Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Drag coefficient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Computation of viscous flows in turbomachinery cascades

Analytic and numerical experiments involving the use of the space-marching method for the prediction of the viscous flow field in turbomachinery cascades indicate that the grid lines in the physical domain must be nearly orthogonal in order to arrive at accurate predictions. For staggered cascades, a nonperiodic grid system was used and appropriate approximations were applied in place of the periodicity boundary conditions upstream and downstream of the cascade. Predicted drag coefficient, turning angle, boundary layer momentum thicknesses, and velocity profiles are compared with experimental data. Good agreement is obtained in most cases.

Pouagare, M.↗
NASA NTRS1985

An evaluation of Global Positioning System data for Landsat-4 orbit determination

The Navstar Global Positioning System (GPS) navigation data obtained from an experimental GPS receiver/processor package (GPSPAC) onboard the Landsat-4 spacecraft are evaluated for their accuracy and reliability for use in Landsat-4 orbit determination. Different orbit determination scenarios and methods are considered. The parameters estimated include a subset of three Landsat-4 clock parameters and an atmospheric drag coefficient, in addition to the orbital elements. It is found that Landsat-4 orbit solutions based on delta pseudorange data generally agree with the definitive solutions to the 50-meter level.

Fang, B. T.↗
NASA NTRS1985

Transitional, hypervelocity aerodynamic simulation and scaling in light of recent flight data

Simulation and scaling procedures applicable to maneuvering vehicles for the transitional hypervelocity flow regime are discussed with reference to certain discrepancies between lifting reentry flight data and predicted results. Low-density hypervelocity wind-tunnel data are compared with CFD and in-flight measurements. A general correlation parameter for transitional flow is produced by incorporation of a new geometric term into a form of Reynolds number. It is shown that normalized drag coefficients of a variety of shapes, including spheres, blunt-nosed cones, lifting bodies, and an STS orbiter are correlated by the parameter. A provisional bridging formula for the coefficients is presented.

Potter, J. L.↗
NASA NTRS1985

Computation of flow around a circular cylinder in a supercritical regime

Compressible flows around a circular cylinder in a supercritical regime at Mach number 0.3 have been calculated by using the Beam-Warming-Steger scheme based on the full Navier-Stokes equations with improved accuracy. The flow patterns are visualized extensively to observe the characteristics in this regime. The computations show that the flow at certain Reynolds numbers in a supercritical regime becomes rather steady and irregular with small drag coefficients. This may correspond to the experimental observations that the Strouhal number can not be measured clearly at a certain Reynolds number range in the supercritical regime.

Ishii, K.↗
NASA NTRS1985

Calculation of particle dynamics effects on laser velocimeter data

In order to analytically assess the effects of particle dynamics on laser velocimeter measurements, the particle response to the fluid in which it is entrained must be modeled. The equation of particle motion derived at Arnold Engineering and Development Center (AEDC), is used to model the motion of the particle. The equation is derived from the Navier-Stokes equation under the assumption of unsteady Stokes flow. It should be noted that the Stokes flow eliminates the need for a far field boundary condition, and hence eliminates any normal (lift) forces. To extend the equation to higher particle slip velocities, the Stokes drag is replaced with the particle drag law, modified to include heat transfer effects. The drag coefficient accounts for inertial, rarefaction, compressibility, shape, and heat transfer effects.

Nichols, R. H.↗
NASA NTRS1985

Some design philosophy for reducing the community noise of advanced counter-rotation propellers

Advanced counter-rotation propellers have been indicated as possibly generating an unacceptable amount of noise for the people living near an airport. This report has explored ways to reduce this noise level, which is treated as being caused by the interaction of the upstream propeller wakes and vortices with the downstream propeller. The noise reduction techniques fall into two categories: (1) reducing the strength of the wakes and vortices, and (2) reducing the response of the downstream blades to them. The noise from the wake interaction was indicated as being reduced by increased propeller spacing and decreased blade drag coefficient. The vortex-interaction noise could be eliminated by having the vortex pass over the tips of the downstream blade, and it could be reduced by increased spacing or decreased initial circulation. The downstream blade response could be lessened by increasing the reduced frequency parameter omega or by phasing of the response from different sections to have a mutual cancellation effect. Uneven blade to blade spacing for the downstream blading was indicated as having a possible effect on the annoyance of counter-rotation propeller noise. Although there are undoubtedly additional methods of noise reduction not covered in this report, the inclusion of the design methods discussed would potentially result in a counter-rotation propeller that is acceptably quiet.

Dittmar, J. H.↗
NASA NTRS1986

In-flight measurements of wing ice shapes and wing section drag increases caused by natural icing conditions

Aircraft icing flight research was performed in natural icing conditions with a twin engine computer type STOL aircraft. In-flight measurements were made of the icing cloud environment, the shape of the ice accretion on the wing, and the corresponding increase in the wing section drag. Results are presented for three icing encounters. On one flight, the wing section drag coefficient increased 35 percent over the uniced baseline for cruise conditions while a 43 percent increase was observed at an aircraft angle of attack of 6.2 degrees.

Mikkelsen, K.↗
NASA NTRS1986

Self-adaptive difference method for the effective solution of computationally complex problems of boundary layer theory

An implicit difference procedure for the solution of equations for a chemically reacting hypersonic boundary layer is described. Difference forms of arbitrary error order in the x and y coordinate plane were used to derive estimates for discretization error. Computational complexity and time were minimized by the use of this difference method and the iteration of the nonlinear boundary layer equations was regulated by discretization error. Velocity and temperature profiles are presented for Mach 20.14 and Mach 18.5; variables are velocity profiles, temperature profiles, mass flow factor, Stanton number, and friction drag coefficient; three figures include numeric data.

Schoenauer, W.↗
NASA NTRS1986

Turbulent dispersion of the icing cloud from spray nozzles used in icing tunnels

To correctly simulate flight in natural icing conditions, the turbulence in an icing simulator must be as low as possible. But some turbulence is required to mix the droplets from the spray nozzles and achieve an icing cloud of uniform liquid water content. The goal for any spray system is to obtain the widest possible spray cloud with the lowest possible turbulence in the test section of a icing tunnel. This investigation reports the measurement of turbulence and the three-dimensional spread of the cloud from a single spray nozzle. The task was to determine how the air turbulence and cloud width are affected by spray bars of quite different drag coefficients, by changes in the turbulence upstream of the spray, the droplet size, and the atomizing air. An ice accretion grid, located 6.3 m downstream of the single spray nozzle, was used to measure cloud spread. Both the spray bar and the grid were located in the constant velocity test section. Three spray bar shapes were tested: the short blunt spray bar used in the NASA Lewis Icing Research Tunnel, a thin 14.6 cm chord airfoil, and a 53 cm chord NACA 0012 airfoil. At the low airspeed (56 km/hr) the ice accretion pattern was axisymmetric and was not affected by the shape of the spray bar. At the high airspeed (169 km/hr) the spread was 30 percent smaller than at the low airspeed. For the widest cloud the spray bars should be located as far upstream in the low velocity plenum of the icing tunnel. Good comparison is obtained between the cloud spread data and predicitons from a two-dimensional cloud mixing computer code using the two equation turbulence (k epsilon g) model.

Marek, C. J.↗
NASA NTRS1986

Transonic Navier-Stokes wing solutions using a zonal approach. Part 2: High angle-of-attack simulation

A computer code is under development whereby the thin-layer Reynolds-averaged Navier-Stokes equations are to be applied to realistic fighter-aircraft configurations. This transonic Navier-Stokes code (TNS) utilizes a zonal approach in order to treat complex geometries and satisfy in-core computer memory constraints. The zonal approach has been applied to isolated wing geometries in order to facilitate code development. Part 1 of this paper addresses the TNS finite-difference algorithm, zonal methodology, and code validation with experimental data. Part 2 of this paper addresses some numerical issues such as code robustness, efficiency, and accuracy at high angles of attack. Special free-stream-preserving metrics proved an effective way to treat H-mesh singularities over a large range of severe flow conditions, including strong leading-edge flow gradients, massive shock-induced separation, and stall. Furthermore, lift and drag coefficients have been computed for a wing up through CLmax. Numerical oil flow patterns and particle trajectories are presented both for subcritical and transonic flow. These flow simulations are rich with complex separated flow physics and demonstrate the efficiency and robustness of the zonal approach.

Chaderjian, N. M.↗
NASA NTRS1985

The atmospheric heat source over the Tibetan plateau May-August 1979

Estimates of the time and space variability of the atmospheric heat source over Tibet are presented for the summer of 1979. These estimates rely on new data from the People's Republic of China allowing a better assessment of the surface heat fluxes, and on new satellite data from Nimbus-7 giving the radiation balance at the top of the atmosphere. The estimates of the atmospheric heat source turned out to be considerably smaller than those provided earlier in the literature, mainly because of different assumptions of the drag coefficient. The atmospheric heat source over Tibet is mainly modulated by the release of latent heat. Over the southeastern and southwestern plateau regions the heat source appears to be in phase with the precipitation yield of the Indian summer monsoon, whereas central Tibet reveals an out-of-phase behavior. Over western Tibet there appears to be hardly any net import of moisture from outside the region, whereas the maintenance of the hydrological cycle over eastern Tibet requires moisture flux convergence from outside the region of up to 40 percent of the mean rainfall, in agreement with what is known about the surface hydrology of Tibet.

Chen, L.↗
NASA NTRS1986

High-speed aerodynamics of several blunt-cone configurations

The experimental techniques and results from NASA Ames research into the aerodynamics of blunt shapes are described. Two facilities are used: the Hypersonic Free Flight Aerodynamic Facility (HFFAF) and the Pressurized Ballistic Range (PBR). The HFFAF features a 23 m test section through which projectiles can be fired by light-gas guns to achieve velocities up to 9 km/sec in pressures from 1 atm down to 20 microns Mg. Aerodynamic flight data are recorded with shadowgraphs. The 62 m long PBR, with 24 orthogonal spark shadowgraph stations, allows testing in up to 6 atm pressures but with only half the velocity of the HFFAF. Tests have been performed on the Galileo probe to be dropped into the Jovian atmosphere. The Galileo data for a 45 deg cone probe have been similar to Pioneer Venus probe data. Ballistic data are presently being obtained for the probe at Re below 1000, when the drag coefficients are expected to increase dramatically as the probe enters the Jovian atmosphere and begins braking from 4700 m/s speed. Sample test data from an OTV which can change orbits through aerodynamic maneuvers and for several asymmetric configurations ae also provided.

Intrieri, P. F.↗
NASA NTRS1985

The atmospheric heat budget over the western part of the Tibetan plateau during MONEX, 1979

The heat sources over the western part of the Tibetan Plateau for the period from May 19-August 31, 1979 are calculated. The use of the direct method to compute the total atmospheric heat source is examined. The values for the heat source over western, northwestern, and southwestern Tibet are presented. It is concluded that the atmospheric heat source is smaller during the summer than had been previously estimated; this difference is due to reduced drag coefficients. The northwestern and southwestern heat source values are compared, and it is observed that the northwestern heat source is independent on sensible heating and the southwestern heat source relates to the latent heat (LH). The calculated values correlate with the surface hydrology of these two regions. Time series analyses of the heat source components over the southwestern region reveal that LH is the primary modulator of the total atmospheric heat sources. The relation between the vertical heat distribution and Indian summer monsoons is studied.

Feng, Z.↗
NASA NTRS1986

Ice banding as a response of the coupled ice-ocean system to temporally varying winds

This study models formation of ice bands in the marginal ice zones. A one-dimensional coupled ice-ocean model is used in which the ice model is coupled to a reduced gravity ocean model through interfacial stresses. The internal ice stresses are important only at high ice concentrations (90-100 percent); otherwise, the main balance for the ice motion is between the air-ice stress and the ice-water stress, i.e., free drift. The drag coefficients were chosen so that the air-ice momentum flux is 3 times greater than the air-ocean momentum flux. Thus the Ekman transport is larger under the ice than in the open water, so that winds parallel to the ice edge, with the ice on the right, produce upwelling. The upwelling simulation was extended to include temporally varying forcing, which was chosen to vary sinusoidally with a 4-day period. This forcing resembles successive cyclone passings perpendicular to the ice edge. When the oceanic upper layer was thin, which means that the dynamics are strongly nonlinear, the ice bands were formed. The up/downwelling signals do not disappear in wind reversals because of nonlinear advection. This leads to convergences and divergences in oceanic and ice velocities that manifest themselves as ice banding. At least one wind reversal is needed to produce one ice band.

Hakkinen, S.↗
NASA NTRS1986

Supersonic airfoil optimization

A procedure for the optimization of supersonic airfoils is presented. A nonlinear, full-potential solver (NCOREL) is coupled with a numerical optimizer (CONMIN). The NCOREL code is a three-dimensional supersonic marching method, however, only two-dimensional (conical) results are used for the airfoil problem. Each airfoil evaluated in the NCOREL aerodynamic code is composed of a linear combination of user-specified basis airfoils. The weighting factors of the basis airfoils plus the angle of attack form the design variable vector. The inviscid drag coefficient is minimized subject to lift and crossflow Mach number gradient constraints. The optimization strategy is found to be extremely important for the efficient determination of an optimum airfoil.

Pittman, J. L.↗
NASA NTRS1986

Flight test report of the NASA icing research airplane: Performance, stability, and control after flight through natural icing conditions

Flight test results are presented documenting the effect of airframe icing on performance and stability and control of a NASA DHC-6 icing research aircraft. Kohlman System Research, Inc., provided the data acquisition system and data analysis under contract to NASA. Performance modeling methods and MMLE techniques were used to determine the effects of natural ice on the aircraft. Results showed that ice had a significant effect on the drag coefficient of the aircraft and a modest effect on the MMLE derived longitudinal stability coefficients (code version MMLE). Data is also presented on asymmetric power sign slip maneuvers showing rudder floating characteristics with and without ice on the vertical stabilizer.

Jordan, J. L.↗
NASA NTRS1986

Analysis of the inflow and air-sea interactions in Hurricane Frederic (1979)

An unusually large amount of aircraft, rawinsonde, satellite, ship and buoy data from hurricane Frederic (1979) are composited over a 40 hr period. These are combined with Frank's (1984) analysis of Frederic's core and Powell's (1982) surface wind analysis to analyze Frederic's three dimensional low level structure between the storm center and a radius of 10 deg. latitude. The analysis is improved significantly by determining the levels at which low level cloud motion winds (CMW's) are in the best agreement with verification wind data and then adjusting the winds to uniform analysis levels. Due to the unusually good low level wind resolution afforded by this data set, it is possible to obtain kinematically derived fields of vorticity, divergence and vertical velocity. These analyses are observed to be internally consistent and should prove useful for future analysis. Analysis of Frederic's surface to 560 m angular momentum budget beyond 2 deg. radius indicates that surface drag coefficients increase slightly with increasing radius and decreasing wind speed. Estimates of storm rainfall obtained by performing a moisture budget between the surface and the top of the inflow layer show that most storm rainfall falls inside about 4 deg. radius and that substantial underestimation of storm rainfall occurs when all low level CMW's are assigned to 560 m.

Kaplan, J.↗
NASA NTRS1986

Transonic Navier-Stokes wing solutions using a zonal approach. Part 2: High angle-of-attack simulation

A computer code is under development whereby the thin-layer Reynolds-averaged Navier-Stokes equations are to be applied to realistic fighter aircraft configurations. This transonic Navier-Stokes code (TNS) utilizes a zonal approach in order to treat complex geometries and satisfy in-core computer memory constraints. The zonal approach was applied to isolated wing geometries in order to facilitate code development. The TNS finite difference algorithm, zonal methodology, and code validation with experimental data is addressed. Also addressed are some numerical issues such as code robustness, efficiency, and accuracy at high angles of attack. Special free-stream-preserving metrics proved an effective way to treat H-mesh singularities over a large range of severe flow conditions, including strong leading edge flow gradients, massive shock induced separation, and stall. Furthermore, lift and drag coefficients were computed for a wing up through CLmax. Numerical oil flow patterns and particle trajectories are presented both for subcritical and transonic flow. These flow simulations are rich with complex separated flow physics and demonstrate the efficiency and robustness of the zonal approach.

Chaderjian, Neal M.↗