SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Convenient fixture for testing infrared detector integrated circuits, such as those used in surveying sensors, optical communications, receivers, optical power meters, and noncontacting thermometers. Includes electrical connections for 42-pin dual-in-line package (DIP), thermal connection to cryogenic probe, and optical filter. Using fixture, electrical and optical properties of detector measured at 4 K.
An automatic dross removal apparatus is disclosed for removing dross from the surface of a solder bath in an automated electric component handling system. A rotatable wiper blade is positioned adjacent the solder bath which skims the dross off of the surface prior to the dipping of a robot conveyed component into the bath. An electronic control circuit causes a motor to rotate the wiper arm one full rotational cycle each time a pulse is received from a robot controller as a component approaches the solder bath.
The geomagnetic control of the Earth's atmosphere is well understood. In the F-region and the topside ionosphere, non-electrical forces transport plasma along the magnetic field lines only. In consequence, the worldwide distribution of ionization is strongly dependent on the dip angle. For example, the equatorial anomaly is roughly symmetrical about the dipole equator rather than the geographic. The same appears to be the case in the Jovian ionosphere (Mahajan, 1981). The influence of the magnetic field of Jupiter on its ionization pattern is one of several outstanding topics which need to be studied. Tan (1986) investigated the formation of the equatorial anomaly in the Jovian ionosphere under a centered dipole model. Tan (1988) further studied the effect of the tilt of the Jovian dipole. The results were in broad agreement with those of a diffusive equilibrium model (Tan and Wu, 1981). An off-centered dipole model is constructed and its effects on the ionization pattern are investigated.
Many aspects of solar activity are believed to be due to the stressing of the coronal magnetic field by footpoint motions at the photosphere. The results are presented of a fully spectral numerical simulation which is the first 3-D time dependent simulation of footpoint stressing in a geometry appropriate for the corona. An arcade is considered that is initially current-free and impose a smooth footpoint motion that produces a twist in the field of approx 2 pi. The footprints were fixed and the evolution was followed until the field relaxes to another current-free state. No evidence was seen for any instability, either ideal or resistive and no evidence for current sheet formation. The most striking feature of the evolution is that in response to photospheric motions, the field expands rapidly upward to minimize the stress. The expansion has two important effects. First, it suppresses the development of dips in the field that could support dense, cool material. For the motions assumed, the magnetic field does not develop a geometry suitable for prominence formation. Second, the expansion inhibits ideal instabilities such as kinking. The results indicate that simple stearing of a single arcade is unlikely to lead to solar activity such as flares or prominences. Effects are discussed that might possibly lead to such activity.
Tests were performed to determine if thermal shocking is destructive to glass-to-metal seal microelectronic packages and if thermal shock step stressing can compare package reliabilities. Thermal shocking was shown to be not destructive to highly reliable glass seals. Pin-pull tests used to compare the interfacial pin glass strengths showed no differences between thermal shocked and not-thermal shocked headers. A 'critical stress resistance temperature' was not exhibited by the 14 pin Dual In-line Package (DIP) headers evaluated. Headers manufactured in cryogenic nitrogen based and exothermically generated atmospheres showed differences in as-received leak rates, residual oxide depths and pin glass interfacial strengths; these were caused by the different manufacturing methods, in particular, by the chemically etched pins used by one manufacturer. Both header types passed thermal shock tests to temperature differentials of 646 C. The sensitivity of helium leak rate measurements was improved up to 70 percent by baking headers for two hours at 200 C after thermal shocking.
Dynamic isotope power system (DIPS) alternatives were investigated and characterized for the surface mission elements associated with a lunar base and subsequent manned Mars expedition. System designs based on two convertor types were studied. These systems were characterized parametrically and compared over the steady-state electrical output power range 0.2 to 20 kWe. Three methods of thermally integrating the heat source and the Stirling heater head were considered, depending on unit size. Figures of merit were derived from the characterizations and compared over the parametric range. Design impacts of mission environmental factors are discussed and quantitatively assessed.
Planning for future planetary exploration missions indicates that there are continuing, long range requirements for nuclear power, and in particular radioisotope-based power sources. In meeting these requirements, there is a need for higher efficiency, lower mass systems. Four technology areas currently under development that address these goals are described: modular RTG, modular RTG with advanced thermoelectric materials, dynamic isotope power system (DIPS), and the Alkali Metal Thermoelectric Converter (AMTEC).
A regional geometrical model for the Whipple-Buckskin-Bullard detachment system (referred to as the Whipple detachment system) is developed. Mineral separates from samples collected in the Harquahala and Buckskin mountains, which lie in the footwall of the Whipple detachment system, are analyzed by the Ar-40/Ar-39 age spectrum technique to determine the cooling history of the mountain range and the age of the metamorphism. Based on the cooling history of the mountains and the bedrock geology of the Harquahala Mountains, the initial geometry of the Whipple detachment system is reconstructed. Next, estimates of slip on the detachment fault and extension within the upper plate terrane are used to determine the regional pattern of extension. The data on the cooling history, structural geometry, and extension pattern are combined into a geometrical model which reconciles the geological data, according to which the breakaway zones represented by the Harquahala Mountains were unroofed by movement on the gently to moderately dipping segment of a great normal fault system as it cut through the upper crust.
The variability in a 13-year time series of daily values of the relative angular momentum of the atmosphere (M) is separated into three frequency bands: intraseasonal, seasonal, and interannual. Two methods are used to achieve this separation, and the amount of variance attributable to intraseasonal fluctuations, in particular, is sensitive to the choice made. Seasonal time scales clearly dominate the global momentum series; included in this frequency band is a notable dip in the series early in almost every calendar year. To localize the sources of the frequency band-dependent fluctuations in M, the data were decomposed into series of angular momentum values within each of 46 equal-area zonal belts over the globe and covariances were formed between these belt series and M. Seasonal variations in M represent the residual of opposing contributions from the subtropical jets of the Northern and the Southern Hemispheres. Both intraseasonal and interannual variations in M result mostly from behavior in the tropics.
The present evaluation of surface brightness profiles and color-magnitude diagrams for 18 rich star clusters in the LMC, whose ages range from 10 million to 1 billion years, notes that while the profiles of the older clusters are representable by models with King-like cores, those of many younger clusters resist such modeling in virtue of bumps, sharp 'shoulders', and central dips. If the clusters have undergone violent relaxation, then the small cores of the youngest ones may be indicative of formation from relatively 'cool' initial conditions. The sharp shoulders would then point point toward 'warmer' initial conditions, although they are alternatively explainable as signatures of merging subcondensations.
The evolution of the Venus small-scale waves as they propagate into the nightsite is examined, and the small-scale structures are compared with the waves in the three components of the magnetic field, magnetic dip angle, and neutral density. It is demonstrated that the small-scale fluctuations evolve between the transterminator and antisolar regions. It is shown that atmospheric gravity waves may also be producing some of the fluctuations observed at longer wavelengths. The electron temperature and density are shown to be approximately 180 deg out of phase and exhibiting the highest correlation of any pair of variables. Waves in the electron and neutral densities are found to be correlated moderately on most orbits, while the average electron temperature is higher when the average magnetic field is more horizontal.
An intelligent remote power controller (RPC) based on microcomputer technology can implement advanced functions for the accurate and secure detection of all types of faults on a spaceborne electrical distribution system. The intelligent RPC will implement conventional protection functions such as overcurrent, under-voltage, and ground fault protection. Advanced functions for the detection of soft faults, which cannot presently be detected, can also be implemented. Adaptive overcurrent protection changes overcurrent settings based on connected load. Incipient and high-impedance fault detection provides early detection of arcing conditions to prevent fires, and to clear and reconfigure circuits before soft faults progress to a hard-fault condition. Power electronics techniques can be used to implement fault current limiting to prevent voltage dips during hard faults. It is concluded that these techniques will enhance the overall safety and reliability of the distribution system.
Topographic profiles for planetary wrinkle ridges compiled from high-resolution Lunar Topographic Orthophoto maps for the moon and from monoscopic photoclinometry data for Mars reveal that many of these ridges are characterized by an elevation offset between one side of a ridge and the other. To investigate the relative importance of faulting and folding in the formation of planetary wrinkle ridges, this paper develops a model of subsurface structure, based on observations and measurements of surface physiography and topography by Golombek and Franklin (1987) and Plescia (1990), and assumptions of subsurface structure, which makes it possible to estimate shortening across wrinkle ridges on Moon and Mars. According to this model, total ridge shortening is on the order of 100 m; shortening due to faulting exceeds shortening due to folding for fault dips up to 60-80 deg, implying that faults beneath many wrinkle ridges break the surface to accomodate the greater displacement along the fault than is accomodated in the fold.
A parametric study of a Mach 8 fin-induced shock interaction with a turbulent boundary layer was performed in a shock tunnel using surface oil-dot visualization and surface pressure measurements. The study showed that the interaction was separated and secondary separation was detected for the strongest cases studied. Although the inviscid shock wave was close to the fin, the interaction was spread over large angular extents. The interaction showed inception to conical symmetry at the highest shock strengths. Additionally, the surface pressure distribution showed an extensive plateau region, with no distinct dip associated with strongly separated interactions. Between the fin and the inviscid shock, the surface pressure rose rapidly but did not approach the downstream inviscid shock, the surface pressure rose rapidly but did not approach the downstream inviscid value.
At about 14,800 km from the Comet Halley nucleus, on the inbound leg, at least six of the sensors onboard the Giotto spacecraft observed an unusual, brief (about 30 to 500 ms) event: the ion-mass spectrometer data show a brief flow of energetic (up to several hundred electron volts) plasma consisting of protons, water group, and heavier ions. The Johnstone plasma analyzer data show a short burst of plasma, while the dust impact detector system data show an impact event in four of its detectors. The magnetometer signature of the event shows two brief dips in the field. The sudden change in the spacecraft attitude and spin rate observed by the camera at that same time has been interpreted as the result of a large (5 mg or more) dust-particle impact on the front bumper shield of the spacecraft. In addition, at about the same time the spacecraft star-tracker suffered damage. The report combines direct measurements of the composition and dynamics of a dust-impact plasma cloud, the dust particle mass, and the location of the impact on the spacecraft. Analysis of the data indicate that the impacting particle was water or ice-bearing, possibly loosely compared, and was composed of one or more of: carbon, nitrogen, and silicon.
The observational characteristics of X-ray bursts are reviewed and the thermonuclear-flash model is examined to assess the suitability of the model and the sources of X- and gamma-ray bursts. The profiles of X-ray bursts from five different sources are delineated, and the global analysis of nuclear burning is discussed to review th range possible X-ray burst behavior. The analysis by Fushiki and Lamb (1987) is noted for the description of regions which lie away from the steady-state cut. The discussion of cyclotron lines in gamma-ray bursts emphasizes the source GB880205, and it is shown that Raman and cyclotron resonant scattering can explain the observed positions, strengths, and widths of the dips in the spectrum. X-ray bursts are theorized to emanate from weakly magnetic neutron stars, and gamma-ray bursts are shown to be the products of strongly magnetic neutron stars.
Three micron spectra of three premain-sequence stellar objects are presented. The heavily embedded infrared source HH100-IR, and two optically visible stars that apparently power the Herbig-Haro objects HH52, 53, 54, and HH57, are likely to represent different stages during early stellar evolution. The medium-resolution spectra of HH100-IR confirm the existence of a very strong ice band absorption (optical depth 0.8-1.2 at 3.07 microns) discovered by Whittet & Blades MNRAS, 191, 309 (1980) with lower resolution. Each of the visible stars shows a weaker (optical depth 0.2-0.4) water-ice feature but with a relatively prominent absorption dip at 2.97 microns which it is believed is due to ammonia ice. A detailed inspection of the line profiles suggests that the environment around the optically visible stars is significantly warmer (about 100 K) than that around HH100-IR (about 10-20 K) and that processing of remnant circumstellar dust is already underway.
The eclipsing RS CVn system AR Lac (G2IV + K0IV) has been observed continuously for one 2-day binary cycle with the Exosat observatory. Below 1 keV, a factor of two intensity modulation is seen with a flat bottomed minimum around the time of primary eclipse and a shallow dip preceeding primary eclipse. Above 1 keV, where only emission with temperatures greater than 10 exp 7 K would be detected, no orbital modulation or eclipse is seen. This suggests that the greater than 20 million degree emission comes from a large region, comparable in size to the binary separation. The modulation in the less than 1 keV lightcurve has been modeled by chi-squared fitting to X-ray bright spots and by using maximum entropy deconvolution. The lower temperature emission is found to originate in compact regions with a pressure and temperature similar to that of the flaring sun.