Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DISCHARGE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Influence of oxygen traces on an atmospheric-pressure radio-frequency capacitive argon plasma discharge

An atmospheric-pressure capacitive discharge source driven by radio-frequency power supply at 13.56 MHz has been developed experimentally that is capable of producing a homogeneous and cold glow discharge in O{sub 2}/Ar. With respect to the influence of oxygen component when diluted into argon plasma discharge on the discharge characteristics, the measurements of the electrical parameters (impedance, phase angle, resistance, and reactance) are made systematically and the densities of the metastable and resonant state of argon are determined by means of optical emission spectroscopy (OES). It is shown that the admixture of oxygen into argon plasma not only changes the electric characteristics but also alters the optical emission spectra greatly due to strong interaction between the oxygen content and the argon in the plasma environment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Criteria of radio-frequency ring-shaped hollow cathode discharge using H{sub 2} and Ar gases for plasma processing

In order to achieve high-density capacitively coupled plasma, a radio-frequency (RF) ring-shaped hollow cathode discharge has been developed as a candidate for processing plasma sources. The plasma density in the hollow cathode discharge reaches a high magnitude of 10{sup 10}-10{sup 11} cm{sup -3}. The RF ring-shaped hollow cathode discharge depends on the pressure and mass of the working gas. Criteria required for producing a RF ring-shaped hollow cathode discharge have been investigated for various gas pressures using H{sub 2} and Ar gases for high-density plasma production. The results reveal that the criteria for the occurrence of the hollow cathode effect are that the trench width should be approximately equal to the sum of the electron-neutral mean free paths and twice the sheath thickness of the RF powered electrode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Similarity-based scaling networks for capacitive radio frequency discharge plasmas

We demonstrate similarity-based scaling networks for capacitive radio frequency (RF) plasmas, which extensively correlate discharge characteristics under varied conditions, incorporating the transition from original to similarity states. Based on fully kinetic particle-in-cell simulations, similar RF discharges in argon are demonstrated with three external control parameters (gas pressure, gap distance, and driving frequency) simultaneously tuned. A complete set of scaling pathways regarding fundamental discharge parameters is obtained, from which each plasma state finds its neighboring node with only one control parameter tuned. The results from this study provide a promising strategy for plasma multi-parameter mapping, enabling effective cross-comparisons, prediction, and manipulation of RF discharge plasmas.

36 MATERIALS SCIENCE↗

Stationary structure of a high-frequency discharge maintained by a distributed electromagnetic source in the presence of an external magnetic field

The stationary structure of an axisymmetric high-frequency discharge maintained by a given source in an external dc magnetic field is investigated. The source is assumed to be a current wave that travels over the discharge tube surface in the direction of the external magnetic field. The source current has a single azimuthal component and its frequency belongs to the lower hybrid range. The main emphasis is placed on the special case where the electron heat conduction length across the external magnetic field exceeds considerably the tube radius. The dependences of discharge plasma parameters on the current amplitude and propagation constant along the tube have been found for this case. The results of numerical calculations of the distributions of the field and the power of the Joule loss in a discharge are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Increased stream discharge after the 3 September 2016 M w 5.8 Pawnee, Oklahoma earthquake

Earthquakes influence hydrogeological processes and properties in Earth's crust, some of which affect surface waters. Here we document increased discharge in a stream after the 3 September 2016 M w 5.8 earthquake near Pawnee, Oklahoma, an event likely induced by underground wastewater disposal. Discharge increased by an order of magnitude and remained elevated until the change was obscured by rain 1 week later. Given the earthquake magnitude and distance from the stream, by comparison with previous examples of responses to earthquakes, increased discharge after this earthquake is expected. While the mechanism increasing discharge cannot be confirmed, the observations require changes in physical properties of the subsurface. Fluid injection may thus influence hydrogeological properties of shallow groundwater systems and aquifers indirectly by inducing seismicity, if the induced seismic events are large enough.

58 GEOSCIENCES↗

Number of lightning discharges causing damage to lightning arrester cables for aerial transmission lines in power systems

Damage by lightning discharges to lightning arrester cables for 110-175 kV aerial transmission lines is analyzed using data from power systems on incidents with aerial transmission lines over a ten year operating period (1997-2006). It is found that failures of lightning arrester cables occur when a tensile force acts on a cable heated to the melting point by a lightning current. The lightning currents required to heat a cable to this extent are greater for larger cable cross sections. The probability that a lightning discharge will develop decreases as the amplitude of the lightning current increases, which greatly reduces the number of lightning discharges which damage TK-70 cables compared to TK-50 cables. In order to increase the reliability of lightning arrester cables for 110 kV aerial transmission lines, TK-70 cables should be used in place of TK-50 cables. The number of lightning discharges per year which damage lightning arrester cables is lowered when the density of aerial transmission lines is reduced within the territory of electrical power systems. An approximate relationship between these two parameters is obtained.

42 ENGINEERING↗

The effect of oxygen and water vapor on nitric oxide conversion with a dielectric barrier discharge reactor

The effect of O{sub 2} and H{sub 2}O vapor on the Nitric oxide (NO) removal rate, the NO{sub 2} generation rate and the discharge characteristics were investigated using the dielectric barrier discharge (DBD) reactor at 1 atm pressure and at room temperature (20{sup o}). The results showed that the O{sub 2} present in the flue gas always hampered the removal of NO and the generation of N{sub 2}O, but that the O{sub 2} could enhance the generation of NO{sub 2} in the NO/N{sub 2}/O{sub 2} mixtures. Furthermore, with the increase of oxygen, the average discharge current gradually decreases in the reactor. The H{sub 2}O present in N-2/NO hindered the removal of NO and the generation of NO{sub 2} but had no impact on the average discharge current in the reactor in the NO/N{sub 2}/H{sub 2}O mixtures in which the HNO{sub 2} and HNO{sub 3} was detected. The energy efficiency of the DBD used to remove the NO from the flue gas was also estimated.

01 COAL, LIGNITE, AND PEAT↗

Physical Kinetics of Electrons in a High-Voltage Pulsed High-Pressure Discharge with Cylindrical Geometry

Results of theoretical modeling of the phenomenon of a high-voltage discharge in nitrogen at atmospheric pressure are presented, based on a consistent kinetic theory of the electrons. A mathematical model of a nonstationary high-pressure discharge has been constructed for the first time, based on a description of the electron component from first principles. The physical kinetics of the electrons are described with the help of the Boltzmann kinematic equation for the electron distribution function over momenta with only ionization and elastic collisions taken into account. A detailed spatiotemporal picture of a nonstationary discharge with runaway electrons under conditions of coaxial geometry of the gas diode is presented. The model describes in a self-consistent way both the process of formation of the runaway electron flux in the discharge and the influence of this flux on the rate of ionization processes in the gas. Total energy spectra of the electron flux incident on the anode are calculated. The obtained parameters of the current pulse of the beam of fast electrons correlate well with the known experimental data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Positive Column of a High-Modulation Depth Discharge Current Without Stepwise Ionization

The positive column of a gas discharge in helium is investigated for high-modulation-depth discharge current without stepwise ionization. The electron energy distribution function for different discharge current oscillation phases, the electron concentration, and the longitudinal electric field strength are measured in helium gas-discharge plasma. The electric field modulation effect and the change of the electron energy distribution function over the period at frequencies less than the reciprocal ambipolar diffusion time are detected.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Atmospheric-pressure solution-cathode glow discharge: A versatile ion source for atomic and molecular mass spectrometry

We report an atmospheric-pressure solution-cathode glow discharge (SCGD) has been evaluated as an ion source for atomic, molecular, and ambient desorption/ionization mass spectrometry. The SCGD consists of a direct-current plasma, supported in the ambient air in the absence of gas flows, and sustained upon the surface of a flowing liquid cathode. Analytes introduced in the flowing liquid, as an ambient gas, or as a solid held near the plasma are vaporized and ionized by interactions within or near the discharge. Introduction of acidic solutions containing metal salts produced bare elemental ions as well as H 2 O, OH - and NO 3 - adducts. Detection limits for these elemental species ranged from 0.1 to 4 ppb, working curves spanned more than 4 orders of linear dynamic range, and precision varied between 5 and 16% relative standard deviation. Small organic molecules were also efficiently ionized from solution, and both the intact molecular ion and fragments were observed in the resulting SCGD mass spectra. Fragmentation of molecular species was found to be tunable; high discharge currents led to harder ionization, while low discharge currents produced stronger molecular-ion signals. Ambient gases and solids, desorbed by the plasma from a glass probe, were also readily ionized by the SCGD. Indeed, strong analyte signals were obtained from solid samples placed at least 2 cm from the plasma. These findings indicate that the SCGD might be useful also for ambient desorption/ionization mass spectrometry. In conclusion, combined with earlier results that showed the SCGD is useful for ionization of labile biomolecules, the results here indicate that the SCGD is a highly versatile ion source capable of providing both elemental and molecular mass-spectral information.

74 ATOMIC AND MOLECULAR PHYSICS↗

Plasma decay in hydrocarbons and hydrocarbon- and H 2 O-containing mixtures excited by high-voltage nanosecond discharge at elevated gas temperatures

Plasma decay after a high-voltage nanosecond discharge was experimentally and numerically studied in pure hydrocarbons (C 2 H 6 and C 3 H 8 ), and H 2 O:N 2 and C 3 H 8 :O 2 mixtures for pressures in the range 2–4 Torr and gas temperatures from 300 to 600 K. In a stoichiometric C 3 H 8 :O 2 mixture, plasma decay was also studied in a repetitively pulsed discharge for varing numbers of discharge pulses (varying degrees of fuel oxidation). The rate of plasma decay was determined from the temporal evolution of electron density measured using the microwave interferometer. It was observed that gas heating to 600 K leads to a decrease in the rate of plasma decay in all cases. The effect of heating on plasma decay was most profound in the H 2 O:N 2 mixture (after a single discharge pulse) and in the C 3 H 8 :O 2 mixture for high degrees of fuel oxidation. A kinetic scheme was developed to numerically simulate the plasma decay in hydrocarbons and combustible mixtures. Numerical analysis showed that, under the conditions studied, plasma decay was controlled by dissociative electron recombination with simple molecular and cluster ions. Gas heating led to a decrease in the rate of the electron-ion recombination and the rate of conversion of molecular ions to cluster ions. As a result, the gas temperature increase caused a decrease in the fraction of cluster ions for which the recombination coefficients are an order of magnitude higher than the recombination coefficients for molecular ions. The influence of gas heating on the decrease of the amount of cluster ions was more important when the ion composition was dominated by hydrated H 3 O + (H 2 O) k ions. The rates of the formation of these ions are extremely sensitive to any variations in gas temperature. A result, in agreement with our observations, gas heating led to an anomalous decrease in the rates of plasma decay in the H 2 O:N 2 mixture, as well as in the C 3 H 8 :O 2 mixture when H 2 O molecules were produced due to fuel oxidation.

20 FOSSIL-FUELED POWER PLANTS↗

Repetitively pulsed nanosecond discharge plasma decay in propane–oxygen gas mixture in the presence of a heating electric field

Plasma decay in the afterglow of a repetitively pulsed nanosecond discharge in a stoichiometric propane–oxygen mixture was experimentally investigated when a weak heating DC electric field was applied and in its absence. The discharge was ignited at room gas temperature and a pressure of 1–2 Torr and was characterized by low specific energy inputs (<0.004 eV per molecule in one pulse). Using microwave interferometry, the temporal evolution of the electron density during plasma decay was studied, and the effective recombination coefficients were obtained from data processing. It was shown that the rate of plasma decay behaved in a non-monotonic manner with increasing degree of propane oxidation; at first the decay rate grew, then passed through a maximum, fell and saturated in the limit of a large (~2000) number of pulses. In this limit, the effect of the heating DC electric field on the plasma decay decreased with approaching chemical equilibrium. Numerical simulation of the observed effects was performed for low and high oxidation degrees of propane taking into account changes in the composition of positive ions in the plasma. Good agreement was obtained between measurements and calculations of the electron density during plasma decay in these cases. Here it was shown that the formation of cluster ions in the discharge afterglow plays a fundamental role. The plasma decay was controlled by electron recombination with hydrocarbon cluster ion at low oxidation degree of propane and with water cluster (hydrated) ions at high oxidation degree. A hypothesis was proposed to explain the observed nonmonotonic behavior of the plasma decay rate with an increase in the propane oxidation in the discharge, based on the formation of hydrated hydrocarbon ions C x H y + (H 2 O) k at moderate oxidation degrees.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of a transparent water-cooled cathode on the neutron production rate in the glow discharge-type fusion neutron source

In glow discharge-type deuterium–deuterium fusion neutron sources, fusion reactions occurring on the cathode surface contribute significantly to the neutron production rate (NPR); therefore, cathode design plays a crucial role in enhancing NPR. Although the NPR generally increases with discharge current, deuterium desorption caused by cathode heating tends to stagnate it in the high-current regime. Water cooling has been shown to mitigate this stagnation for nontransparent cathodes, but its effectiveness for transparent cathodes has not been experimentally clarified. Here, in this study, a transparent cathode with active water cooling and a spherical geometry was designed and fabricated using stainless steel tubing. Neutron production experiments were conducted with and without water cooling: with water cooling, applied voltages of 20–40 kV were investigated, while without water cooling, the applied voltage was limited to 25 kV. The results showed that the NPR increased continuously with discharge current without stagnation when water cooling was applied. A maximum NPR of (1.8 ± 0.02) × 10 6 n/s was achieved at 40 kV and 50 mA. Compared with our previously reported disk cathode and nontransparent water-cooled cathode of the same diameter, the transparent water-cooled cathode exhibited a significantly enhanced NPR. These findings indicate that combining cathode transparency with active cooling is an effective strategy for improving neutron production in glow discharge-type fusion neutron sources.

43 PARTICLE ACCELERATORS↗

Discharge rate measurements for Micromegas detectors in the presence of a longitudinal magnetic field

We present first discharge rate measurements for Micromegas detectors in the presence of a high longitudinal magnetic field in the GeV kinematical region. Measurements were performed by using two Micromegas detectors and a photon beam impinging a CH{sub 2} target in the Hall B of the Jefferson Laboratory. One detector was equipped with an additional GEM foil, and a reduction of the discharge probability by two orders of magnitude compared to the stand-alone Micromegas was observed. The detectors were p laced in the FROST solenoid providing a longitudinal magnetic field up to 5T. It allowed for precise measurements of the discharge probability dependence with a diffusion-reducing magnetic field. Between 0 and 5T, the discharge probability increased by a factor of 10 for polar angles between 19{degrees} and 34{degrees}. A GEANT4-based simulation developed for sparking rate calculation was calibrated against these data in order to predict the sparking rate in a high longitudinal magnetic field environment. This simulati on is then used to investigate the possible use of Micromegas in the Forward Vertex Tracker (FVT) of the future CLAS12 spectrometer. In the case of the FVT a sparking rate of 1Hz per detector was obtained at the anticipated CLAS12 luminosity.

CLAS↗

Quantitative Analysis of Electrochemical and Electrode Stability with Low Self-Discharge Lithium-Sulfur Batteries

The viability of employing high-capacity sulfur cathodes in building high-energy-density lithium-sulfur batteries is limited by rapid self-discharge, short shelf life, and severe structural degradation during cell resting (static instability). Unfortunately, the static instability has largely been ignored in the literature. Here, we present in this letter a long-term self-discharge study by quantitatively analyzing the control lithium-sulfur batteries with a conventional cathode configuration, which provides meaningful insights into the cathode failure mechanisms during resting. Utilizing the understanding obtained with the control cells, we design and present low self-discharge (LSD) lithium-sulfur batteries for investigating the long-term self-discharge effect and electrode stability.

25 ENERGY STORAGE↗

Chaotic characteristics of corona discharges in atmospheric air

A point-plane electrode system in atmospheric air is established to investigate the mechanism of the corona discharge. By using this system, the current pulses of the corona discharges under the 50 Hz ac voltage are measured using partial discharge (PD) measurement instrument and constitute the point-plane voltage-current (V-I) characteristic equation together with the voltage. Then, this paper constructs the nonlinear circuit model and differential equations of the system in an attempt to give the underlying dynamic mechanism based on the nonlinear V-I characteristics of the point-plane corona discharges. The results show that the chaotic phenomenon is found in the corona circuit by the experimental study and nonlinear dynamic analysis. The basic dynamic characteristics, including the Lyapunov exponent, the existence of the strange attractors, and the equilibrium points, are also found and analyzed in the development process of the corona circuit. Moreover, the time series of the corona current pulses obtained in the experiment is used to demonstrate the chaotic characteristics of the corona current based on the nonlinear dynamic circuit theory and the experimental basis. It is pointed out that the corona phenomenon is not a purely stochastic phenomenon but a short term deterministic chaotic activity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Computational electrodynamic simulation of direct current discharge

A drift-diffusion model for simulating direct current discharge including the externally applied magnetic field is analyzed by a high-resolution, diagonally dominant numerical procedure. Three different configurations of direct current discharge were studied numerically--the electrodynamic structures of the classic parallel electrodes of infinite and finite dimension, as well as the side-by-side electrode configurations. In the final configuration, an externally applied transverse magnetic field has also been applied in computational simulation to study the Lorentz force effect to the discharge structure. The solutions were compared to classic results, similar numerical simulations, and experimental observations of the discharge physics. Overall, the agreement is very good and the model can be used as a basis for the design of flow control experiments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Self-excited nonlinear plasma series resonance oscillations in geometrically symmetric capacitively coupled radio frequency discharges

At low pressures, nonlinear self-excited plasma series resonance (PSR) oscillations are known to drastically enhance electron heating in geometrically asymmetric capacitively coupled radio frequency discharges by nonlinear electron resonance heating (NERH). Here we demonstrate via particle-in-cell simulations that high-frequency PSR oscillations can also be excited in geometrically symmetric discharges if the driving voltage waveform makes the discharge electrically asymmetric. This can be achieved by a dual-frequency (f+2f) excitation, when PSR oscillations and NERH are turned on and off depending on the electrical discharge asymmetry, controlled by the phase difference of the driving frequencies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗