Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Diffusion equation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

On the transport and propagation of relativistic electrons in galaxies

Analytic solutions to the time-dependent equation describing the transport of relativistic electrons that are being convected and diffused, and may be either gaining or losing energy, are described. The calculations yield a body of solutions from which specific ones can be chosen for the modelling of synchrotron radiation in the Galaxy and in other galaxies. The solutions allow for (1) spatially varying convection velocity; (2) an energy and spatially dependent diffusion coefficient; (3) adiabatic acceleration effects; (4) a term describing spatially dependent synchrotron loss and/or Fermi acceleration; (5) an injection source for the electrons that may be impulsive, steady-state, or variable-injection; (6) a spatial injection or spatially more diffuse source; (7) arbitrary energy dependence of the injection source; and (8) spatial and energy boundaries where the spatial or energy form of the convection, diffusion, and energy supply terms in the basic equation can change character.

Lerche, I.↗
NASA NTRS1952

An active particle diffusion theory of flame quenching for laminar flames / Dorothy M. Simon and Frank E. Belles

An equation for quenching distance based on the destruction of chain carriers by the surface is derived. The equation expresses the quenching distance in terms of the diffusion coefficients and partial pressures of the chain carriers and gas phase molecules, the efficiency of the surface as a chain breaker, the total pressure of the mixture, and a constant which depends on the geometry of the quenching surface. Quenching distances measured by flashback for propane-air flames are shown to be consistent with the mechanism. The derived equation is used with the lean inflammability limit and a rate constant calculated from burning velocity data to estimate quenching distances for propane-air (hydrocarbon lean) flames satisfactorily.

Simon, Dorothy M↗
NASA NTRS2016

New Approaches to Inferences for Steep-Sided Domes on Venus

New mathematical approaches for the relaxation and emplacement of viscous lava domes are presented and applied to steep-sided domes on Venus. A similarity solution approach is applied to the governing equation for fluid flow in a cylindrical geometry for two distinct scenarios. In the first scenario, dome relaxation is explored assuming a constant volume of fluid (i.e. lava) has been rapidly emplaced onto the surface. Cooling of lava is represented by a time-variable viscosity and singularities inherent in previous models for dome relaxation have been eliminated. At the onset of relaxation, bulk dynamic viscosities lie in the range between 10(exp 10) - 10(exp 16) Pa s, consistent with basaltic-andesite to rhyolitic compositions. Plausible relaxation times range from 5 to 5000 years, depending on initial lava viscosity. The first scenario, however, is only valid during the final stages of dome relaxation and does not consider the time taken for lava to be extruded onto the surface. In the second scenario, emplacement and growth of a steep-sided dome is considered when the volume of lava on the surface increases over time (i.e. time-variable volume approach). The volumetric flow rate may depend on an arbitrary power of the dome thickness, thus embracing Newtonian as well as other rheologies for describing terrestrial and planetary mass flows. The approach can be used to distinguish between basic flow rate models for fluid emplacement. The formalism results in radial expansion of a dome proportional to t(sup 1/2), consistent with the diffusive nature of the governing equation. The flow at the front is shown to thicken as the front advances for a constant rate of lava supply. Emplacement times are intimately correlated with the bulk rheology. Comparison of the theoretical profiles with the shape of a typical dome on Venus indicates that a Newtonian bulk rheology is most appropriate, consistent with prior studies. However, results here suggest a bulk dynamic viscosity of 10(exp 12) - 10(exp 13) Pa s and emplacement times of approximately 2-16 years. Both scenarios investigated give emplacement times significantly less than prior estimates and compositions consistent with basaltic andesite.

steep-sided domes↗
NASA NTRS1971

Solutions for Reacting and Nonreacting Viscous Shock Layers with Multicomponent Diffusion and Mass Injection

Numerical solutions are presented for the viscous shocklayer equations where the chemistry is treated as being either frozen, equilibrium, or nonequilibrium. Also the effects of the diffusion model, surface catalyticity, and mass injection on surface transport and flow parameters are considered. The equilibrium calculations for air species using multicomponent: diffusion provide solutions previously unavailable. The viscous shock-layer equations are solved by using an implicit finite-difference scheme. The flow is treated as a mixture of inert and thermally perfect species. Also the flow is assumed to be in vibrational equilibrium. All calculations are for a 45 deg hyperboloid. The flight conditions are those for various altitudes and velocities in the earth's atmosphere. Data are presented showing the effects of the chemical models; diffusion models; surface catalyticity; and mass injection of air, water, and ablation products on heat transfer; skin friction; shock stand-off distance; wall pressure distribution; and tangential velocity, temperature, and species profiles.

Moss, J. N.↗
NASA NTRS1974

User's instructions for the 41-node thermoregulatory model (steady state version)

A user's guide for the steady-state thermoregulatory model is presented. The model was modified to provide conversational interaction on a remote terminal, greater flexibility for parameter estimation, increased efficiency of convergence, greater choice of output variable and more realistic equations for respiratory and skin diffusion water losses.

Leonard, J. I.↗
NASA NTRS1978

Closure of a kinetic model of plasma in strong turbulence by relaxation

A Fokker-Planck kinetic equation for a turbulent plasma is derived by a repeated cascade decomposition. Calculation of the propagator and the kinetic equation determine the transport coefficients (diffusivity and turbulent viscosity) by means of a closure based on a relaxation procedure governing the approach to equilibrium. The k to the minus third power spectral law is obtained, which governs the coupling between the velocity and the electrostatic field fluctuations.

Tchen, C. M.↗
NASA NTRS1979

A kinetic approach to compressible turbulence

A kinetic theory of strong turbulence is developed by decomposing fluctuation of distribution function into scaled components, or ranks, to represent three transport processes: macroscopic evolution, transport property and relaxation. Closure is obtained by formulating a relaxation process for the approach of eddy diffusivity to equilibrium. The kinetic equation is solved and three transport functions of turbulence in adiabatic gas are derived: two transfer functions describe turbulent mode transfer, and a coupling function describes the build-up of kinetic energy at the expense of internal energy. The energy balance in the inertial subrange of homogeneous and isotropic turbulence in an adiabatic gas yields a k to the -3rd law, in agreement with numerical computations from one dimensional model of compressible turbulence.

Tchen, C. M.↗
NASA NTRS1981

Relationships between diffuse reflectance and vegetation canopy variables based on the radiative transfer theory

Out of the lengthy original expression of the diffuse reflectance formula, simple working equations were derived by employing characteristic parameters, which are independent of the canopy coverage and identifiable by field observations. The typical asymptotic nature of reflectance data that is usually observed in biomass studies was clearly explained. The usefulness of the simplified equations was demonstrated by the exceptionally close fit of the theoretical curves to two separately acquired data sets for alfalfa and shortgrass prairie canopies.

Park, J. K.↗
NASA NTRS1982

A simple finite difference procedure for the vortex controlled diffuser

A simple prediction procedure for sudden expansion incompressible flows is developed and applied to the vortex controlled diffuser. Transient Navier-Stokes equations of an incompressible fluid are solved by means of their associated finite difference equations in terms of the primitive pressure velocity variables. A computer code is developed using a laminar flow simulation with free slip or no slip wall boundary conditions. In addition, predicted results confirm that effectiveness increases with increases in duct length and bleed flow rate

Busnaina, A. A.↗
NASA NTRS1982

Beam-plasma instability in the presence of low-frequency turbulence

General equations are derived for a linear beam-plasma instability in the presence of low-frequency turbulence. Within a 'quasi-linear' statistical approximation, these equations contain Langmuir wave scattering, diffusion, resonant and nonresonant anomalous absorption, and a 'plasma laser' effect. It is proposed that naturally occurring density irregularities in the solar wind may stabilize the beam-unstable Langmuir waves which occur during type III solar emissions.

Goldman, M. V.↗
NASA NTRS1983

Transport properties of oxygen

Tables of viscosity, thermal conductivity, and thermal diffusivity of oxygen as a function of temperature and pressure from the triple point to 320 K and at pressures to 100 MPa are presented. Auxiliary tables in engineering units are also given. Viscosity and thermal conductivity are calculated from published correlations. Density and specific heat at constant pressure, required to calculate thermal diffusivity, are obtained from an equation of state. The Prandtl number can be obtained quite easily from the values tabulated.

Roder, H. M.↗
NASA NTRS1992

A burst from a thermonuclear runaway on an ONeMg white dwarf

Studies which examine the consequences of accretion, at rates of 10(exp -9) solar mass/yr and 10(exp -10) solar mass/yr, onto an ONeMg white dwarf with a mass of 1.35 solar masses are performed. In these studies, a Lagrangian, hydrodynamic, one-dimensional computer code was used. The code now includes a network with 89 nuclei up to Ca-40, elemental diffusion, new opacities, and new equation of state. The initial abundance distribution corresponded to a mixture that was enriched to either 25, 50, or 75 percent in products of carbon burning. The remaining material in each case is assumed to have a solar composition. The evolution of the thermonuclear runaway in the 1.35 solar mass white dwarf, with M = 10(exp -9) solar mass, produced peak temperatures in the shell source exceeding 300 million degrees. The sequence produced significant amounts of Na-22 from proton captures onto Ne-20 and significant amounts of Al-26 from proton captures on Mg-24. This sequence ejected 5.2 x 10(exp -6) solar mass moving with speeds from approximately 100 km/s to 2300 km/s. When the mass accretion rate was decreased to 10(exp -10) solar mass, the resulting thermonuclear runaway produced a shock that moved through the outer envelope of the white dwarf and raised the surface luminosity to L greater than 10(exp 7) solar luminosity and the effective temperature to values exceeding 10(exp 7) K. The interaction of the material expanding from off of the white dwarf with the accretion disk should produce a burst of gamma-rays.

Starrfield, S.↗
NASA NTRS1992

The structure of premixed particle-cloud flames

The structure of premixed flames propagating in combustible systems, containing uniformly distributed volatile fuel particles, in an oxidizing gas mixture, is analyzed. It is presumed that the fuel particles vaporize first to yield a gaseous fuel of known chemical structure, which is subsequently oxidized in the gas phase. The analysis is performed in the asymptotic limit, where the value of the characteristic Zeldovich number, based on the gas-phase oxidation of the gaseous fuel is large, and for values of phi(u) greater than or equal to 1.0, where phi(u) is the equivalence ratio based on the fuel available in the fuel particles. The structure of the flame is presumed to consist of a preheat vaporization zone where the rate of the gas-phase chemical reaction is small, a reaction zone where convection and the rate of vaporization of the fuel particles are small and a convection zone where diffusive terms in the conservation equations are small. For given values phi(u) the analysis yields results for the burning velocity and phi(g) where phi(g) is the effective equivalence ratio in the reaction zone. The analysis shows that even though phi(u) greater than or equal to 1.0, for certain cases the calculated value of phi(g) is less than unity. This prediction is in agreement with experimental observations.

Seshadri, K.↗
NASA NTRS1993

Heat Transfer from Radiatively Heated Material in a Low Reynolds Number Microgravity Environment

A mathematical model of the transient three-dimensional heat transfer between a slowly moving ambient gas stream and a thermally thick or thin flat surface heated by external radiation in a microgravity environment is presented. The problem is motivated in part by fire safety issues in spacecraft. The gas phase is represented by variable property convection-diffusion energy and mass conservation equations valid at low Reynolds numbers. The absence of gravity and low Reynolds number together permit the flow to be represented by a self-consistent velocity potential determined by the ambient velocity and the thermal expansion in the gas. The solid exchanges energy with the gas by conduction/convection and with the surroundings by surface absorption and re-emission of radiation. Heat conduction in the solid is assumed to be one dimensional at each point on the surface as a consequence of the limited times (of order of 10 seconds) of interest in these simulations. Despite the apparent simplicity of the model, the results show a complex thermally induced flow near the heated surface. The thermal exchange between the gas and solid produces an outward sourcelike flow upstream of the center of the irradiated area and a sinklike flow downstream. The responses of the temperature fields and the associated flows to changes in the intensity of the external radiation and the ambient velocity are discussed.

Yamashita, H.↗
NASA NTRS1994

Green's formula and variational principles for cosmic-ray transport with application to rotating and shearing flows

Green's theorem and Green's formula for the diffusive cosmic-ray transport equation in relativistic flows are derived. Green's formula gives the solution of the transport equation in terms of the Green's function of the adjoint transport equation, and in terms of distributed sources throughout the region R of interest, plus terms involving the particle intensity and streaming on the boundary. The adjoint transport equation describes the time-reversed particle transport. An Euler-Lagrange variational principle is then obtained for both the mean scattering frame distribution function f, and its adjoint f(dagger). Variations of the variational functional with respect to f(dagger) yield the transport equation, whereas variations of f yield the adjoint transport equation. The variational principle, when combined with Noether's theorem, yields the conservation law associated with Green's theorem. An investigation of the transport equation for steady, azimuthal, rotating flows suggests the introduction of a new independent variable H to replace the comoving frame momentum variable p'. For the case of rigid rotating flows, H is conserved and is shown to be analogous to the Hamiltonian for a bead on a rigidly rotating wire. The variable H corresponds to a balance between the centrifugal force and the particle inertia in the rotating frame. The physical interpretation of H includes a discussion of nonrelativistic and special relativistic rotating flows as well as the cases of aziuthal, differentially rotating flows about Schwarzs-child and Kerr black holes. Green's formula is then applied to the problem of the acceleration of ultra-high-energy cosmic rays by galactic rotation. The model for galactic rotation assumes an angular velocity law Omega = Omega(sub 0)(omega(sub 0)/omega), where omega denotes radial distance from the axis of rotation. Green's functions for the galactic rotation problem are used to investigate the spectrum of accelerated particles arising from monoenergetic and truncated power-law sources. We conclude that it is possible to accelerate particles beyond the knee by galactic rotation, but not in sufficient number to adequately explain the observed spectrum.

Webb, G. M.↗
NASA NTRS1997

Frozen-Flux Modelling for Epochs 1915 and 1980

The frozen-flux hypothesis for the Earth's liquid core assumes that convective terms dominate diffusive terms in the induction equation governing the behaviour of the magnetic field at the surface of the core. While highly plausible on the basis of estimates of physical parameters, the hypothesis has been questioned. To study this hypothesis, we improve the method which tests the consistency of magnetic observations with the hypothesis by constructing simple, flux-conserving core-field models fitting the data at pairs of epochs. We introduce a new approach that fixes the patch configurations at each of the two epochs before inversion, so that each configuration is consistent with its respective data set but possesses the same patch topology. We expand upon the inversion algorithm, using quadratic programming to maintain the proper flux sign within patches; the modelling calculations are also extended to include data types that depend non-linearly on the model. Every test of a hypothesis depends on the characterization of the observational uncertainties; we undertake a thorough review of this question. For main-field models, the primary source of uncertainty comes from the crustal field. We base our analysis on statistical models of the crustal magnetization, adjusted to bring it into better conformity with our data set. The noise model permits us to take into account the correlations between the measurements and requires that a different weighting be given to horizontal and vertical components. It also indicates that the observations should be fit more closely than has been the practice heretofore. We apply the revised method to Magsat data from 1980 and survey and observatory data from 1915.5, two data sets believed to be particularly difficult to reconcile with the frozen-flux hypothesis. We compute a pair of simple, flux-conserving models that fit the averaged data from each epoch. We therefore conclude that present knowledge of the geomagnetic fields of 1980 and 1915.5 is consistent with the frozen-flux hypothesis.

OBrien, Michael S.↗
NASA NTRS2009

A Reconstruction Approach to High-Order Schemes Including Discontinuous Galerkin for Diffusion

We introduce a new approach to high-order accuracy for the numerical solution of diffusion problems by solving the equations in differential form using a reconstruction technique. The approach has the advantages of simplicity and economy. It results in several new high-order methods including a simplified version of discontinuous Galerkin (DG). It also leads to new definitions of common value and common gradient quantities at each interface shared by the two adjacent cells. In addition, the new approach clarifies the relations among the various choices of new and existing common quantities. Fourier stability and accuracy analyses are carried out for the resulting schemes. Extensions to the case of quadrilateral meshes are obtained via tensor products. For the two-point boundary value problem (steady state), it is shown that these schemes, which include most popular DG methods, yield exact common interface quantities as well as exact cell average solutions for nearly all cases.

Huynh, H. T.↗
NASA NTRSDate not supplied

Comparisons of Mixing Efficiency for the Strut Fuel Injector Obtained from Large-Eddy and Reynolds-Averaged Simulations, and Experiments

Mixing efficiency is obtained for a strut fuel injector at hypervelocity flow conditions by using large-eddy simulations (LES), Reynolds-averaged simulations (RAS), and experiments. The injector and flow conditions have been previously investigated by using RAS and experiments as a part of the Enhanced Injection and Mixing Project (EIMP) at the NASA Langley Research Center (LaRC). Because the fidelity of LES is a strong function of the grid, the mixing efficiency is obtained on two grids, the coarser of which is a factor of two coarser in each of the three dimensions with respect to the fine grid. The RAS uses the two-equation linear eddy viscosity and diffusivity modeling of Menter. In RAS, the species diffusivity model exhibits a strong dependence on the turbulent Schmidt number, which is often adjusted until some metric of engineering interest, such as the mixing efficiency, matches the experimental data. In the absence of experimental data, scale-resolving simulations, such as LES, have been proposed as surrogates for experiments that could provide the data needed to “calibrate” the turbulent Schmidt number in the RAS models. This approach is followed because LES requires significantly more computational resources (CPU, data storage, and time) than RAS, making it prohibitive for use in many engineering applications and specifically for parameter exploration or optimization. Here we examine the mixing efficiency obtained from several RAS with different values of the turbulent Schmidt number, and compare the results with those obtained from the LES and experiments. In addition, the least squares fitting approach was used to demonstrate how to obtain an estimate for the turbulent Schmidt number from LES analytically. These estimates were then used together with prior knowledge about RAS model sensitivity to select a turbulence model that was expected to best match the LES data.

LES↗