Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dynamic optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Entropy production fluctuations encode collective behavior in active matter

We derive a general lower bound on distributions of entropy production in interacting active matter systems. The bound is tight in the limit that interparticle correlations are small and short-ranged, which we explore in four canonical active matter models. In all models studied, the bound is weak where collective fluctuations result in long-ranged correlations, which subsequently links the locations of phase transitions to enhanced entropy production fluctuations. We develop a theory for the onset of enhanced fluctuations and relate it to specific phase transitions in active Brownian particles. Furthermore, we also derive optimal control forces that realize the dynamics necessary to tune dissipation and manipulate the system between phases. In so doing, we uncover a general relationship between entropy production and pattern formation in active matter, as well as ways of controlling it.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Detecting Spin-Bath Polarization with Quantum Quench Phase Shifts of Single Spins in Diamond

Single-qubit sensing protocols can be used to measure qubit-bath coupling parameters. However, for sufficiently large coupling, the sensing protocol itself perturbs the bath, which is predicted to result in a characteristic response in the sensing measurements. Here, we observe this bath perturbation, also known as a quantum quench, by preparing the nuclear spin bath of a nitrogen-vacancy (NV) center in polarized initial states and performing phase-resolved spin-echo measurements on the NV electron spin. These measurements reveal a time-dependent phase determined by the initial state of the bath. We derive the relationship between the sensor phase and the Gaussian spin-bath polarization and apply it to reconstruct both the axial and transverse polarization components. Using this insight, we optimize the transfer efficiency of our dynamic nuclear polarization sequence. This technique for directly measuring bath polarization may assist in preparing high-fidelity quantum memory states, improving nanoscale NMR methods, and investigating non-Gaussian quantum baths.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Adaptive Reinforcement Learning Control for Power Distribution in Multi-Output Resonant Converters

This paper presents an adaptive reinforcement learning (ARL)-based control framework for efficient power distribution in a multi-output resonant converter for UAV applications. The proposed system is based on a high-frequency isolated resonant architecture, where a single energy source supplies multiple propulsion loads through independently controlled output rectifiers, addressing the need for coordinated multi-motor power management. The ARL framework dynamically allocates output power by learning optimal phase-shift control actions under varying load demands and operating conditions. The agent autonomously determines control parameters that maximize conversion efficiency while ensuring accurate power sharing among multiple outputs. In addition, the proposed approach enables adaptive operation without requiring detailed system modeling or manual tuning. Experimental results demonstrate stable and efficient performance over a wide range of operating conditions, confirming the effectiveness and robustness of the learning-based control strategy for multi-output resonant converter system.

Asa, Erdem [ORNL] (ORCID:0000000190884812)↗
DOE OSTI2025

Performance Impact and Trade-Offs for Tuning Key Architectural Parameters on CPU+GPU Systems

In this work, we performed an initial design space exploration of an accelerated processing unit (APU)—a hybrid CPU+GPU architecture that integrates both compute units (CUs) and memory into a unified system. This integration aims to reduce data movement, enhance memory locality, and improve energy efficiency by enabling the CPU and GPU to share memory directly. This effort focused on the interplay of key design components—cache line size, the number of CUs, and main memory technology—and the trade-offs of each configuration were analyzed. This paper highlights the various configurations’ impact on memory accesses, data reuse, and power utilization. The results provide valuable insights that can be leveraged to optimize APU architectures for high-performance and energy-efficient computing and thus create a balanced architecture. This optimization can be achieved by adopting dynamic cache management, runtime CU scaling, and advanced memory integration, highlighting the potential of APUs to address critical challenges in compute, data movement, and memory power consumption.

Asifuzzaman, Kazi [ORNL] (ORCID:0000000240044791)↗
DOE OSTI2021

WaterTAP v1.0.0

WaterTAP is a new open source library of water-specific models built on the IDAES Integrated Platform to support the design and optimization of integrated water treatment systems, improve existing systems and enable the analysis of new designs incorporating emerging technologies. WaterTAP enables advanced modeling and optimization for: conceptual and multiscale design, dynamics and model predictive control of water systems and networks.

Beattie, KeithS↗
DOE OSTI2025

SIDDA: SInkhorn Dynamic Domain Adaptation for Image Classification

SInkhorn Dynamic Domain Adaptation (SIDDA) supplements the experiments presented in 2501.14048, SIDDA: SInkhorn Dynamic Domain Adaptation for Image Classification with Equivariant Neural Networks. SIDDA introduces a semi-supervised, automatic domain adaptation method that leverages Sinkhorn divergences to dynamically adjust the regularization in the optimal transport plan and the weighting between classification and domain adaptation loss terms during training.

Pandya, Sneh [Fermi National Accelerator Laborator↗
DOE OSTI2023

Multiphysics Computational Fluid Dynamics for Design and Scale-Up of CO 2 /Syngas Bioreactors [Poster]

What are we trying to do? Develop validated, high fidelity computational models for gas fermentation using CO 2 , CO and H 2 . How is it done today? Microbiological advances are made at the lab scale in well mixed reactors. Process scale-up remains an open question when considering novel microorganisms/reaction systems. Why is this important? Lab-to-production scale transition is required to achieve CO 2 conversion at Mton/Gton scale and computational models can de-risk/accelerate this transition.

09 BIOMASS FUELS↗
DOE OSTI2025

CO 2 Transport Infrastructure Outlook in the United States

Carbon capture and storage (CCS) represents one of the most important methods to mitigate anthropogenic carbon emissions at a large scale, playing a key role in meeting climate change targets (Bui et al., 2018) and for net-zero CO 2 by 2050 scenarios in the United States (Browning et al., 2023). This technology involves capturing CO 2 emissions from industrial processes, transporting them via pipelines, trucks, rails, or ships, and ultimately storing them in underground geological sites, such as saline aquifers or depleted oil reservoirs. Thus, to encourage carbon reduction initiatives, the U.S. Congress enacted the Bipartisan Budget Act in 2018, reforming the 45Q tax credit to benefit operators storing CO 2 in geologic formations (Jones and Sherlock, 2021). Additionally, the 2022 Inflation Reduction Act further expanded these incentives, providing additional support for CCS initiatives (Hackett and Kuehn, 2023). Although numerous studies describe the importance of optimal CO 2 transportation to support the decision-making of CCS projects aligned with the objective of net-zero emissions by 2050 (Abramson and Christensen, 2021; Chen and Pawar, 2023; Greig and Pascale, 2021), further efforts are required to optimize the transport infrastructure for national-scale CCS deployment. Therefore, in this study, we examine three nationwide scenarios with the SimCCS 3.0 tool (Ma et al., 2022, 2023, 2024) along with a novel geospatial splitting approach developed by Velasco-Lozano et al. (Velasco- Lozano et al., 2024a, 2024b). We present optimized pipeline networks that meet the dynamic evolution of annual capture amounts, describing the required total pipeline lengths at each stage as a function of the pipeline diameters. Thus, the cases presented demonstrate the feasibility of CO 2 pipeline infrastructure for large-scale CCS projects.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Accelerator Physics at NSLS-II: Research Accomplishments in 2024

NSLS-II accelerator physicists advanced the operational performance and scientific capabilities of NSLS-II, providing regular lattice characterization and correction, injec tion optimization, vertical emittance control, and beam dynamics reports with corre lation analysis. We further developed advanced lattice characterization techniques and studies on impedance, beam-induced heating, and higher-harmonic RF cavity effects to support NSLS-II and its high-brightness upgrade. The assessment of free-electron laser options for the NSLS-II upgrade has been completed. We carried out comprehensive studies focused on complex bend magnets and novel efficient injection schemes for next-generation low-emittance synchrotrons. We contributed to the Electron-Ion Collider project, including Electron Storage Ring lattice design, beam diagnostics, and injector studies. The physicists participated in international collaborations, including the development of Python-based Middle Layer software, and participated in key accel erator physics workshops and scientific meetings. The main research accomplishments achieved in 2024 are summarized in this report.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

High Performance Solvent for NGCC Flue Gas CO 2 Capture (Final Technical Report)

Amine-based solvent absorption is the most mature and reliable technology for large scale CO 2 capture, dating back to the 1930s when monoethanolamine (MEA) was used to treat acid gases from oil refineries. However, while strategic advancements have optimized the CO2 capture process, the cost of capture remains high, where current estimates suggest that CO 2 capture costs are around $\$$72/tonne of CO 2 . To address this, solvent development and optimization have become a focus of current research. This project sought to develop a high-performance solvent to reduce the overall cost of CO 2 capture from NGCC flue gas. Here, solvent optimization focused on: (1) reducing the energy required for CO 2 desorption in a reboiler, (2) improving CO 2 absorption and desorption reaction kinetics, (3) improving solvent stability, and (4) reducing environmental impacts. Susteon has developed and evaluated a promoted solvent, Sustenol™, for NGCC flue gas CO 2 capture. The optimized Sustenol™ also shows a higher dynamic CO 2 absorption capacity of ~0.5 mol CO2 /mol amine compared to 0.25 mol CO2 /mol amine for 30 wt% MEA. Additionally, the solvent is oxidatively, thermally and hydrothermally stable, which leads to lower solvent loss and emissions. These advancements have resulted in a solvent regeneration energy of 2.16 GJ/tonne of CO 2 which is >30% lower than current state-of-the-art commercial and emerging solvents. Combined with empirical data from the bench and pilot scale testing, this preliminary TEA study indicated the cost of CO 2 capture by Sustenol™ for 97% CO 2 removal at $\$$54/tonne and for 90% removal at $\$$49/tonne, with a pathway to achieve $\$$45/tonne of CO 2 with continued process and solvent advancements. Susteon has developed a technology roadmap to reduce the cost of CO 2 capture to <$\$$45/tonne for NGCC flue gas. Susteon plans to derisk this technology for commercial deployment through comprehensive solvent degradation testing, long-term testing in a pilot plant at 5 tonne CO2 /day and demonstration scale testing at 100 tonne CO2 /day with NGCC flue gas and engineering design studies to qualify Sustenol™ as a drop-in replacement solvent.

03 NATURAL GAS↗
DOE OSTI2023

Towards constrained grid-forming control

Grid-forming converters are commonly envisioned to replace conventional synchronous generators as the cornerstone of future power systems. However, compared to synchronous generators, power converters and their power sources (e.g., renewable generation, energy storage) are subject to significant physical constraints (e.g., current limits, modulation limits). Grid-forming controls are commonly designed neglecting these constraints and subsequently augmented with limiters for a subset of constraints. In this work, we propose a systematic approach to constrained grid-forming control of two-level voltage source converters interfacing photovoltaics. We first formulate grid-forming control objectives and constraints of voltage source converters and photovoltaics in a one-step optimal grid-forming control problem. Next, we leverage primal-dual dynamics to obtain a dynamic feedback controller that approximates the solution of the one-step optimal grid-forming control problem. Finally, electromagnetic transient simulations are used to illustrate the results.

Gross, Dominic↗
DOE OSTI2026

On-Demand Transit: Features, Benefits, Challenges, Costs, and Evaluation

The U.S. Department of Energy's National Laboratory of the Rockies works in partnership with communities and transit agencies across North America to support and evaluate customized on-demand transit (ODT) systems. ODT, also known as on-demand mobility or microtransit, is a flexible form of public mobility. Unlike traditional fixed-route transit, ODT adjusts where and when service is provided rather than following predetermined schedules and routes. Having evolved from commercial ride-hailing business models, ODT leverages smartphone connectivity and real-time route optimization to provide highly responsive and dynamic service. ODT trips, which are usually shared, can function as a standalone service or as a first-/last-mile service connecting riders to other types of transit.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2021

Net Electronic Charge as an Effective Electronic Descriptor for Oxygen Release and Transport Properties of SrFeO 3 -based Oxygen Sorbents

Perovskite oxides, as oxygen sorbents, exhibit excellent potential in thermochemical redox applications such as chemical looping air separation (CLAS), resulting from their excellent redox properties and high tunability. The structural and compositional flexibility of perovskites, while making these mixed oxides highly versatile, also poses challenges for their design and optimization. Moreover, the elevated operating temperature and dynamic oxygen partial pressure swings during redox processes add additional complications for oxygen sorbent design. From a fundamental standpoint, finding simple yet effective descriptors for the effect of cation substitutions on oxygen sorbents’ redox and oxygen transport properties are of significant importance for rational optimization of perovskite-based oxygen sorbents. In the present study, a series of A/B-site-doped SrFeO 3-δ perovskites are investigated using density functional theory (DFT) + U simulations. From these simulations, an effective electronic structural descriptor, the net electronic charge (Δe) of oxygen anions, is extracted based on its excellent correlations with vacancy formation energy, experimentally derived oxygen capacity, and oxygen vacancy migration barrier. Overall, these findings provide an effective tool to correlate the oxygen sorbents’ redox performances with a simple yet physically meaningful descriptor for rational design and optimization of perovskites in the context of CLAS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

What Composition of High-Energy Physics Collaborations is Epistemically Optimal?

Computer simulations have recently come to the fore as a crucial tool for studying epistemic dynamics of scientific collectives. One pressing issue in big-ticket, long-term, and crowded particle physics research is the optimal organization of collaborations. This research developed a computation model of collaborations in high-energy physics and performed simulations to investigate the epistemic efficiency of groups and its dependence on the size of such groups and their composition: namely, percentages of pure, partially theoretically competent, and fully theoretically competent experimentalists. The present study reveals that in both small (100-member) and large (3000-member) groups, epistemic payoff as the measure of epistemic efficiency of collaborations is, generally, positively correlated with an increase in both the number of theoretically fully competent and pure (incompetent) experimentalists. Here, we are less certain of such conclusion in the case of the small collaborations. Although the subcommunity of experimentalists who are partially expert is not found to be immediately epistemically beneficial for collaborations, nevertheless they also crucially serve as a transitional community between the theorists and the experimentalists. Predicated on the toy model simulations, I suggest that institutions should provide measures to assist members of the latter subgroup in progressing toward developing a full theoretical expertise.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Examining the Economic Optimality of Automatic Generation Control

The automatic generation control (AGC) system is temporally situated between economic dispatch and synchronous generator dynamics, and its primary role is to regulate frequency within and tie-line flows between control areas. Given appropriate choice of participation factors (feed-forward controller gains that govern the disaggregation of the area-level power requirement to individual generators), the AGC can be engineered to nudge system dynamics toward a steady-state operating point corresponding to economic optimality. This paper establishes necessary and sufficient conditions under which a widely accepted choice of participation factors guarantees the alignment of steady-state synchronous generator outputs with a global minimum of a prototypical economic dispatch problem. In so doing, it resolves several ambiguities and formalizes technical assumptions governing the role of the standard AGC architecture in the context of economic dispatch and steady-state operation. Numerical case studies tailored to a modified version of the New England 39-bus 10-machine test system validate the theoretical results.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Bridging microscopy with molecular dynamics and quantum simulations: an atomAI based pipeline

Recent advances in (scanning) transmission electron microscopy have enabled a routine generation of large volumes of high-veracity structural data on 2D and 3D materials, naturally offering the challenge of using these as starting inputs for atomistic simulations. In this fashion, the theory will address experimentally emerging structures, as opposed to the full range of theoretically possible atomic configurations. However, this challenge is highly nontrivial due to the extreme disparity between intrinsic timescales accessible to modern simulations and microscopy, as well as latencies of microscopy and simulations per se. Addressing this issue requires as a first step bridging the instrumental data flow and physics-based simulation environment, to enable the selection of regions of interest and exploring them using physical simulations. Here we report the development of the machine learning workflow that directly bridges the instrument data stream into Python-based molecular dynamics and density functional theory environments using pre-trained neural networks to convert imaging data to physical descriptors. Additionally, the pathways to ensure structural stability and compensate for the observational biases universally present in the data are identified in the workflow. This approach is used for a graphene system to reconstruct optimized geometry and simulate temperature-dependent dynamics including adsorption of Cr as an ad-atom and graphene healing effects. However, it is universal and can be used for other material systems.

36 MATERIALS SCIENCE↗