SEARCH · Engineering Papers

Results for “Convolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

All sources NASA NTRS DOE OSTI

NASA NTRS1980

Scale effects: HCMM data simulation. Usage of filtering techniques for scaling-up simulations

Image reduction used to simulate increase in altitude of an acquisition platform is equivalent to data smoothing, and can be achieved either by neighborhood averaging or by filtering techniques. The averaging approach is limited for accurate simulation. A filtering method is described which was based on the hypothesis that all changes due to altitude increase can be represented by a point spread function. Determination of the scale function and factor are discussed as well as implementation of the filtering. Filtering can be either in the spatial or frequency domain. In the spatial domain, filtering consists of the convolution of the image with the weights mask, and then of the declination of the points according to the appropriates scale factor. A simulation of an aircraft day image in the infrared channel is examined.

Digennaro, V.↗

NASA NTRS1980

Spatial frequency response of an optical heterodyne receiver

The analysis of a passive heterodyne receiver with respect to its imaging performance (transfer function) and its heterodyne efficiency shows departures from the results which are obtained in strictly coherent or incoherent imaging systems. The cascading property of modulation transfer function analysis must be carefully applied, since the coherent transfer function of the optical receiver and that due to the local oscillator-detector combination are not separable but are related by the convolution of their products. Application of these results to a spacelab-type optical heterodyne receiver shows that resolutions of the order of 1.5 to 2.0 km are possible for worst-case type orbital scenarios. In addition to an analysis of the derogatory effects of sampling (aliasing) a comparison of obscured-type receivers (e.g., Cassegrains) with unobscured receivers shows that both resolution and efficiency are severly degraded in an obscured-type receiver and, consequently, should not be used for passive heterodyne detection schemes.

Robinson, D. M.↗

NASA NTRS1981

On the complex state of the interplanetary medium of 28-29 July 1977

Observations of plasma and magnetic field variations in the near-Earth solar wind are discussed. Both a corotating stream and a driven shock are present. The driver gas seems to be enveloped in the rising speed phase of this stream; this appearance is attributed to a convoluted surface separating the two plasma domains. The magnetic field in the post shock flow (0030-1230 UT of July 29) has a large and geoeffective southward component at times; the energy coupling coefficient reaches approximately 5.4 x 10 to the 19th power ergs/s. In the driver gas (1230 UT of July 29 to 0110 of July 30) the magnetic field is dominantly northward. The density and dynamic pressure decrease by almost two orders of magnitude (100 to 2 cm/3) from just behind the interplanetary shock to approximately 3 hours into the driver gas flow. The dominant magnetic field variation in the driver gas is modeled by a cloud-like structure. Significant plasma parameter variations within the driver gas are attributed to structure in the parent solar mass ejection event and to interplanetary kinematics.

King, J. H.↗

NASA NTRS1981

Scatter of X-rays on polished surfaces

In investigating the dispersion properties of telescope mirrors used in X-ray astronomy, the slight scattering characteristics of X-ray radiation by statistically rough surfaces were examined. The mathematics and geometry of scattering theory are described. The measurement test assembly is described and results of measurements on samples of plane mirrors are given. Measurement results are evaluated. The direct beam, the convolution of the direct beam and the scattering halo, curve fitting by the method of least squares, various autocorrelation functions, results of the fitting procedure for small scattering, and deviations in the kernel of the scattering distribution are presented. A procedure for quality testing of mirror systems through diagnosis of rough surfaces is described.

Hasinger, G.↗

NASA NTRS1981

A computer program for estimating the power-density spectrum of advanced continuous simulation language generated time histories

A computer program for performing frequency analysis of time history data is presented. The program uses circular convolution and the fast Fourier transform to calculate power density spectrum (PDS) of time history data. The program interfaces with the advanced continuous simulation language (ACSL) so that a frequency analysis may be performed on ACSL generated simulation variables. An example of the calculation of the PDS of a Van de Pol oscillator is presented.

Dunn, H. J.↗

NASA NTRS1981

The effect of noisy carrier reference on telemetry with baseband arraying

Imperfect carrier reference causes a degradation in detection performance in coherent communication systems. A measure of this degradation is the radio loss, which is the amount of increase in data signal to noise ratio (SNR) per bit required to achieve the same bit error rate when carrier reference is perfect. Performance analysis and numerical results are obtained for the Voyager high rate telemetry link with maximum likelihood convolutional decoding. The arraying of antennas provides not only improved performance due to an increase in effective antenna aperture, but also a decrease in radio loss with respect to a single antenna. This telemetry link performance improvement is a function of the carrier loop SNR and data bit error rate. When the carrier loop SNR's are low, it provides a significant improvement in the telemetry link performance since the decrease in radio loss with respect to a single station is substantial.

Divsalar, D.↗

NASA NTRS1981

On counters used for node synchronization

A suboptimal quick look decoding algorithm for the deep space network convolutional code is discussed. Particular emphasis is given to the encoding and decoding schemes.

Greenhall, C. A.↗

NASA NTRS1981

The effects of receiver tracking phase error on the performance of the concatenated Reed-Solomon/Viterbi channel coding system

Analytical and experimental results are presented of the effects of receiver tracking phase error, caused by weak signal conditions on either the uplink or the downlink or both, on the performance of the concatenated Reed-Solomon (RS) Viterbi channel coding system. The test results were obtained under an emulated S band uplink and X band downlink, two way space communication channel in the telecommunication development laboratory of JPL with data rates ranging from 4 kHz to 20 kHz. It is shown that, with ideal interleaving, the concatenated RS/Viterbi coding system is capable of yielding large coding gains at very low bit error probabilities over the Viterbi decoded convolutional only coding system. Results on the effects of receiver tracking phase errors on the performance of the concatenated coding system with antenna array combining are included.

Liu, K. Y.↗

NASA NTRS1980

The impact of pulsed RFI on the coded BER performance of the nonlinear satellite communication channel

Communication links from low orbiting spacecraft to a central ground station, via satellite repeater, may be susceptible to significant performance degradation if high-level, pulsed radio frequency interference (RFI) must be contended with. The present paper examines the coded bit error rate (BER) performance of a communication system in which BPSK modulation is employed, pulsed CW or pulsed noise RFI is present, and the transponder contains a nonlinearity characterized by arbitrary AM/AM and AM/PM characteristics. A major result of this paper is an analytic method for determining soft decision statistics of the receiver demodulator output, in which pulsed RFI effects are accounted for. It is demonstrated that this result can be analytically applied to the approximate determination of the BER at the output of a Viterbi decoder, when convolutional coding is employed.

Weinberg, A.↗

NASA NTRS1981

Upstream particle spatial gradients and plasma waves

The upstream electron and ion fluxes detected by our experiment on ISEE 1/2 spacecraft undergo frequent time variations, from a few seconds to minutes. Many flux variations correlate with directional changes of the interplanetary magnetic field (IMF). Particles propagating in the upstream region acted on by the solar wind electric field creates a quasi-stationary particle pattern in space. Evidently, the spacecraft frequently crosses the boundaries of these particle patterns. The present analysis strongly suggests that the particle time variations are usually spatial variations that have been convoluted into our data. Estimates of the thickness of the particle boundaries deduced is greater than or approximately equal to the Larmor radius (for both the upstream electron and the ion events). Plasma waves are observed in association with the upstream particle fluxes and a correlation between the amplitudes and the particle boundaries is suggested. We will theoretically show that the ion and electron density gradients across the boundary play an important role in exciting the ion acoustic-like and plasma waves.

Parks, G. K.↗

NASA NTRS1981

Submillisecond measurements of system optical modulation functions in mosaic focal plane arrays

Measurements of system optical modulation functions (MTF, SWR) may be distorted by time-dependent environmental effects (thermal, vibration, flexure) and by electronics drift. Fast data collection may therefore be advantageous by minimizing drift time. The problem of fast data collection is accentuated when modulation data must be taken on a large number of detectors in a focal plane array. A method has been developed for the generation and storage of knife edge data from focal plane arrays, where data collection time per detector is in the submillisecond range. Once knife edge collects are completed, MTF response is found using conventional convolution techniques. SWR is obtained directly from knife edge response using a computerized simulation algorithm which bypasses use of MTF harmonics. Requirements for detector electronics speed, damping, and dynamic range are considered.

Thurlow, P. E.↗

NASA NTRS1981

Atmospheric corrections to satellite radiometric data over rugged terrain

Radiometric measurements from satellites in the solar portion of the electromagnetic spectrum can be converted to measurements of surface exitance. Over rugged terrain, the satellite image must be precisely registered to a terrain data set. For small areas a first-order polynomial interpolation scheme is generally satisfactory for the geometric rectification. If there are saturated pixels, a nearest-neighbor procedure is used for the interpolated satellite radiance numbers; otherwise a cubic-convolution algorithm is used. Path radiance and path transmittance are calculated with a simple spectral model, which requires an estimate of the water vapor and aerosol content of the atmosphere.

Dozier, J.↗

NASA NTRS1981

A quick-look decoder with isolated error correction and node synchronization

It is noted that in a low-noise environment, a simple inversion circuit can be used for quick-look decoding of a convolutional code. An improvement in the bit error performance of the raw inversion circuit is effected by a simple pattern-recognition technique operating on the syndrome stream, which is also used to acquire node sync.

Greenhall, C. A.↗

NASA NTRS1981

A unique method to study acoustic transmission through ducts using signal synthesis and averaging of acoustic pulses

An acoustic impulse technique using a loudspeaker driver is developed to measure the acoustic properties of a duct/nozzle system. A signal synthesis method is used to generate a desired single pulse with a flat spectrum. The convolution of the desired signal and the inverse Fourier transform of the reciprocal of the driver's response are then fed to the driver. A signal averaging process eliminates the jet mixing noise from the mixture of jet noise and the internal noise, thereby allowing very low intensity signals to be measured accurately, even for high velocity jets. A theoretical analysis is carried out to predict the incident sound field; this is used to help determine the number and locations of the induct measurement points to account for the contributions due to higher order modes present in the incident tube method. The impulse technique is validated by comparing experimentally determined acoustic characteristics of a duct-nozzle system with similar results obtained by the impedance tube method. Absolute agreement in the comparisons was poor, but the overall shapes of the time histories and spectral distributions were much alike.

Salikuddin, M.↗

NASA NTRS1981

SAR processing on the MPP

The processing of synthetic aperture radar (SAR) signals using the massively parallel processor (MPP) is discussed. The fast Fourier transform convolution procedures employed in the algorithms are described. The MPP architecture comprises an array unit (ARU) which processes arrays of data; an array control unit which controls the operation of the ARU and performs scalar arithmetic; a program and data management unit which controls the flow of data; and a unique staging memory (SM) which buffers and permutes data. The ARU contains a 128 by 128 array of bit-serial processing elements (PE). Two-by-four surarrays of PE's are packaged in a custom VLSI HCMOS chip. The staging memory is a large multidimensional-access memory which buffers and permutes data flowing with the system. Efficient SAR processing is achieved via ARU communication paths and SM data manipulation. Real time processing capability can be realized via a multiple ARU, multiple SM configuration.

Batcher, K. E.↗

NASA NTRS1981

Modulation/demodulation techniques for satellite communications. Part 1: Background

Basic characteristics of digital data transmission systems described include the physical communication links, the notion of bandwidth, FCC regulations, and performance measurements such as bit rates, bit error probabilities, throughputs, and delays. The error probability performance and spectral characteristics of various modulation/demodulation techniques commonly used or proposed for use in radio and satellite communication links are summarized. Forward error correction with block or convolutional codes is also discussed along with the important coding parameter, channel cutoff rate.

Omura, J. K.↗

NASA NTRS1982

Sideband-aided receiver arraying

Efforts to increase the amount of data that can be received from outer planet missions by coherently combining signals from ground antennas in such a way as to increase the total effective aperture of the receiving system are discussed. As these signals become weaker, the baseband arraying technique in current use degrades somewhat due to carrier jitter. One solution to this problem is Sideband-Aided Receiver Arraying (SARA). In SARA, sidebands demodulated to baseband in a master receiver at the largest antenna are used to allow slave receivers in the other antennas to track the sideband power in the signal rather than the carrier power. The already existing receivers can be used in the slaves to track and demodulate the signals in either a residual carrier or a suppressed carrier environment. The resultant baseband signals from all the antennas can then be combined using existing baseband combining equiment. Computer simulations of SARA show increases in throughput (measured in data bits per second) over baseband-only combining 17 percent at Voyager 2 Uranum encounter and 31 percent at Neptune for a four-element antenna array and (7, 1/2) convolutional coding.

Butman, S. A.↗

NASA NTRS1981

Optimal spatial filtering and transfer function for SAR ocean wave spectra

The impulse response of the SAR system is not a delta function and the spectra represent the product of the underlying image spectrum with the transform of the impulse response which must be removed. A digitally computed spectrum of SEASAT imagery of the Atlantic Ocean east of Cape Hatteras was smoothed with a 5 x 5 convolution filter and the trend was sampled in a direction normal to the predominant wave direction. This yielded a transform of a noise-like process. The smoothed value of this trend is the transform of the impulse response. This trend is fit with either a second- or fourth-order polynomial which is then used to correct the entire spectrum. A 16 x 16 smoothing of the spectrum shows the presence of two distinct swells. Correction of the effects of speckle is effected by the subtraction of a bias from the spectrum.

Beal, R. C.↗