic Arm, and can be placed either in the regolith material or held aloft in the atmosphere. This paper describes the development and calibration of the TECP. In addition, substantial characterization of the instrument has been conducted to identify behavioral characteristics that might affect landed surface operations. The greatest potential issue identified in characterization tests is the extraordinary sensitivity of the TECP to placement. Small gaps alter the contact between the TECP and regolith, complicating data interpretation. Testing with the Phoenix Robotic Arm identified mitigation techniques that will be implemented during flight. A flight model of the instrument was also field tested in the Antarctic Dry Valleys during the 2007-2008 International Polar year. 2

Zent, Aaron P.↗
NASA NTRS1988

The polar wind

The classical polar wind is considered to be an ambipolar outflow of thermal plasma from the terrestrial ionosphere at high latitudes. The paper reviews the characteristic features of this flow, with emphasis placed on recent theoretical predictions. Consideration is given to H(+) and He(+) outflow characteristics both with and without convection electric field effects, the collisionless polar wind characteristics (including the formation of temperature anisotropies), and the time-dependent polar wind behavior in response to localized density perturbations and localized heat sources.

Schunk, R. W.↗
DOE OSTI2022

Surface ionization waves propagating over non-planar substrates: wavy surfaces, cut-pores and droplets

Atmospheric pressure plasmas intersecting with dielectric surfaces will often transition into surface ionization waves (SIWs). Several applications of these discharges are purposely configured to be SIWs. During propagation of an SIW over a dielectric surface, the plasma charges the surface while responding to changes in geometrical and electrical material properties. This is particularly important for non-planar surfaces where polarization of the dielectric results in local electric field enhancement. In this paper, we discuss results from computational investigations of negative and positive SIWs propagating over nonplanar dielectrics in three configurations—wavy surfaces, cuts through porous materials and water droplets on flat surfaces. Here we found that negative SIWs are particularly sensitive to the electric field enhancement that occurs at the crests of non-planar surfaces. The local increase in ionization rates by the electric field enhancement can result in the SIW detaching from the surface, which produces non-uniform plasma exposure of the surface. Positive SIWs tend to adhere to the surface to a greater degree. These trends indicate that treatment of pathogen containing droplets on surfaces may be best performed by positive SIWs. The same principles apply to the surfaces cut through pores. Buried pores with small openings to the SIW may be filled by plasma by either flow of plasma into the pore (large opening) or initiated by photoionization (small opening), depending on the size of the opening compared to the Debye length.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Electrical Energy Storage by Poly(ionic Liquids)

Abstract Manipulating van der Waals (vdW) and ionic interactions in polymers enable energy storage and formations of active or passive components of electrical circuits. The energy storage is achieved by electrically activating ion pairs containing polymers, which create ergotropically favorable non‐equilibrium gradient states. Molecular‐level events responsible for this behavior involve concurrent ion pairs' polarization‐depolarization gradients and conformational changes of aliphatic tails that collectively contribute to lowering local disorder states. Manipulating ionic and vdW interactions stabilizes polarized anion‐cation pairs, thus maintaining electrical energy storage for extended periods. These transparent and easily moldable materials require no multilayered assemblies, and their functional features depend upon polarization conditions and ionic‐vdW interactions, making them applicable in energy storage and other devices transcending classical time intricacy limits.

Liu, Jiahui [Department of Materials Science and E↗