SEARCH · Engineering Papers

Results for “Data transfer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

All sources NASA NTRS DOE OSTI

NASA NTRS1986

US monkey and rat experiments flown on the Soviet Satellite Cosmos 1514

On December 14, 1983, the U.S.S.R. launched Cosmos 1514, an unmanned spacecraft carrying biological and radiation physics experiments from nine countries, including five from the United States. This was the fourth flight with U.S. experiments aboard one of the Soviet unmanned spacecraft. The Cosmos 1514 flight was limited to five days duration because it was the first nonhuman primate flight. Cosmos 1514 marked a significant departure from earlier flights both in terms of Soviet goals and the degree of cooperation between the U.S.S.R. and the United States. This flight included more than 60 experiments on fish, crawfish eggs, plants and seeds, 10 Wistar pregnant rats, and 2 young adult rhesus monkeys as human surrogates. United States specialist participated in postflight data transfer and specimen transfer, and conducted rat neonatal behavioral studies. An overview of the mission is presented focusing on preflight, on-orbit, and postflight activites pertinent to the five U.S. experiments aboard Cosmos.

Mains, R. C.↗

NASA NTRS1986

Methods of downloading to user institutions

The Pilot Climate Data System (PCDS) not only supports the ability to output data in a uniform structure via the Common Data Format (CDF, but also supports the ability to provide data in native format for any data set supported by the PCDS. Methods are discussed for acquiring data in either format from the PCDS for further work at remote sites. Four levels of remote utilization are defined, based on the extent of offloading the National Space Science Data Center (NSSDC) computer and local PCDS processing. Characteristics of each level are thoroughly explained, including details of information and data transfers, downloading, uploading, and offloading of the NSSDC computer. Only the levels themselves are specified here. The first level defined is that of a network-based distributed PCDS. A subset of the PCDS software is ported to another VAX and made available on a network (i.e., SPAN) node. There is no subset of the PCDS at the second level, but it is also network based. Non-network utilization of the PCDS, requiring dial-up log on, is denoted as a third level. Finally, at the fourth level, personal computer utilization of the PCDS through dial-up log on with proper terminal emulation is defined.

Treinish, L.↗

NASA NTRS1985

Flow visualization in the Space Shuttle's main engine

The analysis and design of the Space Shuttle's main engine (SSME) power head involved extended finite difference computations conducted on a supercomputer. Certain problems arise, however, in connection with such a computer, and it is pointed out that the massive output from such analyses can actually inhibit insight into physical behavior. It is, therefore, also important to develop effective techniques for computer-user data transfer which match the computer's computational speed. In order to satisfy such requirements, powerful engineering workstations and three-dimensional color computer graphics codes were employed in the computational fluid dynamics (CFD) analyses of the Shuttle's engine. Consequently, the complex physical characteristics of the SSME's hot-gas manifold could be quickly visualized, interpreted, and compared with alternative designs.

Belie, G.↗

NASA NTRS1986

Near-real-time data transmission during the ICE - Comet Giacobini-Zinner encounter

The data links established between the U.S. and Europe during the September 1985 International Cometary Explorer/Comet Giacobini-Zinner encounter are summarized. The Space Physics Analysis Network (SPAN), which is a link between U.S. universities, research institutes and NASA centers, was responsible for the rapid dissemination and analysis of the data obtained from the encounter. The network was then linked across the Atlantic to support investigators involved in a European experiment on board the spacecraft. It is concluded that SPAN provided ESA personnel with a unique opportunity to experience near-real-time data acquisition. The data transfer was performed successfully, and the experience gained proved useful in assessing ESA's needs for future participation in scientific international networking.

Sanderson, T. R.↗

NASA NTRS1986

Space Station technology experiments and uses

The use of the proposed Space Station for technological experimentation is discussed. The general objectives and capabilities of the Station and the status of planning are reviewed; the external and internal environmental conditions at the 500-km 28.5-deg-inclination Station orbit are described; and six conceptual Technology Development Missions designed by NASA and included in the Mission Requirements Data Base are briefly characterized and illustrated with drawings. The missions considered concern spacecraft-materials performance, solar dynamic power, data transfer and processing microelectronics, long-term cryogenic-fluid storage, active-optics technology, and cryogenic-propellant transfer, storage, and reliquefaction.

Breckenridge, R. A.↗

NASA NTRS1985

WEST-3 wind turbine simulator development. Volume 1: Summary

This report is a summary description of WEST-3, a new real-time wind turbine simulator developed by Paragon Pacific Inc. WEST-3 is an all digital, fully programmable, high performance parallel processing computer. Contained in the report are descriptions of the WEST-3 hardware and software. WEST-3 consists of a network of Computational Units (CUs) working in parallel. Each CU is a custom designed high speed digital processor operating independently of other CUs. The CU, which is the main building block of the system, is described in some detail. A major contributor to the high performance of the system is the use a unique method for transferring data among the CUs. The software aspects of WEST-3 covered in the report include the preparation of the simulation model (reformulation, scaling and normalization), and the use of the system software (Translator, Linker, Assembler and Loader). Also given is a description of the wind turbine simulation model used in WEST-3, and some sample results from a study conducted to validate the system. Finally, efforts currently underway to enhance the user friendliness of the system are outlined; these include the 32-bit floating point capability, and major improvements in system software.

Sridhar, S.↗

NASA NTRS1986

ET TPS Development Criteria and Flight Instrumentation Program

The objective was to verify the design thermal environments for the Space Shuttle External Tank. These environments encompassed a myraid of potential flight cases which included nominal and dispersed trajectories launched from Kennedy Space Center (KSC) and Vandenberg and abort cases. Many iterations of environments have been produced during the evolution of the Space Shuttle system which required an analysis and assessment of each environment. A significant effort was expended in the analysis and application of wind tunnel and heat transfer data to develop math/computer models. Various versions of the aeroheating computer code MINIVER were tailored to calculate ascent aeroheating environments for the External Tank. The significant environment assessment results are summarized.

Warmbrod, John D.↗

NASA NTRS1987

Comparison of two procedures for predicting rocket engine nozzle performance

Two nozzle performance prediction procedures which are based on the standardized JANNAF methodology are presented and compared for four rocket engine nozzles. The first procedure required operator intercedence to transfer data between the individual performance programs. The second procedure is more automated in that all necessary programs are collected into a single computer code, thereby eliminating the need for data reformatting. Results from both procedures show similar trends but quantitative differences. Agreement was best in the predictions of specific impulse and local skin friction coefficient. Other compared quantities include characteristic velocity, thrust coefficient, thrust decrement, boundary layer displacement thickness, momentum thickness, and heat loss rate to the wall. Effects of wall temperature profile used as an input to the programs was investigated by running three wall temperature profiles. It was found that this change greatly affected the boundary layer displacement thickness and heat loss to the wall. The other quantities, however, were not drastically affected by the wall temperature profile change.

Davidian, Kenneth J.↗

NASA NTRS1987

Structural tailoring using the SSME/STAEBL code

Space Shuttle Main Engine/Structural Tailoring of Engine Blades (SSME/STAEBL) was developed by systematically modifying and enhancing the STAEBL code developed by Pratt and Whitney under contract to NASA Lewis Research Center. STAEBL was designed for application to gas turbine blade design. Typical design variables include blade thickness distribution and root chord. Typical constraints include resonance margins, root stress, and root to chord ratios. In this program, the blade is loaded by centrifugal forces only. Additions and modifications of STAEBL included in SSME/STAEBL include (1) thermal stress analysis; (2) gas dynamic (pressure) loads; (3) temperature dependent material and thermal properties; (4) forced vibrations; (5) tip displacement constraints; (6) single crystal material analysis; (7) blade cross section stacking offsets; and (8) direct time integration algorithm for transient dynamic response. Capabilities are also included which permit data transfer from finite element models and stand-alone analysis.

Rubinstein, Robert↗

NASA NTRS1987

A microgravity isolation mount

The design and preliminary testing of a system for isolating microgravity sensitive payloads from spacecraft vibrational and impulsive disturbances is discussed. The Microgravity Isolation Mount (MGIM) concept consists of a platform which floats almost freely within a limited volume inside the spacecraft, but which is constrained to follow the spacecraft in the long term by means of very weak springs. The springs are realized magnetically and form part of a six degree of freedom active magnetic suspension system. The latter operates without any physical contact between the spacecraft and the platform itself. Power and data transfer is also performed by contactless means. Specifications are given for the expected level of input disturbances and the tolerable level of platform acceleration. The structural configuration of the mount is discussed and the design of the principal elements, i.e., actuators, sensors, control loops and power/data transfer devices are described. Finally, the construction of a hardware model that is being used to verify the predicted performance of the MGIM is described.

Jones, D. I.↗

NASA NTRS1987

Space Station alpha joint bearing

Perhaps the most critical structural system aboard the Space Station is the Solar Alpha Rotary Joint which helps align the power generation system with the sun. The joint must provide structural support and controlled rotation to the outboard transverse booms as well as power and data transfer across the joint. The Solar Alpha Rotary Joint is composed of two transition sections and an integral, large diameter bearing. Alpha joint bearing design presents a particularly interesting problem because of its large size and need for high reliability, stiffness, and on orbit maintability. The discrete roller bearing developed is a novel refinement to cam follower technology. It offers thermal compensation and ease of on-orbit maintenance that are not found in conventional rolling element bearings. How the bearing design evolved is summarized. Driving requirements are reviewed, alternative concepts assessed, and the selected design is described.

Everman, Michael R.↗

NASA NTRS1986

Forced convection heat transfer to air/water vapor mixtures

Heat transfer coefficients were measured using both dry air and air/water vapor mixtures in the same forced convection cooling test rig (jet array impingement configurations) with mass ratios of water vapor to air up to 0.23. The primary objective was to verify by direct experiment that selected existing methods for evaluation of viscosity and thermal conductivity of air/water vapor mixtures could be used with confidence to predict heat transfer coefficients for such mixtures using as a basis heat transfer data for dry air only. The property evaluation methods deemed most appropriate require as a basis a measured property value at one mixture composition in addition to the property values for the pure components.

Richards, D. R.↗

NASA NTRS1986

Advanced technology for the Space Station

The goals and objectives of the Space Station Advanced Development Program are discussed. Data from tests and experiments in the areas of attitude control and stabilization, communications and tracking, data management systems, man systems, mechanisms, power systems, structures, thermal systems, and EVA are examined. The approaches used to implement these programs and for data transfer are described. The plans for the development of the Space Station are presented.

Nolan, Mark B.↗

NASA NTRS1987

Comparison of two procedures for predicting rocket engine nozzle performance

Davidian, Kenneth J.↗

NASA NTRS1985

Measurement of airfoil heat transfer coefficients on a turbine stage

A turbulence generating grid was designed and installed in the turbine inlet which produced the target nominal value of 10 percent free stream turbulence. Aerodynamic documentation of the rotor and stator midspan surface pressure distributions were obtained. Midspan heat transfer data were obtained on the rotor and stator for variations in inlet turbulence, rotor-stator axial spacing, and rotor incidence.

Dring, Robert P.↗

NASA NTRS1988

DATAC bus monitor

The Digital Autonomous Terminal Access Communications (DATAC) bus is a multiple transmitter data bus developed to interconnect various aircraft systems. A typical DATAC bus installation for the NASA B-737 aircraft is shown. A bus monitor unit was developed for the DATAC data bus. The bus monitor unit consists of two systems: A Zilog Z8002 based S100 bus microcomputer system that connects to a DATAC terminal and receives data appearing on the bus, and an IMB PC-compatible computer used to display and interpret that data. Test results of the existing bus monitor have indicated areas for improvement. The most obvious improvement is to increase the speed of the data transfers between the S100 and the MS-DOS systems.

Novacki, Stanley M., III↗

NASA NTRS1988

Reduced-gravity two-phase flow experiments in the NASA KC-135

An adequate understanding is sought of flow and heat transfer behavior in reduced and zero gravity conditions. Microgravity thermal-hydraulic analysis capabilities were developed for application to space nuclear power systems. A series of reduced gravity two phase flow experiments using the NASA KC-135 were performed. The objective was to supply basic thermal hydraulic information that could be used in development of analytical tools for design of space power systems. The experiments are described. Two main conclusions were drawn. First, the tests demonstrate that the KC-135 is a suitable test environment for obtaining two phase flow and heat transfer data in reduced gravity conditions. Second, the behavior of two phase flow in low gravity is sufficiently different from that obtained in 1 g to warrant intensive investigation of the phenomenon if adequate analytical tools are to be developed for microgravity conditions.

Cuta, Judith M.↗

NASA NTRS1988

Computational validation of a parabolized Navier-Stokes solver on a sharp-nose cone at hypersonic speeds

Perfect gas computational results from a newly-developed upwind, parabolized Navier-Stokes (PNS) solver are compared with an existing set of experimental laminar results for a 10-deg half-angle circular cone at freestream Mach number of 7.95. Comparisons were performed with surface pressure and heat transfer data, as well as with flowfield pitot measurements. The PNS code predicted the surface quantities accurately up through 20-deg angle-of-attack, including crossflow separation, and correctly defined the location of the bow shock and the edge of the boundary layer. The importance of cell Reynolds number, grid density, and thermal boundary conditions to the accurate prediction of the flowfield are examined through numerical emamples.

Huebner, Lawrence D.↗