Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DFT Calculations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Topological electronic structure of YbMg 2 Bi 2 and CaMg 2 Bi 2

Zintl compounds have been extensively studied for their outstanding thermoelectric properties, but their electronic structure remains largely unexplored. Here, we present a detailed investigation of the electronic structure of the isostructural thermopower materials YbMg 2 Bi 2 and CaMg 2 Bi 2 using angle-resolved photoemission spectroscopy (ARPES) and density functional theory (DFT). The ARPES results show a significantly smaller Fermi surface and Fermi velocity in CaMg 2 Bi 2 than in YbMg 2 Bi 2 . Our ARPES results also reveal that in the case of YbMg 2 Bi 2 , Yb- 4 f states reside well below the Fermi level and likely have a negligible impact on transport properties. To properly model the position of 4f-states, as well as the overall electronic structure, a Hubbard U at the Yb sites and spin-orbit coupling (SOC) have to be included in the DFT calculations. The theoretical results reveal that both materials belong to a Z 2 topological class and host topological surface states around EF. Due to the intrinsic hole doping, the topological states reside above the Fermi level, inaccessible by ARPES. Our results also suggest that in addition to SOC, vacancies and the resulting hole doping play an important role in the transport properties of these materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Characterization of Lanthanum Monazite Surface Chemistry and Crystal Morphology through Density Functional Theory and Experimental Approaches

Monazite is a rare earth element (REE)-containing mineral that consists of (REE)PO 4 formal units and is one of the most important sources of these critical materials. The concentration of REEs from mined monazite ore often involves froth flotation, which is a beneficiation process that enhances the efficiency of downstream processing. The effectiveness of froth flotation is largely governed by the ability of collector agents to selectively bind to monazite particles. Thus, a molecular-level understanding of monazite interfacial chemistry is integral to the design of effective collector agents. To address this need, we performed density functional theory (DFT) calculations and a variety of experimental techniques to characterize La-monazite and elucidate its crystal morphology. Interestingly, we find minimal differences in the predicted morphologies of La-monazite for hydrous and anhydrous environments, which are largely dominated by low-index facets (e.g., {110}, {100}, and {010}). Indexing of synthesized La-monazite crystals via X-ray diffraction also uncovers {110} and {100} as the predominant facets. The average surface energies of 0% and 100% water coverage La-monazite crystals were predicted to be 0.87 and 0.76 J/m 2 , respectively, while calorimetry suggests values of 1.30 and 1.15 J/m 2 , respectively. The apparent discrepancies between the theoretical and experimental values are expected and attributed to defects present in physical crystals, in contrast to the perfect mineral surfaces in simulations. The difference in surface energy between the 0% and 100% water coverage morphologies predicted by theory is consistent with the value measured via calorimetry. DFT reveals a wide range of adsorption energies for water across the studied facets, but in all cases, water is predicted to strongly bind to monazite surfaces with an average adsorption energy of -92.7 kJ/mol for a La-monazite single crystal. Finally, this study provides the groundwork necessary for the rational design of froth flotation collector agents by granting molecular-level insight into the predominant facets of monazite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Utilizing metal cation reactions with carbonyl sulfide to remove isobaric interferences in tandem inductively coupled plasma mass spectrometry analyses

Carbonyl sulfide (OCS) was used as a reaction gas to investigate gas phase metal (M + ) ion-molecule reactions using the Agilent 8900 inductively coupled plasma tandem mass spectrometer (ICP-MS/MS) to yield insight on how this gas may be used to remove isobaric interferences in analytical measurements. The experimental work was paired with density functional theory (DFT) calculations of the reaction enthalpy to predict whether M + will react with OCS. A multi-element standard containing 46 elements ranging from 9 to 208 u was analyzed in the presence and absence of OCS. When a reaction was observed, the dominant product was the sulfide (MS + ). Oxide products were also observed for many M + but formation was less efficient with OCS than previously observed with other reaction gases. This is likely due to the weaker OC-S bond that makes MS + formation more favorable. Increasing the flow rate from 0.1 to 0.2 mL/min (corresponding to a change in reaction gas pressure from 0.35 to 0.53 Pa (2.6 to 4.0 mTorr)) generally resulted in greater MS + production, including the secondary product MS 2 + for a few cations. The early lanthanide series ions (La + , Ce + , Pr + and Nd + ) produced greater quantities of MO + at the higher pressure, although MS + products were still the dominant product. The DFT-predicted reaction enthalpies were consistent with the observed sulfide formation, with an accuracy >90%; however, model predictions were less accurate for the minor and higher order products (< 77% for MO + ). Finally, the work presented here continues a systematic study of ion-molecule reactions in ICP-MS/MS to understand and develop new and novel ways to analyze complex mixtures with minimal pre-analysis treatment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Theory Guided Fine‐Tune of Strain Effects in Pt Ternary Alloy via Rare Earth Templating: Achieving High Performance PEMFCs Catalysts

The sluggish kinetics and insufficient durability of platinum-based catalysts remain crucial barriers limiting proton-exchange-membrane fuel cells (PEMFCs) deployment. Here, we report a theory-guided synthesis combined with rare-earth templating to realize a previously inaccessible Pt 5 Co-like phase with tailored atomic-scale strain. Guided by density functional theory (DFT) calculations, we identified that a Pt 5 Co-like sublayer can induce a unique mild compressive strain (−1.24%) to the Pt(111) shell and an optimal *OH binding energy shift (ΔE ≈ 0.11 eV). This shift positions the alloy catalyst near the apex of the oxygen reduction reaction activity volcano. This prediction guided the synthesis of ternary alloy Pt 5 (Ce)Co@Pt multilayer nanoparticles, featuring a Ce-stabilized core, a Pt 5 Co-like sublayer, and a Pt-rich shell. This catalyst demonstrates both exceptionally high activity and durability, achieving a mass activity of 2.6 A∙mg Pt −1 in rotating disk electrode testing. In fuel cell membrane electrode assembly tests, Pt 5 (Ce)Co@Pt achieves a current density of 1.9 A∙cm −2 at 0.7 V under heavy-duty vehicle conditions. Remarkably, it maintains 1.2 A∙cm −2 after 1 80 000 AST cycles, doubling the U.S. DOE 2025 target. This work demonstrates a rational design strategy that DFT-guided strain engineering integrates with rare-earth templating to advance Pt-based catalysts for fuel cell applications.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

Mechanistic Investigations of Gas-Phase Catalytic Hydrogenation in Metal–Organic Frameworks: Cooperative Activity of the Metal and Linker Sites in Cu x Rh 3– x (BTC) 2

We report the Cu x Rh 3–x (BTC) 2 catalyst (abbreviated CuRhBTC, BTC 3– = benzene tricarboxylate) provides excellent dispersion of active metal sites coupled with well-defined, robust structures for propylene hydrogenation reactions. This material therefore serves as a unique prototype for understanding catalytic activity in metal organic frameworks (MOFs). The mechanism of gas-phase hydrogenation at the bimetallic metal nodes of a MOF has been investigated in detail for the first time using in situ spectroscopy and diffraction experiments combined with density functional theory (DFT) calculations. The reaction occurs via a cooperative process in which the metal and linker sites play complementary roles; specifically, H 2 is dissociated at a Rh 2+ site with a missing Rh–O bond, while protonation of the decoordinated carboxylate linker stabilizes the active sites and promotes H 2 dissociation. In situ X-ray diffraction experiments show that the crystalline structure of the MOF is retained under reaction conditions at 20–100 °C. In situ Raman spectroscopy and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) experiments demonstrate that propylene adsorbs at both Rh 2+ and Cu 2+ sites via π bonding. Cu 2+ is catalytically inactive, but at Rh 2+ sites, a propyl intermediate is observed when H 2 is introduced into the propylene feed. Furthermore, the appearance of the O–H stretch of COOH at ~3690 cm –1 in the DRIFT spectra is characteristic of defects consisting of missing Rh–O bonds. These experimental results are in general agreement with a reaction mechanism proposed by DFT, in which the decoordinated carboxylate linker is protonated, and the active Rh 2+ site remains available for readsorption of reactants in the subsequent catalytic cycle.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Investigating trends in actinide covalency and magnetism with 35/37 Cl SSNMR spectroscopy and first-principles calculations

Solid-state NMR (SSNMR) spectroscopy is a powerful technique for studying actinide chemistry but has been significantly limited due to the complex paramagnetism, and radiological hazards presented by these materials. Lanthanide and actinide salts often feature magnetic ordering and can be paramagnetic, ferromagnetic, or antiferromagnetic depending on temperature and electronic structure. Paramagnetic interactions can manifest in SSNMR both as secular spectral shifts and/or couplings as well as contributions from non-secular relaxation. Both effects can be directly measured with NMR and used to extrapolate rich chemical information such as coordination environments, bonding characteristics, local molecular dynamics, and correlation times. Typically, these studies are carried out on high-γ and highly abundant NMR-active isotopes (e.g., 1 H, 6/7 Li, 19 F, 23 Na, etc.) or on enriched rare isotopes (e.g., 2 H and 17 O), which can be expensive. Herein, we present a facile methodology to measure the 35/37 Cl electric-field gradient (EFG) and paramagnetic shift anisotropy (SA) tensor components using static wideline SSNMR measurements of LaCl 3 , NdCl 3 , UCl 3 , and UCl 4 . The static powder spectra were measured with both 35 Cl and 37 Cl SSNMR to increase the fidelity of the extracted tensor parameters. Variable temperature NMR of a select case confirms the Curie–Weiss paramagnetism. Relaxation measurements of both nuclei further corroborate observations owing to the paramagnetic relaxation enhancement and reveal simultaneous quadrupolar relaxation mechanisms. Density functional theory (DFT) calculations using Hubbard U corrections to the uranium valence orbitals show excellent agreement with experimental EFG tensor parameters and help describe the bonding characteristics in these lanthanide and actinide systems.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Graphite Lithiation under Fast Charging Conditions: Atomistic Modeling Insights

The charging of lithium ion batteries in a fast and safe manner is critical for promoting the mass adoption of electric vehicles. Li intercalation in graphite electrodes is known to be one of the bottlenecks during the fast charging process. The mechanism of Li diffusion in highly polarized graphite anode at high current rates remains, however, not well understood. In this work, Density Functional Theory (DFT) calculations are used to gain insights into the Li diffusion process in graphite when it is far from equilibrium under fast charging conditions. The effect of uncompensated charges on Li mobility is determined in the highly polarized regions of the anode close to the interfaces. The extra charge was found to increase the interlayer spacing in the diffusion layer and adjacent channels, increasing the diffusivity and promoting the formation of Li clusters. A concerted diffusion mechanism at the edge of high-concentration Li domains is proposed to enhance the diffusion of Li.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

A-type antiferromagnetic order in semiconducting EuMg 2 Sb 2 single crystals

Eu-based Zintl-phase materials EuA 2 Pn 2 (A = Mg, In, Cd, Zn; Pn = Bi, Sb, As, P) have generated significant recent interest owing to the complex interplay of magnetism and band topology. Here, we investigated the crystallographic, magnetic, and electronic properties of the layered Zintlphase single crystals of EuMg 2 Sb 2 with the trigonal CaAl 2 Si 2 crystal structure (space group $P\bar{3}m1$). Electrical resistivity measurements complemented with angle-resolved photoemission spectroscopy (ARPES) studies and density functional theory (DFT) calculations find an activated behavior with intrinsic conductivity at high temperatures indicating a semiconducting electronic ground state with a narrow energy gap of 370 meV. Magnetic susceptibility and zero-field heat capacity measurements indicate that the compound undergoes antiferromagnetic (AFM) ordering at the Néel temperature T N = 8.0(2) K. Here, zero-field neutron-diffraction measurements reveal that the AFM ordering is A-type where the Eu spins (Eu 2+ , S = 7/2) arranged in ab-plane layers are aligned ferromagnetically in the ab plane and the Eu spins in adjacent layers are aligned antiferromagnetically. Eu-moment reorientation within the ab planes in the trigonal AFM domains associated with a very weak inplane magnetic anisotropy is also evident below T N at low fields < 0.05 T. Although isostructural semimetallic EuMg 2 Bi 2 is reported to host Dirac surface states, the observation of narrow-gap semiconducting behavior in EuMg 2 Sb 2 implies a strong role of spin-orbit coupling (SOC) in tuning the electronic states of these materials. Our DFT studies also suggest, besides the SOC, the more electronegative and smaller Sb than Bi shifts the low-lying conduction bands along the Γ-A direction to higher energy, resulting in an indirect bulk band gap between the Γ and M points for EuMg 2 Sb 2 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Spectroscopic characterization of a new Re(i) tricarbonyl complex with a thiosemicarbazone derivative: towards sensing and electrocatalytic applications

This work describes the preparation of a new thiosemicarbazone derivative, (Z)- N -ethyl-2-(6-oxo-1,10-phenanthrolin-5(6 H )-ylidene)hydrazinecarbothioamide (phet) and its respective Re( I ) tricarbonyl chloro complex, fac -[ReCl(CO) 3 (phet)]. The spectroscopic, photophysical and electrochemical properties of the new complex were fully investigated through steady state and time-resolved techniques along with computational calculations. In fac -[ReCl(CO) 3 (phet)], the new ligand is coordinated to the metal center through the pyridyl rings of the phenanthroline moiety. The unbound electron pairs in the S atom of the bending thiosemicarbazone group induce new low energy lying electronic transitions. Consequently, enhanced visible light absorption up to 550 nm is observed in acetonitrile due to the overlap between MLCT Re→phet and IL phet(n→π*) transitions. The absorption bands and emission quantum yields of fac -[ReCl(CO) 3 (phet)] are sensitive to proton concentration due to an acid-basic equilibrium in the N atoms of the thiosemicarbazone. Proton dissociation constants of 10.0 ± 0.1 and 11.4 ± 0.2 were determined respectively for the ground and excited states of the new complex. Spectral changes could also be observed in the presence of Zn 2+ cations which can be further explored for sensing applications. The electrochemical behavior of the new complex was studied in detail, revealing up to four one electron reduction processes in the range from 0 to -2.4 V vs. Fc + /Fc. With support of DFT calculations, the first three processes are ascribed to the reduction of the coordinated phet ligand followed by the Re I/0 reduction and consequent Cl - release. Furthermore, the new complex was able to act as an electrocatalyst for CO 2 reduction into CO ( E onset = -1.92 V vs. Fc + /Fc), with a turnover frequency of 2.81 s -1 and turnover number of 24 ± 1 in anhydrous acetonitrile, being the first Re( I ) tricarbonyl complex with a thiosemicarbazone derivative described for this goal. The detailed characterization carried out here can drive the development of new Re( I )-thiosemicarbazone derivatives for different applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Hydrogen separation with a graphenylene monolayer: Diffusion Monte Carlo study

Here, we performed fixed-node diffusion Monte Carlo (DMC) calculations to investigate structural and energetic properties of graphenylene (GPNL), a two-dimensional network of sp 2 -bonded carbon atoms with large near-circular pores, and its H 2 separation performance for gas mixtures. We have found that the energetic stability of a GPNL monolayer is comparable to that of γ-graphyne, as evidenced by its large cohesive energy of 6.755(3) eV/atom. Diffusion barriers of several gas molecules, including hydrogen, through a GPNL membrane were determined from the analysis of their adsorption energies depending on the adsorption distance, which led to our estimation for hydrogen selectivity with respect to other target molecules. DMC hydrogen selectivity of a GPNL monolayer was found to be exceptionally high at 300 K, as high as 10 10 –10 11 against CO and N 2 gases. This, along with high hydrogen permeance due to its generic pore structure, leads us to conclude that GPNL is a promising membrane to be used as a high-performance hydrogen separator from gas mixtures. We find that when compared to our DMC results, DFT calculations tend to overestimate H 2 selectivity, which is mostly due to their inaccurate description of short-range repulsive interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

PFOA catalytic reaction mechanisms on zerovalent iron (Fe 0 ): A DFT investigation

In this study, density functional theory (DFT) calculations with dispersion corrections are employed to investigate catalytic reactions of perfluorooctanoic acid (PFOA) onto zerovalent iron (Fe 0 ). The main goal of this investigation is to explain the reaction mechanisms, including bond dissociation energies, activation barriers, and rate-determining steps (RDSs), of PFOA degradation. Additionally, we aim to reveal the catalytic effects of Fe 0 by comparing the reaction energy profile for the degradation of PFOA both in solution (i.e., isolated) and after adsorption on Fe 0 . Along with investigating previously reported pathways, this study proposes a new PFOA degradation pathway on Fe0. Overall, the results revealed that Fe 0 plays a key role in the catalytic degradation of PFOA, significantly affecting the RDSs and increasing defluorination rates. For instance, the activation barrier for the decarboxylation step significantly decreased from 3.08 eV to 1.11 eV over the Fe0 surface, while the activation barrier for F dissociation decreased from ∼5 eV to 0.54 eV. Additionally, the proposed pathway in this study (i.e., successive defluorination) was found to be the most favorable pathway for PFOA degradation on Fe 0 . Taken together, the DFT results are consistent with reported experimental findings and provide critical insights that will help advance the design of catalysts for PFAS degradation.

Catalysis↗
DOE OSTI2023

Electronic Structure and Mechanical Properties of Solvated Montmorillonite Clay Using Large-Scale DFT Method

Montmorillonite clay (MMT) has been widely used in engineering and environmental applications as a landfill barrier and toxic waste repository due to its unique property as an expandable clay mineral that can absorb water easily. This absorption process rendered MMT to be highly exothermic due to electrostatic interactions among molecules and hydrogen bonds between surface atoms. A detailed study of a large supercell model of structural clay enables us to predict long-term nuclear waste storage. Herein, a large solvent MMT model with 4071 atoms is studied using ab initio density functional theory. The DFT calculation and analysis clarify the important issues, such as bond strength, solvation effect, elasticity, and seismic wave velocities. These results are compared to our previous study on crystalline MMT (dry). The solvated MMT has reduced shear modulus (G), bulk modulus (K), and Young’s modulus (E). We observe that the conduction band (CB) in the density of states (DOS) of solvated MMT model has a single, conspicuous peak at –8.5 eV. Moreover, the atom-resolved partial density of states (PDOS) summarizes the roles played by each atom in the DOS. These findings illuminate numerous potential sophisticated applications of MMT clay.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Thermal Stability of Schottky Contacts and Rearrangement of Defects in β ‐Ga 2 O 3 Crystals

Abstract The thermal stability of different Schottky contacts (Au, Pt, and Ni) on (100) β ‐Ga 2 O 3 single crystals grown by the Czochralski method is investigated. Besides the examination of the Schottky barrier parameters, contact‐dependent defect levels are investigated by deep‐level transient spectroscopy (DLTS) in a 100–650 K (ramp‐up) and 650–100 K (ramp‐down) temperature cycle. Several defect levels are detected below the conduction band minimum at 0.41, 0.60, 0.77, 0.96, and 1.17 eV. In the temperature ramp‐down DLTS, the 1.17 eV level disappears, and the 0.60 eV level appears for all Schottky contacts. DFT calculations suggest that rearrangement and dissociation of a single hydrogen from a doubly‐hydrogenated Ga─O divacancy complex occurs during the temperature sweep under bias. The trap level at 0.96 eV only appears after the thermal load for the Ni contact, in contrast to Au and Pt, where it is present without a thermal budget. Temperature‐dependent leakage current (at −4 V) measurements indicate oxidation of Ni, and further thermodynamic analysis suggests alloying of Au‐Ga atoms at the Au/ β ‐Ga 2 O 3 interface. These studies provide insight into the behavior induced by these common Schottky contacts and the alteration associated with temperature cycling.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Thermoelectric Behavior of Structurally Disordered Lanthanide and Actinide Silicides

Lanthanide and actinide intermetallic materials exhibit intriguing electronic, structural, and magnetic properties arising from their partially filled f orbitals. Strong f-electron correlations can significantly modify the electronic density of states, carrier scattering, and transport behavior, making these systems promising candidates for unconventional thermoelectric materials. In previous studies, single crystals of A1.33T4Al8Si2 (A = Ce, Th, U, Np; T = Co, Ni) were synthesized. This structure consists of ordered TAl2 corrugated double layers separated by disordered An–Si monolayers. The inherent disorder within the An–Si layers has been linked to unusual magnetic behavior, such as spin-glass phenomena, and is expected to strongly influence phonon scattering and charge-carrier transport relevant to thermoelectric performance. However, the thermoelectric properties of this material family have not previously been explored. In this work, DFT calculations were performed to evaluate the electronic density of states, band structures, and thermoelectric properties, including the effects of doping. To validate these predictions, Ce1.33Co4Al8Si2 single crystals were grown and experimentally characterized. Additionally, a new Yb1.33Co4Al8Si2 phase was synthesized and characterized using single-crystal XRD, SEM-EDS, magnetization measurements, and thermoelectric measurements. These results provide insight into structure–property relationships governing thermoelectric behavior in f-electron intermetallics and offer guidance for future thermoelectric materials.

37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗
DOE OSTI2021

Mechanistic Investigation of Dimethylmercury Formation Mediated by a Sulfide Mineral Surface

Mercury (Hg) pollution is a global environmental problem, but many key transformations among 29 various Hg species are not well understood. Although anaerobic microorganisms are the primary 30 producers of monomethylmercury (MMeHg), the abiotic formation of dimethylmercury (DMeHg) 31 from MMeHg have been suggested to account for a large portion of DMeHg in the ocean. It has 32 been shown that abiotic formation of DMeHg from MMeHg can be facilitated by reduced sulfur 33 groups on mineral surfaces. However, a detailed mechanistic understanding of this reaction is 34 lacking. Here we perform density functional theory (DFT) calculations to explore mechanisms of 35 DMeHg formation on the 110 surface of a CdS(s) (hawleyite) nanoparticle. We show that 36 coordination of MMeHg substituents to adjacent reduced sulfur groups protruding from the surface 37 facilitate DMeHg formation and that the reaction proceeds through direct transmethylation from 38 one MMeHg substituent to another. Solvation effects were found to play an important role in the 39 surface reconstruction of the nanoparticle and in decreasing the energetic barrier for DMeHg 40 formation. We also investigate DMeHg formation from MMeHg mediated by organic dithiols and 41 compare the results to those mediated by the mineral surface. In contrast to the surface reaction, 42 the calculations suggest that dithiol-mediated formation of DMeHg instead proceeds through a 43 mechanism in which Hg–Hg interactions activate a methyl group from one MMeHg substituent 44 for intramolecular transfer to the adjacent MMeHg substituent. These findings refine previously 45 proposed mechanisms of abiotic DMeHg formation and fill gaps in our understanding of global 46 Hg cycling in the environment.

Lian, Peng↗
DOE OSTI2020

Selective acetylene hydrogenation over single metal atoms supported on Fe 3 O 4 (001): A first-principle study

Supported single-atom catalysts (SACs) have gained increasing attention for improved catalytic activity and selectivity for industrially-relevant reactions. In this study, we explore the hydrogenation of acetylene over single Pt, Ru, Rh, Pd, and Ir atoms supported on the Fe 3 O 4 (001) surface using density functional theory (DFT) calculations. The thermodynamic profile of H diffusion is significantly changed with the type of single metal atoms used and suggests that H spillover from the single atom dopant to the Fe 3 O 4 (001) surface is favored and will likely lead to high H coverages in the functioning catalyst. Correspondingly, as the surface H coverage increases, the important desorption step of ethylene becomes energetically competitive against the detrimental hydrogenation steps of ethylene to ethane. Overall, we show herein that the selectivity of SACs towards ethylene production can be tuned by considering the proper type of metal and controlling the redox state of the support.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Enhanced Oxide Reduction by Hydrogen at Cuprous Oxide–Copper Interfaces near Ascending Step Edges

We report that understanding the dynamic processes involved in the interaction of hydrogen with oxides is of fundamental importance in catalysis. This paper probes the reduction of Cu 2 O-‘29’ surfaces by hydrogen at room temperature combining in situ ambient pressure scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT) calculations. Reduction of the atomic layer thin Cu 2 O film is observed to be preferentially initiated2 at step edges and terrace defects, where perfect Cu 2 O(111) terraces are found to be stable towards hydrogenation under the same conditions. After a long induction period, regions of partially reduced Cu 2 O-‘29’ and metallic Cu co-exist before the surface is fully reduced to Cu(111). The reduction rate strongly depends on the nature of nearby Cu step edges. We propose a mechanism for the reduction of Cu 2 O-‘29’ by hydrogen where free copper atoms from ascending metallic step edges facilitate the formation of active ensembles for H 2 dissociation and transfer H to the edges of Cu2O regions

08 HYDROGEN↗
DOE OSTI2024

Rationalizing Acidic Oxygen Evolution Reaction over IrO 2 : Essential Role of Hydronium Cation

The development of active, stable, and more affordable electrocatalysts for acidic oxygen evolution reaction (OER) is of great importance for the practical application of electrolyzers and the advancement of renewable energy conversion technologies. Currently, IrO 2 is the only catalyst with high stability and activity, but a high cost. Further optimization of the catalyst is limited by the lack of understanding of catalytic behaviors at the acid-IrO 2 interface. Here, in strong interaction with the experiment, we develop an explicit model based on grand-canonical density function theory (GC-DFT) calculations to describe acidic OER over IrO 2 . Compared to the explicit models reported previously, hydronium cations (H 3 O + ) are introduced at the electrochemical interface in the current model. As a result, a variation in stable IrO 2 surface configuration under the OER operating condition from previously proposed complete *O-coverage to a mixture coverage of *OH and *O is revealed, which is well supported by in situ Raman measurements. In addition, the accuracy of predicted overpotential is increased in comparison with the experimentally measured. More importantly, in this study, an alteration of the potential limiting step from previously identified *O→*OOH to *OH→*O is observed, which opens new opportunities to advance the IrO 2 -based catalysts for acidic OER.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗