A functionally-integrated controller- commutator for use in brushless direct-drive solar array reorientation systems
Electronic commutator and rate-sensor for brushless direct-drive solar array reorientation systems
SENSOR↗
SEARCH · Engineering Papers
Results for “Drive systems”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Engine Power Turbine and Propulsion Pod Arrangement Study
A study has been conducted for NASA Glenn Research Center under contract NNC10BA05B, Task NNC11TA80T to identify beneficial arrangements of the turboshaft engine, transmissions and related systems within the propulsion pod nacelle of NASA's Large Civil Tilt-Rotor 2nd iteration (LCTR2) vehicle. Propulsion pod layouts were used to investigate potential advantages, disadvantages, as well as constraints of various arrangements assuming front or aft shafted engines. Results from previous NASA LCTR2 propulsion system studies and tasks performed by Boeing under NASA contracts are used as the basis for this study. This configuration consists of two Fixed Geometry Variable Speed Power Turbine Engines and related drive and rotor systems (per nacelle) arranged in tilting nacelles near the wing tip. Entry-into-service (EIS) 2035 technology is assumed for both the engine and drive systems. The variable speed rotor system changes from 100 percent speed for hover to 54 percent speed for cruise by the means of a two speed gearbox concept developed under previous NASA contracts. Propulsion and drive system configurations that resulted in minimum vehicle gross weight were identified in previous work and used here. Results reported in this study illustrate that a forward shafted engine has a slight weight benefit over an aft shafted engine for the LCTR2 vehicle. Although the aft shafted engines provide a more controlled and centered CG (between hover and cruise), the length of the long rotor shaft and complicated engine exhaust arrangement outweighed the potential benefits. A Multi-Disciplinary Analysis and Optimization (MDAO) approach for transmission sizing was also explored for this study. This tool offers quick analysis of gear loads, bearing lives, efficiencies, etc., through use of commercially available RomaxDESIGNER software. The goal was to create quick methods to explore various concept models. The output results from RomaxDESIGNER have been successfully linked to Boeing spreadsheets that generate gear tooth geometry in Catia 3D environment. Another initial goal was to link information from RomaxDESIGNER (such as hp, rpm, gear ratio) to populate Boeing's parametric weight spreadsheet and create an automated method to estimate drive system weight. This was only partially achieved due to the variety of weight models, number of manual inputs, and qualitative assessments required. A simplified weight spreadsheet was used with data inputs from RomaxDESIGNER along with manual inputs to perform rough weight calculations.
Robuck, Mark↗
Improving Self-Driving Labs: Quantifying System-Level Experiment Repeatability and Broadening Instrument-Level Compatibility
Modular Autonomous Research System (MARS) is a self-driving laboratory (SDL) which performs wet-lab science with peptide-lanthanide combinations in an automated and, ultimately, an autonomous manner to aid in soil analysis for domestic lithium mining. Autonomous experimentation involves automated experimentation, experiment planning, and active learning. MARS consists of a 6-axis robotic arm (UR5e) on a linear rail, pipette robots (Opentrons 2), and microplate readers. These components transport, operate on, and collect data with chemical solutions in standard labware. For effective autonomy, MARS must perform system-level labware operations repeatably, plan experiments autonomously, and be portable between research-domains. Repeatability is evaluated by labware placement precision, such that future operations can properly locate labware, as well as the elapsed time, so that low variance mean estimates of experiment duration can inform high-level researcher decision making. Autonomous experiment planning is the next step to decouple experimentation from human management; however, there is a conflict between the ideal system-level experiment goals and the constraints imposed by instruments’ limitations. Sub-domain portability is a long-term goal to extend MARS’ research beyond the chemistry of peptide-lanthanide binding to other sub-domains without having to invest significant overhead to system retrofitting. To address these goals, we manually trained the robotic arm labware placement and modelled statistical failurerate and uncertainty Additionally, we benchmarked the duration and variance of each experiment sub-operation as a heuristic for research decision making. Next, we use a parameterized geometric program (PGP) approach to design experiments that optimize system-level objectives and satisfy instrument-level constraints. Lastly, we proposed a Python framework to maximize MARS’ extensibility to other scientific sub-domains through a JSON-based experiment specification.
36 MATERIALS SCIENCE↗
Base drive for paralleled inverter systems
In a paralleled inverter system, a positive feedback current derived from the total current from all of the modules of the inverter system is applied to the base drive of each of the power transistors of all modules, thereby to provide all modules protection against open or short circuit faults occurring in any of the modules, and force equal current sharing among the modules during turn on of the power transistors.
Nagano, S.↗
Melting of charge order in the low-temperature state of an electronic ferroelectric-like system
Strong electronic interactions can drive a system into a state with a symmetry breaking. Lattice frustration or competing interactions tend to prevent symmetry breaking, leading to quantum disordered phases. In spin systems frustration can produce a spin liquid state. Frustration of a charge degree of freedom also can result in various exotic states, however, experimental data on these effects is scarce. In this work we demonstrate how in a Mott insulator on a weakly anisotropic triangular lattice a charge ordered state melts on cooling down to low temperatures. Raman scattering spectroscopy finds that κ -(BEDT-TTF) 2 Hg(SCN) 2 Cl enters an insulating “dipole solid” state at T =30K, but below T =15K the order melts, while preserving the insulating energy gap. Based on these observations, we suggest a phase diagram relevant to other quantum paraelectric materials.
36 MATERIALS SCIENCE↗
Mapping the nonequilibrium order parameter of a quasi-two dimensional charge density wave system
The driving force of a charge density wave (CDW) transition in quasi-two dimensional systems is still debated, while being crucial in understanding electronic correlation in such materials. Here we use femtosecond time- and angle-resolved photoemission spectroscopy combined with computational methods to investigate the coherent lattice dynamics of a prototypical CDW system. The photo-induced temporal evolution of the periodic lattice distortion associated with the amplitude mode reveals the dynamics of the free energy functional governing the order parameter. Our approach establishes that optically-induced screening rather than CDW melting at the electronic level leads to a transiently modified potential which explains the anharmonic behaviour of the amplitude mode and discloses the structural origin of the symmetry-breaking phase transition.
electronic properties and materials↗
Managing autonomous materials labs with multi-agent AI and its implications for the science of science
Self-driving lab systems (aka, autonomous experimentation) accelerate research - letting scientists learn faster, spend less resources, and fail smarter in well defined, narrow studies. The next-generation materials lab combines self-driving systems to tackle broader challenges - orchestrating complex research campaigns while optimizing lab resources. We propose that agent-based and agentic artificial intelligence will be an integral part of next-generation lab management and discuss potential implementation scenarios. Additionally, digital and physical sandboxes will allow scientists to evaluate diverse and dynamic research and lab management strategies. Beyond the immediate benefit to lab optimization, such sandboxes will enable realistic computational studies of the philosophy of science (i.e., science of science) to achieve higher level scientific efficiencies.
Computer science↗
Gripper Test Assembly Status of Fabrication and Assembly Report – FY2023
The Gripper Test Assembly (GrTA) is an experimental test article designed for use at the Mechanisms Engineering Test Loop (METL) at Argonne National Laboratory (ANL). The GrTA will test mechanical components intended for use in compact in-vessel fuel handling machines (FHM) for sodium cooled fast reactors (SFR). The GrTA will test radial and thrust ball bearings, radial and thrust roller bearings, ball screws and nuts, spline shafts and ball nuts, radial spur gears, and universal joints submerged in liquid sodium at high temperatures (250°C-650°C). These components will be tested in a prototypic, full-scale gripper head and under prototypic SFR fuel handling loads. The design of the GrTA was completed in FY2022 and has progressed into fabrication and initial assembly. All custom manufactured components have been fabricated and delivered to ANL following inspection. All custom gears have been fabricated and delivered to ANL. Bearings, ball screws, and spline shafts have been purchased to allow for initial assembly in air, and sodium compatible versions have either been purchased or are in design at appropriate manufacturers. The drive motor systems that operate the various functions of the GrTA have been purchased and delivered to ANL. Instrumentation and control hardware has been purchased and delivered to ANL as well. All sodium facing components of the GrTA have been assembled and show proper fit. The three main functions of the GrTA are to raise or lower a gripper head under prototypic fuel handling loads, rotate the gripper head while carrying a fuel handling load, and extend or retract gripper jaws that lock a fuel assembly to the gripper head. All three functions have been demonstrated in air, while under no load. The GrTA project will move forward next fiscal year by completing the initial assembly, incorporating the drive system and I&C, and preparing the assembly for introduction to sodium.
22 GENERAL STUDIES OF NUCLEAR REACTORS↗
Design of advanced turbopump drive turbines for National Launch System application
The aerodynamic design of advanced fuel and oxidizer pump drive turbine systems being developed for application in the main propulsion system of the National Launch System are discussed. The detail design process is presented along with the final baseline fuel and oxidizer turbine configurations. Computed airfoil surface static pressure distributions and flow characteristics are shown. Both turbine configurations employ unconventional high turning blading (approximately 160 deg) and are expected to provide significant cost and performance benefits in comparison with traditional configurations.
Huber, F. W.↗
A TEOM (tm) particulate monitor for comet dust, near Earth space, and planetary atmospheres
Scientific missions to comets, near earth space, and planetary atmospheres require particulate and mass accumulation instrumentation for both scientific and navigation purposes. The Rupprecht & Patashnick tapered element oscillating microbalance can accurately measure both mass flux and mass distribution of particulates over a wide range of particle sizes and loadings. Individual particles of milligram size down to a few picograms can be resolved and counted, and the accumulation of smaller particles or molecular deposition can be accurately measured using the sensors perfected and toughened under this contract. No other sensor has the dynamic range or sensitivity attained by these picogram direct mass measurement sensors. The purpose of this contract was to develop and implement reliable and repeatable manufacturing methods; build and test prototype sensors; and outline a quality control program. A dust 'thrower' was to be designed and built, and used to verify performance. Characterization and improvement of the optical motion detection system and drive feedback circuitry was to be undertaken, with emphasis on reliability, low noise, and low power consumption. All the goals of the contract were met or exceeded. An automated glass puller was built and used to make repeatable tapered elements. Materials and assembly methods were standardized, and controllers and calibrated fixtures were developed and used in all phases of preparing, coating and assembling the sensors. Quality control and reliability resulted from the use of calibrated manufacturing equipment with measurable working parameters. Thermal and vibration testing of completed prototypes showed low temperature sensitivity and high vibration tolerance. An electrostatic dust thrower was used in vacuum to throw particles from 2 x 10(exp 6) g to 7 x 10(exp -12) g in size. Using long averaging times, particles as small as 0.7 to 4 x 10(exp 11) g were weighted to resolutions in the 5 to 9 x 10(exp -13) g range. The drive circuit and optics systems were developed beyond what was anticipated in the contract, and are now virtually flight prototypes. There is already commercial interest in the developed capability of measuring picogram mass losses and gains. One area is contamination and outgassing research, both measuring picogram losses from samples and collecting products of outgassing.
Source record↗
Response of a quantum disordered spin system to a local periodic drive
We consider a one-dimensional spin chain system with quenched disorder and in the presence of a local periodic drive. We study the time evolution of the system in the Floquet basis and evaluate the fidelity susceptibility, which is a measure of how a given state changes under a small perturbation, of states to a weak periodic drive. In this work, we demonstrate that the statistical properties of the fidelity susceptibility over different disorder realizations can be used to identify two phases of the system: (1) the many-body localized phase, in which the susceptibility exhibits long tails while its average value decreases rapidly as disorder increases, and (2) the ergodic phase, in which the susceptibility distribution is narrow and its average value weakly depends on disorder. This distinction in the average value of the susceptibility between the two phases develops readily for systems with ten or more spins. Therefore, recently built networks of qubits subject to a local drive can simulate dynamics of a system in the many-body localization regime. We also show that the spin accumulation speed is correlated with the fidelity susceptibility and can also be used to distinguish the two phases.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Probabilistic Design of a Mars Sample Return Earth Entry Vehicle Thermal Protection System
The driving requirement for design of a Mars Sample Return mission is to assure containment of the returned samples. Designing to, and demonstrating compliance with, such a requirement requires physics based tools that establish the relationship between engineer's sizing margins and probabilities of failure. The traditional method of determining margins on ablative thermal protection systems, while conservative, provides little insight into the actual probability of an over-temperature during flight. The objective of this paper is to describe a new methodology for establishing margins on sizing the thermal protection system (TPS). Results of this Monte Carlo approach are compared with traditional methods.
Dec, John A.↗
Command Generation and Control of Momentum Exchange Electrodynamic Reboost Tethered Satellite
The research completed for this NASA Graduate Student Research Program Fellowship sought to enhance the current state-of-the-art dynamic models and control laws for Momentum Exchange Electrodynamic Reboost satellite systems by utilizing command generation, specifically Input Shaping. The precise control of tethered spacecraft with flexible appendages is extremely difficult. The complexity is magnified many times when the satellite must interact with other satellites as in a momentum exchange via a tether. The Momentum Exchange Electronic Reboost Tether (MXER) concept encapsulates all of these challenging tasks [l]. Input Shaping is a command generation technique that allows flexible spacecraft to move without inducing residual vibration [2], limit transient deflection [3] and utilize fuel-efficient actuation [4]. Input shaping is implemented by convolving a sequence of impulses, known as the input shaper, with a desired system command to produce a shaped input that is then used to drive the system. This process is demonstrated in Figure 1. The shaped command is then use to drive the system without residual vibration while meeting many other performance specifications. The completed work developed tether control algorithms for retrieval. A simple model of the tether response has been developed and command shaping was implemented to minimize unwanted dynamics. A model of a flexible electrodynamic tether has been developed to investigate the tether s response during reboost. Command shaping techniques have been developed to eliminate the tether oscillations and reduce the tether s deflection to pre-specified levels during reboost. Additionally, a model for the spin-up of a tethered system was developed. This model was used in determining the parameters for optimization the resulting angular velocity.
Robertson, Michael J.↗
A Systems Engineering Approach to the Analysis of a Planetary Mission Ground System in Terms of Science Objectives
The most fundamental objective of all planetary missions is to return data. To accomplish this, a spacecraft is fabricated and built, software is planned and coded, and a ground system is designed and implemented. However, a systems engineering approach to determine how the collection of data drives ground system capabilities has received little attention.This paper defines a technique by which science objectives can be quantitatively evaluated. For illustrative purposes, it will be applied to NASA's Cassini Mission. This mission, to be launched in 1997, is an international endeavor designed to orbit Saturn for four years.The results of this systems engineering approach will show which science objectives drive specific ground system capabilities. In addition, this technique can assist system engineers in the selection of the science payload during pre-project mission planning; ground system designers during ground system development and implementation; and operations personnel during the mission.
systems engineering, ground systems↗
Improved Speed Control System for the 87,000 HP Wind Tunnel Drive
This paper describes the design, installation, and integrated systems tests for a new drive motor speed control system which was part of a recent rehab project for the NASA Lewis 8x6 Supersonic Wind Tunnel. The tunnel drive consists of three mechanically-coupled 29,000 HP wound rotor induction motors driving an axial flow compressor. Liquid rheostats are used to vary the impedance of the rotor circuits, thus varying the speed of the drive system. The new design utilizes a distributed digital control system with a dual touch screen CRT operator console to provide alarm monitoring, logging, and trending. The liquid rheostats are driven by brushtype servomotor systems with magnetostrictive linear displacement transducers used for position feedback. The new system achieved all goals for speed variations with load, motor load balance, and control of total power.
Becks, Edward A.↗
Developing Standards for AI/ML Systems in Civil Aviation: Challenges and Barriers
The inability to establish appropriate assurance methods for AI/ML components in safety critical systems leaves us unable to effectively manage the risks and benefits of such systems. It drives cost of development for systems with AI/ML components uneconomically high, it delays the adoption of systems with AI/ML components at scale, and it can result in catastrophic consequences in terms of the safety of systems with AI/ML components. In this presentation we will explore what constitutes sufficient scientific-based evidence to substantiate a safety claim related to an AI/ML component performing a safety-critical function.
AI/ML Standards↗
Goals Analysis Procedure Guidelines for Applying the Goals Analysis Process
One of the key elements to successful project management is the establishment of the "right set of requirements", requirements that reflect the true customer needs and are consistent with the strategic goals and objectives of the participating organizations. A viable set of requirements implies that each individual requirement is a necessary element in satisfying the stated goals and that the entire set of requirements, taken as a whole, is sufficient to satisfy the stated goals. Unfortunately, it is the author's experience that during project formulation phases' many of the Systems Engineering customers do not conduct a rigorous analysis of the goals and objectives that drive the system requirements. As a result, the Systems Engineer is often provided with requirements that are vague, incomplete, and internally inconsistent. To complicate matters, most systems development methodologies assume that the customer provides unambiguous, comprehensive and concise requirements. This paper describes the specific steps of a Goals Analysis process applied by Systems Engineers at the NASA Langley Research Center during the formulation of requirements for research projects. The objective of Goals Analysis is to identify and explore all of the influencing factors that ultimately drive the system's requirements.
Motley, Albert E., III↗
Design and development of a brushless, direct drive solar array reorientation system
This report covers the design and development of the laboratory model, and is essentially a compilation of reports covering the system and its various parts. To enhance completeness, the final report of Phase 1 covering circuit development of the controller is also included. A controller was developed for a brushless, direct-drive, single axis solar array reorientation system for earth-pointed, passively-stabilized spacecraft. A control systems was designed and breadboard circuits were built and tested for performance. The controller is designed to take over automatic control of the array on command after the spacecraft is stabilized in orbit. The controller will orient the solar array to the sun vector and automatically track to maintain proper orientation. So long as the orbit is circular, orientation toward the sun is maintained even though the spacecraft goes into the shadow of the earth. Particular attention was given in the design to limit reaction between the array and the spacecraft.
Jessee, R. D.↗