Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Defect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Effects of excess carriers on charged defect concentrations in wide bandgap semiconductors

Unintentional doping and doping limits in semiconductors are typically caused by compensating defects with low formation energies. Since the formation enthalpy of a charged defect depends linearly on the Fermi level, doping limits can be especially pronounced in wide bandgap semiconductors where the Fermi level can vary substantially. Introduction of non-equilibrium carrier concentrations during growth or processing alters the chemical potentials of band carriers and allows populations of charged defects to be modified in ways impossible at thermal equilibrium. We demonstrate that in the presence of excess carriers, the rates of carrier capture and emission involving a defect charge transition level determine the admixture of electron and hole quasi-Fermi levels involved in the formation enthalpy of non-zero charge defect states. To understand the range of possible responses, we investigate the behavior of a single donor-like defect as functions of extrinsic doping and charge transition level energy. We find that that excess carriers will increase the formation enthalpy of compensating defects for most values of the charge transition level in the bandgap. Thus, it may be possible to use non-equilibrium carrier concentrations to overcome limitations on doping imposed by native defects. Cases also exist in which the concentration of defects with the same charge polarity as the majority dopant is either left unchanged or actually increases. This surprising effect arises when emission rates are suppressed relative to the capture rates and is most pronounced in wide bandgap semiconductors. We provide guidelines for carrying out experimental tests of this model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Digital twins and deep learning segmentation of defects in monolayer MX 2 phases

Developing methods to understand and control defect formation in nanomaterials offers a promising route for materials discovery. Monolayer MX 2 phases represent a particularly compelling case for defect engineering of nanomaterials due to the large variability in their physical properties as different defects are introduced into their structure. However, effective identification and quantification of defects remain a challenge even as high-throughput scanning transmission electron microscopy methods improve. This study highlights the benefits of employing first principles calculations to produce digital twins for training deep learning segmentation models for defect identification in monolayer MX 2 phases. Around 600 defect structures were obtained using density functional theory calculations, with each monolayer MX 2 structure being subjected to multislice simulations for the purpose of generating the digital twins. Several deep learning segmentation architectures were trained on this dataset, and their performances evaluated under a variety of conditions such as recognizing defects in the presence of unidentified impurities, beam damage, grain boundaries, and with reduced image quality from low electron doses. Further, this digital twin approach allows benchmarking different deep learning architectures on a theory dataset, which enables the study of defect classification under a broad array of finely controlled conditions. It thus opens the door to resolving the underpinning physical reasons for model shortcomings and potentially chart paths forward for automated discovery of materials defect phases in experiments.

36 MATERIALS SCIENCE↗

Simulating charged defects at database scale

Point defects have a strong influence on the physical properties of materials, often dominating the electronic and optical behavior in semiconductors and insulators. The simulation and analysis of point defects is, therefore, crucial for understanding the growth and operation of materials, especially for optoelectronics applications. In this work, we present a general-purpose Python framework for the analysis of point defects in crystalline materials as well as a generalized workflow for their treatment with high-throughput simulations. The distinguishing feature of our approach is an emphasis on a unique, unit cell, structure-only, definition of point defects which decouples the defect definition, and the specific supercell representation used to simulate the defect. This allows the results of first-principles calculations to be aggregated into a database without extensive provenance information and is a crucial step in building a persistent database of point defects that can grow over time, a key component toward realizing the idea of a “defect genome” that can yield more complex relationships governing the behavior of defects in materials. We demonstrate several examples of the approach for three technologically relevant materials and highlight current pitfalls that must be considered when employing these methodologies as well as their potential solutions.

36 MATERIALS SCIENCE↗

Investigation of band-gap properties in one-dimensional ternary photonic crystals with a single defect layer

We report one-dimensional ternary photonic crystals containing a single defect layer, whose photonic band-gap properties including the bandwidth and defect mode are analysed by changing the thickness and position of the defect layer, the number of unit cell repetitions in photonic crystals and the initial incidence angle. The results obtained show that the defect layer thickness can strongly affect the transmittance and the number of defect modes. The defect mode can disappear by increasing the number of periodic layers. The position of the defect layer in the photonic crystals can change the wavelength and transmittance of the defect mode. In addition, both the bandwidth and the defect mode properties of TE and TM waves are strongly dependent on the incidence angle. (photonic crystals)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electronic structure of Humble defects in Ge and Ge 0.8⁢ Si 0.2

The group-IV diamond-structure elements are known to host a variety of planar defects, including {001} planar defects in C and {001}, {111}, and {113} planar defects in Si and Ge. Among the {001} planar defects, the Humble defect, known for some time to occur in Ge, has recently also been observed in Si-Ge alloys, but the details of its electronic structure remain poorly understood. Here, in this work, we perform first-principles density-functional calculations to study Humble defects in both Ge and Ge 0.8⁢ Si 0.2 . We also measure the Si L 2,3 -edge electron energy-loss spectra both at the defect and in a bulk-like region far from the defect and compare with theoretical calculations on corresponding Si sites in our first-principles calculations. We find that inclusion of core-hole effects in the theory is essential for reproducing the observed L 2,3 edge spectra, and that once they are included, the results provide a set of fingerprints for different types of local atomic bonding environments in Ge 0.8⁢ Si 0.2 . Our first-principles calculations reveal that the Humble defects have a tendency to enlarge the electronic band gap, which may have potential uses in band engineering. The use of hybrid functionals for an improved description of the band gap in these systems is also discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Disorder effects on the band structure of ZnGeN 2 : Role of exchange defects

The role of exchange defects on the band structure of ZnGeN 2 is investigated. Exchange defects are defined through the exchange of cations Zn and Ge starting from the ideal Pna2 1 crystal structure, which obeys the local octet rule. Each such exchange creates several nitrogen-centered tetrahedra which violate the local octet rule, although overall charge neutrality is preserved. We study several distributions of exchange defects, some with all antisites making up the exchange defect close to each other and with increasing numbers of exchange defects, and others where the two types of antisites Zn Ge and Ge Zn are kept separated from each other. We also compare the results for these models with a fully random distribution of Zn and Ge on the cation sites. We show that for a single-nearest-neighbor exchange defect, the band gap is narrowed by about 0.5 eV due to two effects: (1) the Zn Ge antisites form filled acceptor states just above and merging with the valence-band maximum (VBM) of perfect crystal ZnGeN 2 and (2) the Ge Zn antisites form a resonance in the conduction band which lowers the conduction-band minimum (CBM). When more exchange defects are created, these acceptor states broaden into bands which can lower the gap further. When tetrahedra occur surrounded completely by four Zn atoms, states even deeper in the gap are found localized all near these tetrahedra, forming a separate intermediate band. Finally, for phase-segregated Zn Ge and Ge Zn , the gap is significantly more reduced, but no separate band is found to occur. The Zn Ge acceptorlike states now form a percolating defect band which is significantly wider and hence reaches deeper into the gap. In all cases, the wave functions near the top of the new VBM remain, to some extent, localized near the Zn Ge sites. For a fully random case, the gap is even more severely reduced by almost 3 eV. The total energy of the system increases with the number of octet-rule-violating tetrahedra and the energy cost per exchange defect of order 2 eV is quite high.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spin-orbit coupling effects on predicting defect properties with hybrid functionals: A case study in CdTe

Defect formation energies and transition levels are critical in determining doping behavior and recombination in semiconductor applications. Hybrid functionals are often used to overcome the band gap and delocalization errors of standard density-functional theory, and it is tempting to presume that the defect properties are correctly predicted once the hybrid functional mixing parameter reproduces the experimental band gap. However, pronounced spin-orbit coupling (SOC) effects can have an additional important role, which is clearly shown in this work by analyzing SOC effects originating from the Te-p orbitals in CdTe. In this work, we therefore use a hybrid functional that reproduces the experimental band gap when SOC is included, requiring a larger mixing parameter a=0.33 compared to the conventional choice of a=0.25. This hybrid functional was then used to predict defect properties, e.g., formation energy, transition level, and defect equilibrium. For defect states that do not directly involve the Te-p orbitals, such as the Cd interstitial (Cdi), we find that the effect of SOC on the defect levels can be captured by simply considering the SOC-induced band-edge shift. This is not the case for the A center (ClTe-VCd defect pair), where the localized acceptor state formed by Te-p orbitals is more directly affected by the SOC. For this defect, a mixing parameter as large as a=0.40 is required to reproduce the experimental acceptor level. Regarding the implications for photovoltaics, we suggest that the Cdi, which is the dominant compensating donor, could play an important role as a recombination center. While Cdi is usually thought of as a benign shallow donor, our predicted defect levels in the fully band-gap-corrected calculations are deep enough to raise a concern, and we propose a recombination mechanism for electron capture by Cdi.

36 MATERIALS SCIENCE↗

Tuned and screened range-separated hybrid density functional theory for describing electronic and optical properties of defective gallium nitride

We apply a hybrid density functional theory approach, based on a tuned and screened range-separated hybrid (SRSH) exchange-correlation functional, to describe the optoelectronic properties of defective gallium nitride (GaN). SRSH and time-dependent SRSH (TDSRSH) are tuned to produce accurate energetics for the pristine material and applied to the study of a series of point defects in bulk GaN, a blue light-emitting material that degrades in the presence of defects. We first establish the accuracy of the method by comparing the predicted quasiparticle gap and low-energy excitation spectra of (TD)SRSH and many-body perturbation theory for both pristine GaN and GaN containing a single nitrogen vacancy. Aided by the reduced computational cost of (TD)SRSH, we then report on three additional technologically relevant point defects and defect complexes in GaN: the gallium vacancy, the carbon interstitial, and the carbon-silicon complex. We compute the low-energy optical absorption spectra for these defects and show the presence of defect-centered transitions. Furthermore, by estimating the Stokes shift, we predict, in agreement with previous studies, that the carbon substitutional defect is a candidate for the detrimental yellow luminescence in GaN. Furthermore, this study indicates that TDSRSH is a promising and computationally feasible approach for quantitatively accurate, first-principles modeling of defective semiconductors.

36 MATERIALS SCIENCE↗

Point and extended defects in heteroepitaxial 𝛽−G⁡a 2 ⁢O 3 films

G⁡a 2 ⁢O 3 is emerging as an excellent potential semiconductor for high power and optoelectronic devices. However, the successful development of G⁡a 2⁢ O 3 in a wide range of applications requires a full understanding of the role and nature of its point and extended defects. Here, in this work, high quality epitaxial G⁡a 2 ⁢O 3 films were grown on sapphire substrates by metal-organic chemical vapor deposition and fully characterized in terms of structural, optical, and electrical properties. Then defects in the films were investigated by a combination of depth-resolved Doppler broadening and lifetime of positron annihilation spectroscopies and thermally stimulated emission (TSE). Positron annihilation techniques can provide information about the nature and concentration of defects in the films, while TSE reveals the energy level of defects in the bandgap. Despite very good structural properties, the films exhibit short positron diffusion length, which is an indication of high defect density and long positron lifetime, a sign for the formation of Ga vacancy related defects and large vacancy clusters. These defects act as deep and shallow traps for charge carriers as revealed from TSE, which explains the reason behind the difficulty of developing conductive G⁡a 2 ⁢O 3 films on non-native substrates. Positron lifetime measurements also show nonuniform distribution of vacancy clusters throughout the film depth. Further, the work investigates the modification of defect nature and properties through thermal treatment in various environments. It demonstrates the sensitivity of G⁡a 2 ⁢O 3 microstructures to the growth and thermal treatment environments and the significant effect of modifying defect structure on the bandgap and optical and electrical properties of G⁡a 2 ⁢O 3 .

defects↗

First-principles determination of the phonon-point defect scattering and thermal transport due to fission products in ThO 2

This work presents the first-principles calculations of the lattice thermal conductivity degradation due to point defects in thorium dioxide using an iterative solution of the Pierels-Boltzmann transport equation. We have used the non perturbative Green’s function methodology to compute the phonon- point defect scattering rates that consider the local distortion around the point defect, including the mass difference changes, interatomic force constants, and structural relaxation near the point defects. The point defects considered in this work include the vacancy of thorium ($V$ $TH$ ) and oxygen ($V$ $O$ ), substitutions of helium ($He$ $Th$ ), krypton ($Kr$ $Th$ ), zirconium ($Zr$ $Th$ ), iodine ($I$ $Th$ ) and xenon ($Xe$ $Th$ ) in the thorium site, and the three different configurations of the Schottky defects. The results of the phonon-defect scattering rate reveal that, among all the considered intrinsic defects, the thorium vacancy and helium substitution in the thorium site scatter the phonon most due to the substantial changes in the force constant and structural distortions. The scattering of phonons due to the substitutional defects unveils that the zirconium atom scatters phonons the least, followed by xenon, iodine, krypton, and helium. This is contrary to the intuition that the scattering strength follows $He$ $Th$ > $Kr$ $Th$ > $Zr$ $Th$ > $I$ $Th$ > $Xe$ $Th$ based on the mass difference. This striking difference in the zirconium phonon scattering is due to the local chemical environment changes. Zirconium is an electropositive element with valency similar to thorium and, therefore, can bond with the oxygen atoms, thus creating less force constant variance compared to iodine, an electronegative element noble gas helium, xenon, and krypton. In conclusion, these results can serve as the benchmark for the analytical models and help the engineering-scale modeling effort for nuclear design.

36 MATERIALS SCIENCE↗

Thickness-Dependent Defect Structure of Epitaxial Silicon Thin Films Deposited by Hot-Wire Chemical Vapor Deposition

In this work, we study the defect structure of epitaxial film silicon grown by hot-wire chemical vapor deposition (HWCVD) on Si wafers, as a function of film thickness. We used scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) to investigate the distribution, type, and composition of the defects. To investigate the crystallographic structure, we used electron backscattering diffraction (EBSD) on the surface and cross sections of the samples. We observed that, as desired, the films grew epitaxially, and that there was an increase in the density of defects as the film thickness increased. One of the most dominant types of defects grows as long columns, reaching many micrometers in diameter at the surface. EBSD showed that these defects were composed of randomly oriented polycrystalline-silicon grains. To study the electrical nature of the film and defects, we used conductive atomic force microscopy (C-AFM), which provides information on film conductivity with high-spatial resolution. C-AFM showed that the columnar defects have much lower conductivity than the surrounding Si thin film. In this work, we show how the concentration and distribution of the defects change as the film thickness increases, and investigate their electrical properties. Finally, we discuss how the defect structure might impact solar cells made with this material.

14 SOLAR ENERGY↗

Kinetic approach to defect reduction in directed self-assembly

As a potential solution to next-generation nanolithography, directed self-assembly (DSA) of block copolymers (BCPs) is still restrained in high-volume manufacturing primarily due to its defectivity issue. Though defects possess greater free energies than aligned morphologies and are highly energetically unfavorable, they can be kinetically trapped by the energy barriers and persist for a long time during annealing. Therefore, understanding the kinetics of defect annihilation is crucial in revealing the mechanism of defect formation and in further reducing defectivity in DSA. We focus on two types of predominant defects in DSA- dislocation and bridge. Furthermore, a kinetic model of each defect type is developed through statistical analysis of experimental data, providing insight into possible approaches of further defect reduction. We also investigate the impact of annealing temperature and film thickness on annihilation kinetics and discuss the reasons behind the observed results. By simply optimizing annealing conditions and film thickness, we have successfully reduced the total defect density by 1 order of magnitude. Though these findings are based on polystyrene-b-poly(methyl methacrylate) (PS-b-PMMA), we anticipate they could be readily applied to other BCP platforms as well.

42 ENGINEERING↗

Scalar Atomic Defect-Based Solid-State Self-calibrating Magnetometer (3SM) for Space Plasma Analysis

The Earth’s magnetosphere is a system of multiple, co-located particle populations interacting via plasma waves. Things to understand are driving processes, radiation belt and ring current issues, auroral physics, internal plasma processes, and magnetosphere-ionosphere mapping issues. These plasma-physics processes enable the Earth’s magnetosphere to evolve in response to temporal changes in the solar wind and they underlie the phenomena of space weather, which impacts spacecraft systems, astronauts, radio communications, and ground based electric-power grids. The objective of 3SM is to measure magnetic field strength and to calibrate the Vector Magnetometer (VM) device to maintain absolute accuracy during a mission. The 3SM features make the instrument preferably suited not only for the traditional role of scalar magnetometers as absolute references for the calibration of the on-board vector instruments, but also for extended operational capacities, such as higher frequency scalar measurements (of potential interest for magnetosphere studies for the low frequency part of the spectrum) or autonomous scalar / vector operations. Diamond has been the solid-state platform of choice for quantum device technologies for some time, however, it suffers from difficulties such as scalability, integration, and cost. While the diamond platform is very useful for quantum technologies, further development is needed to make it viable. The material platform of choice for NASA Glenn’s Quantum Sensing And Spin Physics (Q-SASP) is silicon carbide (SiC). This is due to the much higher industry development of the SiC material platform for high-power and high-temperature electronics. It leverages both the decades-long SiC development expertise and infrastructure at NASA Glenn and its growing capabilities in quantum metrology. To make SiC devices usable for quantum technologies such as quantum sources, a much deeper understanding of defects is needed. Q-SASP is developing quantum metrology capabilities to evaluate the energy structure, defect formation energy, band structure augmentation, generation/recombination rates, and limits of dipole-dipole coupling in non-metal implanted SiC devices. This can be achieved by analysis of zero-field splitting, low-field resonance, and singlet-triplet mixing through various forms of Electrically Detectable Magnetic Resonance (EDMR) and Near-Zero Field Magnetic Resonance (NZFMR) spectroscopy. This work will discuss recent system developments, device developments, computational modeling, and spectroscopy results and analysis of defects created by non-metal implantations in SiC devices. The defect formation energies of V Si ,V C , V C V Si , N C V Si , N Si , N C in 4H-SiC are previously reported values in other research [2]-[3]. The defect formation energies of PSi and PC were calculated in GPAW [fig 1A]. The basic underlying mechanism of the zero-field phenomenon is the mixing of singlet and triplet states [4]-[5]. In most spin-dependent transport, two electron spins are involved, and thus one must consider each of their interactions with the field. We investigated the electronic and magnetic properties of 4H-SiC and 6H-SiC. The defect formation energy helps us determine what types of defects we are observing in the SiC EDMR experiment. They have very low formation energy (it is negative). The phosphorus substitution in 4H-SiC is a very stable defect. The band diagrams provide us with vital information about how the electronic properties of SiC (such as band gap) change as we add non-metal defects. The zero-field splitting parameters allow us to study the inflection point in the NZFMR [fig 1B]. We clearly observed zero-field splitting. We also noted that the zero-field splitting remained constant with changing bias. We aspect it zero-field splitting to remain constant while the hyperfine and exchange interaction perturbations shift under the influence of an external magnetic field. This is the essence of quantum magnetometry and self-calibration.

space plasma↗

Preparation and photocatalytic ability of highly defective carbon nanotubes

The highly defective carbon nanotubes (CNTs) were prepared using a heat-treatment technique and their photocatalytic ability was reported for the first time. The results showed that the highly defective CNTs had the photocatalytic ability in the range of visible light. The results also indicated that the electrical properties of CNTs were dependent not only on the diameter and helicity but also on the defect number of tubes. The defects of CNTs might be produced from vacancies, local lattice reordering and intertube reorientation during the course of the desorption of oxygen atoms, which could initiate defect states in the band gap. Absorption of visible light led to the formation of electron/hole pairs and hence caused photocatalytic oxidation. Consequently, the highly defective CNTs having the photocatalytic ability would be promising as a new photocatalytic material in the visible light. - Graphical abstract: The highly defective carbon nanotubes (CNTs) were prepared using a heat-treatment technique. The results showed that the highly defective CNTs had the photocatalytic ability in the range of visible light.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Diffusion of point defects in ordered and disordered Ni–Fe alloys

We present how the ordered and disordered arrangement of elements can affect the transport properties of point defects in Ni–Fe metallic alloys using atomistic simulations. With molecular dynamics (MD) based on both first-principles calculations and empirical potentials, we show that defect diffusion slows down in the ordered Ni–Fe phases due to the decrease of effective coordination number for nearest-neighbor defect jumps. Thus, the disorder-order transition influences defect migration by changing the local atomic environment. We further elucidate that the defect diffusion in ordered and disordered phases is a result of the interplay between preferential defect diffusion and defect stability that relate to the defect energetics. These results indicate that defect evolution may be significantly delayed by embedding certain ordered structures into bulk disordered alloys, which are important to the understanding of the role of disorder in metallic alloys and provide insights on materials engineering by tuning the disorder/order level.

36 MATERIALS SCIENCE↗

{delta}-Phase to defect fluorite (order-disorder) transition in the R{sub 2}O{sub 3}-MO{sub 2} (R = Sc, Tm, Lu; M = Zr, Hf) systems

Graphical abstract: Effect of rapid and slow cooling on the bulk conductivity of Ln{sub 4}Zr{sub 3}O{sub 12} (Ln = Tm, Lu). Arrhenius plots of bulk conductivity for (1, 2, 4, and 5) Tm{sub 4}Zr{sub 3}O{sub 12} and (3 and 6) Lu{sub 4}Zr{sub 3}O{sub 12}: (1 and 3) coprecipitation, rapid cooling; (2) mechanical activation, rapid cooling; (4 and 6) coprecipitation, slow cooling; (5) mechanical activation, slow cooling. Research highlights: {yields} We studied the R{sub 4}M{sub 3}O{sub 12} (R = Sc, Tm, Lu; M = Zr, Hf) and Ln{sub 2}Hf{sub 2}O{sub 7} (Ln = Dy, Lu) compounds prepared by different procedures (heat treatment after (1) mechanical activation of oxides and (2) co-precipitation). {yields} We have studied the {delta}-phase to defect fluorite F* (order-disorder) transition in the R{sub 4}M{sub 3}O{sub 12} (R = Sc, Tm, Lu; M = Zr, Hf) compounds using different cooling rates. {yields} The results show in the first time that the structure of Tm{sub 4}Zr{sub 3}O{sub 12} depends on cooling rate: defect fluorite (F*) after rapid cooling and rhombohedral ({delta}-phase) after slow cooling. The temperature of the {delta}-phase to defect fluorite (order-disorder) transition in this compound is {approx}1600 {sup o}C. {yields} The high-temperature conductivity of the rhombohedral phases {delta}-R{sub 4}Zr{sub 3}O{sub 12} (R = Sc, Tm, Lu) is lower than that of the fluorite-like phases: most of our {delta}-R{sub 4}Zr{sub 3}O{sub 12} samples have 740 {sup o}C conductivity in the range 10{sup -6} to 10{sup -5} S/cm. {yields} The temperature dependence of conductivity for {delta}-Sc{sub 4}Zr{sub 3}O{sub 12} is found for the first time to have an anomaly, which suggests that this compound undergoes a phase transition at 650-700 {sup o}C. -- Abstract: We have studied the {delta}-phase to defect fluorite F* (order-disorder) transition in the R{sub 4}M{sub 3}O{sub 12} (R = Sc, Tm, Lu; M = Zr, Hf) compounds. The temperature of the {delta}-F* phase transition in Tm{sub 4}Zr{sub 3}O{sub 12} is {approx}1600 {sup o}C. The rate of this transition in R{sub 4}Zr{sub 3}O{sub 12} (R = Sc, Tm, Lu) decreases markedly with decreasing difference in ionic radius between the R{sup 3+} and Zr{sup 4+}, leading to stabilization of the {delta}-phases R{sub 4}Zr{sub 3}O{sub 12} with R = Sc and Lu at high temperatures ({approx}1600 {sup o}C). During slow cooling (5 {sup o}C/h), the high-temperature defect fluorites F*-R{sub 2}Hf{sub 2}O{sub 7} (R = Tm, Lu) decompose reversibly to form the {delta}-phases R{sub 4}Hf{sub 3}O{sub 12}. Some of the materials studied exhibit microdomains formation effects, typical of the fluorite-related oxide compounds in the R{sub 2}O{sub 3}-MO{sub 2} (M = Ti, Zr, Hf) systems of the heavy rare earths. The high-temperature defect fluorites F*-R{sub 4}M{sub 3}O{sub 12} (R = Tm, Lu; M = Zr, Hf) as a rule contain antiphase microdomains of {delta}-R{sub 4}Zr{sub 3}O{sub 12}. After slow cooling (5 {sup o}C/h), such microdomains are large enough for the {delta}-phase to be detected by X-ray diffraction. The conductivity data for R{sub 4}M{sub 3}O{sub 12} (R = Sc, Tm, Lu; M = Zr, Hf) and Ln{sub 2}Hf{sub 2}O{sub 7} (Ln = Dy, Lu) prepared by different procedures show that the rhombohedral phases {delta}-R{sub 4}M{sub 3}O{sub 12} (R = Sc, Tm, Lu; M = Zr, Hf) are poorer conductors than the defect fluorites, with 740 {sup o}C conductivity from 10{sup -6} to 10{sup -5} S/cm. The conductivity drops with decreasing rare-earth ionic radius and, judging from the E{sub a} values obtained (1.04-1.37 eV), is dominated by oxygen ion transport. The highest conductivity, {approx}6 x 10{sup -4} S/cm at 740 {sup o}C, is offered by the rapidly cooled F*-Dy{sub 2}Hf{sub 2}O{sub 7}. In the fluorite homologous series, oxygen ion conductivity decreases in the order defect pyrochlore > defect fluorite > {delta}-phase.

36 MATERIALS SCIENCE↗

Photoluminescence Dynamics of Aryl sp 3 Defect States in Single-Walled Carbon Nanotubes

Photoluminescent defect states introduced by sp 3 functionalization of semiconducting carbon nanotubes are rapidly emerging as important routes for boosting emission quantum yields and introducing new functionality. Knowledge of the relaxation dynamics of these states is required for understanding how functionalizing agents (molecular dopants) may be designed to access specific behaviors. We measure photoluminescence (PL) decay dynamics of sp 3 defect states introduced by aryl functionalization of the carbon nanotube surface. Results are given for five different nanotube chiralities, each doped with a range of aryl functionality. We find the PL decays of these sp 3 defect states are biexponential, with both components relaxing on timescales of ~ 100 ps. Exciton trapping at defects is found to increases PL lifetimes by a factor of 5-10, in comparison to those for the free exciton. A significant chirality dependence is observed in the decay times, ranging from 77 ps for (7,5) nanotubes to > 600 ps for (5,4) structures. The strong correlation of time constants with emission energy indicates relaxation occurs via multiphonon decay processes, with close agreement to theoretical expectations. Variation of the aryl dopant further modulates decay times by 10-15%. The aryl defects also affect PL lifetimes of the free E 11 exciton. Shortening of the E 11 bright state lifetime as defect density increases provides further confirmation that defects act as exciton traps. A similar shortening of the E11 dark exciton lifetime is found as defect density increases, providing strong experimental evidence that dark excitons are also trapped at such defect sites.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Tuning Electronic Structure of Single Layer MoS 2 through Defect and Interface Engineering

Transition-metal dichalcogenides (TMDs) have emerged in recent years as a special group of two-dimensional materials and have attracted tremendous attention. Among these TMD materials, molybdenum disulfide (MoS 2 ) has shown promising applications in electronics, photonics, energy, and electrochemistry. In particular, the defects in MoS 2 play an essential role in altering the electronic, magnetic, optical, and catalytic properties of MoS 2 , presenting a useful way to engineer the performance of MoS 2 . The mechanisms by which lattice defects affect the MoS 2 properties are unsettled. In this work, we reveal systematically how lattice defects and substrate interface affect MoS 2 electronic structure. We fabricated single-layer MoS 2 by chemical vapor deposition and then transferred onto Au, single-layer graphene, hexagonal boron nitride, and CeO 2 as substrates and created defects in MoS 2 by ion irradiation. Here, we assessed how these defects and substrates affect the electronic structure of MoS 2 by performing X-ray photoelectron spectroscopy, Raman and photoluminescence spectroscopies, and scanning tunneling microscopy/spectroscopy measurements. Molecular dynamics and first-principles based simulations allowed us to conclude the predominant lattice defects upon ion irradiation and associate those with the experimentally obtained electronic structure. We found that the substrates can tune the electronic energy levels in MoS 2 due to charge transfer at the interface. Furthermore, the reduction state of CeO 2 as an oxide substrate affects the interface charge transfer with MoS 2 . The irradiated MoS 2 had a faster hydrogen evolution kinetics compared to the as-prepared MoS 2 , demonstrating the concept of defect controlled reactivity in this phase. Our findings provide effective probes for energy band and defects in MoS 2 and show the importance of defect engineering in tuning the functionalities of MoS 2 and other TMDs in electronics, optoelectronics, and electrochemistry.

42 ENGINEERING↗