Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DERS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Grippers Based on Opposing Van Der Waals Adhesive Pads

Novel gripping structures based on van der Waals adhesive forces are disclosed. Pads covered with fibers can be activated in pairs by opposite forces, thereby enabling control of the adhesive force in an ON or OFF state. Pads can be used in groups, each comprising a group of opposite pads. The adhesive structures enable anchoring forces that can resist adverse forces from different directions. The adhesive structures can be used to enable the operation of robots on surfaces of space vehicles.

Parness, Aaron↗
DOE OSTI2023

Online Model-Free Chance-Constrained Distribution System Voltage Control Using DERs: Preprint

This paper proposes an online data-driven distributed energy resource management system (DERMS) optimization method using chance-constrained formulation to address distribution system voltage regulation. This is achieved via the local sensitivity factor (LSF)-enabled reformulation of the DER control into a linear programming (LP) problem, which is easy and computationally efficient to solve. The LSF is estimated using online measurements and does not need the assumption of node load information. The latter is usually required for existing optimization-based methods but is difficult to obtain in practice. To mitigate measurement uncertainties, a scenario-based chance-constrained formulation is constructed. Compared with other control methods, the results carried out in a realistic distribution system show that the proposed method can effectively eliminate voltage violation issues.

chance-constrained optimization↗
DOE OSTI2024

Threats to DERs and Tools to Mitigate Them

As the pace of renewable energy development increases, so does the challenge and opportunity to develop innovative solutions to secure renewable technologies. Four national laboratories National Renewable Energy Laboratory, Sandia National Laboratories, Pacific Northwest National Laboratory, and Idaho National Laboratory are working together to increase cybersecurity maturity levels for solar stakeholders. INL will discuss a DER threat briefing and operator tools and training developed under the Securing Solar for the Grid (S2G) project.

14 SOLAR ENERGY↗
DOE OSTI2020

Controllers for Distributed Grid Support for Power Systems using Hybrid DER plants with Electrolyzers [SWR-20-06]

This software presents the design and control for a hybrid DER site with integrated dispatchable electrolyzers. It is a comprehensive solution for regulating the dispatch of electrolyzer demand to support the grid using the respective control functions. Multiple control functions (ramp control, frequency support control, dispatch prioritization) are developed to integrate the proposed site for multiple services around load, voltage and frequency control. This allows the site owners to participate in both distribution and bulk system energy markets for grid ancillary services.

Jain, Rishabh↗
DOE OSTI2022

Topological Antiferromagnetic Van der Waals Phase in Topological Insulator/Ferromagnet Heterostructures Synthesized by a CMOS-Compatible Sputtering Technique

Breaking time-reversal symmetry by introducing magnetic order, thereby opening a gap in the topological surface state bands, is essential for realizing useful topological properties such as the quantum anomalous Hall and axion insulator states. In this work, a novel topological antiferromagnetic (AFM) phase is created at the interface of a sputtered, c-axis-oriented, topological insulator/ferromagnet heterostructure—Bi 2 Te 3 /Ni 80 Fe 20 because of diffusion of Ni in Bi 2 Te 3 (Ni-Bi 2 Te 3 ). The AFM property of the Ni-Bi2Te3 interfacial layer is established by observation of spontaneous exchange bias in the magnetic hysteresis loop and compensated moments in the depth profile of the magnetization using polarized neutron reflectometry. Analysis of the structural and chemical properties of the Ni-Bi2Te3 layer is carried out using selected-area electron diffraction, electron energy loss spectroscopy, and X-ray photoelectron spectroscopy. These studies, in parallel with first-principles calculations, indicate a solid-state chemical reaction that leads to the formation of Ni=Te bonds and the presence of topological antiferromagnetic (AFM) compound NiBi 2 Te 4 in the Ni-Bi 2 Te 3 interface layer. The Neél temperature of the Ni-Bi 2 Te 3 layer is ≈ 63 K, which is higher than that of typical magnetic topological insulators (MTIs). The presented results provide a pathway toward industrial complementary metal-oxide-semiconductor (CMOS)-process-compatible sputtered-MTI heterostructures, leading to novel materials for topological quantum devices.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Room-Temperature, Current-Induced Magnetization Self-Switching in A Van Der Waals Ferromagnet

2D layered materials with broken inversion symmetry are being extensively pursued as spin source layers to realize high-efficiency magnetic switching. Such low-symmetry layered systems are, however, scarce. In addition, most layered magnets with perpendicular magnetic anisotropy show a low Curie temperature. Here, in this study, the experimental observation of spin–orbit torque magnetization self-switching at room temperature in a layered polar ferromagnetic metal, Fe 2.5 Co 2.5 GeTe 2 is reported. The spin–orbit torque is generated from the broken inversion symmetry along the c-axis of the crystal. These results provide a direct pathway toward applicable 2D spintronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Twisted cuprate van der Waals heterostructures with controlled Josephson coupling

Twisted van derWaals (vdW) heterostructures offer a unique platform for engineering the efficient Josephson coupling between cuprate thin crystals harboring the nodal superconducting order parameter. Preparing the vdW heterostructures-based Josephson junction comprising stacked cuprates requires maintaining an ordered interface with preserved surface superconductivity. Here, we report the preparation of the Josephson junction out of the stacked Bi 2 Sr 2 CaCu 2 O 8+d crystals using the cryogenic dry transfer technique and encapsulating the junction with an insulating layer, that protects the interface during the electrical contacts evaporation at the 1×10 -6 mbar base pressure. We find that the Josephson critical current $I$ c has a maximum at low twist angles, comparable to that of the bulk intrinsic Josephson junctions, and is reduced by two orders of magnitude at twist angles close to 45°. In conclusion, the reduction of $I$ c occurs due to a mismatch between superconducting $d$-wave order parameters, which suppresses the direct Cooper pair tunneling.

2D materials↗
DOE OSTI2024

Spin-dependent electron transfer in electrochemically transparent van der Waals heterostructures for oxygen evolution reaction

Spin selective catalysis is an emerging approach for improving the thermodynamics and kinetics of reactions. The role of electron spins has been scarcely studied in catalytic reactions. One exception is the oxygen evolution reaction (OER) where strongly correlated metals and oxides are used as catalysts. In OER, spin alignment facilitates the transition of singlet state of the reactant to the triplet state of O 2 . However, the influence of strong correlations on spin exchange mechanism and spin selective thermodynamics of most catalytic reactions remain unclear. Here we decouple the strongly correlated catalyst from the electrolyte to study spin exchange in two-dimensional (2D) magnetic iron germanium telluride (FGT) heterostructure. We demonstrate that transmission of spin and electrochemical information between the catalyst and the reactant can occur through quantum exchange interaction despite the catalyst of FGT being completely encapsulated by graphene or hexagonal boron nitride (hBN). The strong correlations in FGT that lead to enhanced spin exchange in OER are observed in graphene or hBN layers with thicknesses of up to 6 nm. We demonstrate that spin alignment in FGT leads to a lowering of thermodynamic barrier for adsorption of hydroxide ion and electron transfer to the catalyst. This results in up to fivefold enhancement in OER performance and improved kinetics. Our results provide clear evidence that transmission of both quantum mechanical and electrochemical information through quantum spin exchange interaction in FGT leads to an enhancement in catalytic performance.

2D materials↗
DOE OSTI2021

Twist-Angle-Dependent Ultrafast Charge Transfer in MoS 2 -Graphene van der Waals Heterostructures

Vertically stacked transition metal dichalcogenide-graphene heterostructures provide a platform for novel optoelectronic applications with high photoresponse speeds. Photoinduced nonequilibrium carrier and lattice dynamics in such heterostructures underlie these applications but have not been understood. In particular, the dependence of these photoresponses on the twist angle, a key tuning parameter, remains elusive. Here, using ultrafast electron diffraction, we report the simultaneous visualization of charge transfer and electron–phonon coupling in MoS 2 -graphene heterostructures with different stacking configurations. We find that the charge transfer timescale from MoS 2 to graphene varies strongly with twist angle, becoming faster for smaller twist angles, and show that the relaxation timescale is significantly shorter in a heterostructure as compared to a monolayer. These findings illustrate that twist angle constitutes an additional tuning knob for interlayer charge transfer in heterobilayers and deepen our understanding of fundamental photophysical processes in heterostructures, of importance for future applications in optoelectronics and light harvesting.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Nonlinear van der Waals Metasurfaces with Resonantly Enhanced Light Generation

Efficient nonlinear wave mixing is of paramount importance for a wide range of applications. However, weak optical nonlinearities pose significant challenges for accessing nonlinear light–matter interaction in compact systems. Here, we experimentally study second harmonic generation in deeply subwavelength 3R-MoS 2 metasurfaces (<λ/13 thick). Our measurements, supported by theoretical analysis, reveal a complex interplay and coupling between geometric resonances, optical extinction, and exciton-driven strong nonlinear susceptibility dispersion. We further demonstrate >150-fold enhancement in second harmonic signal at 740 nm mediated by the A exciton resonance. Additionally, our theoretical studies predict an enhancement of more than 10 6 in second harmonic generation in <100 nm thick structures exhibiting bound states in the continuum resonance. These findings provide insight into accessing and harnessing the unprecedented 3R-MoS 2 nonlinearities at a subwavelength scale, paving the way to ultracompact nonlinear photonic devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Synthesis, Crystal Growth, and Transport Properties of van der Waals Tetrel Pnictide GeAs 2

Here, bulk GeAs 2 was synthesized utilizing a vapor transport reaction with iodine. Thermal stability tests under dynamic conditions show that GeAs 2 decomposes below 700 K, in contrast to the reported congruent melting at 1029 K measured at saturated As vapor pressure. GeAs 2 is a p-type narrow bandgap (~0.4 eV) semiconductor. From a thermoelectric standpoint, GeAs 2 outperforms previous computational predictions in thermopower and thermal conductivity. Yet, electrical resistivity is significantly higher than predicted values, resulting in the low overall thermoelectric figure of merit. Aliovalent doping strategies for GeAs 2 should be developed to achieve reasonable thermoelectric performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

van der Waals Epitaxy, Superlubricity, and Polarization of the 2D Ferroelectric SnS

Tin monosulfide (SnS) is a two-dimensional layered semiconductor that exhibits in-plane ferroelectric order at very small thicknesses and is of interest in highly scaled devices. Here, in this study, we report the epitaxial growth of SnS on hexagonal boron nitride (hBN) using a pulsed metal-organic chemical vapor deposition process. Lattice matching is observed between the SnS($100$) and hBN{$1\bar{10}$} planes, with no evidence of strain. Atomic force microscopy reveals superlubricity along the commensurate direction of the SnS/hBN interface, and first-principles calculations suggest that friction is controlled by the edges of the SnS islands, rather than interface interactions. Differential phase contrast imaging detects remnant polarization in SnS islands with domains that are not dictated by step-edges in the SnS. The growth of ferroelectric SnS on high quality hBN substrates is a promising step toward electrically switchable ferroelectric semiconducting devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗