Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EXACT SOLUTIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Development of a second order closure model for computation of turbulent diffusion flames

A typical eddy box model for the second-order closure of turbulent, multispecies, reacting flows developed. The model structure was quite general and was valid for an arbitrary number of species. For the case of a reaction involving three species, the nine model parameters were determined from equations for nine independent first- and second-order correlations. The model enabled calculation of any higher-order correlation involving mass fractions, temperatures, and reaction rates in terms of first- and second-order correlations. Model predictions for the reaction rate were in very good agreement with exact solutions of the reaction rate equations for a number of assumed flow distributions.

Varma, A. K.↗
NASA NTRS1974

Behaviour of ion velocity distributions for a simple collision model

Calculation of the ion velocity distributions for a weakly ionized plasma subjected to crossed electric and magnetic fields. An exact solution to Boltzmann's equation has been obtained by replacing the Boltzmann collision integral with a simple relaxation model. At altitudes above about 150 km, where the ion collision frequency is much less than the ion cyclotron frequency, the ion distribution takes the shape of a torus in velocity space for electric fields greater than 40 mV/m. This shape persists for one to two hours after application of the electric field. At altitudes where the ion collision and cyclotron frequencies are approximately equal (about 120 km), the ion velocity distribution is shaped like a bean for large electric field strengths. This bean-shaped distribution persists throughout the lifetime of ionospheric electric fields. These highly non-Maxwellian ion velocity distributions may have an appreciable affect on the interpretation of ion temperature measurements.

St-Maurice, J.-P.↗
NASA NTRS1974

Electron motion in a helically perturbed magnetic field

Exact solutions have been obtained for the equations of an electron subjected to a transverse rotating magnetic field superimposed on a homogeneous axial magnetic field. The solutions show that complete transfer of the axial energy into transverse energy is possible for a range of values of the injection velocity and the transverse magnetic field.

Singh, A.↗
NASA NTRS1974

Quantum graviton creation in a model universe

Consideration of the mechanism of production of gravitons in the empty, anisotropic, spatially inhomogeneous Gowdy three-torus cosmology. The Gowdy cosmology is an exact solution of the vacuum Einstein equations and is obtained as a generalization of the homogeneous empty Bianchi Type I (Kasner) cosmology by permitting the metric components to depend on one of the space variables in addition to time. The Hamiltonian methods of Arnowitt, Deser, and Misner are employed to identify the dynamical variables which are to be quantized. The WKB regime solution is identical to that found by Doroshkevich, Zel'dovich, and Novikov (DZN) for a universe containing collisionless anisotropic radiation. Using a procedure similar to that of Parker (1971) or Zel'dovich and Starobinskii (1971) for defining quantum number, it is found that the DZN large-time radiation consists of quanta (gravitons) created from an initial vacuum. The quantum behavior is much like the semiclassical enhancement of quantum number with the added feature of creation of quanta from vacuum fluctuations.

Berger, B. K.↗
NASA NTRS1974

A quasi-vortex-lattice method in thin wing theory

A quasi-continuous method is developed for solving thin-wing problems. For the purpose of satisfying the wing boundary conditions, the spanwise vortex distribution is assumed to be stepwise-constant, while the chordwise vortex integral is reduced to a finite sum through a modified trapezoidal rule and the theory of Chebyshev polynomials. Wing-edge and Cauchy singularities are acounted for. The total aerodynamic characteristics are obtained by an appropriate quadrature integration. The two-dimensional results for airfoils without flap deflection reproduce the exact solutions in lift and pitching moment coefficients, the leading edge suction, and the pressure difference at a finite number of points. For a flapped airfoil, the present results are more accurate than those given by the vortex-lattice method. The three-dimensional results also show an improvement over the results of the vortex-lattice method. Extension to nonplanar applications is discussed.

Lan, C. E.↗
NASA NTRS1974

Finite-element analysis of vibration and flutter of cantilever anisotropic plates

The hybrid stress finite element method is used to study the effects of filament angle and orthotropicity parameter on the vibration and flutter characteristics of cantilevered anisotropic plates. The results indicate a generally strong lack of monotonic dependence on filament angle. Also, the natural frequency in certain cases involving the first few modes, can become relatively insensitive to both filament angle and orthotropicity parameter for a range of filament angle beyond 70 deg. Values of critical dynamic pressure are obtained by a modal approach, in which the mode shapes are obtained by the hybrid stress method. Convergence of the modal method is rather rapid for the configurations analyzed, and a comparison of the method with an exact solution for the case of an isotropic simply supported plate shows that use of six modes gives excellent agreement.

Rossettos, J. N.↗
NASA NTRS1974

Error estimates for approximate dynamic systems

Two approaches are investigated for obtaining estimates on the error between approximate and exact solutions of dynamic systems. The first method is primarily useful if the system is nonlinear and of low dimension. The second requires construction of a system of v-functions but is useful for higher dimensional systems, either linear or nonlinear.

Gunderson, R. W.↗
NASA NTRS1974

Quantum descriptions of singularities leading to pair creation

A class of cosmological models is analyzed which provide a mathematically convenient (but idealized) description of a cosmological singularity that develops into a pair creation epoch and terminates in an adiabatic expansion with redshifting particle energies. This class of models was obtained by Gowdy (1971, 1974) as a set of exact solutions of the classical empty space Einstein equations describing inhomogeneous universes populated only by gravitational waves. It is shown that these models can be used to exhibit simplified models of quantized gravitational fields, and that a quantum description can be given arbitrarily near a cosmological singularity. Graviton pair creation occurs, and can be seen to convert anisotropic expansion rates into the energy of graviton pairs.

Misner, C. W.↗
NASA NTRS1974

The structure of synchronously rotating close binaries built on polytropic model nu = 3

Mathematical procedures are developed which can provide an exact solution for the structure of synchronously rotating close binaries built on the polytropic model with nu equal to 3. Results are discussed for separations of centers of 10.0, 4.0, 3.0, and 2.8 solar radii. For the present discussion, both components are assumed to have the solar mass and, in the zeroth approximation, the solar radius. The present results are compared with those obtained by Chandrasekhar (1933) using first-order perturbation theory.

Green, L. C.↗
NASA NTRS1975

Two-dimensional jet mixing with a pressure gradient

An analytical study of nonsimilar jet mixing is made for compressible, nonisoenergetic flows. The conservation equations are solved for each of the streams above and below the dividing streamline by using Meksyn's asymptotic method of integration for solving boundary-layer problems. The problem of laminar mixing between two parallel streams is investigated for the case of a constant pressure gradient. It is found that the velocity and temperature profiles from the exact solution to the nonsimilar governing equations can be well approximated by the locally similar solution.

Brink, D. F.↗
NASA NTRS1975

Analysis of liquid-metal-jet impingement cooling in a corner region and for a row of jets

A conformal mapping method was used to analyze liquid-metal-jet impingement heat transfer. The jet flow region and energy equation are transformed to correspond to uniform flow in a parallel plate channel with nonuniform heat addition along a portion of one wall. The exact solution for the wall-temperature distribution was obtained in the transformed channel, and the results are mapped back into the physical plane. Two geometries are analyzed. One is for a single slot jet directed either into an interior corner formed by two flat plates, or over the external sides of the corner; the flat plates are uniformly heated, and the corner can have various included angles. The heat-transfer coefficient at the stagnation point at the apex of the plates is obtained as a function of the corner angle, and temperature distributions are calculated along the heated walls. The second geometry is an infinite row of uniformly spaced parallel slot jets impinging normally against a uniformly heated plate. The heat-transfer behavior is obtained as a function of the spacing between the jets. Results are given for several jet Peclet numbers from 5 to 50.

Siegel, R.↗
NASA NTRS1975

Surface fitting three-dimensional bodies

The geometry of general three-dimensional bodies was generated from coordinates of points in several cross sections. Since these points may not be on smooth curves, they are divided into groups forming segments and general conic sections are curve fit in a least-squares sense to each segment of a cross section. The conic sections are then blended in the longitudinal direction through longitudinal curves. Both the cross-sectional and longitudinal curves may be modified by specifying particular segments as straight lines or specifying slopes at selected points. This method was used to surface fit a 70 deg slab delta wing and the HL-10 Lifting Body. The results for the delta wing were very close to the exact geometry. Although there is no exact solution for the lifting body, the surface fit generated a smooth surface with cross-sectional planes very close to prescribed coordinate points.

Dejarnette, F. R.↗
NASA NTRS1975

A three-dimensional viscoelastic model of a strike slip fault

An analytic approximation to the Green's function for the displacements due to a strike slip point source in an elastic layer over a viscoelastic half-space is developed. This approximate Green's function is useful because it can be analytically integrated over the fault surface. Comparison with a numerical integration of the exact solution integral indicates that the approximation is quite good. The approximate Green's function is integrated analytically to obtain the displacements due to a finite rectangular strike slip fault in an elastic layer over a viscoelastic half-space. Ground displacements and angle changes from a model survey net are computed to illustrate the viscoelastic relaxation which follows a fracture in the elastic region.

Rundle, J. B.↗
NASA NTRS1976

Some considerations of the dynamics of Space Shuttle vehicle thermal protection system

Two types of reusable surface insulation under consideration for Space Shuttle applications have been analyzed for flutter stability. The first consisted of silicone rubber-coated Nomex felt bonded to the skin of the vehicle; the second consisted of silicone tiles with ceramic coating on five faces, bonded to Nomex felt which was then attached to the vehicle skin. The piston theory was used to compute the aerodynamic forces on the basis of simple models on the two systems. Exact solutions were obtained, and the effect of different parameters of the flutter stability boundary was investigated. Possible reasons for the slow convergence of the Galerkin technique for analyzing membrane flutter are suggested, and a consistent set of nondimensional parameters convenient for flutter studies is introduced.

Kuo, C.-C.↗
NASA NTRS1976

On a spherical star system with a collapsed core

Exact solutions of Einstein's equations for a perfect fluid that describe the gravitational collapse of matter around a collapsed core are presented. The collapsed region grows monotonically until an absolute Schwarzschild horizon is formed. It is found that the minimum redshift of light emitted radially from the boundary of the system and received at infinity is approximately 4.62. These systems are expected to describe the very last stages in the gravitational collapse of a globular star cluster with a central collapsed core.

Glass, E. N.↗
NASA NTRS1976

Stage separation study of Nike-Black Brant V Sounding Rocket System

A new Sounding Rocket System has been developed. It consists of a Nike Booster and a Black Brant V Sustainer with slanted fins which extend beyond its nozzle exit plane. A cursory look was taken at different factors which must be considered when studying a passive separation system. That is, one separation system without mechanical constraints in the axial direction and which will allow separation due to drag differential accelerations between the Booster and the Sustainer. The equations of motion were derived for rigid body motions and exact solutions were obtained. The analysis developed could be applied to any other staging problem of a Sounding Rocket System.

Ferragut, N. J.↗
NASA NTRS1976

Remarks on the construction of a second-order closure description of turbulent reacting flows

In this paper an attempt is made to illustrate how second-order closure techniques might be used to make detailed calculations of turbulent diffusion flames. Two of the problems of closure that are peculiar to turbulent chemically reacting flows are discussed in some detail. These are the problem of computing in a consistent way all the correlations of fluctuations in scalar quantities needed for closure and the problem of the generation of turbulence by chemical reactions. Tentative closure models are put forward for both of these problems. Although the closure model for fluctuations in scalar quantities can, to a certain extent, be checked against idealized numerical examples for which exact solutions are known, the validity of both the closure models proposed here must, in the end, be determined by detailed comparison of computed results with experimental data.

DONALDSON C. DUP.↗