SEARCH · Engineering Papers

Results for “Digital signal processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

All sources NASA NTRS DOE OSTI

NASA NTRS1975

Performance of quasi-optimum digital FM demodulators for fading channels

This paper deals with the problem of digital demodulation of FM signals transmitted over Rayleigh and Rician fading channels. The Rayleigh and Rician fading channels are represented by two quadrature multiplicative nonzero mean white Gaussian processes in addition to an additive zero-mean white Gaussian noise. Quasi-optimum digital baseband demodulation algorithms using various nonlinear estimation techniques are derived. The digital demodulator structures are then simulated on a digital computer for an FM system with first order message spectrum for various values of the parameters for Rayleigh and Rician channels.

Dharamsi, M. T.↗

NASA NTRS2004

DSP Implementation of the Multiscale Retinex Image Enhancement Algorithm

The Retinex is a general-purpose image enhancement algorithm that is used to produce good visual representations of scenes. It performs a non-linear spatial/ spectral transform that synthesizes strong local contrast enhancement and color constancy. A real-time, video frame rate implementation of the Retinex is required to meet the needs of various potential users. Retinex processing contains a relatively large number of complex computations, thus to achieve real-time performance using current technologies requires specialized hardware and software. In this paper we discuss the design and development of a digital signal processor (DSP) implementation of the Retinex. The target processor is a Texas Instruments TMS320C6711 floating point DSP. NTSC video is captured using a dedicated frame grabber card, Retinex processed, and displayed on a standard monitor. We discuss the optimizations used to achieve real-time performance of the Retinex and also describe our future plans on using alternative architectures.

Hines, Glenn D.↗

NASA NTRS2011

Architecture for a 1-GHz Digital RADAR

An architecture for a Direct RF-digitization Type Digital Mode RADAR was developed at GSFC in 2008. Two variations of a basic architecture were developed for use on RADAR imaging missions using aircraft and spacecraft. Both systems can operate with a pulse repetition rate up to 10 MHz with 8 received RF samples per pulse repetition interval, or at up to 19 kHz with 4K received RF samples per pulse repetition interval. The first design describes a computer architecture for a Continuous Mode RADAR transceiver with a real-time signal processing and display architecture. The architecture can operate at a high pulse repetition rate without interruption for an infinite amount of time. The second design describes a smaller and less costly burst mode RADAR that can transceive high pulse repetition rate RF signals without interruption for up to 37 seconds. The burst-mode RADAR was designed to operate on an off-line signal processing paradigm. The temporal distribution of RF samples acquired and reported to the RADAR processor remains uniform and free of distortion in both proposed architectures. The majority of the RADAR's electronics is implemented in digital CMOS (complementary metal oxide semiconductor), and analog circuits are restricted to signal amplification operations and analog to digital conversion. An implementation of the proposed systems will create a 1-GHz, Direct RF-digitization Type, L-Band Digital RADAR--the highest band achievable for Nyquist Rate, Direct RF-digitization Systems that do not implement an electronic IF downsample stage (after the receiver signal amplification stage), using commercially available off-the-shelf integrated circuits.

Mallik, Udayan↗

NASA NTRS1982

A discussion of image sharpness

The image sharpness problem is discussed in terms of a scene which is viewed by a sensor. The sensor has some sort of function which is a nonpoint observing function, and it's a function that gathers energy from some region around a point in the scene. That energy is integrated and is contributed to each point or each sample that is taken of the scene. The samples become the pixels, and the pixels are assembled together into the digital image. Each one has some blurr or some of what is called the point's spread function creating the value of information or data that is seen in each pixel. Then the sensor and electronic part of the system acts on that signal out of the sensor and perhaps adds more blurring, more loss of resolution to the system. Finally, sampling and quantization of the data produce their effects. The signal is sampled at some rate and the digital image is created from that. The sampling or digitizing process puts the continuous voltage into a number of discrete binary levels, and another error is introduced there.

Anuta, P.↗

NASA NTRS1988

The U.S. Sarsat geosynchronous experiment - Ground processor description and test results

The development of a specialized digital signal processor, the Geosynchronous Signal Processor (GSP), for short beacon burst signal detection and demodulation is described. The processing is based on fast Fourier Transform techniques for detection and message integration on the respective message bursts for demodulation. The GSP is based on array processor technology; it is designed to yield an ultimate capacity of 50-75 simultaneous beacon transmissions within the nominal 20 KHz bandwidth centered at 406.025 MHz.

Flikkema, P. G.↗

NASA NTRS2006

User Interactive Software for Analysis of Human Physiological Data

Ambulatory physiological monitoring has been used to study human health and performance in space and in a variety of Earth-based environments (e.g., military aircraft, armored vehicles, small groups in isolation, and patients). Large, multi-channel data files are typically recorded in these environments, and these files often require the removal of contaminated data prior to processing and analyses. Physiological data processing can now be performed with user-friendly, interactive software developed by the Ames Psychophysiology Research Laboratory. This software, which runs on a Windows platform, contains various signal-processing routines for both time- and frequency- domain data analyses (e.g., peak detection, differentiation and integration, digital filtering, adaptive thresholds, Fast Fourier Transform power spectrum, auto-correlation, etc.). Data acquired with any ambulatory monitoring system that provides text or binary file format are easily imported to the processing software. The application provides a graphical user interface where one can manually select and correct data artifacts utilizing linear and zero interpolation and adding trigger points for missed peaks. Block and moving average routines are also provided for data reduction. Processed data in numeric and graphic format can be exported to Excel. This software, PostProc (for post-processing) requires the Dadisp engineering spreadsheet (DSP Development Corp), or equivalent, for implementation. Specific processing routines were written for electrocardiography, electroencephalography, electromyography, blood pressure, skin conductance level, impedance cardiography (cardiac output, stroke volume, thoracic fluid volume), temperature, and respiration

Cowings, Patricia S.↗

NASA NTRS2004

DSP Implementation of the Retinex Image Enhancement Algorithm

The Retinex is a general-purpose image enhancement algorithm that is used to produce good visual representations of scenes. It performs a non-linear spatial/spectral transform that synthesizes strong local contrast enhancement and color constancy. A real-time, video frame rate implementation of the Retinex is required to meet the needs of various potential users. Retinex processing contains a relatively large number of complex computations, thus to achieve real-time performance using current technologies requires specialized hardware and software. In this paper we discuss the design and development of a digital signal processor (DSP) implementation of the Retinex. The target processor is a Texas Instruments TMS320C6711 floating point DSP. NTSC video is captured using a dedicated frame-grabber card, Retinex processed, and displayed on a standard monitor. We discuss the optimizations used to achieve real-time performance of the Retinex and also describe our future plans on using alternative architectures.

Hines, Glenn↗

NASA NTRS1971

A comparison of orthogonal transformations for digital speech processing.

Discrete forms of the Fourier, Hadamard, and Karhunen-Loeve transforms are examined for their capacity to reduce the bit rate necessary to transmit speech signals. To rate their effectiveness in accomplishing this goal the quantizing error (or noise) resulting for each transformation method at various bit rates is computed and compared with that for conventional companded PCM processing. Based on this comparison, it is found that Karhunen-Loeve provides a reduction in bit rate of 13.5 kbits/s, Fourier 10 kbits/s, and Hadamard 7.5 kbits/s as compared with the bit rate required for companded PCM. These bit-rate reductions are shown to be somewhat independent of the transmission bit rate.

Campanella, S. J.↗

NASA NTRS1989

A model for the analysis of fault-tolerant signal processing architectures

This paper develops a new model, using matrices, for the analysis of fault-tolerant multiprocessor systems. The relationship between processors computing useful data, the output data, and the check processors is defined in terms of matrix entries. Unlike the matrix-based models proposed previously for the analysis of digital systems, this model uses only numerical computations rather than logical operations for the analysis of a system. Algorithms to evaluate the fault detection and location capability of the system are proposed which are much less complex than the existing ones. The new model is used to analyze some fault-tolerant architectures proposed for signal-processing applications.

Nair, V. S. S.↗

NASA NTRS1991

Digital Signal Conditioning for Flight Test Instrumentation

This volume in the AGARD Flight Instrumentation Series provides flight test instrumentation engineers with an introduction to digital measurement processes on aircraft. Flight test instrumentation systems are rapidly evolving from analog-intensive to digital-intensive systems, including the use of onboard digital computers. Topics include measurements that are digital in origin, as well as sampling, encoding, transmitting, and storing of data. Particular emphasis is placed on modern avionic data bus architectures and what to be aware of when extracting data from them. Examples of data extraction techniques are given. Tradeoffs between digital logic families, trends in digital development, and design testing techniques are discussed. An introduction to digital filtering is also covered.

Data acquisition↗

NASA NTRS1989

Processing SAR Images On Board

Synthetic-aperture radar (SAR) processor operates aboard moving radar platform, turning raw signal data into images of scanned terrain. In conventional SAR systems, raw data either transmitted to stations on ground or recorded on magnetic tape by high-density digital recorders for subsequent processing on ground. Advantages include making SAR images available immediately and processed data transmitted or recorded only one-fifth as voluminous as raw data. Onboard image compression reduces volume of data even further.

Liu, Kuang Y.↗

NASA NTRS1993

Modeling of the ground-to-SSFMB link networking features using SPW

This report describes the modeling and simulation of the networking features of the ground-to-Space Station Freedom manned base (SSFMB) link using COMDISCO signal processing work-system (SPW). The networking features modeled include the implementation of Consultative Committee for Space Data Systems (CCSDS) protocols in the multiplexing of digitized audio and core data into virtual channel data units (VCDU's) in the control center complex and the demultiplexing of VCDU's in the onboard baseband signal processor. The emphasis of this work has been placed on techniques for modeling the CCSDS networking features using SPW. The objectives for developing the SPW models are to test the suitability of SPW for modeling networking features and to develop SPW simulation models of the control center complex and space station baseband signal processor for use in end-to-end testing of the ground-to-SSFMB S-band single access forward (SSAF) link.

Watson, John C.↗

NASA NTRS1988

Robot Gripper With Signal Processing

Single-chip computer and sensor-circuit chips preprocess sensor data. Self-contained circuitry combines sensor signals for serial digital transmission. Gripping surfaces crossed with grooves for grasping differently shaped objects. Gripper cavities house sensors and preprocessing circuitry. Sensors and preprocessing circuitry in robot gripper reduce amount of data being transmitted between robot controller and gripper. Placement in gripper reduces signal delays and vulnerability to electromagnetic interference.

Killion, Richard R.↗

NASA NTRS1980

Data acquisition and analysis in the DOE/NASA Wind Energy Program

Four categories of data systems, each responding to a distinct information need are presented. The categories are: control, technology, engineering and performance. The focus is on the technology data system which consists of the following elements: sensors which measure critical parameters such as wind speed and direction, output power, blade loads and strains, and tower vibrations; remote multiplexing units (RMU) mounted on each wind turbine which frequency modulate, multiplex and transmit sensor outputs; the instrumentation available to record, process and display these signals; and centralized computer analysis of data. The RMU characteristics and multiplexing techniques are presented. Data processing is illustrated by following a typical signal through instruments such as the analog tape recorder, analog to digital converter, data compressor, digital tape recorder, video (CRT) display, and strip chart recorder.

Neustadter, H. E.↗

NASA NTRS1988

Fiber optic sensing systems using high frequency resonant sensing heads with intensity sensors

Optical fibers have an inherent capability of transmitting high bandwidth analog and digital signals. To apply this property of fiber optics to remote sensing, special sensing heads as well as signal processing electronics have to be developed. In systems employing intensity modulating sensors, there is also a need for a referencing technique to compensate for changes in the transmission of the connecting fibers and light source intensity. Fiber optic sensing systems incorporated in sensing heads of a special configuration are discussed. Different modes of operation as well as resonant conditions are explained. Theoretical and experimental analyses are also given.

Adamovsky, Grigory↗

NASA NTRS1989

Fiber optic sensing systems using high frequency resonant sensing heads with intensity sensors

Adamovsky, Grigory↗

NASA NTRS1989

Multiplexing electro-optic architectures for advanced aircraft integrated flight control systems

This report describes the results of a 10 month program sponsored by NASA. The objective of this program was to evaluate various optical sensor modulation technologies and to design an optimal Electro-Optic Architecture (EOA) for servicing remote clusters of sensors and actuators in advanced aircraft flight control systems. The EOA's supply optical power to remote sensors and actuators, process the modulated optical signals returned from the sensors, and produce conditioned electrical signals acceptable for use by a digital flight control computer or Vehicle Management System (VMS) computer. This study was part of a multi-year initiative under the Fiber Optic Control System Integration (FOCSI) program to design, develop, and test a totally integrated fiber optic flight/propulsion control system for application to advanced aircraft. Unlike earlier FOCSI studies, this program concentrated on the design of the EOA interface rather than the optical transducer technology itself.

Seal, D. W.↗

NASA NTRS2005

Re-Configurable Electronics Characterization under Extreme Thermal Environment

The need for reconfigurable electronics is driven by requirements to survive longer missions and harsher environments. It is possible to compensate for degradations in Extreme Environments (EE). EE has effect on electronics: circuits are designed to exploit device characteristics and when a certain temperature or radiation range is exceeded the circuit function gradually degrades. It is possible to employ Hardening by reconfiguration (HBR) to mitigate drifts, degradation, or damage on electronic devices in EE by using reconfigurable devices and an adaptive self-reconfiguration of circuit topology. In this manner degraded components can be salvaged, and completely damaged components can be bypassed. The challenge of conventional design is replaced with that of designing a recover process that automatically performs the (re) design in place of the designer. The objective of testing a Digital Signal Processor (DSP) under the extreme temperatures was to determine the lowest temperature at which the DAP can operate. The objective of testing a Xilinx VirtexII Pro FPGA board was to initially find our whether the evaluation board and the FPGA would survive and continue at temperature ranges from -180 C, and 120 C. The Virtex II functioned correctly at the temperatures tested. The next test was done on the GM-C filter building block using the same temperature range as the Virtex II. The current lower and upper limits were shown to be reduced as the temperature gets lower. The device function can be recovered by increasing the Vb from .08V to .85V. The negative and positive saturation voltages increases as the temperature gets higher. The function of the device can be recovered by decreasing the Vb from .8V to around .75V. The next test was performed to test the recovery of the GmC low pass filter through Vb in a filter circuit. The test indicate that bias voltage control adjustment is an efficient mechanism for circuit recovery at extreme temperatures.

reliability↗